5/23/25, 10:24 AM VFD Interview Questions and Answers - Electrical Drives

🔥 4-20 mA PLC Course – Special Offer!👉 Register Now

Pages

Inst Tools Menu

₹3.61L ₹4.59L ₹4.58L

VFD Interview Questions and Answers – Electrical

Drives
by Viral Nagda

WhatsApp Facebook LinkedIn Twitter Email

In Industrial Automation, Variable Frequency Drive is one of the most used devices for controlling the motor. VFD is

an electronic equipment which varies the speed of the motor by varying its frequency. VFD finds its use in many

applications due to this. It would be interesting to know that there are many jobs available in the market which purely
caters to knowledge of VFD.

So, many times, candidates face unexpected questions during interviews, which they face difficulties in answering. So,

it is necessary to have a general overview of types of questions asked during interviews.

Table of Contents

VFD Questions

https://instrumentationtools.com/vfd-interview-questions/ 1/10
5/23/25, 10:24 AM VFD Interview Questions and Answers - Electrical Drives

In this post, we will see some general and unusual types of questions asked during interviews related to VFD.

Difference between a Soft starter and a VFD?

VFD can vary the frequency of a motor, but a soft starter cannot do it. Yes, they both have the same function of
smoothly starting or stopping a motor by varying its acceleration and deceleration time, but a VFD only can vary the

speed of the motor. A soft starter cannot do it.

Ad removed. Details

What are the Loads used in VFD?

There are two types of loads used in VFD – constant torque and variable torque. In constant torque, the torque

remains constant irrespective of the speed. Some general examples are drum-hoist, conveyors, and traction drives.

https://instrumentationtools.com/vfd-interview-questions/ 2/10
5/23/25, 10:24 AM VFD Interview Questions and Answers - Electrical Drives

The torque mostly varies based on the load capacity, and not on speed. In variable torque, the torque varies based on

speed. Some general examples are centrifugal pumps, blowers, and fans.

Here, when running at low speeds, the power required for load is also less and thus, the toque is also less. The same

condition applies at high speeds which causes higher torque.

What type of motor is compatible with VFD?

Motor manufacturers give a name called inverter rated in their nameplates. This means they are compatible with

VFD. If you see names like CT (constant torque), VT (variable torque), PWM (pulse width modulation), then this means

they can be run with a VFD.

https://instrumentationtools.com/vfd-interview-questions/ 3/10
5/23/25, 10:24 AM VFD Interview Questions and Answers - Electrical Drives

Which is the main semiconductor responsible for the operation of VFD?

IGBT (insulated gate bipolar transistor) is the semiconductor used in VFD operation. This is because they have the

highest switching speed among all semiconductors and it can be done multiple times at a great frequency, as

compared to other ones like BJT, Triac, and MOSFET.

Can a VFD convert a single phase to three phases?

Yes. But remember that it cannot convert single-phase AC voltage to a voltage higher than that, which many will think

when reading the question itself.

https://instrumentationtools.com/vfd-interview-questions/ 4/10
5/23/25, 10:24 AM VFD Interview Questions and Answers - Electrical Drives

VFD converts it into a DC voltage through a single-phase rectifier circuit and then inverts the DC voltage into 3-phase

AC supply through a three-phase inverter bridge. The motor will get its output accordingly, but it will be not a 440V
motor. It is a low-voltage three-phase motor.

What are the main elements of a VFD?

The main elements of VFD working are – the rectifier, DC bus, inverter, PWM controller, and filter. First, the AC
voltage is converted to DC voltage through a rectifier, which is stored in a capacitor bank or DC bus.

The inverter again converts DC voltage to AC voltage, and the output voltage is modulated by varying the pulse of

the waveform through IGBT. The filter will remove high-frequency noise from the output voltage.

What are the factors to consider while choosing a VFD?

Some general factors to be considered are motor power rating, torque requirements of the load, environmental

factors and conditions, speed range required by the motor, and motor duty cycle.

What use is of motor derating in VFD?

Motor derating means choosing a motor at a lower rated power output than the VFD input power and this helps in
avoiding motor overheating, increasing the motor’s reliability, reducing motor failures, and lengthening the life of the

motor.

Is PID function in VFD?

Yes, the PID function is available in VFD. You can connect analog inputs to the VFD and tune PID parameters inside

the VFD program, to vary the motor speed. This is the same that you do in a PLC, thus eliminating additional PID

programming in a PLC.

https://instrumentationtools.com/vfd-interview-questions/ 5/10
5/23/25, 10:24 AM VFD Interview Questions and Answers - Electrical Drives

Can a VFD control multiple motors?

A VFD can control multiple motors subject to the following three conditions – the motors must run at the same

speed, failure signals should also be taken from multiple motors (this is because VFD is one and it is not possible to

detect failure in which motor), and VFD must be upsized as compared to the motors (this means the HP rating of VFD
must be higher than HP ratings of total motors combined).

Are communication protocols available in VFD?

Yes, common PLC communication protocols available for data exchange in VFD are Modbus RTU, Ethernet, Can Open,

Profinet, and Profibus.

What is the encoder checking function in VFD?

Some motors have an encoder connected with it for monitoring actual speed. This encoder signal is taken into VFD

and the VFD checks whether the motor is running at the desired speed by checking encoder counts. Many functions

for encoders are available in VFD for properly controlling the motor.

Which of the following loads is used with VFD – resistive, capacitive, or

inductive?
The inductive load is used with VFD, as motors require a certain amount of current to establish a magnetic field
before they can start running, and VFD does this job by varying acceleration time. Also, the output waveform of VFD

is not suitable for capacitive loads due to its high frequency.

What is DC injection braking in VFD?

DC injection applies DC current into the motor during the stop condition, which opposes the motor rotation and
stops the motor quickly. But it must not run for a long time, as it can damage the motor windings after prolonged

use.

What are the popular VFD brands in industries?

The most used names in the VFD market are

Danfoss,

ABB,

Yaskawa,

Schneider,

Siemens,

Rockwell,

Fuji,
Toshiba,

https://instrumentationtools.com/vfd-interview-questions/ 6/10
5/23/25, 10:24 AM VFD Interview Questions and Answers - Electrical Drives

Delta,

Mitsubishi, etc.

In this way, we saw the generally asked questions during the interview for VFD.

If you liked this article, then please subscribe to our YouTube Channel for Electrical, Electronics, Instrumentation, PLC,
and SCADA video tutorials.

You can also follow us on Facebook and Twitter to receive daily updates.

Read Next:

What is Floating Neutral?

Importance of Neutral Wire

Lithium-ion Battery Charging

Cables between VFD & Motor

Electrical Protection Relays

Share With Your Friends

WhatsApp Facebook LinkedIn Twitter Email

Don't Miss Our Updates

Be the first to get exclusive content straight to your email.

Enter your name here...

Enter your email here...

We promise not to spam you. You can unsubscribe at any time.

Subscribe Now

Electrical Q & A, PLC Tutorials

Moving Data between PLCs – Siemens Basics – TSEND TRCV
How to use PLC with SQL Database? – Basics & Tutorials

Recommended Articles
1. Advantages & Disadvantages of Air Insulated Substation

2. Transformers Interview Questions & Answers

3. Electrical Switchgear & Protection Interview Questions

https://instrumentationtools.com/vfd-interview-questions/ 7/10
5/23/25, 10:24 AM VFD Interview Questions and Answers - Electrical Drives

4. Induction Motor Interview Questions & Answers

5. Most Asked Questions on Servo Motor (Answers)

6. Electrical Engineering Interview Questions

7. Induction Motor Interview Questions Answers

8. Single Phase Induction Motors Questions and Answers

9. Top 50 Electrical Engineering Questions & Answers

10. Transmission Lines Protection Questions Answers

4 thoughts on “VFD Interview Questions and Answers – Electrical Drives”

Rohit Kumar Singh

January 12, 2024 at 5:14 am

update knowledge

Reply

ODONGO LEONE
January 15, 2024 at 1:44 pm

very good hap

Reply

ODONGO LEONE
January 15, 2024 at 1:44 pm

have liked the application

Reply

https://instrumentationtools.com/vfd-interview-questions/ 8/10
5/23/25, 10:24 AM VFD Interview Questions and Answers - Electrical Drives

ODONGO LEONE
January 15, 2024 at 1:45 pm

very interesting

Reply

Leave a Comment

Name *

Email *

Website

Subscribe to our newsletter

Post Comment

FOLLOW US

Categories

Select Category

https://instrumentationtools.com/vfd-interview-questions/ 9/10
5/23/25, 10:24 AM VFD Interview Questions and Answers - Electrical Drives

Recent Comments

Esequiel M Esquibel on Relay circuits

Nagendra on Formula for Current 4-20ma to Percentage Conversion

Eudardo Bustamante on List of 300 Industrial Instrumentation Questions

Eudardo Bustamante on Free Instrumentation Course for Trainee Engineers

khayelihle ngcobo on Free Instrumentation Course for Trainee Engineers

Ranjeet on Formulas to calculate mA from PV, LRV and URV

Sardar Ahmed on List of 300 Industrial Instrumentation Questions

More Articles

1. Transformers Questions & Answers Part-2

2. Thyristor Interview Questions & Answers

3. Electrical Motors Interview Question And Answers

4. Electrical Engineering Interview Questions

5. Basic Power Electronics Interview Questions

6. Protection Relays Interview Questions & Answers

7. Transmission Lines Protection Questions Answers

8. Electric Drives and Traction Interview Questions

9. Three Phase Induction Motor Interview Questions & Answers

10. Induction Motor Interview Questions & Answers

2025 © Reproduction without explicit permission is prohibited. - PLC SCADA Courses - Engineers Community

This site uses Google AdSense ad intent links. AdSense automatically generates these links and they may help creators earn money.

https://instrumentationtools.com/vfd-interview-questions/ 10/10