Scribd
Upload
4 views

Tutorial 1

The document is a tutorial for EEB 411 dated August 21, 2019, containing several questions related to circuit analysis. It includes tasks such as determining output voltages, calculating differential and common-mode gains, and finding resistor values to minimize output offset voltage. Additionally, it addresses the open-loop gain of an op amp at various frequencies.

Uploaded by

tinashefx16
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4 views

Tutorial 1

The document is a tutorial for EEB 411 dated August 21, 2019, containing several questions related to circuit analysis. It includes tasks such as determining output voltages, calculating differential and common-mode gains, and finding resistor values to minimize output offset voltage. Additionally, it addresses the open-loop gain of an op amp at various frequencies.

Uploaded by

tinashefx16
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Tutorial 1

EEB 411

August 21, 2019

Question 1
Determine the output voltage for the circuit shown below:

Question 2

(a) Find the output voltage of the circuit shown above.


(b) Calculate the differential gain Ad of the circuit.
(c) Calculate the common-mode gain Acm of the circuit.
(d) Calculate the Common Mode Rejection Ration (CMRR) in dB of the circuit.

1
Question 3
Determine the output voltage for the circuit shown below:

Question 4

Consider an inverting amplifier circuit designed using an amplifier and two resistors, R1 = 10kΩ
and R2 = 1M Ω. If the op amp is specified to have an input bias current of 100 nA and an input
offset current of 10 nA,
(a) Find the resulting output dc offset voltage.
(b) Calculate the value of a resistor R3 to be placed in series with the positive input lead in order
to minimize the output offset voltage.
(c) What is the new value of VO after introducing R3 ?

Question 5
An internally compensated op amp is specified to have an open-loop dc gain of 106 dB and a unity
gain bandwidth of 3 MHz. Find fb and the open-loop gain (in dB) at fb , 300 Hz, 12 kHz, and 60
kHz.

You might also like