ARCH DWG
ARCH DWG
15,240
IN
1. All dimensions to be checked on site, written dimensions
Conc. to fdn. (mix B OUT
100mm dia. to be followed in preference to scaled dimensions.
1:3:6) to be at inlet / outlet L
D
thickness specified
B
cast iron pipe 2. All walls less than 200mm thick to be reinforced with
650 hoop iron at every alternate course.
A C
880
SECTION A - A 100mm thick R.C cover
3. All reinforced concrete work is to be in accordance with
PLAN (Scale 1:75)
(Scale 1:75) slab. structural engineer's details.
PLAN AT TOP (Scale 1:75) 4. All sanitary work to be in accordance with M.O.H rules
690 and regulations.
5. Where drain passes under building or driveway area,
pipe to be of cast iron or encased in 150mm concrete.
Selected filling well
6. All waste pipes and soil pipes are to be in ducts and the
compacted and bends to have all cleaning eyes accessible from outside.
consolidated. 600 x 450 mm cast iron
cover
Selected filling in six layers well 7. All windows and external glazed doors on ground floor to
rammed and consolidated into
place. have burglar proofing to Architect's detail.
9. Stair case and lobby doors to be self closing and 1/2
Second hand G.C.I
sheet or roofing hour fire resistant.
Inlet pipe felt
10. All internal plaster to be two coats steel float finished.
MH MH Benching rendered 12mm 11. All manholes within building area, driveway and
Selected stone thick, finished smooth with 100mm dia
profile. steel float agricultural pipes parking to have heavy duty air tight covers and double
laid with open SELECTED STONE 150 DOWN sealed.
joints, minimum TO 20mm
SECTION C - C (Scale 1:50) fall 1:10. 12. Provide G.I. 125 x 100 rainwater down pipes and
125 x 100 G.I.box gutter with brackets etc. where shown.
GROUND
LEVEL 13. All painting to be 3 coats.
LONGITUDINAL SECTION THROUGH 14. Lay 1 layer of paving slabs 600 x 600 on sand along the
PERCOLATION TRENCH perimeter of building.
SECTION THROUGH SOAK PIT
Invert 15. Samples of fittings, materials etc. to be produced &
Selected 600 x 450 mm 100mm th. reinforced
level
stone concrete cover slab 600 x 450 mm approved before commencing work.
cast iron
(mix. 1:2:4) cast iron cover
cover GROUND 16. All office windows to have P.C. cills, built in P.V.
30,480
30,480
LEVEL
Pelmet boxes & timber internal window cills & Skirtings.
100mm dia half round 17. Steel trusses/portal frames & purlins to be painted with
SECTION-DRAIN PIPE TRENCH Benching
No. OF CAPACITY IN PERCOLATION.
channel L B D LITRES 2 coats of oil paint.
(Scale 1:50) USERS TRENCHES
SOAK PLOT
PIT
Client:
3,550
Signature:
Telephone:
Notes:-
150
150
+3,600
2,004
250
50 500 50
200 1 Story 1. All dimensions to be checked on site, written dimensions
to be followed in preference to scaled dimensions.
SHOP 11 SHOP 12
3,500
3,500
Ceramic tile f.f Ceramic tile f.f 2. All walls less than 200mm thick to be reinforced with
hoop iron at every alternate course.
3. All reinforced concrete work is to be in accordance with
200 250
structural engineer's details.
2,700
400 300
150
1,700
4. All sanitary work to be in accordance with M.O.H rules
150
D1 D1
100
and regulations.
1,100
D4
W4
SHOP 10 GENTS 5. Where drain passes under building or driveway area,
±0
2,200
50
D2
100
pipe to be of cast iron or encased in 150mm concrete.
0 Ground Floor
6. All waste pipes and soil pipes are to be in ducts and the
1,000
W4
300
200
D3
100
100
D4
E-04 7. All windows and external glazed doors on ground floor to
150
1,600
150
LADIES
1,050
ELEVATION E-02
have burglar proofing to Architect's detail.
W4
1,200
2,900
SHOP 9 9. Stair case and lobby doors to be self closing and 1/2
100
2,300
D3
D2
1,200
10. All internal plaster to be two coats steel float finished.
50
11. All manholes within building area, driveway and
150
150
200
150
150
parking to have heavy duty air tight covers and double
sealed.
12. Provide G.I. 125 x 100 rainwater down pipes and
SHOP 8 SHOP 4
2,950
2,950
3,000
3,000
125 x 100 G.I.box gutter with brackets etc. where shown.
D1
D1
Ceramic tile f.f Ceramic tile f.f
13. All painting to be 3 coats.
14. Lay 1 layer of paving slabs 600 x 600 on sand along the
+3,600 perimeter of building.
1 Story 15. Samples of fittings, materials etc. to be produced &
150
200
200
150
approved before commencing work.
16. All office windows to have P.C. cills, built in P.V.
26,000
26,000
E-03
SHOP 7 SHOP 3 Pelmet boxes & timber internal window cills & Skirtings.
3,000
3,000
3,000
3,000
D1
D1
2,400
18. Fire fighting equipment to be provided and installed by
Building Fire Consultants.
150
150
200
200
19. The ARCHITECT shall not accept any LIABILITY for works
250
±0
which he has not been expressly instructed in WRITING
0 Ground Floor [&has accepted to proceed in writing ] to SUPERVISE,or for
SHOP 6 SHOP 2
3,000
3,000
3,000
3,000
D1
150
400
200
200
3,000
D1
D1
50 Architect.
50
SHOP 5 -0.20 SHOP 1 ROOF CONSTRUCTION DETAILS
Ceramic tile f.f Ceramic tile f.f
Roof pitch angle 10° +3,600
6,500
6,500
700
200
1 Story
500 25
50mm x 100mm purlins 1200mm C/C on
-0.050 ±0.000
100mm x 50mm rafters max. 2000mm C/C on
100mm x 50mm struts & ties on
68
No. Revision/Issue Date
50
150mm x 75mm tie beam on
D1
D1
Client:
4,500
2,750
225mm x 25mm fascia and
400
150
150
barge boards
Signature:
D1 D1
Telephone:
1,150
1,150
±0
0 Ground Floor
50
400
300
400
150
150
150
400
Concrete Lintel 50X50 ceiling joists
at 600mm C/C
150 3,500 150 1,500 150 3,000
13,900
150 1,500 150 3,500 150 1:2:4 mix
Architect's Stamp and Signature
ELEVATION E-01
E-01 SCALE 1:75
GROUND FLOOR PLAN
3,350
Quantity 14 2 2 2 3
Project Name and Address:
W x H Size 2,500×2,400 2,000×2,400 800×2,400 800×2,100 600×600
Sill height 0 0 0 0 1,900 PROPOSED COMMERCIAL DEVELOPMENT
Head height 2,400 2,400 2,400 2,100 2,500
IN BUWANUKA - KAKIRI DISTRICT
2D Symbol 2,730 2,230 600
800 800
2,710
600
3D Back View - 30mm thick sand blinding on - well compacted earth SECTION, DOOR & WINDOW SCHEDULE
600
- 250mm thick hardcore on Scale Date Drawn
ELEVATION E-04
- well compacted earth
AA
800
AS SHOWN 11-05-25
2,730 2,230
SECTION S - 01
SCALE 1:50 SCALE 1:75