Scribd
Upload
11 views9 pages

Software engineering ATTACHMENT LOG BOOK

The document is an industrial attachment logbook for students at Kirinyaga University, detailing personal information, organization details, and supervisor information. It provides guidelines for recording daily and weekly reports of tasks and skills learned during the attachment, as well as requirements for report submission and change of attachment procedures. The logbook also outlines expected learning outcomes and areas of specialization for various computing and engineering programs.

Uploaded by

samueljesse1909
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
11 views9 pages

Software engineering ATTACHMENT LOG BOOK

The document is an industrial attachment logbook for students at Kirinyaga University, detailing personal information, organization details, and supervisor information. It provides guidelines for recording daily and weekly reports of tasks and skills learned during the attachment, as well as requirements for report submission and change of attachment procedures. The logbook also outlines expected learning outcomes and areas of specialization for various computing and engineering programs.

Uploaded by

samueljesse1909
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 9

INDUSTRIAL ATTACHMENT LOG

BOOK

COMPUTING/ SOFTWARE ENGINEERING/COMPUTER SYSTEM


ENGINEERING

KyU is ISO 9001:2015 certified Page 1 of 9


KyU/F/AA/16

KIRINYAGA UNIVERSITY

ATTACHMENT PERSONAL DETAILS:

A. Personal Details
Last Name ………………………………………………………………………………………….
Other Names ………………………………………… Female Male
Identity Card No……………………. Date of birth: Date ……….. Month ……… year ……
Course …………………………. Section ……………….. …………..Year…………………….
E-mail: ……………………………………………………………………………………………..
Religion……………………………………………………………………………………………..
Home Address ………………………………………Telephone: ……..………………………….
Next of Kin (Name) ……………………………. Relationship……………………………………
Postal Address: ……………… Postal Code …………………… Tel. No. ………………………
Students signature …………………………………… Date …………………………………..

B. Details of Attaching Organization


Name of Organization ………………………………………………………………………….
Postal Address: ……………………………………………… Postal Code …………………
Tel. No:..…………………………………………….. Email ………………………………….

C. Industrial Attachment Supervisor/Trainer


Name …………………………………………………………………………………………
Position/Designation …………………………………………………………………………

Supervisor’s signature……………………………Date …………………………………..

KyU is ISO 9001:2015 certified Page 2 of 9


KyU/F/AA/17

KIRINYAGA UNIVERSITY

THE LOG BOOK


1.0 INTRODUCTION

This logbook is meant to assist students keep detailed description of the tasks done, and new
skills learnt over the course of attachment period. It is also meant to enable industry- based and
university supervisors to keep track of the students’ progresses, assess their work, and offer
guidance where necessary. It should be neatly bound.

1.1 DAILY REPORT

The daily work carried out during the periods of training is to be recorded clearly with sketches
and diagrams where applicable.

1.2 WEEKLY REPORT

This is a summary of the work done in a week and should cover theory/practical report on the
work covered. Students are required to present the log book weekly to the industry- based
supervisor for assessment of content and progress. The supervisor can use any page for his or her
comments where necessary.

1.3 CHANGE OF ATTACHMENT

A student is expected to start and finish his/her industrial attachment in one establishment. If it
becomes absolutely necessary that he/she must change to a different company, the student should
secure permission by writing to the university his/her application for a change of place of
attachment and should indicate the name and address of company he/she wants to change to.

1.4 UNIVERSITY SUPERVISOR’S VISIT

The University supervisor will check student’s log book when he/she visits the students on
attachment to ensure that proper training is being received, and record his/her comments on the
space provided at the end of log book. During this time, the University supervisor can cancel the
attachment and advise the student to look for attachment elsewhere if he/she feels that proper
training is not being offered.

1.5 REPORT WRITING

KyU is ISO 9001:2015 certified Page 3 of 9


In addition to the daily and weekly record, the student should submit a summary report of the
work done during the attachment duration e.g. full coverage of the course, problems
encountered, suggested improvements to make the programme worthwhile. The report should
contain a summary of the activities the student was involved in, challenges met and new skills
learnt.

1.6 REPORT SUBMISSION

The log book must be submitted to the Department/Centre attachment coordinator at the end of
the attachment together with the report both clean and neatly bound.

For proper coordination of this exercise, the attachees will be required to in details direct the
University supervisor of the location of the attaching organization. Use a sketch map where
applicable. Send us a COPY of the “Attachment Personal Details Form KyUC/F/AA/18” and
a Route Map (Google Map)” on or before 19th October, 2021 addressed as follows:

CoD School of Computing and Information Technology

ATT: Attachment Coordinator

Email: [email protected]

F/AA/18
KyU is ISO 9001:2015 certified Page 4 of 9
EXTERNAL ATTACHMENT REQUIREMENTS
FOR;

1 BACHELOR OF SCIENCE IN COMPUTER SCIENCE

2 BACHELOR OF SCIENCE IN INFORMATION TECHNOLOGY

3 BACHELOR OF SCIENCE IN SOFTWARE ENGINEERING

4 BACHELOR OF SCIENCE IN COMPUTER SYSTEM ENGINEERING

5 BACHELOR OF BUSINESS INFORMATION TECHNOLOGY

Industrial Attachment Learning Outcomes

By the end of the attachment period, an attachee should be able to

a) Assemble and install system and application softwares in a computer

b) Design, implement and monitor a computer network

c) Analyze real world problems and provide solutions inform of computer


softwares

d) Improve/ develop new computer hardware

AREAS OF SPECIALIZATION

An attachee must participate in atleast any of the two areas.

S.NO Main Objective TOPIC ACTIVITIES


COMPUTER SUPPORT MODULE
1 Computer Support Hardware Assembling, installation,
and Maintenance components, testing and fault
Microprocessors, diagnosis
Motherboards,
computer
memory, ports
and cables, fault
diagnosis
NETWORKING MODULE
To have a Overview of LAN, Structure of network:
2 general MAN,WAN Topology used,
overview of arrangement of network
Organizations devices and their
network functions, network
cabling used
KyU is ISO 9001:2015 certified Page 5 of 9
To understand Network Hardware Switch, wireless Routers,
various Components Hub, CAT 6 cable, RJ 45
hardware phase plates, phase
components modules, patch panels,
commonly used data points, 9U cabinets,
in networking. tranking etc.
To understand Network Hardware Crimping tool, Cable
tools commonly Tools Tester, cable Striper etc.
used in
networking.

To understand Wireless Network Mounting a wireless and


tools and configuring a WIFI
technologies
used in setting a
wireless network
To design a Development and Attachee to designing
network system simulation of client/server network
and to learn the logical network using simulation
factors simulation tool of choice
considered when
designing
network
systems.
To perform Network Cabling Termination of network
termination of cables: Crossover cable,
cables (RJ 45 Testing of Network Straight through cable
connectors, UTP Cables Testing of network
cables) by cables
following the EIT
568A or 568B
standards.

To connect
switch and patch
panels.
To be able to set Setting up a Seting up of peer to
up a physical physical peer to peer or client/server
computer peer or network through the
network client/server guidance of
network and organizational supervisor
installing a
network printer.
To be able to Installation and installation of user/group
perform configuration of a accounts

KyU is ISO 9001:2015 certified Page 6 of 9


effective network server. Setting client services
installation and Use of Network
configuration of Software Tools;
a network server Ipconfig, ping,
tracert etc.
To learn the Securing a Network configuration –
importance of computer network seting of network
securing, and security parameters (e.g.
troubleshooting centralized
network. authentication)

To share Sharing of network


resources such resources
as folders, (Installation and Sharing of resources
printers troubleshooting of such as databases,
a network printer, applications, folders and
file and folder files
sharing)
To use various Network Useage of network
tools to Troubleshooting troubleshooting tools
troubleshoot, (Software tools/Hardware
and monitor tools) to diagonize and
performance of troubleshoot a network
networks.
To monitor and Network Usage of the required
manage a performance and network monitoring and
LAN/MAN/WAN Management management tools
SOFTWARE DEVELOPMENT MODULE
3 To Describe the Software Design, Participate in any
software software development
Development,
project in the
development life Implementation organization.
cycle Document key
and Maintenance
milestones in the
Develop a software development process
system

Demonstrate the
software system
implementation

KyU is ISO 9001:2015 certified Page 7 of 9


KIRINYAGA UNIVERSITY

WEEK 1 PROGRESS CHART (WEEK ENDING DATE: ……………………)

DAY DESCRIPTION OF WORK DONE AND NEW SKILLS LEARNT

MONDAY

TUESDAY

WEDNESDAY

THURSDAY

FRIDAY

SATURDAY

SUNDAY

KyU/F/AA/19

KyU is ISO 9001:2015 certified Page 8 of 9


KyU

TRAINEE’S WEEKLY REPORT

………………………………………………………………………………………………………
………………………………………………………………………………………………………
………………………………………………………………………………………………………
………………………………………………………………………………………………………
………………………………………………………………………………………………………
………………………………………………………………………………………………………
………………………………………………………………………………………………………
………………………………………………………………………………………………………
………………………………………………………………………………………………………
………………………………………………………………………………………………………
………………………………………………………………………………………………………
………………………………………………………………………………………………………

Student’s Signature: ……………………………………… Date: .....................................

Comments by Industrial based Supervisor:


………………………………………………………………………………………………………

………………………………………………………………………………………………………

……………………………………………………………………………………………………....

Name: ……………………………………………………………………………………………...

Signature: ………………………………………………. Date: ..............................................

KyU is ISO 9001:2015 certified Page 9 of 9

You might also like