Scribd
Upload
4 views

ALL RESULTS COMPILED

The document presents machining parameters for AISI 1045 steel using various uncoated tungsten carbide tools under both cold and hot conditions. It includes details such as cutting velocity, depth of cut, workpiece temperature, and feed rate for different tool configurations. The parameters vary between cold and hot machining, affecting the performance and outcomes of the machining process.

Uploaded by

yash gupta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4 views

ALL RESULTS COMPILED

The document presents machining parameters for AISI 1045 steel using various uncoated tungsten carbide tools under both cold and hot conditions. It includes details such as cutting velocity, depth of cut, workpiece temperature, and feed rate for different tool configurations. The parameters vary between cold and hot machining, affecting the performance and outcomes of the machining process.

Uploaded by

yash gupta
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

COLD MACHINING OF AISI 1045 STEEL USING CNMG 12 04 04 UNCOATED TUNGSTEN CARBIDE

TOOL

CUTTING VELOCITY= 227m/s; DEPTH OF CUT= 0.3m; WORKPIECE TEMPERATURE =20°C; FEED=
0.432mm/rev

HOT MACHINING OF AISI 1045 STEEL USING CNMG 12 04 04 UNCOATED TUNGSTEN


CARBIDE TOOL
CUTTING VELOCITY= 227m/s; DEPTH OF CUT= 0.3m; WORKPIECE TEMPERATURE =300°C;
FEED= 0.432mm/rev
COLD MACHINING OF AISI 1045 STEEL USING CNMG 12 04 08 UNCOATED TUNGSTEN
CARBIDE TOOL
CUTTING VELOCITY= 256m/s; DEPTH OF CUT= 0.6m; WORKPIECE TEMPERATURE =20°C;
FEED= 0.203mm/rev

HOT MACHINING OF AISI 1045 STEEL USING CNMG 12 04 08 UNCOATED TUNGSTEN


CARBIDE TOOL
CUTTING VELOCITY= 256m/s; DEPTH OF CUT= 0.6m; WORKPIECE TEMPERATURE =300°C;
FEED= 0.203mm/rev
COLD MACHINING OF AISI 1045 STEEL USING DNMG 15 04 12 UNCOATED TUNGSTEN
CARBIDE TOOL
CUTTING VELOCITY= 285m/s; DEPTH OF CUT= 0.6m; WORKPIECE TEMPERATURE =20°C;
FEED= 0.318mm/rev

HOT MACHINING OF AISI 1045 STEEL USING DNMG 15 04 12 UNCOATED TUNGSTEN


CARBIDE TOOL
CUTTING VELOCITY= 285m/s; DEPTH OF CUT= 0.6m; WORKPIECE TEMPERATURE =300°C;
FEED= 0.318mm/rev
COLD MACHINING OF AISI 1045 STEEL USING DNMG 15 04 04 UNCOATED TUNGSTEN
CARBIDE TOOL
CUTTING VELOCITY= 227m/s; DEPTH OF CUT= 0.45m; WORKPIECE TEMPERATURE =20°C;
FEED= 0.203mm/rev

HOT MACHINING OF AISI 1045 STEEL USING DNMG 15 04 04 UNCOATED TUNGSTEN


CARBIDE TOOL
CUTTING VELOCITY= 227m/s; DEPTH OF CUT= 0.45m; WORKPIECE TEMPERATURE =300°C;
FEED= 0.203mm/rev

You might also like