Scribd
Upload
4 views2 pages

Action Plan_Inhouse - Copy

The document presents a Cause and Effect Diagram identifying various problems related to operators, machines, materials, and methods that contribute to issues such as air leakage, improper functioning of pneumatic cylinders, and weak welding. It highlights factors like operator negligence, voltage fluctuations, and inadequate material specifications as root causes. The diagram serves as a structured approach to analyze and address these operational challenges.

Uploaded by

gaurankit92
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
4 views2 pages

Action Plan_Inhouse - Copy

The document presents a Cause and Effect Diagram identifying various problems related to operators, machines, materials, and methods that contribute to issues such as air leakage, improper functioning of pneumatic cylinders, and weak welding. It highlights factors like operator negligence, voltage fluctuations, and inadequate material specifications as root causes. The diagram serves as a structured approach to analyze and address these operational challenges.

Uploaded by

gaurankit92
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Cause and Effect Diagram

Part Description:

Problem :

Man Machine

Operator Negligence Air leakage from pneumatic pipe & cylinder


Lack of knowledge Pneumatic cylinder not functionign properly
Voltage Fluctuation
Main pressure not sufficient
Clamper not heated properly

more gap between the lamps

Upper and lower clamping pressre less

more distance between part and lamp

Excess pressure put during checking


Paper moisturized checking method not ok
due to long storage

Environment Method
Format No
Rev No
Date

Effect Diagram
Element

Material

e & cylinder
nign properly
Material not as per grade(Paper & Cap)
Paper Height less than specification
perly Glue not demelted properly

e lamps

mping pressre less

part and lamp


Weak Welding

during checking
pull force not defined during checking

Measuring
equipment

You might also like