Bosch Rexroth AG

Spare parts list Service Hydraulics

Glockeraustrasse 4

Material number: R902009140 89275 Elchingen

Germany
Drawing:
+49 (0)7308/82-2126
Designation: AXIAL-PISTON PUMP
A10VG18DGM1/10R-NSC16F023S-S

Status of version: 11/2022 Date: 22.12.2022

Page: 1

Pos. Material number Designation Quantity

1 R902108155 ROTARY GROUP 1 UNIT L

2 R902136631 CONTROL 1 UNIT L
3 R902005364 CONNECTION PLATE 1 UNIT L
4 R902009101 INTERNAL GEAR PUMP 1 UNIT L
10 R902272396 HOUSING 1 UNIT
13 R902114380 PIVOT PIN 2 UNIT
14 R913009664 STRAIGHT PIN 1 UNIT
18 R902005089 SLIDER 1 UNIT
20 R909153815 SCREW PLUG 1 UNIT D
22 R909151692 SCREW PLUG 2 UNIT D
23 R909151979 SCREW PLUG 1 UNIT D
24 R909153364 SCREW PLUG 2 UNIT D
28 R909156493 NOZZLE 2 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner, Dr. Heiner Lang, Reinhard Schäfer, Dr. Marc Wucherer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Christoph Kübel
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902009140 89275 Elchingen

Germany
Drawing:
+49 (0)7308/82-2126
Designation: AXIAL-PISTON PUMP
A10VG18DGM1/10R-NSC16F023S-S

Status of version: 11/2022 Date: 22.12.2022

Page: 2

Pos. Material number Designation Quantity

31 R913016373 SLOTTED SPRING PIN 2 UNIT

41 R909154589 O-RING 1 UNIT D
98 R902095568 SEAL KIT 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner, Dr. Heiner Lang, Reinhard Schäfer, Dr. Marc Wucherer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Christoph Kübel
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902108155 89275 Elchingen

Germany
Drawing: R902039107
+49 (0)7308/82-2126
Designation: ROTARY GROUP

Status of version: 11/2022 Date: 22.12.2022

Page: 3

Pos. Material number Designation Quantity

1 R902453794 ROTARY GROUP 1 UNIT L

12 R902010796 CRADLE 1 UNIT
14 R902005492 DRIVE SHAFT 1 UNIT
17 R909413920 WIRE 2 UNIT
26 R902066598 BEARING SHELL PAIR 1 UNIT
31 R909156986 CYL. ROLLER BEARING 1 UNIT
32 R909156988 CAGE PAIR 1 UNIT
36 R909085802 RETAINING RING 1 UNIT
37 R902600112 RETAINING RING 2 UNIT
38 R902600114 SHAFT SEALING RING 1 UNIT D
98 R902002436 SEAL KIT 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner, Dr. Heiner Lang, Reinhard Schäfer, Dr. Marc Wucherer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Christoph Kübel
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902108155 89275 Elchingen

Germany
Drawing: R902039107
+49 (0)7308/82-2126
Designation: ROTARY GROUP

Status of version: 11/2022 Date: 22.12.2022

Page: 4

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner, Dr. Heiner Lang, Reinhard Schäfer, Dr. Marc Wucherer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Christoph Kübel
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902453794 89275 Elchingen

Germany
Drawing: R902404622
+49 (0)7308/82-2126
Designation: ROTARY GROUP

Status of version: 11/2022 Date: 22.12.2022

Page: 5

Pos. Material number Designation Quantity

1 R902453793 ROTARY GROUP 1 UNIT L

2 R902402907 DISTRIBUTOR PLATE 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner, Dr. Heiner Lang, Reinhard Schäfer, Dr. Marc Wucherer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Christoph Kübel
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902453794 89275 Elchingen

Germany
Drawing: R902404622
+49 (0)7308/82-2126
Designation: ROTARY GROUP

Status of version: 11/2022 Date: 22.12.2022

Page: 6

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner, Dr. Heiner Lang, Reinhard Schäfer, Dr. Marc Wucherer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Christoph Kübel
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902453793 89275 Elchingen

Germany
Drawing: R902454572
+49 (0)7308/82-2126
Designation: ROTARY GROUP

Status of version: 11/2022 Date: 22.12.2022

Page: 7

Pos. Material number Designation Quantity

1 R902400519 PISTON PAD 9 UNIT

2 R902453182 CYLINDER 1 UNIT
4 R902443840 RETAINING PLATE 1 UNIT
6 R902443448 RETAINING BALL 1 UNIT
7 R902400694 COMPRESSION SPRING 1 UNIT
9 R902400537 PRESSURE PIN 3 UNIT
10 R909156163 RETAINING RING 1 UNIT
11 R902400695 SUPPORTING DISC 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner, Dr. Heiner Lang, Reinhard Schäfer, Dr. Marc Wucherer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Christoph Kübel
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902453793 89275 Elchingen

Germany
Drawing: R902454572
+49 (0)7308/82-2126
Designation: ROTARY GROUP

Status of version: 11/2022 Date: 22.12.2022

Page: 8

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner, Dr. Heiner Lang, Reinhard Schäfer, Dr. Marc Wucherer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Christoph Kübel
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902136631 89275 Elchingen

Germany
Drawing: R902035913
+49 (0)7308/82-2126
Designation: CONTROL

Status of version: 11/2022 Date: 22.12.2022

Page: 9

Pos. Material number Designation Quantity

1 R902229568 POSITIONING PISTON 1 UNIT L

9 R902237895 SETSCREW 1 UNIT
16 R909083017 SOCKET HEAD CAP SCREW 4 UNIT
17 R902017525 HEXAGON NUT 1 UNIT
20 R909152707 SEALING NUT 1 UNIT
30 R902600556 ROD GUIDANCE RING 2 UNIT D
31 R902600126 ROD SEAL 2 UNIT D
98 R902002437 SEAL KIT 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner, Dr. Heiner Lang, Reinhard Schäfer, Dr. Marc Wucherer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Christoph Kübel
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902136631 89275 Elchingen

Germany
Drawing: R902035913
+49 (0)7308/82-2126
Designation: CONTROL

Status of version: 11/2022 Date: 22.12.2022

Page: 10

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner, Dr. Heiner Lang, Reinhard Schäfer, Dr. Marc Wucherer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Christoph Kübel
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902229568 89275 Elchingen

Germany
Drawing: RA82670819
+49 (0)7308/82-2126
Designation: POSITIONING PISTON

Status of version: 11/2022 Date: 22.12.2022

Page: 11

Pos. Material number Designation Quantity

1 R902017618 POSITIONING PISTON 1 UNIT

2 R902004596 ROD 1 UNIT
3 R902017614 COVER 1 UNIT
5 R909430938 RING 1 UNIT
5 R909430942 RING 1 UNIT
5 R909430941 RING 1 UNIT
5 R909430940 RING 1 UNIT
5 R909430939 RING 1 UNIT
5 R909430937 RING 1 UNIT
6 R902035606 SPRING DISK 1 UNIT
7 R902071141 SPACER BUSHING 1 UNIT
7 R902121369 SPACER BUSHING 1 UNIT
7 R902121370 SPACER BUSHING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner, Dr. Heiner Lang, Reinhard Schäfer, Dr. Marc Wucherer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Christoph Kübel
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902229568 89275 Elchingen

Germany
Drawing: RA82670819
+49 (0)7308/82-2126
Designation: POSITIONING PISTON

Status of version: 11/2022 Date: 22.12.2022

Page: 12

Pos. Material number Designation Quantity

7 R902121371 SPACER BUSHING 1 UNIT

7 R902121372 SPACER BUSHING 1 UNIT
7 R902010896 SPACER BUSHING 1 UNIT
7 R902035911 SPACER BUSHING 1 UNIT
7 R902035912 SPACER BUSHING 1 UNIT
7 R902071140 SPACER BUSHING 1 UNIT
8 R902132565 COMPRESSION SPRING 1 UNIT
10 R902035605 SPRING DISK 1 UNIT
11 R902237895 SETSCREW 1 UNIT
13 R909086336 O-RING 1 UNIT D
15 R902283551 RETAINING RING 1 UNIT
18 R909084469 O-RING 1 UNIT D
19 R909152707 SEALING NUT 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner, Dr. Heiner Lang, Reinhard Schäfer, Dr. Marc Wucherer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Christoph Kübel
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902229568 89275 Elchingen

Germany
Drawing: RA82670819
+49 (0)7308/82-2126
Designation: POSITIONING PISTON

Status of version: 11/2022 Date: 22.12.2022

Page: 13

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner, Dr. Heiner Lang, Reinhard Schäfer, Dr. Marc Wucherer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Christoph Kübel
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902005364 89275 Elchingen

Germany
Drawing: R902005268
+49 (0)7308/82-2126
Designation: CONNECTION PLATE

Status of version: 11/2022 Date: 22.12.2022

Page: 14

Pos. Material number Designation Quantity

1 R902000663 PRESSURE RELIEF VALVE 2 UNIT L

2 R902063163 PRESSURE RELIEF VALVE 1 UNIT L
5 R902043273 CONNECTION PLATE 1 UNIT
6 R909432238 BUSHING 1 UNIT
7 R909083067 SOCKET HEAD CAP SCREW 4 UNIT
8 R900748992 STRAIGHT PIN 2 UNIT
11 R909831318 DOUBLE BREAK-OFF PLUG 1 UNIT
12 R909154024 SCREW PLUG 1 UNIT D
22 R909156987 CYL. ROLLER BEARING 1 UNIT
35 R909151692 SCREW PLUG 2 UNIT D
98 R902002444 SEAL KIT 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner, Dr. Heiner Lang, Reinhard Schäfer, Dr. Marc Wucherer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Christoph Kübel
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902005364 89275 Elchingen

Germany
Drawing: R902005268
+49 (0)7308/82-2126
Designation: CONNECTION PLATE

Status of version: 11/2022 Date: 22.12.2022

Page: 15

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner, Dr. Heiner Lang, Reinhard Schäfer, Dr. Marc Wucherer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Christoph Kübel
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902000663 89275 Elchingen

Germany
Drawing:
+49 (0)7308/82-2126
Designation: PRESSURE RELIEF VALVE

Status of version: 11/2022 Date: 22.12.2022

Page: 16

Pos. Material number Designation Quantity

1 R902281037 PRESSURE RELIEF VALVE 1 UNIT L

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner, Dr. Heiner Lang, Reinhard Schäfer, Dr. Marc Wucherer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Christoph Kübel
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902281037 89275 Elchingen

Germany
Drawing: RA66792830
+49 (0)7308/82-2126
Designation: PRESSURE RELIEF VALVE

Status of version: 11/2022 Date: 22.12.2022

Page: 17

Pos. Material number Designation Quantity

1 R902000659 SCREW PLUG 1 UNIT

2 R902000661 VALVE PLATE 1 UNIT
3 R902000660 VALVE STEM 1 UNIT
4 R902000759 EXPANSION PIECE 1 UNIT
5 R902000688 COMPRESSION SPRING 1 UNIT
6 R902254586 COMPRESSION SPRING 1 UNIT
7 R902000658 SETSCREW 1 UNIT
9 R909830863 O-RING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner, Dr. Heiner Lang, Reinhard Schäfer, Dr. Marc Wucherer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Christoph Kübel
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902281037 89275 Elchingen

Germany
Drawing: RA66792830
+49 (0)7308/82-2126
Designation: PRESSURE RELIEF VALVE

Status of version: 11/2022 Date: 22.12.2022

Page: 18

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner, Dr. Heiner Lang, Reinhard Schäfer, Dr. Marc Wucherer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Christoph Kübel
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902063163 89275 Elchingen

Germany
Drawing: R902063161
+49 (0)7308/82-2126
Designation: PRESSURE RELIEF VALVE

Status of version: 11/2022 Date: 22.12.2022

Page: 19

Pos. Material number Designation Quantity

1 R902063160 SCREW PLUG 1 UNIT

2 R909435899 VALVE SPOOL 1 UNIT
3 R902010336 SPRING DISK 1 UNIT
4 R902005891 COMPRESSION SPRING 1 UNIT
5 R902601678 STEEL SEALING RING 1 UNIT
6 R909083761 O-RING 1 UNIT D
7 R909150369 SHIM RING 1 UNIT
7 R909150370 SHIM RING 1 UNIT
7 R909153402 SHIM RING 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner, Dr. Heiner Lang, Reinhard Schäfer, Dr. Marc Wucherer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Christoph Kübel
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902063163 89275 Elchingen

Germany
Drawing: R902063161
+49 (0)7308/82-2126
Designation: PRESSURE RELIEF VALVE

Status of version: 11/2022 Date: 22.12.2022

Page: 20

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner, Dr. Heiner Lang, Reinhard Schäfer, Dr. Marc Wucherer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Christoph Kübel
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902009101 89275 Elchingen

Germany
Drawing: R902008952
+49 (0)7308/82-2126
Designation: INTERNAL GEAR PUMP

Status of version: 11/2022 Date: 22.12.2022

Page: 21

Pos. Material number Designation Quantity

1 R902005363 WHEEL SET 1 UNIT

2 R902049954 INTERMEDIATE FLANGE 1 UNIT
3 R902049801 THROUGH DRIVE SHAFT 1 UNIT
4 R909432238 BUSHING 1 UNIT
5 R902258065 PARALLEL KEY 1 UNIT
9 R913057610 SNAP RING 1 UNIT
10 R909083038 SOCKET HEAD CAP SCREW 4 UNIT
11 R909083790 O-RING 1 UNIT D
13 R913032365 O-RING 1 UNIT
98 R902002447 SEAL KIT 1 UNIT

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner, Dr. Heiner Lang, Reinhard Schäfer, Dr. Marc Wucherer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Christoph Kübel
 Bosch Rexroth AG
Spare parts list Service Hydraulics
Glockeraustrasse 4

Material number: R902009101 89275 Elchingen

Germany
Drawing: R902008952
+49 (0)7308/82-2126
Designation: INTERNAL GEAR PUMP

Status of version: 11/2022 Date: 22.12.2022

Page: 22

L = Assembly group D = Sealing element

Security notice:

Assembly, commissioning and operation, disassembly, service (including maintenance and repair) require basic
mechanical/electrical/hydraulic/pneumatic knowledge, as well as knowledge of the appropriate technical terms. In
order to ensure operating safety, these activities may therefore only be carried out by qualified technical personnel
or an instructed person under the direction and supervision of qualified personnel. Qualified personnel are those
who can recognize possible hazards and institute the appropriate safety measures due to their professional
training, knowledge, and experience, as well as their understanding of the relevant conditions pertaining to the work
to be done. Qualified personnel must observe the rules relevant to the subject area. Also observe the generally
applicable, legal or otherwise binding regulations of the European or national legislation and the rules for the
prevention of accidents and for environmental protection applicable in your country. The data specified above only
serve to describe the product. No statements concerning a certain condition or suitability for a certain application
can be derived from our information. The given information does not release the user from the obligation of own
judgement and verification. It must be remembered that our products are subject to a natural process of wear and
aging.
©This document, as well as the data, specifications and other information set forth in it, are the exclusive property
of Bosch Rexroth AG. Without their consent it may not be reproduced or given to third parties.

Firmensitz / Headquarters: Stuttgart, Registrierung / Registration: Amtsgericht Stuttgart HRB 23192

Vorstand / Executive Board: Rolf Najork (Vorsitzender / President), Dr. Markus Forschner, Dr. Heiner Lang, Reinhard Schäfer, Dr. Marc Wucherer
Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Christoph Kübel