331 - Saf Holland Fifth Wheels Brochure
331 - Saf Holland Fifth Wheels Brochure
GC 6
Type Lock size Overall height Imposed load D-value Weight Angle of incli- Order no.
[Inch] [mm] [t] [kN] [kg] nation degree
(w1/w2)
Dimensions
(650) (15°)
550
390
280
(15
°)
(425) (12)
1 ca. 570
ca. 590 2
1 ca. 487
ca. 510 2
1 In position “locked”
2 In position “unlocked”
• Please note: This fifth wheel is only to be used for the Mercedes-Benz Actros 4 x 2 in certain configurations.
• Ideal concept for Mercedes-Benz Antos and Actros 4 x 2 (18 t) tractors with the following specifications:
Wheel base 3700 mm with fifth wheel lead 600 mm
• The complete fifth wheel and mounting brackets are available from Daimler.
• For automatic lubrication of the lock mechanism, we recommend the use of our grease dispenser with adap-
tor (Page 162).
• ECE Type Approval no: E11 55R 017836
Type Lock size Overall height Imposed load D-value Weight Angle of inclina-
[Inch] [mm] [t] [kN] [kg] tion degree (w1/
w2)
Dimensions
Repair kit locking mechanism (5, 6, 7, 9, 10, 11, 14, 16, 17) 662101517
Repair kit bearing (12, 32, 34) 662101518
Repair kit wear ring (11,14) 662101534
Repair kit for wear plate (4, 20) 662101656
Repair kit locking (K)* 662101752
Repair kit locking (A) (2, 15) 662101748
Repair kit Operating handle (15, 21, 22, 29) 662101754
Repair kit locking hock (3, 7, 8, 9, 15, 19) 662101755
Repair kit Lubrication tube (26, 27, 28) 662101757
Coupling plate without mounting bracket 1 662134002
1 Coupling plate 1 662129571
2 Automatic latch 1 662129153
3 Locking hook cpl. 1 662134156
4 Slider 2 662134103
5 Coupler jaw cpl. 1 662131107
6 Stopper 1 662129381
7 Locking plate 1 662129387
8 Bush 1 662129374
9 Hex socket head screw M20x40 1 662129600
10 Pin 1 662129375
11 Wear ring 1 662131114
12 Bearing insert 2 662130101
13 Return spring 1 662126411
14 Hex-screw M10x25 2 659112372
15 Hex socket head screw M10x20 7 659112359
16 Circlip 1 659100027
17 Supporting washer 1 659100026
18 Identification plate 1 659120420
19 Guide 1 662129144
20 Flange screw 12 662130114
21 Operating handle 1 662134166
21a Adjustment plate 1 662129158
21b Hex-screw M8x16 2 659112371
22 U-washer Ø10 1 662126175
23 Plug 1 659140916
24 Protecting cap 6mm 2 662126255
26 Lubrication tube complete 1 659144146
27 Grease nipple M8x1 1 662126224
28 Grease fitting cap 1 659144142
29 Return spring 1 662134317
30 Mounting base 1 662129168
31 Mounting bracket Overall height 165mm 2 662134384
Mounting bracket Overall height 190mm 2 662111256
Mounting bracket Overall height 225mm 2 662134389
32 Rubber damping 2 662114110
33 Tensionning bar 2 662129388
34 Hex-screw M20x70 4 659112365
* The coupling is delivered from the factory only with an automatic locking device. It can be retrofitted with the carabiner safety hook using kit
662 101 752.
Type Lock size Overall height Imposed load D-value Weight Angle of incli- Order no.
[Inch] [mm] [t] [kN] [kg] nation degree
(w1/w2)
* Tilt angle in accordance with ISO 1726 for height 128 mm is only guaranteed with our mounting plate MP 486
** Reinforced mounting brackets for applications outside the European Union
1)
No homologation
Dimensions
Repair kit locking hock (10, 10b, 10c, 10d, 19a, 36) 1 662101747
Repair kit locking (A) (19a, 34) 1 662101748
Repair kit locking (K) (17, 19a, 28, 35) 1 662101749
Repair kit Lubrication tube (26a, 27, 29, 30, 37, 40, 46, 47) 1 662101750
Repair kit Return spring (16, 16a) 1 662101751
Coupling plate without mounting bracket 1 662129003
1 Coupling plate 1 662134571
2* Operating handle 13000 - ... 1 662129166
2a Adjustment plate 13000 - ... 1 662129158
2b Hex-screw M8x16 13000 - ... 2 659112371
3 Mounting bracket 128mm 2 662129383
3 Mounting bracket 150mm 2 662129584
3 Mounting bracket 150mm - EXPORT 2 662129384
3 Mounting bracket 185mm 2 662129485
3 Mounting bracket 185mm - EXPORT 2 662129385
3 Mounting bracket 225mm 2 662129389
3 Mounting bracket 250mm 2 662129386
9 Coupler jaw cpl. 1 662129134
10* Locking hook 13000 - ... 1 662129156
10a Stopper 1 662129381
10b Locking plate 1 662129387
10c Bush 1 662129374
10d Hex socket head screw M20x40 1 662129600
11 Pin 1 662129375
12 Wear ring 13000 - ... 1 662129377
12 Wear ring 0 - 12999 1 662129373
13 Rubber damping 2 662114110
14 Tensionning bar 2 662129388
15 Bearing insert 2 662130101
16 Return spring 1 662126411
16a Return spring 1 662129317
17 Clipper with linkage 1 662100574
18 Hex-screw M10x25 0 - 12999 2 659112372
18 Hex-screw M10x25 0 - 13000 2 662126155
19a Hex socket head screw M10x16 0 - 12999 5 662126172
19a Hex socket head screw M10x20 13000 - ... 7 659112359
20 U-washer Ø10 1 662126175
21 Circlip 1 659100027
21a Supporting washer 1 659100026
23 Hex socket head screw M20x80 4 662129606
24 Identification plate 1 659120380
26 Groove pin 3x8 2 662126173
26a Groove pin 4x10 1 662126179
27 Protecting cap 0 - 12999 2 662129393
27 Protecting cap 13000 - ... 5 662126223
28 Rivet 1 662126151
29 Lubrication tube complete L=410 0 - 35177 1 659144106
30 Plug 13000 - ... 1 662129380
34 Automatic latch 1 662129153
35 Latch cpl. 0 - 11999 1 662129376
35 Latch cpl. 12000 - ... 1 662129147
36 Guide 1 662129144
37 Mounting 1 659100029
38 Hex socket head screw M10x25 0 - 12999 2 662111202
Fixing nut 0 - 12999 1 662126176
41
SK-S 36.20 W
Low-Maintenance
For automatic lubrication of the locking mechanism we recommend the use of our grease dispenser with adaptor
(Page 162).
Type Lock size Overall height Imposed load D-value Weight Angle of incli- Order no.
[Inch] [mm] [t] [kN] [kg] nation degree
(w1/w2)
* Tilt angle in accordance with ISO 1726 for height 128 mm is only guaranteed with our mounting plate MP 486
** Reinforced mounting brackets for applications outside the European Union
1)
No homologation
Dimensions
Mounting kit for fifth wheel plate (W) without mounting bracket (13, 14, 15, 662101738
23, 38, 39)
Repair kit Operating handle 1 662101746
Repair kit locking hock (10, 10b, 10c, 10d, 19a, 36) 1 662101747
Repair kit locking (A) (19a, 34) 1 662101748
Repair kit locking (K) (17, 19a, 28, 35) 1 662101749
Repair kit Return spring (16, 16a) 1 662101751
Coupling plate (W) without mounting bracket ( assembly kit necessary) 662131002
1 Coupling plate 1 662129571
2* Operating handle 13000 - ... 1 662129166
2a Adjustment plate 13000 - ... 1 662129158
2b Hex-screw M8x16 13000 - ... 2 659112371
3 Mounting bracket 128mm 2 662129383
3 Mounting bracket 150mm 2 662129584
3 Mounting bracket 150mm - EXPORT 2 662129384
3 Mounting bracket 185mm 2 662129485
3 Mounting bracket 185mm - EXPORT 2 662129385
3 Mounting bracket 225mm 2 662129389
3 Mounting bracket 250mm 2 662129386
9 Coupler jaw cpl. 1 662131107
10 Locking hook 1 662129156
10a Stopper 1 662129381
10b Locking plate 1 662129387
10c Bush 1 662129374
10d Hex socket head screw M20x40 1 662129600
11 Pin 1 662129375
12 Wear ring 1 662131114
13 Rubber damping 2 662114110
14 Tensionning bar 2 662129388
15 Bearing insert 2 662130101
16 Return spring 1 662126411
16a Return spring 1 662129317
17 Clipper with linkage 1 662100574
18 Hex-screw M10x25 0 - 12999 2 659112372
19a Hex socket head screw M10x20 13000 - ... 7 659112359
20 U-washer Ø10 1 662126175
21 Circlip 1 659100027
21a Supporting washer 1 659100026
23 Hex-screw M20x70 4 659112365
24 Identification plate 1 659120380
26 Groove pin 3x8 2 662126173
28 Rivet 1 662126151
29 Lubrication tube complete L=410 0 - 35177 1 659144106
29 Lubrication tube complete L=495 35178 - ... 1 659144146
32 Grease nipple M8x1 0 - 12999 1 662126224
34 Automatic latch 1 662129153
35 Latch cpl. 12000 - ... 1 662129147
36 Guide 1 662129144
38 Slider 1 662131103
39 Flange screw 12 662130114
GREASE
FREE
Type Overall height Imposed load D-value Weight Angle of inclina- Order no.
[mm] [t] [kN] [kg] tion degree
(w1/w2)
* Tilt angle in accordance with ISO 1726 for height 128 mm is only guaranteed with our mounting plate MP 486
** Reinforced mounting brackets for applications outside the European Union
Dimensions
Type Overall height Imposed load D-value Weight Angle of inclina- Order no.
[mm] [t] [kN] [kg] tion degree
(w1/w2)
MAN
SK-S 36.20 D NoLube 148* 20 152 126 9.5° / 13° 66213193502
SK-S 36.20 D NoLube 190 20 152 135 19° / 25° 66213193602
SK-S 36.20 D NoLube 225 20 152 143 24° / 30° 66213193702
*Additional vendor specific mounting plate (8 mm / 18 kg)
Iveco
SK-S 36.20 D NoLube 148* 20 152 126 9.5° / 13° 66213193503
SK-S 36.20 D NoLube 190 20 152 135 19° / 25° 66213193603
SK-S 36.20 D NoLube 225 20 152 143 24° / 30° 66213193703
*Additional vendor specific mounting plate (8 mm / 40 kg)
DAF
SK-S 36.20 D NoLube 190 20 152 135 19° / 25° 66213193604
SK-S 36.20 D NoLube 225* 20 152 143 24° / 30° 66213193704
*For the DAF model 225 mm overall height: cross bar 662131139 is required
• Use overall heights 190 mm and 225 mm only with cross bars, if the overall heights is changed
• Cross bar required; consisting of
– tie rod, complete: 662131142
– cross bar: 662131143
Type Overall height Imposed load D-value Weight Angle of inclina- Order no.
[mm] [t] [kN] [kg] tion degree
(w1/w2)
MAN
SK-S 36.20 D 148* 20 152 126* 9.5° / 13° 66212920002
SK-S 36.20 D 190 20 152 135 19° / 15° 66212920102
SK-S 36.20 D 225 20 152 143 24° / 30° 66212920202
*Additional vendor specific mounting plate (8 mm / 18 kg)
Iveco
SK-S 36.20 D 148* 20 152 126* 9.5° / 13° 66212920003
SK-S 36.20 D 190 20 152 135 19° / 15° 66212920103
SK-S 36.20 D 225 20 152 143 24° / 30° 66212920203
*Additional vendor specific mounting plate (8 mm / 40 kg)
DAF
SK-S 36.20 D 190 20 152 135 19° / 15° 66212920104
SK-S 36.20 D 225* 20 152 143 24° / 30° 66212920204
*For the DAF model 225 mm overall height: cross bar 662131139 is required
• Use overall heights 190 mm and 225 mm only with cross bars, if the overall heights is changed
• Cross bar required; consisting of
– tie rod, complete: 662131142
– cross bar: 662131143
For automatic lubrication of the locking mechanism we recommend the use of our grease dispenser with adaptor
(Page 162).
Type Overall height Imposed load D-value Weight Angle of inclina- Order no.
[mm] [t] [kN] [kg] tion degree
(w1/w2)
MAN
SK-S 36.20 DW 148* 20 152 126* 9.5° / 13° 66213101602
SK-S 36.20 DW 190 20 152 135 19° / 15° 66213101702
SK-S 36.20 DW 225 20 152 143 24° / 30° 66213101802
*Additional vendor specific mounting plate (8 mm / 18 kg)
Iveco
SK-S 36.20 DW 148* 20 152 126* 9.5° / 13° 66213101603
SK-S 36.20 DW 190 20 152 135 19° / 15° 66213101703
SK-S 36.20 DW 225 20 152 143 24° / 30° 66213101803
*Additional vendor specific mounting plate (8 mm / 40 kg)
DAF
SK-S 36.20 DW 190 20 152 135 19° / 15° 66213101704
SK-S 36.20 DW 225* 20 152 143 24° / 30° 66213101804
*For the DAF model 225 mm overall height: cross bar 662131139 is required
• Use overall heights 190 mm and 225 mm only with cross bars, if the overall heights is changed
• Cross bar required; consisting of
– tie rod, complete: 662131142
– cross bar: 662131143
1 Coupling plate (W) without mounting bracket ( assembly kit necessary) 1 662131571
2* Operating handle 13000 - ... 1 662129166
2a Adjustment plate 13000 - ... 1 662129158
2b Hex-screw M8x16 13000 - ... 2 659112371
4 Mounting bracket with pattern of drilling 148mm Mercedes Benz 2 662131120
4 Mounting bracket with pattern of drilling 148mm MAN 2 662131121
4 Mounting bracket with pattern of drilling 148mm IVECO 2 662131122
4 Mounting bracket with pattern of drilling 148mm DAF 2 662131123
6 Mounting bracket with pattern of drilling 190mm Mercedes Benz 2 662131125
6 Mounting bracket with pattern of drilling 190mm MAN 2 662131126
6 Mounting bracket with pattern of drilling 190mm IVECO 2 662131127
6 Mounting bracket with pattern of drilling 190mm DAF 2 662131128
7 Mounting bracket with pattern of drilling 225mm Mercedes Benz 2 662131130
7 Mounting bracket with pattern of drilling 225mm MAN 2 662131131
7 Mounting bracket with pattern of drilling 225mm IVECO 2 662131132
7 Mounting bracket with pattern of drilling 225mm DAF 2 662131133
9 Coupler jaw cpl. 1 662131107
10 Locking hook 1 662129156
10a Stopper 1 662129381
10b Locking plate 1 662129387
10c Bush 1 662129374
10d Hex socket head screw M20x40 1 662129600
11 Pin 1 662129375
12 Wear ring 1 662131114
13 Rubber damping 2 662114110
14 Tensionning bar 2 662129388
15 Bearing insert 2 662130101
16 Return spring 1 662126411
16a Return spring 1 662129317
17 Clipper with linkage 1 662100574
18 Hex-screw M10x25 0 - 12999 2 659112372
19a Hex socket head screw M10x20 7 659112359
20 U-washer Ø10 1 662126175
21 Circlip 1 659100027
21a Supporting washer 1 659100026
23 Hex-screw M20x70 4 659112365
24 Identification plate 1 659120380
26 Groove pin 3x8 2 662126173
28 Rivet 1 662126151
29 Lubrication tube complete L=495 35178 - ... 1 659144146
32 Grease nipple M8x1 0 - 12999 1 662126224
34 Automatic latch 1 662129153
35 Latch cpl. 12000 - ... 1 662129147
36 Guide 1 662129144
38 Slider 1 662131103
39 Flange screw 12 662130114
40 Con rod 1 662131142
41 Strut Ø60,3 (DAF - 1 662131139
225mm)
41 Strut Ø51 1 662131143
Advantage: no additional mounting plate is required for mounting with mounting angles on Volvo vehicles.
Type Overall height Imposed load D-value Weight Angle of incli- Length Order no.
[mm] [t] [kN] [kg] nation degree [mm]
(w1/w2)
• Central lubrication set 659 144 143 can be ordered for models 662 129 206 – 662 129 214
Type Overall height Imposed load D-value Weight Angle of incli- Length Order no.
[mm] [t] [kN] [kg] nation degree [mm]
(w1/w2)
Dimensions
* Mounting angles are required in pairs, consisting of a+b in the requested height. The indicated measure V is measured during mounting of the
brackets on the right hand side in driving direction. A reversal of the mounting angles increases or decreases the coupling point by 25 mm.
** This repair kit is only suitable for sensor fifth wheels fitted with the Volvo/Renault sensor system. The control unit and display in the cab are
not SAF-HOLLAND products.
Advantage: no additional mounting plate is required for mounting with mounting angles on Volvo vehicles.
For automatic lubrication of the locking mechanism we recommend the use of our grease dispenser with adaptor
(Page 162).
Type Overall height Imposed load D-value Weight Angle of incli- Length Order no.
[mm] [t] [kN] [kg] nation degree [mm]
(w1/w2)
Dimensions
* Mounting angles are required in pairs, consisting of a+b in the requested height. The indicated measure V is measured during mounting of the
brackets on the right hand side in driving direction. A reversal of the mounting angles increases or decreases the coupling point by 25 mm.
** This repair kit is only suitable for sensor fifth wheels fitted with the Volvo/Renault sensor system. The control unit and display in the cab are
not SAF-HOLLAND products.
• Bracket mounting
• Available with optional ILS-Slider (Page 136)
• Approved for forced steering
• ECE Type Approval no: E11 55R-01 6172
Add suffix -XL on order number for version with long handle
Dimensions
72
FWAL-E
GREASE
FREE
• Imposed load: 20 t
• D-value: 150 kN
• ECE Type Approval no: E11-55R-016168
• Lock size: 2 Inch
Dimensions
Repair kit fifth wheel cpl. (2, 3, 4, 9, 10, 11, 12, 13, 15, 17, 19, 20, 21, 22, 24, 25, 26, 27, 28, 29) RK-AL-A-E
Repair kit wear ring (9, 26, 27) RK-AL-10680
Repair kit locking mechanism (2, 3, 9, 10, 11, 15, 25, 26, 27, 28) RK-AL-10486
Repair kit for wear plate (30, 37, 38) RK-331-1
Repair kit operating handle (4, 12, 13) RK-AL-10681
Bracket pins / Rubber bush kit (5, 31, 32, 33, 35, 36) RK-AL-0011-3
Coupling plate without mounting bracket FWAL-E-TP
1 Cam plate 1 XA-AL-R
2 Coupler jaw 1 XA-10486-E-P
3 Lock hook 1 XA-10487-P
4 Operating handle 1 XA-10681
5 Pocket Insert 2 XD-10923
6 Guide-/lever 1 XA-11082
8 Hex socket head screw M10x25 4 31008
10 Return spring 1 XB-05843-1P
11 Circlip 1 XB-05855
12 Return spring - inside 1 XB-10489-P
13 Return spring - outside 1 XB-10490-P
14 Sprinh holder 1 XA-11083
15 Circlip 1 XB-08905
16 Spring washer M16 3 XB-LW-M16-Z
17 Hex socket head screw M16x50 3 XB-HCS-M16-50-Z
18 Brake cylinder support 1 XA-11038
19 Release cam 1 XA-10483-AL
20 Return spring 1 XB-10563-1-P
21 Washer 2 XA-10294
22 Bush 1 XA-10810
23 Hex socket head screw M12x40 1 31039
24 Hex-nut 1 XB-HLN-M16-Z
25 Lock pin 1 XA-06344-AL
26 Wear ring 1 XD-10680-P
27 Holder plate 1 XA_10706-1-KTL
28 Adjustment Pin 1 XA-10364-3-AL-P
29 Spacer 1 XA-11248
30 Hex-nut M8 18 XB-08931
31 Rubber bush 2 XB-0011-3
32 Bearing bolt 2 XE-06356-P
33 Clevis crossbar 1mm 2 XB-60144-S2
34 Clevis crossbar 2mm 4 XB-60144-S3
35 Hex socket head screw M12x30 2 31041
36 Hex-nut M12 2 32001
37 Wear plate left 1 XA-08125-L
38 Wear plate right 1 XA-08125-R
39 Mounting bracket 165mm 2 XD-04942-KTL
39 Mounting bracket 195mm 2 XD-04943-KTL
39 Mounting bracket 200mm 2 XD-04944-KTL
40 On Request
Vehicles built from April 1, 2017 and from on-borad computer version ZBR E8, are equipped with the device re-
quired to control the pump.
In collaboration with MAN, SAF-HOLLAND responds individually to all sorts of specific and diverse customer re-
quirements : Whether being used in light trucks, heavy all-terrain transport or for abnormal loads – the SAF HOL-
LAND fifth wheel is the perfect solution for any transport task. Its very low system weight and exceptionally long
service life and exemplary low maintenance costs contribute significantly to the economic efficiency of the entire
vehicle.
Technical Data
Type Lock size Overall height Weight MAN Order MAN Part No. Order no.
[Inch] [mm] [kg] Code
Technical Data
Type Lock size Overall height Weight MAN Order MAN Part No. Order no.
[Inch] [mm] [kg] Code
Technical Data
Type Lock size Overall height Weight MAN Order MAN Part No. Order no.
[Inch] [mm] [kg] Code
Technical Data
SK-S 36.20 RECOLUBE lubrication pump RECOLUBE lubrication pump with lubrica- 81.49101-6081 662 101 781
tion lines without bracket
SK-HD 38.36
SK-S 36.20 H RECOLUBE lubrication pump RECOLUBE lubrication pump without lu- 81.49101-6083 662 101 783
brication lines,
without bracket
SK-S 36.20 bracket with screws and washer 81.49120-0049 662 101 784
3 x M4 x 20
2 x M6 x 20
SK-HD 38.36 bracket with screws and washer 81.49120-0050 662 101 785
3 x M4 x 20
2 x M6 x 20
SK-S 36.20 H bracket + screw kit 1 x bracket + 81.49120-0051 662 101 787
2 x M10 x 20 +
2 x washer
SK-S 36.20 grease tube pre-filled 2 m tube + 81.49501-0067 662 101 786
SK-HD 38.36 3 push-fit plug D6
SK-S 36.20 H
SK-S 36.20 Holland RECOLUBE POWER SKX 372 2 x 400 g cartridge 09.15014-0044 662 101 788
SK-HD 38.36 refill grease
SK-S 36.20 H
SK-S 36.20 Holland RECOLUBE POWER SKX 372 25 kg bucket 09.15014-0043 662 101 789
SK-HD 38.36 bulk pack grease
SK-S 36.20 H
SK-S 36.20 H Lubrication kit (only for RECOLUBE) Lubrication kit with grease tubes – 662 132 043
82
SK-S 36.20 H
Dual Duty Fifth Wheel
Ordering Instructions
• The standard versions listed are not pre-drilled
• Hole patterns for vehicle mounting* are available on request for DAF, Iveco, MAN, Mercedes-Benz Trucks, Re-
nault, Scania, and Volvo, among others.
• Please specify the tractor vehicle brand when placing your order.
• The use of SAF-HOLLAND mounting kits is recommended for mounting the dual-height fifth wheel.
• SAF-HOLLAND height-adjustable fifth wheels are suitable for 4 x 2 tractor units factory-equipped with a
mounting angle for mounting the adjustable height fifth wheel. Other vehicles must be assessed on a case-
by-case basis.
• The dual-duty fifth wheel is designed for the use with 4 x 2 Lowliner semitrailer tractors for volume transport.
• The dual-duty fifth wheel is not suitable for tank, silo and tipper vehicles.
• The dual-duty fifth wheel is not suitable for off-road use.
• Dual-duty fifth wheels are mounted directly onto the vehicle subframe without a mounting plate. The sub-
frame must be designed for lift SK mounting. If not all holes are available in the subframe, these must be
drilled by the customer.
• Pre-drilled dual-duty fifth wheels are mounted in the lowered position with the standard fifth wheel lead rec-
ommended by the vehicle manufacturer. All drilled holes must be used (see assembly instructions).
* The hole patterns for vehicle mounting comply with the EURO standard fifth wheel lead that is specified by the vehicle
manufacturers, and recommended in member states of the EU for fifth wheel mounting when the dual-height fifth wheel
is in the lowered position. In a 2-axle tractor vehicle, the standard fifth wheel lead is the distance from the middle of the
rear axle to the middle of the kingpin.
Dimensions
Type Overall height Imposed load D-value Weight Dimensions Order no.
[mm] [t] [kN] [kg] [mm]
Type Overall height Imposed load D-value Weight Dimensions Order no.
[mm] [t] [kN] [kg] [mm]
Mounting Kit
Standard Model
Type Overall height Imposed load D-value Weight Dimensions Order no.
[mm] [t] [kN] [kg] [mm]
MAN
SK-S 36.20 H 167-267 15 110 320 1205x980 662132605E
SK-S 36.20 H 167-317 15 110 324 1205x980 662132606E
SK-S 36.20 H 167-367 15 110 328 1205x980 662132607E
Mercedes-Benz
SK-S 36.20 H* 167-267 15 110 320 1205x980 662132405S
SK-S 36.20 H* 167-317 15 110 324 1205x980 662132406S
SK-S 36.20 H* 167-367 15 110 328 1205x980 662132407S
SK-S 36.20 H** 167-267 15 110 322 1205x1010 662142805S
SK-S 36.20 H** 167-317 15 110 326 1205x1010 662142806S
SK-S 36.20 H** 167-367 15 110 330 1205x1010 662142807S
Scania***
SK-S 36.20 H 167-267 15 110 320 1205x980 662132505D
SK-S 36.20 H 167-317 15 110 324 1205x980 662132506D
SK-S 36.20 H 167-367 15 110 328 1205x980 662132507D
Iveco
SK-S 36.20 H 167-267 15 110 320 1205x980 662132555Z
SK-S 36.20 H 167-317 15 110 324 1205x980 662132556Z
SK-S 36.20 H 167-367 15 110 328 1205x980 662132557Z
DAF
SK-S 36.20 H 167-267 15 110 320 1205x980 662132705T
SK-S 36.20 H 167-317 15 110 324 1205x980 662132706T
SK-S 36.20 H 167-367 15 110 328 1205x980 662132707T
Volvo / Renault D & T Modell****
SK-S 36.20 H 167-267 15 110 320 1205x1010 662142458Z
SK-S 36.20 H 167-317 15 110 324 1205x1010 662142459Z
SK-S 36.20 H 167-367 15 110 328 1205x1010 662142460Z
Renault Magnum
SK-S 36.20 H 167-267 15 110 322 1205x980 662132755Z
SK-S 36.20 H 167-317 15 110 326 1205x980 662132756Z
SK-S 36.20 H 167-367 15 110 330 1205x980 662132757Z
Renault Premium
SK-S 36.20 H 167-267 15 110 322 1205x980 662132655Z
SK-S 36.20 H 167-317 15 110 326 1205x980 662132766Z
SK-S 36.20 H 167-367 15 110 330 1205x980 662132767Z
Ford
SK-S 36.20 H 167-317 15 110 326 1205x1010 662142856
87
Spare Parts SK-S 36.20 H
Type Lock size Overall height Imposed load D-value Weight Angle of incli- Order no.
[Inch] [mm] [t] [kN] [kg] nation degree
(w1/w2)
2"
SK-HD 38.36 2" 150 23 162 185 10° / 10° 662111085
SK-HD 38.36 2" 190 23 162 185 15° / 12° 662111074
3,5"
SK-HD 38.36 3.5" 150 36 260 185 10° / 10° 662111065
SK-HD 38.36 3.5" 190 36 260 185 15° / 12° 662111066
Dimensions
Type Lock size Overall Imposed D-value Weight Angle of incli- Indination Order no.
[Inch] height load [kN] [kg] nation degree degree
[mm] [t] (w1/w2)
2"
SK-HD 38.36.2 G 2" 290 23 162 272 17° / 14° 6,5 662111089
3,5"
SK-HD 38.36 G 3.5" 290 36 260 272 17° / 14° 6,5 662111088
Dimensions
2" Repair kit bearing (73, 74, 78, 79, 80, 81, 84, 85, 86 *)* 2", 3.5" 1 662101487
3,5" Repair kit bearing (73, 74, 78, 79, 80, 81, 84, 85, 86 *)* 2", 3.5" 1 662101487
Conversion kit 3.5" to 2" (9, 12, 18, 24) 1 662101704
Conversion kit 2" to 3.5" (9, 12, 18, 24) 1 662101705
Repair kit locking mechanism (9, 11, 12, 18) 2" 1 662101708
Repair kit locking mechanism (9, 11, 12, 18) 3.5" 1 662101709
1 Coupling plate 1 662111254
2 Operating handle 1 662111276
9 Coupler jaw 2" 1 662111249
9 Coupler jaw 3.5" 1 662111247
10 Locking hook 1 662111239
10a Eccenter 1 662111317
10b Lubrication tube complete L=410 2 659144106
11 Pin cpl. 2 662111347
12 Wear ring 2" 1 662111342
12 Wear ring 3.5" 1 662111343
16 Return spring 1 662126410
16a Return spring 1 662111130
17 Clipper with linkage 3 662100574
18 Hex-screw M12x14 4 659112624
19 Bolt 1 662126449
19a Hex socket head screw M10x20 2 659112359
20 U-washer Ø10 1 662126175
22 Grease nipple M8x1 2 662126224
24 Identification plate 1 659120380
26 Groove pin 3x8 2 662126173
28 Rivet 1 662126151
35 Locking plate 1 662111281
55 Operating handle 2 662111297
56 Stopper 2 662111296
57 Countersink screw M10x20 4 662100371
58 Lock plate 2 662111298
59 Hex-screw M10x25 2 662126155
70 Mounting bracket 2 662111348
71 Rocker 1 662111349
72 Bearing bolt 1 662111306
73 Bearing bush 4 662111300
74 O-ring 6 662111301
75 Distance washer 4 659122075
76 Cam plate 1 662111304
77 Clamping sleeve 1 662111307
78 Locking plate 2" 1 662111305
79 Locking plate 3.5" 2 662111308
80 Hex socket head screw M20x45 4 662111203
81 Hex socket head screw M14x30 2 2088100000
050
82 Circlip 2 662111302
83 Distance washer 2 659122074
84 Grooved cylindrical pin 8 662111311
85 Extension 1 662111312
86 Grease nipple M8x1 6 662126224
* Repair kit 2“ and 3.5“ identical
• 3½" extra heavy duty fifth wheel manufactured from high strength cast steel, designed for the most demand-
ing applications
• Minimum operating temperature −40 °C
• Suitable for rear axle steering systems
• PLEASE NOTE: Not authorized for road transport
Type Lock size Overall height Imposed load D-value Weight Order no.
[Inch] [mm] [t] [kN] [kg]
Dimensions
• Cast steel
• PLEASE NOTE: Not authorized for road transport
Type Lock size Overall height Imposed load D-value Weight Order no.
[Inch] [mm] [t] [kN] [kg]
Dimensions
Repair kit locking mechanism 2" (4-6, 10, 25, 40) 2" 1 RK-65024
Repair kit locking mechanism 3.5" (4-6A, 10, 25, 40) 3.5" 1 RK-65024-1
Repair kit fifth wheel cpl. 2" (2-24, 40) 2" 1 RK-65012
Repair kit fifth wheel cpl. 3.5" (2-6A, 7-24, 40) 3.5" 1 RK-65013
1 Fifth wheel top plate 1 XA-115-1
2 Cotter pin 1/4"x2" 1 XB-5
3 Lock pin 1 XA-1016-C
4 Cotter pin 1/4"x2,5" 1 XB-T-60
5 Lock pin 1 XA-FW-108-D-1
6 Lock kit 2" 1 XA-FW-104-D
6a Lock kit 3.5" 1 XA-FW-104-03
7 Spring 1 XA-FW-128
8 Cotter pin 1/8"x1" 1 XB-16
9 Operating handle with saver 1 XA-FW-138
10 Secondary lock arm 1 XA-FW-137-2-KTL
11 Spring 1 XB-1028-2
12 Hex-screw 1/2 - 20x1,75" 1 XB-2083
13 Washer 1/2" 1 XB-T-49
14 Hex-nut 1/2"-20" 1 XB-T-69-A
15 Lever, Release 1 XA-1005-FDS
16 Operating handle 1 XA-1117-13
17 Repair kit locking mechanism cpl. 1 XA-1104-KTL
18 Spring 1 XB-1007
19 Locknut 1"-14 1 XB-04473
20 Hex socket head screw 1 XB-2001
21 Nut 5/8"-11 1 XB-HNH-38C
22 Adjusting Block 1 XD-3123-1
23 Spring 1 XB-403-KTL
24 Bush 1 XB-02949
25 Grease nipple 45° 2 XB-767-C
26 Grease nipple 2 XB-H-38
27 Axle 1 XA-FW-106
28 Claming piece 2 CA-FW-113-D
29 Spacer 4 XB-03371
30 Hex socket head screw 3/4"-16x3" 2 XB-772
31 Washer 2 XB-PW-1316-112
32 Nut 3/4"-16 2 XB-769
33 Axle bearing 2 XA-FW-103
34 Mounting bracket 270 mm 2 XA-FW-102
35 Bush 2 XA-FW-107
36 Hex socket head screw 7/8"-14x4" 8 XB-08914
36a Hex socket head screw 1"-8x4" 8 XB-FW-109
37 Hex-nut 7/8"-14 8 XB-T-307
37a Hex-nut 1"-8 8 XB-C-41
40 Adjusting Block 1 XA-05768
* with sensor
• The load limits given are valid for operation with speed limited to 35 km/h maximum and for use on well
maintained roadways and yards within distribution depots and dockyard areas.
• Specification with optional manual secondary lock for operation on public roads.
• The versions without additional securing have a permissible total towing weight of 100,000 kg.
Dimensions
Repair kit fifth wheel cpl. (2-3, 5-16, 18, 24) RK-3510-TR-2
Repair kit fifth wheel cpl. (2-16, 18-24) RK-3510-TR
Repair kit locking mechanism (13, 18-22) RS-91103
Repair kit sensor (25-29) RS-91118
Repair kit bearing (17, 35-37) RS-91139
Lock bar (30-34) RS-91141
1 Coupling plate without mounting bracket 1 XA-351-E-U2
2 Hex socket head screw M12x50 2 31036
3 Hex-nut M12 2 32001
4 Pneumatic cylinder 1 XA-3542-R-T
5 Return spring - outside 1 XB-10088
6 Return spring - inside 1 XB-10087
7 Cam plate 1 XA-10099
8 Hex socket head screw M12x50 1 XB-10035
9 Cam roller 1 XA-1507
10 Spring 1 XB-1505-P
11 Yoke shaft 1 XA-1706-1
12 Spring 1 XB-07628-P
13 Holder for cable tape 2 XA-10096
14 Yoke 1 XA-10094
15 Washer 2 XB-76004
16 Bush 1 XA-1029
17 Pocket Insert 2 XB-10210
18 Nut M27 2 32027
19 Grease nipple 45° - M8x1 2 38026
20 Lock pin 2 XA-E-60043
21 Spring washer M27 1 33027
22 Lock jaw kit 1 XA-08332-1-P
23 Washer (Knorr) 1 XB-07431
24 Distance washer 1 XA-09040
25 Sensor 351 - 24V 1 XA-76204
26 Cable clip 1 XB-01961
27 Holder for sensor 1 XB-09976
28 Bolt 1 XB-76050
29 Hex socket head screw M6x16 2 XB-76049
30 Lock bar 1 XA-3528
31 Spring, Torsion 1 XB-2149-P
32 Spiral pin 1 XB-21-S-500-2750
33 Washer 1 33031
34 Zuggriff-Manuelle Sicherung 1 XA-3546
35 Bearing bolt 2 XE-06356-KTL
36 Hex-nut M12 2 32001
37 Hex socket head screw M12x30 2 31041
38 Identification plate 659120420
2"
FW0E70-02-T 2 45 100 FW0E70-02-T
3,5"
FW0E70-03-T 3.5 45 120 FW0E70-03-T
• The load limits given are valid for operation with speed limited to 35 km/h maximum and for use on well
maintained road ways and yards within distribution depots and dockyard areas.
Dimensions
114