Introducing a revolutionary micro drill,

engineered to redefine precision new

The RT 100 FB solid carbide flat bottom drill is ideally

suited for drilling into oblique or curved surfaces.
RT 100 FB FLAT BOTTOM DRILL
The RT 100 FB solid carbide flat bottom drill is ideally suited for drilling into oblique or
curved surfaces. A finish pass with an end mill is unnecessary because the drill’s 180° point
angle produces holes with a true flat bottom surface. Therefore, subsequent drilling
operations allow for extremely accurate centering with low vibration.

ADVANTAGES
• reduced process costs as spot-facing is omitted
• drilling of oblique or curved surfaces up to 45° without deflection
• exit of the hole is virtually burr-free, thus ideal for cross-drilled holes
• high process reliability due to precise alignment and roundness resulting in
excellent surface quality
• The n7 diameter tolerance can be used to pilot for a subsequent drill of
either the m7 or h7 tolerance class.

APPLICATIONS
oblique entry and exit sheet metal
curved entry and exit half hole
spot-facing offset hole
core drilling flat-bottom hole
pilot drilling cross-drilled hole
 Flat-bottom drills

RT 100 FB Micro drills

Tool material Solid carbide
~3xD RT 100
FB
n7 NEW Coating Ferrox coated
180° Without
Cutting depth Type Point angle Tolerance on Ø Internal coolant
Shank form HA
Material Suitability

P Steel ●
●
Stainless
M steel
K Cast iron ● 180° point geometry for flat bottom of the hole • for piloting,
drilling, or finishing • low burr development • piloting in all
N Aluminum ○ positions and materials
S Ni / Ti
alloys ○
H Hardened
steel ○
●=Optimal ○=Limited
t max = l 2-1.5 x d1

d1
t max
d2
l3 l2
l1

Series 6496
d1 d1 d1 d1 d2 h6 l1 l2 tmax l3 Code
EDP No.
inch fract. in wire/ltr mm mm mm mm mm mm no.
0.0394 1.00 3.00 47.00 4.00 2.50 40.00 1.0000 9064960010000
0.0413 1.05 3.00 47.00 4.20 2.63 39.00 1.0500 9064960010500
0.0433 1.10 3.00 47.00 4.40 2.75 39.00 1.1000 9064960011000
0.0453 1.15 3.00 47.00 4.60 2.88 39.00 1.1500 9064960011500
0.0469 1.19 3.00 47.00 4.80 3.02 39.00 1.1900 9064960011900
0.0472 1.20 3.00 47.00 4.80 3.00 39.00 1.2000 9064960012000
0.0492 1.25 3.00 47.00 5.00 3.13 39.00 1.2500 9064960012500
0.0512 1.30 3.00 47.00 5.20 3.25 39.00 1.3000 9064960013000
0.0531 1.35 3.00 47.00 5.40 3.38 38.00 1.3500 9064960013500
0.0551 #54 1.40 3.00 47.00 5.60 3.50 38.00 1.4000 9064960014000
0.0571 1.45 3.00 47.00 5.80 3.63 38.00 1.4500 9064960014500
0.0591 1.50 3.00 47.00 6.00 3.75 38.00 1.5000 9064960015000
0.0610 1.55 3.00 47.00 6.20 3.88 38.00 1.5500 9064960015500
0.0626 1/16 1.59 3.00 47.00 6.40 4.02 38.00 1.5900 9064960015900
0.0630 1.60 3.00 47.00 6.40 4.00 38.00 1.6000 9064960016000
0.0650 1.65 3.00 47.00 6.60 4.13 37.00 1.6500 9064960016500
0.0669 #51 1.70 3.00 47.00 6.80 4.25 37.00 1.7000 9064960017000
0.0689 1.75 3.00 47.00 7.00 4.38 37.00 1.7500 9064960017500
0.0709 1.80 3.00 47.00 7.20 4.50 37.00 1.8000 9064960018000
0.0728 #49 1.85 3.00 47.00 7.40 4.63 37.00 1.8500 9064960018500
0.0748 1.90 3.00 47.00 7.60 4.75 37.00 1.9000 9064960019000
0.0768 1.95 3.00 47.00 7.80 4.88 36.00 1.9500 9064960019500
0.0780 5/64 1.98 3.00 47.00 8.00 5.03 36.00 1.9800 9064960019800
0.0787 2.00 4.00 50.00 8.00 5.00 38.00 2.0000 9064960020000
0.0807 2.05 4.00 50.00 8.20 5.13 38.00 2.0500 9064960020500
0.0827 2.10 4.00 50.00 8.40 5.25 37.00 2.1000 9064960021000
0.0846 2.15 4.00 50.00 8.60 5.38 37.00 2.1500 9064960021500
0.0866 2.20 4.00 50.00 8.80 5.50 37.00 2.2000 9064960022000
0.0886 2.25 4.00 50.00 9.00 5.63 37.00 2.2500 9064960022500
0.0906 2.30 4.00 50.00 9.20 5.75 37.00 2.3000 9064960023000
0.0913 2.32 4.00 50.00 9.40 5.92 37.00 2.3200 9064960023200
0.0925 2.35 4.00 50.00 9.40 5.88 37.00 2.3500 9064960023500
0.0937 3/32 2.38 4.00 50.00 9.60 6.03 36.00 2.3800 9064960023800
0.0945 2.40 4.00 50.00 9.60 6.00 36.00 2.4000 9064960024000
0.0965 2.45 4.00 50.00 9.80 6.13 36.00 2.4500 9064960024500
0.0984 2.50 4.00 50.00 10.00 6.25 36.00 2.5000 9064960025000

3
 Flat-bottom drills

Series 6496
d1 d1 d1 d1 d2 h6 l1 l2 tmax l3 Code
EDP No.
inch fract. in wire/ltr mm mm mm mm mm mm no.
0.1004 2.55 4.00 50.00 10.20 6.38 36.00 2.5500 9064960025500
0.1024 2.60 4.00 50.00 10.40 6.50 36.00 2.6000 9064960026000
0.1043 2.65 4.00 50.00 10.60 6.63 36.00 2.6500 9064960026500
0.1063 2.70 4.00 50.00 10.80 6.75 36.00 2.7000 9064960027000
0.1083 2.75 4.00 50.00 11.00 6.88 35.00 2.7500 9064960027500
0.1094 7/64 2.78 4.00 50.00 11.20 7.03 35.00 2.7800 9064960027800
0.1102 2.80 4.00 50.00 11.20 7.00 35.00 2.8000 9064960028000
0.1122 2.85 4.00 50.00 11.40 7.13 35.00 2.8500 9064960028500
0.1142 2.90 4.00 50.00 11.60 7.25 35.00 2.9000 9064960029000
0.1161 #32 2.95 4.00 50.00 11.80 7.38 35.00 2.9500 9064960029500
0.1181 3.00 6.00 50.00 12.00 7.50 33.00 3.0000 9064960030000

4
 Flat-bottom drills

RT 100 FB drills
Tool material Solid carbide
3xD RT 100 n7
FB
180°
Coating nano-FIREX
Cutting depth Type Point angle Tolerance on Ø Internal coolant
Shank form HA
Material Suitability

P Steel ●
●
Stainless
M steel
K Cast iron ● 180° point geometry for flat bottom of the hole • for piloting,
drilling, or finishing • low burr development • piloting in all
N Aluminum ○ positions and materials
S Ni / Ti
alloys ○
H Hardened
steel ○
●=Optimal ○=Limited
t max = l 2-1,5 x d1
t max

d2

d1
l3 l2
l1

Series 6596
d1 d1 d1 d1 d2 h6 l1 l2 tmax l3 Code
EDP No.
inch fract. in wire/ltr mm mm mm mm mm mm no.
0.1181 3.00 6.00 61.00 16.00 11.50 40.00 3.000 9065960030000
0.1220 3.10 6.00 61.00 16.00 11.35 40.00 3.100 9065960031000
0.1248 1/8 3.17 6.00 61.00 16.00 11.25 40.00 3.170 9065960031700
0.1260 3.20 6.00 61.00 16.00 11.20 40.00 3.200 9065960032000
0.1280 3.25 6.00 61.00 16.00 11.13 40.00 3.250 9065960032500
0.1299 3.30 6.00 61.00 16.00 11.05 40.00 3.300 9065960033000
0.1339 3.40 6.00 61.00 16.00 10.90 40.00 3.400 9065960034000
0.1378 3.50 6.00 61.00 16.00 10.75 40.00 3.500 9065960035000
0.1406 9/64 #28 3.57 6.00 61.00 16.00 10.65 40.00 3.570 9065960035700
0.1417 3.60 6.00 61.00 16.00 10.60 40.00 3.600 9065960036000
0.1457 3.70 6.00 61.00 16.00 10.45 40.00 3.700 9065960037000
0.1496 #25 3.80 6.00 65.00 18.00 12.30 40.00 3.800 9065960038000
0.1535 3.90 6.00 65.00 18.00 12.15 40.00 3.900 9065960039000
0.1563 5/32 3.97 6.00 65.00 18.00 12.05 40.00 3.970 9065960039700
0.1575 4.00 6.00 65.00 18.00 12.00 36.00 4.000 9065960040000
0.1591 #21 4.04 6.00 65.00 18.00 11.94 40.00 4.040 9065960040400
0.1614 4.10 6.00 65.00 18.00 11.85 36.00 4.100 9065960041000
0.1654 4.20 6.00 65.00 18.00 11.70 40.00 4.200 9065960042000
0.1693 #18 4.30 6.00 65.00 21.00 14.55 40.00 4.300 9065960043000
0.1720 11/64 4.37 6.00 65.00 21.00 14.45 40.00 4.370 9065960043700
0.1732 4.40 6.00 65.00 21.00 14.40 40.00 4.400 9065960044000
0.1772 #16 4.50 6.00 65.00 21.00 14.25 40.00 4.500 9065960045000
0.1811 4.60 6.00 65.00 21.00 14.10 40.00 4.600 9065960046000
0.1831 4.65 6.00 65.00 21.00 14.03 40.00 4.650 9065960046500
0.1850 #13 4.70 6.00 65.00 21.00 13.95 40.00 4.700 9065960047000
0.1874 3/16 4.76 6.00 65.00 26.00 18.86 36.00 4.760 9065960047600
0.1890 #12 4.80 6.00 65.00 26.00 18.80 36.00 4.800 9065960048000
0.1929 4.90 6.00 65.00 26.00 18.65 36.00 4.900 9065960049000
0.1969 5.00 6.00 65.00 26.00 18.50 36.00 5.000 9065960050000
0.2008 5.10 6.00 65.00 26.00 18.35 36.00 5.100 9065960051000
0.2012 #7 5.11 6.00 65.00 26.00 18.34 36.00 5.110 9065960051100
0.2031 13/64 5.16 6.00 65.00 26.00 18.26 36.00 5.160 9065960051600
0.2047 5.20 6.00 65.00 26.00 18.20 36.00 5.200 9065960052000
0.2087 5.30 6.00 65.00 26.00 18.05 36.00 5.300 9065960053000
0.2126 5.40 6.00 65.00 26.00 17.90 36.00 5.400 9065960054000
0.2130 #3 5.41 6.00 65.00 26.00 17.89 36.00 5.410 9065960054100

5
 Flat-bottom drills

Series 6596
d1 d1 d1 d1 d2 h6 l1 l2 tmax l3 Code
EDP No.
inch fract. in wire/ltr mm mm mm mm mm mm no.
0.2165 5.50 6.00 65.00 26.00 17.75 36.00 5.500 9065960055000
0.2185 5.55 6.00 65.00 26.00 17.68 36.00 5.550 9065960055500
0.2189 7/32 5.56 6.00 65.00 26.00 17.66 36.00 5.560 9065960055600
0.2205 5.60 6.00 65.00 26.00 17.60 36.00 5.600 9065960056000
0.2244 5.70 6.00 65.00 26.00 17.45 36.00 5.700 9065960057000
0.2283 5.80 6.00 65.00 26.00 17.30 36.00 5.800 9065960058000
0.2323 5.90 6.00 65.00 26.00 17.15 36.00 5.900 9065960059000
0.2343 15/64 5.95 6.00 65.00 26.00 17.08 36.00 5.950 9065960059500
0.2362 6.00 6.00 65.00 26.00 17.00 36.00 6.000 9065960060000
0.2402 6.10 8.00 78.00 31.00 21.85 36.00 6.100 9065960061000
0.2441 6.20 8.00 78.00 31.00 21.70 36.00 6.200 9065960062000
0.2480 6.30 8.00 78.00 31.00 21.55 36.00 6.300 9065960063000
0.2500 1/4 E 6.35 8.00 78.00 31.00 21.48 36.00 6.350 9065960063500
0.2520 6.40 8.00 78.00 31.00 21.40 36.00 6.400 9065960064000
0.2559 6.50 8.00 78.00 31.00 21.25 36.00 6.500 9065960065000
0.2571 F 6.53 8.00 78.00 31.00 21.21 36.00 6.530 9065960065300
0.2579 6.55 8.00 78.00 31.00 21.18 36.00 6.550 9065960065500
0.2598 6.60 8.00 78.00 31.00 21.10 36.00 6.600 9065960066000
0.2638 6.70 8.00 78.00 31.00 20.95 36.00 6.700 9065960067000
0.2657 17/64 H 6.75 8.00 78.00 31.00 20.88 36.00 6.750 9065960067500
0.2677 6.80 8.00 78.00 31.00 20.80 36.00 6.800 9065960068000
0.2717 I 6.90 8.00 78.00 31.00 20.65 36.00 6.900 9065960069000
0.2756 7.00 8.00 78.00 31.00 20.50 36.00 7.000 9065960070000
0.2795 7.10 8.00 78.00 35.00 24.35 36.00 7.100 9065960071000
0.2811 9/32 K 7.14 8.00 78.00 35.00 24.29 36.00 7.140 9065960071400
0.2835 7.20 8.00 78.00 35.00 24.20 36.00 7.200 9065960072000
0.2874 7.30 8.00 78.00 35.00 24.05 36.00 7.300 9065960073000
0.2913 7.40 8.00 78.00 35.00 23.90 36.00 7.400 9065960074000
0.2953 7.50 8.00 78.00 35.00 23.75 36.00 7.500 9065960075000
0.2969 19/64 7.54 8.00 78.00 35.00 23.69 36.00 7.540 9065960075400
0.2972 7.55 8.00 78.00 35.00 23.68 36.00 7.550 9065960075500
0.2992 7.60 8.00 78.00 35.00 23.60 36.00 7.600 9065960076000
0.3012 7.65 8.00 78.00 35.00 23.53 36.00 7.650 9065960076500
0.3031 7.70 8.00 78.00 35.00 23.45 36.00 7.700 9065960077000
0.3071 7.80 8.00 78.00 35.00 23.30 36.00 7.800 9065960078000
0.3110 7.90 8.00 78.00 35.00 23.15 36.00 7.900 9065960079000
0.3126 5/16 7.94 8.00 78.00 35.00 23.09 36.00 7.940 9065960079400
0.3150 8.00 8.00 78.00 35.00 23.00 36.00 8.000 9065960080000
0.3189 8.10 10.00 87.00 43.00 30.85 40.00 8.100 9065960081000
0.3228 P 8.20 10.00 87.00 43.00 30.70 40.00 8.200 9065960082000
0.3268 8.30 10.00 87.00 43.00 30.55 40.00 8.300 9065960083000
0.3280 21/64 8.33 10.00 87.00 43.00 30.51 40.00 8.330 9065960083300
0.3307 8.40 10.00 87.00 43.00 30.40 40.00 8.400 9065960084000
0.3346 8.50 10.00 87.00 43.00 30.25 40.00 8.500 9065960085000
0.3386 8.60 10.00 87.00 43.00 30.10 40.00 8.600 9065960086000
0.3425 8.70 10.00 87.00 43.00 29.95 40.00 8.700 9065960087000
0.3437 11/32 8.73 10.00 87.00 43.00 29.91 40.00 8.730 9065960087300
0.3465 8.80 10.00 87.00 43.00 29.80 40.00 8.800 9065960088000
0.3504 8.90 10.00 87.00 43.00 29.65 40.00 8.900 9065960089000
0.3543 9.00 10.00 87.00 43.00 29.50 40.00 9.000 9065960090000
0.3583 9.10 10.00 87.00 43.00 29.35 40.00 9.100 9065960091000
0.3594 23/64 9.13 10.00 87.00 43.00 29.31 40.00 9.130 9065960091300
0.3622 9.20 10.00 87.00 43.00 29.20 40.00 9.200 9065960092000
0.3642 9.25 10.00 87.00 43.00 29.13 40.00 9.250 9065960092500
0.3661 9.30 10.00 87.00 43.00 29.05 40.00 9.300 9065960093000
0.3677 U 9.34 10.00 87.00 43.00 28.99 40.00 9.340 9065960093400
0.3701 9.40 10.00 87.00 43.00 28.90 40.00 9.400 9065960094000
0.3740 9.50 10.00 87.00 43.00 28.75 40.00 9.500 9065960095000

6
 Flat-bottom drills

Series 6596
d1 d1 d1 d1 d2 h6 l1 l2 tmax l3 Code
EDP No.
inch fract. in wire/ltr mm mm mm mm mm mm no.
0.3748 3/8 9.52 10.00 87.00 43.00 28.72 40.00 9.520 9065960095200
0.3760 9.55 10.00 87.00 43.00 28.68 40.00 9.550 9065960095500
0.3780 9.60 10.00 87.00 43.00 28.60 40.00 9.600 9065960096000
0.3819 9.70 10.00 87.00 43.00 28.45 40.00 9.700 9065960097000
0.3858 W 9.80 10.00 87.00 43.00 28.30 40.00 9.800 9065960098000
0.3898 9.90 10.00 87.00 43.00 28.15 40.00 9.900 9065960099000
0.3906 25/64 9.92 10.00 87.00 43.00 28.12 40.00 9.920 9065960099200
0.3937 10.00 10.00 87.00 43.00 28.00 40.00 10.000 9065960100000
0.3976 10.10 12.00 100.00 52.00 36.85 45.00 10.100 9065960101000
0.4016 10.20 12.00 100.00 52.00 36.70 45.00 10.200 9065960102000
0.4055 10.30 12.00 100.00 52.00 36.55 45.00 10.300 9065960103000
0.4063 13/32 10.32 12.00 100.00 52.00 36.52 45.00 10.320 9065960103200
0.4094 10.40 12.00 100.00 52.00 36.40 45.00 10.400 9065960104000
0.4134 10.50 12.00 100.00 52.00 36.25 45.00 10.500 9065960105000
0.4173 10.60 12.00 100.00 52.00 36.10 45.00 10.600 9065960106000
0.4213 10.70 12.00 100.00 52.00 35.95 45.00 10.700 9065960107000
0.4220 27/64 10.72 12.00 100.00 52.00 35.92 45.00 10.720 9065960107200
0.4252 10.80 12.00 100.00 52.00 35.80 45.00 10.800 9065960108000
0.4291 10.90 12.00 100.00 52.00 35.65 45.00 10.900 9065960109000
0.4331 11.00 12.00 100.00 52.00 35.50 45.00 11.000 9065960110000
0.4370 11.10 12.00 100.00 52.00 35.35 45.00 11.100 9065960111000
0.4374 7/16 11.11 12.00 100.00 52.00 35.34 45.00 11.110 9065960111100
0.4409 11.20 12.00 100.00 52.00 35.20 45.00 11.200 9065960112000
0.4449 11.30 12.00 100.00 52.00 35.05 45.00 11.300 9065960113000
0.4488 11.40 12.00 100.00 52.00 34.90 45.00 11.400 9065960114000
0.4528 11.50 12.00 100.00 52.00 34.75 45.00 11.500 9065960115000
0.4531 29/64 11.51 12.00 100.00 52.00 34.74 45.00 11.510 9065960115100
0.4547 11.55 12.00 100.00 52.00 34.68 45.00 11.550 9065960115500
0.4567 11.60 12.00 100.00 52.00 34.60 45.00 11.600 9065960116000
0.4606 11.70 12.00 100.00 52.00 34.45 45.00 11.700 9065960117000
0.4646 11.80 12.00 100.00 52.00 34.30 45.00 11.800 9065960118000
0.4685 11.90 12.00 100.00 52.00 34.15 45.00 11.900 9065960119000
0.4689 15/32 11.91 12.00 100.00 52.00 34.14 45.00 11.910 9065960119100
0.4724 12.00 12.00 100.00 52.00 34.00 45.00 12.000 9065960120000
0.4764 12.10 14.00 104.00 57.00 38.85 45.00 12.100 9065960121000
0.4803 12.20 14.00 104.00 57.00 38.70 45.00 12.200 9065960122000
0.4843 31/64 12.30 14.00 104.00 57.00 38.55 45.00 12.300 9065960123000
0.4882 12.40 14.00 104.00 57.00 38.40 45.00 12.400 9065960124000
0.4921 12.50 14.00 104.00 57.00 38.25 45.00 12.500 9065960125000
0.4961 12.60 14.00 104.00 57.00 38.10 45.00 12.600 9065960126000
0.5000 1/2 12.70 14.00 104.00 57.00 37.95 45.00 12.700 9065960127000
0.5039 12.80 14.00 104.00 57.00 37.80 45.00 12.800 9065960128000
0.5079 12.90 14.00 104.00 57.00 37.65 45.00 12.900 9065960129000
0.5118 13.00 14.00 104.00 57.00 37.50 45.00 13.000 9065960130000
0.5157 33/64 13.10 14.00 104.00 57.00 37.35 45.00 13.100 9065960131000
0.5197 13.20 14.00 104.00 57.00 37.20 45.00 13.200 9065960132000
0.5236 13.30 14.00 104.00 57.00 37.05 45.00 13.300 9065960133000
0.5276 13.40 14.00 104.00 57.00 36.90 45.00 13.400 9065960134000
0.5311 17/32 13.49 14.00 104.00 57.00 36.77 45.00 13.490 9065960134900
0.5315 13.50 14.00 104.00 57.00 36.75 45.00 13.500 9065960135000
0.5354 13.60 14.00 104.00 57.00 36.60 45.00 13.600 9065960136000
0.5394 13.70 14.00 104.00 57.00 36.45 45.00 13.700 9065960137000
0.5433 13.80 14.00 104.00 57.00 36.30 45.00 13.800 9065960138000
0.5469 35/64 13.89 14.00 104.00 57.00 36.17 45.00 13.890 9065960138900
0.5472 13.90 14.00 104.00 57.00 36.15 45.00 13.900 9065960139000
0.5512 14.00 14.00 104.00 57.00 36.00 45.00 14.000 9065960140000
0.5551 14.10 16.00 112.00 62.00 40.85 48.00 14.100 9065960141000
0.5591 14.20 16.00 112.00 62.00 40.70 48.00 14.200 9065960142000

7
 Flat-bottom drills

Series 6596
d1 d1 d1 d1 d2 h6 l1 l2 tmax l3 Code
EDP No.
inch fract. in wire/ltr mm mm mm mm mm mm no.
0.5626 9/16 14.29 16.00 112.00 62.00 40.57 48.00 14.290 9065960142900
0.5630 14.30 16.00 112.00 62.00 40.55 48.00 14.300 9065960143000
0.5669 14.40 16.00 112.00 62.00 40.40 48.00 14.400 9065960144000
0.5709 14.50 16.00 112.00 62.00 40.25 48.00 14.500 9065960145000
0.5748 14.60 16.00 112.00 62.00 40.10 48.00 14.600 9065960146000
0.5780 14.68 16.00 112.00 62.00 39.98 48.00 14.680 9065960146800
0.5787 14.70 16.00 112.00 62.00 39.95 48.00 14.700 9065960147000
0.5827 14.80 16.00 112.00 62.00 39.80 48.00 14.800 9065960148000
0.5866 14.90 16.00 112.00 62.00 39.65 48.00 14.900 9065960149000
0.5906 15.00 16.00 112.00 62.00 39.50 48.00 15.000 9065960150000
0.5937 15.08 16.00 112.00 62.00 39.38 48.00 15.080 9065960150800
0.5945 15.10 16.00 112.00 62.00 39.35 48.00 15.100 9065960151000
0.5984 15.20 16.00 112.00 62.00 39.20 48.00 15.200 9065960152000
0.6024 15.30 16.00 112.00 62.00 39.05 48.00 15.300 9065960153000
0.6063 15.40 16.00 112.00 62.00 38.90 48.00 15.400 9065960154000
0.6094 39/64 15.48 16.00 112.00 62.00 38.78 48.00 15.480 9065960154800
0.6102 15.50 16.00 112.00 62.00 38.75 48.00 15.500 9065960155000
0.6122 15.55 16.00 112.00 62.00 38.68 48.00 15.550 9065960155500
0.6142 15.60 16.00 112.00 62.00 38.60 48.00 15.600 9065960156000
0.6181 5/8 15.70 16.00 112.00 62.00 38.45 48.00 15.700 9065960157000
0.6220 15.80 16.00 112.00 62.00 38.30 48.00 15.800 9065960158000
0.6248 15.87 16.00 112.00 62.00 38.20 48.00 15.870 9065960158700
0.6260 15.90 16.00 112.00 62.00 38.15 48.00 15.900 9065960159000
0.6299 16.00 16.00 112.00 62.00 38.00 48.00 16.000 9065960160000
0.6406 16.27 18.00 120.00 70.00 45.60 48.00 16.270 9065960162700
0.6417 16.30 18.00 120.00 70.00 45.55 48.00 16.300 9065960163000
0.6496 16.50 18.00 120.00 70.00 45.25 48.00 16.500 9065960165000
0.6563 16.67 18.00 120.00 70.00 45.00 48.00 16.670 9065960166700
0.6575 16.70 18.00 120.00 70.00 44.95 48.00 16.700 9065960167000
0.6654 16.90 18.00 120.00 70.00 44.65 48.00 16.900 9065960169000
0.6693 17.00 18.00 120.00 70.00 44.50 48.00 17.000 9065960170000
0.6720 17.07 18.00 120.00 70.00 44.40 48.00 17.070 9065960170700
0.6874 17.46 18.00 120.00 70.00 43.81 48.00 17.460 9065960174600
0.6890 17.50 18.00 120.00 70.00 43.75 48.00 17.500 9065960175000
0.6909 17.55 18.00 120.00 70.00 43.68 48.00 17.550 9065960175500
0.6969 17.70 18.00 120.00 70.00 43.45 48.00 17.700 9065960177000
0.7031 17.86 18.00 120.00 70.00 43.21 48.00 17.860 9065960178600
0.7087 18.00 18.00 120.00 70.00 43.00 48.00 18.000 9065960180000
0.7189 23/32 18.26 20.00 128.00 76.00 48.61 50.00 18.260 9065960182600
0.7283 18.50 20.00 128.00 76.00 48.25 50.00 18.500 9065960185000
0.7362 18.70 20.00 128.00 76.00 47.95 50.00 18.700 9065960187000
0.7441 18.90 20.00 128.00 76.00 47.65 50.00 18.900 9065960189000
0.7480 19.00 20.00 128.00 76.00 47.50 50.00 19.000 9065960190000
0.7500 3/4 19.05 20.00 128.00 76.00 47.43 50.00 19.050 9065960190500
0.7579 19.25 20.00 128.00 76.00 47.13 50.00 19.250 9065960192500
0.7598 19.30 20.00 128.00 76.00 47.05 50.00 19.300 9065960193000
0.7657 19.45 20.00 128.00 76.00 46.83 50.00 19.450 9065960194500
0.7677 19.50 20.00 128.00 76.00 46.75 50.00 19.500 9065960195000
0.7697 19.55 20.00 128.00 76.00 46.68 50.00 19.550 9065960195500
0.7756 19.70 20.00 128.00 76.00 46.45 50.00 19.700 9065960197000
0.7795 19.80 20.00 128.00 76.00 46.30 50.00 19.800 9065960198000
0.7811 19.84 20.00 128.00 76.00 46.24 50.00 19.840 9065960198400
0.7874 20.00 20.00 128.00 76.00 46.00 50.00 20.000 9065960200000

8
 Flat-bottom drills

OPERATING PARAMETERS RT 100 FB - 6496

Hardness Feed Rate - IPR
Material group SFM 0.039 in. 0.059 in. 0.079 in. 0.098 in. 0.118 in.
HRC BHN
1 mm 1.5 mm 2 mm 2.5 mm 3 mm
Common structural steels - < 150 215 0.0009 0.0013 0.0017 0.0022 0.0026
< 32 < 301 195 0.0008 0.0012 0.0016 0.0019 0.0023
Free-cutting steels < 25 < 255 215 0.0009 0.0013 0.0017 0.0022 0.0026
< 32 < 301 195 0.0008 0.0012 0.0016 0.0019 0.0023
Unalloyed heat-treatable steels < 20 < 220 215 0.0009 0.0013 0.0017 0.0022 0.0026
< 25 < 255 195 0.0008 0.0012 0.0016 0.0019 0.0023
< 32 < 301 180 0.0007 0.0011 0.0015 0.0018 0.0022
Alloyed heat-treatable steels < 32 < 301 180 0.0007 0.0011 0.0015 0.0018 0.0022
< 43 < 402 165 0.0007 0.0011 0.0015 0.0018 0.0022
Unalloyed case hardened steels < 25 < 255 215 0.0009 0.0013 0.0017 0.0022 0.0026
Alloyed case hardened steels < 32 < 301 180 0.0007 0.0011 0.0015 0.0018 0.0022
< 43 < 402 165 0.0007 0.0011 0.0015 0.0018 0.0022
Nitriding steels < 32 < 301 180 0.0007 0.0011 0.0015 0.0018 0.0022
< 43 < 402 165 0.0007 0.0011 0.0015 0.0018 0.0022
Tool steels < 25 < 255 130 0.0006 0.0009 0.0012 0.0015 0.0018
< 43 < 402 115 0.0005 0.0007 0.0011 0.0013 0.0015
High speed steels < 43 < 402 115 0.0005 0.0007 0.0011 0.0013 0.0015
Spring steels < 38 < 354 130 0.0006 0.0009 0.0012 0.0015 0.0018
Hardened steels < 48 < 460 65 0.7874 0.0002 0.0003 0.0004 0.0005
< 66 - 50 0.5906 0.0001 0.0002 0.0003 0.0004
Stainless steels, sulphured < 28 < 273 65 0.0002 0.0004 0.0005 0.0006 0.0007
austenitic < 36 < 337 80 0.0003 0.0004 0.0006 0.0007 0.0008
martensitic < 46 < 435 100 0.0004 0.0006 0.0008 0.0010 0.0012
Cast iron < 23 < 242 215 0.0008 0.0012 0.0016 0.0020 0.0024
< 38 < 354 180 0.0007 0.0010 0.0013 0.0017 0.0020
Spheroidal graphite iron and < 23 < 242 180 0.0007 0.0010 0.0013 0.0017 0.0020
malleable cast iron < 38 < 354 180 0.0007 0.0010 0.0013 0.0017 0.0020
Chilled cast iron < 38 < 354 165 0.0006 0.0009 0.0013 0.0016 0.0018
New cast materials GGV < 20 < 220 150 1.7717 0.0006 0.0009 0.0012 0.0015
< 32 < 301
New cast materials ADI < 32 < 301 115 1.3780 0.0005 0.0007 0.0009 0.0011
< 43 < 402
Special alloys < 54 < 549 65 0.0003 0.0005 0.0006 0.0008 0.0009
Ti and Ti-alloys < 25 < 255 80 0.0004 0.0006 0.0008 0.0010 0.0012
< 43 < 402 65 0.0003 0.0005 0.0006 0.0008 0.0009
Aluminium and Al-alloys - < 120 330 0.0008 0.0012 0.0016 0.0020 0.0024
Al wrought alloys - < 200 330 0.0008 0.0012 0.0016 0.0020 0.0024
Al cast alloys ≤ 10 % Si - < 180 330 0.0008 0.0012 0.0016 0.0020 0.0024
≤ 24 % Si - < 180 280 0.0007 0.0010 0.0013 0.0017 0.0020
Magnesium alloys - < 120
Copper, low-alloyed - < 150 260 0.0079 0.0118 0.0157 0.0197 0.0236
Brass, short-chipping - < 180 230 0.0007 0.0010 0.0013 0.0017 0.0020
long-chipping - < 180 215 0.0006 0.0009 0.0013 0.0157 0.0019
Bronze, short-chipping - < 180 230 0.0007 0.0010 0.0013 0.0017 0.0020
< 25 < 255 215 0.0006 0.0009 0.0013 0.0157 0.0019
Bronze, long-chipping < 25 < 255 230 0.0007 0.0010 0.0013 0.0017 0.0020
< 32 < 301 215 0.0006 0.0009 0.0013 0.0157 0.0019
Duroplastics
Thermoplastics
Reinforced plastics - Kevlar
Reinforced plastics - GFK / CFK

Application recommendations:
Drilling into, or exiting from, inclined surfaces: Drilling on flat surfaces:
• angle up to 15° = reduce IPR by 25% PLEASE NOTE: When drilling on flat surfaces, spot drilling is
• angle up to 30° = reduce IPR by 50% recommended.
• angle up to max. 45° = reduce IPR by 75% 1. Spot drill with a conventional solid carbide drill or spot drill to the Ø of the
• once the drill diameter is fully engaged, the FB drill or add 0.080” to the Ø to directly apply a chamfer.”
feed rate can be raised to 100%
2. Run your regular drill cycle with the RT 100 FB at full feed rate.

9
 Flat-bottom drills

OPERATING PARAMETERS RT 100 FB - 6596

Hardness Feed Rate - IPR
Material group SFM 1/8 in. 1/4 in. 3/8 in. 1/2 in. 5/8 in. 3/4 in.
HRC BHN
3.17 mm 6.35 mm 9.52 mm 12.70 mm 15.87 mm 19.05 mm
Common structural steels - < 150 360 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
< 32 < 301 280 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
Free-cutting steels < 25 < 255 360 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
< 32 < 301 280 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
Unalloyed heat-treatable steels < 20 < 220 295 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
< 25 < 255 280 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
< 32 < 301 260 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
Alloyed heat-treatable steels < 32 < 301 295 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
< 43 < 402 215 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
Unalloyed case hardened steels < 25 < 255 330 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
Alloyed case hardened steels < 32 < 301 295 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
< 43 < 402 215 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
Nitriding steels < 32 < 301 245 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
< 43 < 402 230 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
Tool steels < 25 < 255 165 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
< 43 < 402 130 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
High speed steels < 43 < 402 130 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
Spring steels < 38 < 354 115 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
Hardened steels < 48 < 460 115 0.0015 0.0020 0.0030 0.0030 0.0040 0.0050
< 66 -
Stainless steels, sulphured < 28 < 273 130 0.0020 0.0030 0.0050 0.0050 0.0065 0.0080
austenitic < 36 < 337 50 0.0020 0.0030 0.0050 0.0050 0.0065 0.0080
martensitic < 46 < 435 115 0.0020 0.0030 0.0050 0.0050 0.0065 0.0080
Cast iron < 23 < 242 525 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
< 38 < 354 395 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
Spheroidal graphite iron and < 23 < 242 395 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
malleable cast iron < 38 < 354 310 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
Chilled cast iron < 38 < 354 80 0.0015 0.0025 0.0040 0.0040 0.0050 0.0065
New cast materials GGV < 20 < 220 330 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
< 32 < 301 295 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
New cast materials ADI < 32 < 301 260 0.0020 0.0030 0.0050 0.0050 0.0065 0.0080
< 43 < 402 230 0.0020 0.0030 0.0050 0.0050 0.0065 0.0080
Special alloys < 54 < 549 65 0.0020 0.0030 0.0050 0.0050 0.0065 0.0080
Ti and Ti-alloys < 25 < 255 50 0.0020 0.0030 0.0050 0.0050 0.0065 0.0080
< 43 < 402 50 0.0020 0.0030 0.0050 0.0050 0.0065 0.0080
Aluminium and Al-alloys - < 120 655 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
Al wrought alloys - < 200 655 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
Al cast alloys ≤ 10 % Si - < 180 560 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
≤ 24 % Si - < 180 460 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
Magnesium alloys - < 120 655 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
Copper, low-alloyed - < 150 260 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
Brass, short-chipping - < 180 690 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
long-chipping - < 180 460 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
Bronze, short-chipping - < 180 260 0.0025 0.0040 0.0065 0.0065 0.0080 0.0100
< 25 < 255 215 0.0020 0.0030 0.0050 0.0050 0.0065 0.0080
Bronze, long-chipping < 25 < 255 195 0.0020 0.0030 0.0050 0.0050 0.0065 0.0080
< 32 < 301 150 0.0020 0.0030 0.0050 0.0050 0.0065 0.0080
Duroplastics
Thermoplastics
Reinforced plastics - Kevlar
Reinforced plastics - GFK / CFK

Application recommendations:
Drilling into, or exiting from, inclined surfaces: Drilling on flat surfaces:
• angle up to 15° = reduce IPR by 25% PLEASE NOTE: When drilling on flat surfaces, spot drilling is
• angle up to 30° = reduce IPR by 50% recommended.
• angle up to max. 45° = reduce IPR by 75% 1. Spot drill with a conventional solid carbide drill or spot drill to the Ø of the
• once the drill diameter is fully engaged, the FB drill or add 0.080” to the Ø to directly apply a chamfer.”
feed rate can be raised to 100%
2. Run your regular drill cycle with the RT 100 FB at full feed rate.

10
RT 100 FB
Flat Bottom Drill
The specialist in drilling inclined, round or curved
surfaces can be used for a wide range of drilling
applications in an array of different materials.
The following points must be observed when drilling with
the RT 100 FB:

Application Recommendations
Drilling into, or exiting from, inclined surfaces:

• angle up to 15° = reduce IPR by 25%

• angle up to 30° = reduce IPR by 50%
• angle up to max. 45° = reduce IPR by 75%
• once the drill diameter is fully engaged, the feed rate can be raised to 100%

Drilling on flat surfaces:

PLEASE NOTE: When drilling on flat surfaces, spot drilling is recommended.

1. Spot drill with a conventional solid carbide drill or spot drill to

the Ø of the FB drill or add 0.080” to the Ø to directly apply a
chamfer.”

2. Run your regular drill cycle with the RT 100 FB at full feed rate.

You can find cutting values online at www.Guhring.com

 g
Millin

g/
millin
g / T hreadtapping
in
Tapp Fluteless
g
Drillin

k ing
tersin
C oun

ing
Rea m

PCD

ices
Se r v

s
ystem
ular s
Mod

ions
ial solut
Sp e c

tems
vin g sy s
Groo

Item no 400001844 05/24

Guhring, Inc. Main Office Michigan Manufacturing and Guhring Corp. (Canada)
1445 Commerce Avenue Reconditioning Facility 20 Steckle Place, Unit #14
Brookfield, WI 53045 24975 Trans-X Road Kitchener, ON N2E 2C3
Tel (262) 784-6730 (800) 776-6170 Novi, MI 48375 Tel (519) 748-9664 (800) 463-5555
Fax (262) 784-9096 Fax (519) 748-2954