0% found this document useful (0 votes)
18 views9 pages

Identifikasi Teknik Instalasi Tenaga Listrik

This document outlines the equipment needs for a vocational school focused on electrical installation and maintenance training. It details various training systems and tools required for practical learning in areas such as AC/DC circuits, PLC applications, electrical maintenance, and motor control. Each item includes specifications, quantity requirements, and descriptions of their intended use in educational settings.

Uploaded by

oky juan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
18 views9 pages

Identifikasi Teknik Instalasi Tenaga Listrik

This document outlines the equipment needs for a vocational school focused on electrical installation and maintenance training. It details various training systems and tools required for practical learning in areas such as AC/DC circuits, PLC applications, electrical maintenance, and motor control. Each item includes specifications, quantity requirements, and descriptions of their intended use in educational settings.

Uploaded by

oky juan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

Form Identifikasi Kebutuhan Sekolah Peralatan Peralatan Praktik Utama Konsentrasi Keahlian Teknik

Instalasi Tenaga Listrik

Nama Sekolah :
Alamat :
Kab/Kota :
Cabang Dinas :

No Nama Alat Rasio Deskripsi Ceklist Kebutuhan ( V )


1 AC DC 1 Set/Ruang Untuk memperkenalka n siswa
Training System Praktik pada prinsip dasar sirkuit listrik,
baik dalam arus searah (dc) dan
arus bolak-balik (ac).
Minimal konfigurasi : DC power
source (protected), AC power
source (protected), A selection of
resistors, An inductor, parallel-
connected to a fl uorescent light,
Two capacitors, Transformer, A
selection of switches: SPDT,
DPDT, NO push button, NC push
button, selector switch, knife,
switch, DC relay, AC relay, A
selection of indicator lights:
green, yellow, red,Solenoid,
2 Aplikasi PLC pada 1 Set/ Ruang Untuk memberikan pemahaman
Mekanikal DC Motor Praktik tentang logika pemrograman
PLC kepada siswa
PLC box, analog inputs and
outputs (0-10 V dc), 24 V dc
built-in power supply, fault
switches, push-buttons, toggle
switches, and 1 unit DC Motor
Electro-Mechanical
3 Basic Electric Training 6 Set/ Ruang Untuk menjelaskan karakteristik
System Praktik rangkaian dasar listrik , Daya
input: AC380V tiga fasa
50Hz/60Hz, Daya keluaran:
AC380V 50Hz/60Hz, AC220V
50Hz/60Hz, Daftar bagian: Meja
kerja, Modul transformator satu
fasa, Sekering, Modul Rheostat,
Modul beban, Modul penyearah,
Modul meter voltase ampere,
Kabel Penghubung.

4 Electrical Installation 6 Set/ Ruang Perangkat untuk merangkai


Training System Praktik instalasi tenaga listrik dan
penerangan.
Konfigurasi minimal: Input
Power: AC 380V / 220V,
50Hz/60Hz
No Nama Alat Rasio Deskripsi Ceklist Kebutuhan ( V )

5 Electrical Know-How 6 Set/ Ruang Untuk pelatihan perakitan dan


Training Equipment Praktik pemeriksaaan instalasi
penerangan listrik tegangan
rendah. Input power : three-
phase, AC
380V±10% 50Hz/60Hz, With
short circuit protection, leakage
protection, overload protection,
etc. Output power : AC 380V
safety guard socket output and
quadrupole standard socket
output, AC 220V three-pole
multi-socket

6 Electrical Maintenanc e 6 Set/ Ruang Untuk perakitan dan


Skill Training Praktik karakteristik rangkaian dasar
Workbench listrik dan pencahayaan umum.
Input power : Three-phase, AC
380V±10% 50Hz/60Hz, Output
power : AC 380V safety terminal
output, output power indicator
AC 220V safety socket output,
rocker switch control.

7 Electricity Fundament al 1 Set/ Ruang Untuk praktik pengenalan dasar


Training System Praktik kelistrikan juga mempelajari
komponen kelistrikan.
Power: 220 V/380 V, -
Workstation, current limiting,
thermal magnetic, switchs,
Indicator Light RGY, Resistors
Set, Capasitors Set, Inductors
Set, Contactor,Button Switch,
Relay,
No Nama Alat Rasio Deskripsi Ceklist Kebutuhan ( V )

8 Frequency Control 6 Set /Ruang Untuk pelatihan sekaligus alat


Speed Regulation Praktik ukur pada pelatihan / percobaan
Experiment System pengaturan kecepatan dari
kinerja sistem kontrol yang
menggunakan variabel
frekuensi.
Compressor: min. 1/4 HP
AC220V. Condenser and
Evaporator: Air-cooled type,
Copper tube with fin, equipped
with fan, Liquid receiver
Accumulator High and Low
Pressure Gauge, High and Low
Pressure Switch,Thermometer,
voltmeter and Ampere meter,
Filter Dryer, Sight glass, Stop
valve, Charging valve.
9 General 6 Set /Ruang Untuk pelatihan/percobaan
Refrigeration Training Praktik identifikasi struktur dasar dan
prinsip kerja pada sistem
pendingin umum. Compressor:
min. 1/4 HP
AC220V. Condenser and
Evaporator: Air-cooled type,
Copper tube with fin, equipped
with fan, Liquid receiver
Accumulator High and Low
Pressure Gauge, High and Low
Pressure Switch,Thermometer,
voltmeter and Ampere meter,
Filter Dryer, Sight glass, Stop
valve, Charging valve.
10 Industrial 1 Set/ Untuk pembelajaran teori serta
Motor and Ruang teknik kendali motor
Transformer Praktik listrik.Konfigurasi minimal :
Training Industrial
System Workstation, Push Buttons,
Selector Switches, Emergency
Button, Pilot Lights, Dual
Contactors, Lockout Module,
Three-Phase Manual Starter,
Contactor, Control Relay,
overload relay, time delay relay,
3
Pole Fuse Holder, Control
Transformer, Cam Switch, Inertia
Wheel, Starting Resistors, Motor
Brake, Soft Starter, AC Power
Supply (double-sided),
Connection Lead and Accessory
Set, Fuses, Power Diodes, AC
motor, AC/DC Drive
No Nama Alat Rasio Deskripsi Ceklist Kebutuhan ( V )

11 Instalasi Tenaga Listrik 1 Set/ Ruang Untuk Industrial wiring training


dengan Panel Praktik system - Enclosures and
conduits, -
Dsitribusi daya listrik, - Electrical
Wiring , Konfigurasi minimal : 1
Set Mobile Workstation with
Three-Phase Power Bus, 1 Set
Enclosures and Conduits

12 Intermediate Electrical 6 Set/ Ruang Untuk pelatihan sekaligus alat


Maintenance Skill Praktik ukur perakitan dan
Training and pemeliharaan rangkaian listrik.
Assessment Input power:AC360V,
50Hz/60Hz, Three-phase AC volt
meter with indicator 450V AC
power : Three phase output, 0~
220V/2A adjustable AC power
output, Transformer AC output:
equipped with emergency stop
button. DC stabilized power
supply : 1.25~30V/2A accuracy
of adjustment 1%

13 Kelistrikan Dasar 1 Set/ Ruang Untuk memahami sistem


Praktik pelatihan fundamental listrik,
Konfigurasi Minimal : Sakelar,
Lampu Indikator, Resistor,
Papan
Sirkuit Cetak, Kapasitor /
Induktor, Kontaktor, Tombol
Tekan, Transformator Kontrol,
Relai, Termostat Bimetalik
Hunian, Pemutus, Pemutus Sw,
Multimeteritch, Clampmeter,
Test
Lead Kit.
14 Low and Middle Voltage 6 Set/ Ruang Untuk pelatihan instalasi tenaga
Simulation Training Praktik listrik dan pengujian proteksi
System listrik pada tegangan rendah dan
menengah.
Input power : AC 220V/380V,
Output power : AC 220V power
safety terminal output, DC 220V
power safety isolation output.
No Nama Alat Rasio Deskripsi Ceklist Kebutuhan ( V )

15 Low-Voltage 2 Set/ Ruang Untuk pelatihan pendistribusian


Power Supply & Praktik tenaga listrik tegangan rendah
DistributionTraining untuk industri. Rated
System insulation voltage : DC
660V, Rated working voltage :
AC
380V, Rated operating voltage of
auxiliary circuit : AC 380V 220V,
Busbar rated current : 100A,
Branch busbar rated current :10-
16A

16 Motor & 6 Set/ Ruang Untuk pembelajaran mengenai


Transformer Praktik motor listrik dan transformator,
Maintenance & Test Input power: AC 220V/380V,
Training System Output power : AC380V, AC220V,
Security : leakage protection
(action current ≤ 30mA),
vercurrent
protection, fuse protection.

17 Motor and Transformer 6 Set/ Ruang Untuk pembelajaran mengenai


Maintenance and Test Praktik motor listrik dan transformator
Training System ,Input power: AC 220V/380V,
Output power : AC380V,
AC220V, Security : leakage
protection (action current ≤
30mA), overcurrent protection,
fuse protection.

18 Power Supply and 2 Set/ Ruang Untuk pelatihan pemasangan


Distribution on Duty Praktik instalasi listrik pada gardu induk
Electrician Assessment serta pendistribusian listrik
Training System tegangan rendah – tinggi. Main
circuit rated voltage: AC 380
V, Auxiliary circuit voltage: AC
220V, Rated frequency: 50 (60)
Hz, Rated insulation voltage:
660V, Rated current: horizontal
bus 100A, Vertical bus (MCC)
100A, Bus: three-phase five-wire
system A, B, C, PE, N

19 Primary Electrical 6 Set/ Ruang Untuk pelatihan perakitan


Lighting Skills Praktik instalasi dan penerangan listrik
Assessment Training tegangan rendah.Working
Device power: three-phase 380V
±10%, 50Hz/60Hz
No Nama Alat Rasio Deskripsi Ceklist Kebutuhan ( V )

20 Programmab le Logic 6 Set/ Ruang Untuk pelatihan penggunaan


Controller Training Set Praktik Programmable Logic Control
(PLC).Input power: 220V/380V,
50Hz/60Hz Part list: Workbench,
Power box, PLC module, Motor
control module, Mail sorting
module, Traffic lights module,
Robot control module, Automatic
feed loading module, Processing
center module, Sky tower light
module, Rolling machine
module,
Intermediate relay module, Self
lock button module, Self-
recovery
button module, Instruction
module, Power adapter module,
Test line, CD, Download line.

21 Proteksi Listrik Trainer 1 Set/ Ruang Pengaman Trainer Listrik.


Praktik Konfigurasi minimum 1 Set
power supply Input voltage: 3
AC/400 V (50 Hz) Output
voltage:
3 AC/400 V,Output current:
max. 6 A, 1 Set instalasi rumah,
Input voltage: 3 AC/400 V (50
Hz), Possibility of simulating 3 ×
4 faults Input/output socket,
standardised untuk koneksi ke
modul lain melalui jumper plug
Output voltage: 3 AC/400 V

22 Residential and Building 1 Set/ Ruang Untuk kontrol gedung.


Inteligent Control Praktik Konfigurasi minimal :Power
System input
220V/380V, With short circuit
and overload protection, With
phase display, USB interface,
Switching output/binary input,
Actuators, Push button sensors,
Include: KNX/EIB system
No Nama Alat Rasio Deskripsi Ceklist Kebutuhan ( V )

23 Residential and Building 1 Set/ Ruang Untuk kontrol gedung.


Intelligent Control Praktik Konfigurasi minimal :Power
Training System input
220V/380V, With short circuit
and overload protection, With
phase display, USB interface,
Switching output/binary input,
Actuators, Push button sensors,
Include: KNX/EIB system

24 Servo Motor Trainer 6 Set/ Ruang Untuk menjelaskan karakteristik


Praktik dan pemasangan motor servo.
AC Power: AC 220 V/380 V, Air
pressure: 0.4 MPa to 0.6 MPa,
Drive Type: AC 220V, servo
motor

25 Step Motor Training Set 9 Set/ Ruang untuk pelatihan pengendalian


Praktik pergerakan pada program
menggunakan motor stepper.
Input voltage: 220V, DC Power :
DC24V, Screw stroke: approx.
300mm

26 Electrical Lighting Skills 6 Set/ Ruang Untuk pelatihan perakitan


Assessment Training Praktik instalasi dan penerangan listrik
Device tegangan rendah. Working
power: three-phase
380V ±10%, 50Hz/60Hz

27 Electrical Maintenance 6 Set/ Ruang Untuk pelatihan sekaligus alat


Skill Training Cabinet Praktik ukur pada pemeliharaan listrik
tiga fasa. Input voltage : three-
phase, 380
V, 50 Hz/60 Hz, Output voltage :
AC 380 V, safety terminal output,
output power indicator, AC 220
V
safety socket output.

28 Multi Function 9 Set/ Ruang Untuk menyediakan


Measuring Instrument Praktik instrumen instrumen alat ukur
System komponen elektrik dan
elektronk. 2 channel DC power
supply:
approx. 2 x 0 - 25V, 1A, Signal
pulse generator: 1CH, 1Hz -
200KHz, Frequency counter
range: 0 -1MHz, Digital
multimeter: DC & AC current, DC
& AC voltage, Resistance, Pulse
generator range: 1Hz,10Hz,
100KHz, Analog meter: voltage &
current measurement
No Nama Alat Rasio Deskripsi Ceklist Kebutuhan ( V )

29 Power Electric and 1 Set/ Ruang Untuk belajar kelistrikan dan


Transformer Praktik tenaga listrik meliputi DC power
circuit, AC single phase, AC 3
phase. 1 unit Capacitive Load,
Nominal
Voltage: 230 V/50 Hz, Maximum
Voltage: 440 V, Capacitance
Value
Accuracy: ± 5%, 1x AC,
Transformer Bank dalam A4
modul termasuk 3 independent
power transformer, Primary
rating: 400 V AC, max. 0.25 A
each transformer,

30 Power Supply & 2 Set/ Ruang Untuk pelatihan pemasangan


Distribution on Duty Praktik instalasi listrik pada gardu induk
Electrician Assessment serta pendistribusian listrik
Training System tegangan rendah – tinggi. Main
circuit rated voltage: AC 380
V, Auxiliary circuit voltage: AC
220V, Rated frequency: 50 (60)
Hz, Rated insulation voltage:
660V, Rated current: horizontal
bus 100A, Vertical bus (MCC)
100A, Bus: three-phase five-wire
system A, B, C, PE, N
No Nama Alat Rasio Deskripsi Ceklist Kebutuhan ( V )

31 Motor 3 Phase dan 1 Set/ Ruang Untuk pembelajaran prinsip


Kontakto Praktik kerja motor listrik 3 phase dan
kendali nya dengan rangkaian
relay dan kontaktor listrik.
Konfigurasi minimum : 1 unit 3
phase power supply, Input
voltage: 3 x 400 V AC (50 Hz),
Output socket location
standardised, Output voltage: 3 x
400 V AC, Current-carrying
capacity: max 16 A, RCCB, type
B, 30 mA, Motor protection
switch, Emergency off switch, all
pole, Key switch, LED phase
indicator, Connecting cable with
CEE plug, 1 set industrial
switching devices, 1 unit Board
with switches, pushbuttons and
indicator lights, 1 unit Three
phase current asynchronous
motor 400/690 V,

Peralatan di atas merupakan kebutuhan sekolah berdasarkan hasil rapat dengan stakeholder sekolah dan telah disetujui dan
disepakati bersama.

Kepala Sekolah Guru Perwakilan

NIP. NIP.

You might also like