Time To Build Better

Super Flexible

Deformable cementitious, polymer fibre modified adhesive with improved characteristic, slip
resistance and extended open time. High performance adhesive for installing vitrified tiles,
large scale tiles, thin tiles and slabs as well as natural stones.

CHARACTERISTICS
- On water proof and moisture proof _
> 1.0 / _
> 1.5 N/mm2
- C2 TE S1 compliant with EN 12004 standard
- Type 4 T S1 as per IS 15477:2019 layers
- With visible fibres for strength and flexibility - For difficult substrate like heated
balancing substrate deformations on critical floors and dry walls
- No vertical slip C2 / Type 4
surfaces like balconies, terraces, wet rooms,
HIGH STRENGTH
bathrooms, swimming pool and external - For inside and outside use
facade etc - Longer open time for safer
- For ceramic, vitrified tiles (semi and fully), application and adjustable 0.5 mm
glass mosaic and natural stone (non-sensitive) - Easy and excellent workability thanks
- Suitable for large scale and heavy duty to plastified consistency
vitrified tiles - Application Up to 15mm
- Suitable for natural stones on internal as well - Suitable for cement fibre board, gysum T
as external application board (Internal application) NON SLIP
- Suitable for vertical external stone/tile cladding - Installation of floors subjected to heavy
traffic
30 min

Natural Heated Balconies Wall And Large Tiles Humid Indoor & Tile On Low Difficult E
Stone Floors & Patios Floor & Water Outdoor Tile Dust Substrate EXTENDED
Areas Use OPEN TIME

SCOPE OF USE > 2.5 mm

- VURA FasTone S1 is used to laying vitrified tiles (semi and fully), cement and stone tiles,
large format and heavy duty tiles, thin tiles, glass mosaics and natural stone on
deformable substrate. S1
- Its features keep elastic connection with substrate which allowed to carry over shear FLEXIBILITY
stresses between tile and substrate.
- VURA FasTone S1 is recommended to fixing tiles/stones on wall, heated floors, dry wall
boards, facades, terraces, balconies, swimming pools and technological water tanks Compliance With
(no chemicals). IS 15477
- Thanks to advanced adhesion, it is recommended for tiles with absorption < 0.5% as 13007

fully vitrified tiles even to big size tiles (up to 1m2) and for fixing tiles/stones on critical
TDS/C/VURA FasTone S1/MAR 2025_V002_Page 1

Vura Bau-Chemie LLP

substrates such as existing tiles, gypsum substrates, dry wall boards, anhydrates and 1302, 13th Floor,
cellular concrete. Elite Business Hub, Sola,
Ahmedabad 380060,
- Indoors and Outdoors Gujarat, India.
www.vura.ae
- It is recommended for floors with elevated functional loads, in shopping malls,
staircase +91 79 4849 2890
[email protected]
- On horizontal and vertical surfaces
- On Cement and cement-lime plaster, cement screeds, cement ground coats and
concrete etc.
 Time To Build Better

SUBSTRATE PREPARATION
Adhesive can be applied on even and compact substrates, free of any substances that reduce
adherence (grease, bitumen, oil, paint, dust etc.). Concrete should be at least 1 month old.
Cement screeds and plasters should be fully cured. Anhydrite (residual moisture below 0.5%),
gypsum (residual moisture below 1%) substrates should be mechanically roughened and
cleaned from dust. Dry wall Aerated concrete should be free from dust. Can be applied on
existing tiles and should be roughened and cleaned before application. Substrates must not be
wet. Any existing dirt, loose layers and paint coating shall be mechanically removed. Absorbent
substrates shall be dampen and remove excess water before application.

APPLICATION
_
> 1.0 / _
> 1.5 N/mm2
Pour VURA FasTone S1 into a container with the precisely measured amount of clean water and
stir with a drill and mixer until a homogeneous mass without lumps is obtained. Leave for 5 min.
and then stir the mixture again. Apply the mortar with a suitable notched trowel. Use the proper
sized notch trowel to ensure full bedding in the tile. The depth of trowel's notching is depends on C2 / Type 4
the size of tile / stone. The back buttering method shall be used for larger tiles / stones and for HIGH STRENGTH
outdoor applications (ie. additionally a thin layer of the mortar should be spread on the
tile/stone's back side, contact area > 90%). Place the tiles/stones only during the open time of the
0.5 mm
adhesive. Lay the mortar and press while the mortar is still sticky. Fresh excess mortar can be
removed with water, hardened material can only be removed mechanically. Grouting can be
performed no earlier than after 24 hours using VURA tile grouts. Floors are set to light traffic after
approx. 24 hrs. Expansion joints, joints at the corners of walls and floor and around sanitary T
equipment shall be filled with sealants or shall be treated with appropriate treatment. NON SLIP

30 min
PLEASE NOTE
- Applications should be carried out in dry conditions. All data refers to +230 C and R.H. 50%. In
different conditions it should be taken under consideration faster or slower material drying.
E
- Spread not more than the areas which can be layed within the open time of the adhesive.
EXTENDED
- For grouting, It is recommended to use VURA tile grouts. VURA SiGro, VURA Oxi, VURA Oxi 3K OPEN TIME
grouts should be used for grouting indoors and outdoors, also on terraces and balconies. In the
case of substrates exposed to increased chemical and mechanical aggression, use VURA SiGro
cement grout or better VURA Oxi/VURA Oxi 3K epoxy grouts. > 2.5 mm

- For waterproofing, it is essential to waterproof wet areas with VURA waterproofing products
prior to application.
- For Absorbent natural stones, It is recommended to use VURA FiSeal five side sealer
S1
- In the case of laying stone / tiles prone to color changes, sample tests must be necessarily be
FLEXIBILITY
carried out in order to check whether the mortar causes no fading / discoloration of the
tiles/stones.
- Ensure to keep tile joints (gap) is kept between subsequent tiles to accommodate thermal
Compliance With
expansion and contraction.
IS 15477
- Hardening can be accelerated or delayed and that the product itself is subject to local
13007
conditions.
TDS/C/VURA FasTone S1/MAR 2025_V002_Page 2

Vura Bau-Chemie LLP

1302, 13th Floor,
Elite Business Hub, Sola,
Ahmedabad 380060,
PRODUCT SAFETY Gujarat, India.
www.vura.ae
Product contains cement, strongly alkaline reaction with moisture, so protect skin and eyes.
After contact wash immediately with plenty of water. After eye contact also seek medical advice. +91 79 4849 2890
[email protected]
It is recommended to use protective gloves and goggles. For further and complete information
about the safe use of our product, please refer to the latest version of our Material Safety Data
Sheet.
 Time To Build Better

GENERAL DATA
1. Color : Grey and White
2. Pack size : 20 Kg bag
40 Kg bag (For project sale only)
3. Base : Mixture of cements with mineral filers and modifiers

TECHNICAL DATA
1. Bulk Density : Grey : 1.38 g/cc
: White : 1.34 g/cc
2. Mixing Proportion : 4.6 - 4.8 L of water (23% - 24% by weight) for
20 Kg Grey/White bag
: 9.2 - 9.6 L of water (23% - 24% by weight) for
40 Kg Grey/White bag
3. Pot Life : 4 hrs.
4. Achieved Thickness : Up to 15mm
5. Application Temperature : From +5°C to +35°C
6. Grouting : After approx. 24 hrs _
> 1.0 / _
> 1.5 N/mm2
7. According to EN12004:2017 Standard @23±2°C
Test Conditions Requirements Grey/White Value In Range
Tensile Strength (N/mm2)
• Initial (Dry Condition) > 1.00 N/mm2 1.50-1.80 N/mm2
• After Water Immersion > 1.00 N/mm2 1.10-1.40 N/mm2 C2 / Type 4
• After Heat Ageing > 1.00 N/mm2 1.50-1.80 N/mm2 HIGH STRENGTH
• After Freeze/Thaw cycles > 1.00 N/mm2 1.20-1.50 N/mm2
Open Time (E) @30 minutes > 0.5 N/mm2 0.60-0.70 N/mm2
Slip (T) < 0.5 mm 0.20-0.40 mm
Transverse Deformation (mm) S1: > 2.5 and <5mm 3.50-4.50 mm 0.5 mm
8. According to IS15477:2019 Standard @27±2°C
Test Conditions Requirements Grey/White Value In Range
Tensile Strength (N/mm2)
a) Dry Condition > 1.50 N/mm2 1.50-1.80 N/mm2
b) Wet Condition
Shear Adhesion (N/mm2)
> 1.00 N/mm2 1.10-1.40 N/mm2 T
a) Dry Condition > 1.50 N/mm2 1.55-1.75 N/mm2 NON SLIP
b) Wet Condition > 1.00 N/mm2 1.10-1.40 N/mm2
c) Heat Ageing > 1.00 N/mm2 1.50-1.80 N/mm2
Open time (Minutes) Not Specified 30 mins 30 min
Adjustability (Minutes) Not Specified 35 mins
Slip (T) < 0.5 mm 0.20-0.40 mm
Deformability (mm) S1: > 2.5 and <5mm 3.50-4.50 mm
9. Temperature resistance : From -30°C to +75°C
10. Coverage : Consumption may vary depending on the
evenness on the substrate, trowel notch size, E
type of tiles / stone and the application technique. EXTENDED
11. Approximate consumption : As a guide : 1.2 Kg / m2 / mm of thickness OPEN TIME
12. Set to light foot traffic : 24 hrs.
13. Ready for use : 14 days
14. Shelf life : Until 15 months since the date of production when
stored in undamaged dry conditions and original > 2.5 mm
packaging.
The product is compliant with the Type 4 T S1 as per IS 15477:2019 & C 2 T E S1 as per EN 12004 standard.

OTHER INFORMATION S1
Should you need support or advice, please consult our advisory service for architects and FLEXIBILITY
craftsman on the contact information you will find on the local VURA website.

Apart from the information given here it is also important to observe the relevant guidelines, regulations and common
Compliance With
standards of various organizations and trade associations. The afore mentioned characteristics are based on practical
experience and applied testing. Confirmed properties and possible uses which go beyond those listed in this information IS 15477
sheet require our written confirmation. All data given was obtained at an ambient and material temperature of +23° C and 13007
50 % relative air humidity unless specified otherwise. Please note that under other climatic conditions, hardening can be
TDS/C/VURA FasTone S1/MAR 2025_V002_Page 3

accelerated or delayed and that the product itself is subject to local conditions. Vura Bau-Chemie LLP
1302, 13th Floor,
The information contained herein, particularly recommendations for the handling and use of our products, is based on our Elite Business Hub, Sola,
professional experience. As materials and conditions may vary with each intended application, and thus are beyond our Ahmedabad 380060,
sphere of influence, we strongly recommend that in each case sufficient tests are conducted to check the suitability of our Gujarat, India.
products for their intended use. Legal liability cannot be accepted on the basis of the contents of this data sheet or any www.vura.ae
verbal advice given, unless there is a case of willful misconduct or gross negligence on our part or unless there is a case of
+91 79 4849 2890
personal injury or death or a case of liability under the Product Liability Act.
[email protected]
This technical data sheet supersedes all previous editions relevant to this product. Please be aware that this Technical Data
Sheet only relates to a product manufactured in the specific relevant production site.