IF IN DOUBT ASK!

i 1.00 X

98 SEGMENTS REQUIRED

TYP 4 PLACES 3
3

TYP 3

n 1.00 X

1
112 YP
T

5 LATE
P
1:15

TH
CERTIFIED COPY

ICK
ESSN
APPROVED FOR MANUFACTURING

4 5°
4 STIFFENERS BISHWARUP DUTTA
200mm X 1125mm LONG (LEAD ENGINEER)
MACHINE BOTTOM EDGE
TO SUIT SEGMENT PROFILE 7/01/2025

PLATE THICKNESS
X
r 0.5

5 2270
2269
5
2690 PLATE THICKNESS
Hole X Y
98,3 188,4 98,3 1.1 137.993 mm -51.548 mm
TYP
27609 1.2 413.700 mm -63.930 mm
275
1.3 688.574 mm -88.669 mm

200
1.4 962.061 mm -125.715 mm

100
24 HOLES 1.5 1233.611 mm -174.994 mm
DRILL O22 THROUGH
R 6200

SPACED AS SHOWN 1.6 1502.677 mm -236.405 mm

40
R 6000

R 6005

REPEAT ON OPPOSITE FLANGE 1.7 1768.717 mm -309.827 mm

1.8 2031.195 mm -395.110 mm
n 1.00 X 26710 1.9 2289.582 mm -492.083 mm
267
20 HOLES
1.10 2543.358 mm -600.551 mm
2 ROWS OF 10 25,71°
DRILL O22 THROUGH 1.11 135.749 mm -151.523 mm
FIRST ROW ON O12300 PCD
SECOND ROW ON O12100 PCD 1.12 406.973 mm -163.704 mm
EQUALLY SPACED AS SHOWN
Y1

1.13 677.378 mm -188.040 mm

REPEAT ON OPPOSITE FLANGE X1
0, 0 1.1
1.14 946.418 mm -224.484 mm
1.2 1.3
1.11 1.12
1.4 1.15 1213.553 mm -272.961 mm
1.13 1.5
1.14 1.6 1.16 1478.243 mm -333.374 mm
1.15
1.16 1.7
1.17 1739.957 mm -405.602 mm
1.17 1.8
1.18 1.9 1.18 1998.167 mm -489.498 mm
1.19 1.10 1.19 2252.353 mm -584.895 mm
NOTES: 1.20 1.20 2502.003 mm -691.599 mm
1. SURFACE FINISH TO BE UNO
2. DIMENSIONS IN BRACKET ARE FOR REFERENCE PURPOSES ONLY, 3rd ANGLE PROJECTION MATERIAL & HEAT TREATMENT
DO NOT USE TO MANUFACTURE. BOLT HOLE COORDINATES CONFIDENTIAL AND PROPRIETARY TO
DAVID BROWN SANTASALO AUSTRALIA PTY LTD MILD STEEL PLATE
3. REMOVE ALL BURRS AND SHARP EDGES. ABN 15 000 008 640
ALL RIGHT RESERVED AND ASSERTED, WITHOUT THE PRIOR PERMISSION OF
AS3678-9 - 250 MASS (kg) 349 kg TITLE
4. ALL WELDS TO AS1554 SP. 3mm CONTINOUS FILLET WELD DAVID BROWN SANTASALO AUSTRALIA PTY LTD. NO PART OF THIS DOCUMENT MAY
BE USED, ALTERED ADAPTED, PUBLISHED, REPRODUCED OR TRANSMITTED IN ANY FORM
OR MEDIUM. ALL DOCUMENTS CONTAINED IN THIS TRANSACTION MUST BE DESTROYED
SCALE 1 : 12
TUNNEL SHELL SEGMENT
5. GENERAL FABRICATION TOLERANCE TO AS1100.201 TABLE 'A' COURSE UPON COMPLETION OF THE CONTRACT OR IMMEDIATELY IF UNSUCESSFULL.

COMMERCIAL TOLERANCES OF MACHINED DIMENSIONS DRAWN S. MOSTON

C PLATE THICKNESS WAS 4MM, NOW 5MM 7/1/25 SM
6. SHOT BLAST TO REMOVE SCALE & DIRT. UNLESS OTHERWISE SPECIFIED
DATE 26/06/2024 SIZE DWG NO ISSUE

7. PAINT TO DBGI SPEC. P09.10.201 APPENDIX E ISSUE REV DESCRIPTION DATE CKD
NOMINAL
SIZE
OVER 6
TO 30
OVER 30 OVER 120 OVER 315 OVER 1000
TO 120 TO 315 TO 1000 TO 2000 CHECKED BD A1 P37589 C
REVISION DETAILS FINE +/- 0.2 +/- 0.3 +/- 0.5 +/- 0.8 +/- 1.2 REF DRG No. APPROVED 26/06/2024 FILE NAME: P37589 rev C.dft SHEET 1 OF 1
SNOW TUNNEL