Scribd
Upload
3 views1 page

WinCC7.5_BasicOptions.pdf_page_12

The WinCC V7.5 installation notes detail the licensing requirements, emphasizing that licenses must be transferred from storage to a local drive for proper operation. The software is copy-protected, and running it without a valid license will result in demo mode activation, which is limited to one hour. Additionally, only specific licenses can be cumulated, and the installation must comply with Microsoft’s licensing terms.

Uploaded by

Cristi Crse
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
3 views1 page

WinCC7.5_BasicOptions.pdf_page_12

The WinCC V7.5 installation notes detail the licensing requirements, emphasizing that licenses must be transferred from storage to a local drive for proper operation. The software is copy-protected, and running it without a valid license will result in demo mode activation, which is limited to one hour. Additionally, only specific licenses can be cumulated, and the installation must comply with Microsoft’s licensing terms.

Uploaded by

Cristi Crse
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

WinCC V7.

5 Installation / Release Notes


1.1 WinCC Installation Notes

Licenses which are installed for use in WinCC are transferred from the storage medium to a
local drive and are unregistered on the storage medium.

Note
Furthermore, the licensee confirms that the software (SW) contains licensed software by
Microsoft Corporation or its subsidiaries. Thereby, licensee agrees to be bound by the terms
and conditions of the appended license agreement between Microsoft SQL Server and end
user, and to fulfill same.

Notes on license conditions


Please observe the enclosed license conditions, which are also displayed during the
installation. You need V7.5 licenses for WinCC V7.5.
The SIMATIC WinCC software is copy-protected against unlicensed use. You can find
additional information on licenses and license types under "Licensing" in the WinCC
Information System.
Installed licenses are required to enable proper operation of WinCC. If WinCC is installed
without licenses, the program will switch to demo mode at start-up.

Note
It is not allowed to run WinCC in process mode without a valid license.

Cumulating licenses
The cumulation of more than one license per component subject to a license is only possible
for the following licenses or licenses of the following options:
● WinCC Archive licenses
● WinCC/DataMonitor
● WinCC/WebNavigator
● WinCC/WebUX
● WinCC/IndustrialDataBridge
● WinCC/PerformanceMonitor
● SIMATIC Information Server
Other licenses cannot be cumulated.

Demo Mode
If a license is missing for one or several components, WinCC will run in demo mode. WinCC
also switches to demo mode when the maximum authorized number of process tags or archive
tags is exceeded in a project.
In Demo mode, you can use the WinCC software fully for a maximum of one hour. After this
period, the operation of WinCC violates the license agreements.

WinCC Basic Options (WebNavigator, DataMonitor, WebUX)


12 System Manual, 09/2018, A5E45519660-AA

You might also like