0% found this document useful (0 votes)
3 views

Addplug

ADDPLUG is a high-performance hydrophilic polymer designed for plugging zones of lost circulation by absorbing water and swelling significantly. It is a cost-effective solution that can be mixed with water and pumped into boreholes, with a recommended usage ratio of 0.25 to 1 kg per 1000 liters. The product has a two-year shelf life and is packaged in 15 kg bags or pails.

Uploaded by

Chitralekha Pal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
3 views

Addplug

ADDPLUG is a high-performance hydrophilic polymer designed for plugging zones of lost circulation by absorbing water and swelling significantly. It is a cost-effective solution that can be mixed with water and pumped into boreholes, with a recommended usage ratio of 0.25 to 1 kg per 1000 liters. The product has a two-year shelf life and is packaged in 15 kg bags or pails.

Uploaded by

Chitralekha Pal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ADDPLUG

The High-Performance Plug Polymer

ADDPLUG is a high-performance hydrophilic polymer with extreme water absorbance capacity


which enables plug formation in the zones of lost circulation.

Application
Product performs as plug in the zones of lost circulation. It holds water by absorption and plugs
fissures and high permeable zones by swelling to many times of its actual size. The fine particles
swell together in the zone and completely fill the area.
Properties
Chemical Composition Copolymer
Appearance White granular powder
Hydrated - Transparent Gel
Bulk Density 0.62 to 075 gm per CC
0.9 % NaCl Absorption
Capacity ( g / g ) 15-20
Maximum absorbance 300 in de-ionized water.
Shelf Life Two years from date of manufacturing
when kept in ideal condition
User Guidelines
Product should be dispersed in fresh water before pumping in the bore hole. When swelling is
visible it should be pumped to the zone of lost circulation. Drilling may commence after 30 to 45
minutes of pumping the mixture in the bore hole. Product may be used in a ratio of 0.25 to 1 kg per
1000 liters of water as per requirement. Product mix in water should be free flowing for application
into the borehole.
Characteristics and benefits
1. ADDPLUG is a cost-effective product which provides easy to use solution to plug the lost
circulation zone and continue drilling operation.
2. In case of high chattering in hole this product can be used periodically to reduce the
phenomena.
Packing
15 kg in HDPE bags / pails

For further information, please write to:


AB Emultech Private Limited
Flat No B 501, 5th Floor, Jalaram Mangalam
Hingna Road, Nagpur (Maharashtra) INDIA
Email – [email protected]

DISCLAIMER

THIS PRODUCT LITERATURE IS BASED ON DATA CONSIDERED ACCURATE. HOWEVER NO WARRANTY IS EXPRESSED
OR IMPLIED REGARDING THE ACCURACY OF THESE DATA OR THE RESULTS TO BE OBTAINED FROM THE USE
THEREOF. AB EMULTECH PRIVATE LIMITED ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY
DAMAGE TO VENDORS OR USERS.

You might also like