We have the solution...

...the future has a name

Basic Programme
Reg.-Nr. 17581-04 Reg.-Nr. 17581-04
Layout:
Dipl. Designerin Andrea Dörn
Nadja Grabowski, Marketing

Text:
H. J. Abendroth
Nadja Grabowski

Printing:
HW-Druckservice GmbH

Front page:
Archive
 Table of contents:
The LUBRICANT CONSULT GMBH Page 4

Index according to application ranges Page 5 to 6

Alphabetic index of the basic programme Page 7 to 8

Detailed product information subdivided into application ranges Page 9 to 32

Certificates Page 33 to 34

Please note:

This brochure only contains product information. For specific information please refer to our technical data and safety data sheets. The
indications made represent the present state of development and knowledge of LUBRICANT CONSULT GMBH. Subject to change.
The products are subject to severe controls of manufacture and comply in full with the specifications set forth by our company, but due to
the multitude of different influencing factors, we cannot assume any warranty for the successful application in each individual case.
Therefore, we recommend to perform field tests. We strictly refuse any liability.

Headquarters with laboratory

and test field (archive)

3
Your Partner
for the Lubrication of Bearings

The Company:

The LUBRICANT CONSULT GMBH is one of the leading developers and manufacturers in the lubrication engineering sector.
In 1980 the company was founded by Jürgen Engelke with its headquarters in Maintal near Frankfurt, meanwhile subsidiaries have
followed in Switzerland, Austria, France, Italy, Poland, Slovenia, Czech Republic and in the USA.
An extensive network of sales representatives in Germany and distributors in all parts of the world ensure the distribution around the
globe.

Quality:

An innovative team of chemists and engineers is permanently meet the high requirements of international quality standards.
preoccupied in our own laboratories with the research and
development of special lubricants that are unique on the market. A Quality and Environment Management established in June
The extraordinary performance of the LUBCON lubricants 1996, certified according to DIN EN ISO 9001 and 14001, has
results from the combination of selected raw materials, additives scrupulously ensured that only raw materials are used without
and modern production methods. any ingredients harmful to the environment and to preserve the
The quality management is a central concern, therefore all environmental resources as much as possible.
steps within the manufacturing process are constantly reviewed
and subject to strict manufacturing controls. All our products LUBCON products are not liable to identification marking.

Service:

An important factor to achieve a long service life, high Did you know
operational reliability and efficiency is the selection of the right that LUBCON lubricants are applied for your safety worldwide
lubricant. every day?

Whatever you need - from the consultation on tribological e. g. in single-lever mixers of water fittings
questions and the realization of your individual requirements to in energy regulators in electric stoves
the setting into operation of the lubricant - LUBCON is the in the Airbus aircraft
partner at your side worldwide. in the Ariane carrier rocket
in the Formula 1 by Sauber-Petronas, Jordan and Benetton
And that is not yet all… in vehicle components lubricated for life
The TOTAL LUBE MANAGEMENT enables you to work even in the food production with specially approved (NSF-H1)
more efficient and more economic than ever before. food lubricants
This performance includes in large open gear drives of cement mills, in small gears of
dental turbines
ELABORATION of lubricant charts for your company in large bearings in the open pit mining, in miniature bearings
DELIVERY of the lubricants determined in the lubricant of computers
charts in conveyor chains of paint dryers, in transport chains of
LUBRICATION of the individual plant installations with the refrigerating plants etc.
lubricants listed in the lubricant chart
DOCUMENTATION of the lubrication processes
CONCEPTION of lubricating systems for oils and g reases LUBCON philosophy:
SETTING INTO OPERATION of the lubricating systems … the right LUBCON product at the agreed date:
PROCUREMENT of production means, e. g. grease guns, … 100 ml tubes, 400 ml sprays, 400 ml cartridges, 1 kg cans, 5 l
grease nipples, lubricant supply systems, etc. canisters, 20 l canisters, 5 kg buckets, 25 kg buckets, 180 kg
FILLING of rolling bearings in small series with the greases drums, 200 l drums or the 1000 l container are just a small
indicated by you selection of the packing units possible...

4
 Table of contents

1.0
Page
Group 1.0: Industrial Branches 1.1. Foodstuff Industry
9 - 10
Users: bakeries wine press houses
dairies beverage industry
cheese-dairies tinning industry
slaughter houses farinaceous food and confectionery
breweries manufacturers etc.

1.2. Textile Industry

11 - 12
Users: outfitters
spinning mills
weaving mills

Application range spindle bearings

spinning rings
knitting machines
hosiery machines
chains
stenter frames
fan bearings
width adjustment spindles
washing and dyeing machines
1.3. Paper Industry
13 - 14
OEM: Agnati MHI
BHS Olivini
Friese Peters
Massenzana Terdeca etc.

Application range lubrication by circulation

calenders, paper machines
dry and wet end section
centralised lubricating systems
1.4. Foil Industry
15
OEM: Berstorff Dornier
Ramisch Kampf
Brückner MHI etc.

Application range calender

stretching machines
r iku/clips
roller chains
guide rails
1.5. Chip Board Industry
16 - 17
OEM: Dieffenbacher Hymmen
Küsters Bison etc.
Siempelkamp

Application range grinding machines

belt reversing pulleys
belt lubrication
guiding pulleys
rolling rods (bending rods)
roller chains
transverse and longitudinal sealing strips
open gears
1.6. Machine Tool Industry
18
Rolling bearing manufacturer: FAG NSK/RHP
GMN NTN
GRW SKF
IBC SNFA
INA Torrington u. A.

Application range spindle bearings

rolling bearings

5
 Table of contents

Page
1.7. Glass Industry
19
Application range flat and hollow glass
1.8. Vacuum and Nuclear Industry
20 - 21
Application range pumps
rolling and sliding bearings
seals

2.0
Group 2.0: Household Appliances
Application range electric and gas energy regulators
small gears
22

plastic parts

3.0
electric motors

Group 3.0: Marine and Harbour

23
Application range harbour maintenance
deck machinery

4.0
Group 4.0: Medical Devices
Application range dental oil
srew spindles
24

steriliser seals
hospital beds (swivelling rollers)

5.0
Group 5.0: Valves and Fittings
Application range hot and cold water
25 - 26

natural gas, propane, butane and town gas

oxygen, liquid and gaseous
foodstuff

6.0
Group 6.0: Traffic Engineering 6.1. Aviation and Space Flight

Application range gears and vacuum pumps

wheels and plastic parts
27 - 28

6.2. Road and Rail Engineering

29 - 30
Application range running edges and guiding surfaces
wheel flanges and switches
wheels and door closing gears
seals

6.3. Vehicle Industry

31
Application range belt tensioning rollers
starters
generators
elastomeres
seat lubrication (rails, back and
height adjustment)
electric window winders
locking systems
sun visors
exterior mirrors
stepper motors

7.0
Group 7.0: Sprays for Different Applications
32

6
 Alphabetic Index
of the Basic Programme

LUBCON-Products Application Range Page

CORROLUB CAK - line

®
Marine/Harbour 23
CORROLUB CAN - line
®
Marine/Harbour 23
CORROLUB HT 161
®
Marine/Harbour 23
ELASTOLUB K - line
®
Household Appliances 22
ELASTOLUB mv - line
®
Medical Devices 24
ELEFANTENMILCH Foodstuff Industry 9
GRIZZLYGREASE® No. 1 Spray for Different Applications 32
HITEMPOIL - line Vacuum and Nuclear Industry 20
KORROQUICK Spray for Different Applications 32
NEOLUBE No. 1 Vacuum and Nuclear Industry 21
PROFIOIL - Spray Spray for Different Applications 32
RAPID GÖ Spray for Different Applications 32
RAPID GT Spray for Different Applications 32
SINTONO TERRA HL 1
®
Road and Rail Engineering 30
SINTONO TERRA SK
®
Road and Rail Engineering 30
SINTONO TERRA SK - line
®
Marine/Harbour 23
SINTONO TERRA Super
®
Road and Rail Engineering 30
SINTONO® TERRA W Road and Rail Engineering 30
SINTONO VAC - Fluid - line
®
Vacuum and Nuclear Industry 20
TERRAGLISS WZ Road and Rail Engineering 30
TERRASOL W - line Marine/Harbour/Road and Rail Engineering 23/29
THERMOPLEX 2 HPL Vehicle Industry 31
THERMOPLEX 2 TML Machine Tool Industry/Household Appliances 18/22
THERMOPLEX 2 TML Spezial Vehicle Industry 31
THERMOPLEX TTF 122 Aviation and Space Flight 28
TURMO®CUT - line Paper Industry 13
TURMO DENT H1 plus
®
Medical Devices 24
TURMOFILM GREASE HT 2
®
Foil Industry 15
TURMOFILM OIL 220/300
®
Foil Industry 15
TURMOFLUID 40 B
®
Textile-/Foil Industry 11/15
TURMOFLUID 40 B Spray
®
Textile Industry/Spray for Different Applications 12/32
TURMOFLUID 300 OM Spray
®
Textile Industry/Spray for Different Applications 12/32
TURMOFLUID® ED 13 Spray for Different Applications 32
TURMOFLUID GVK 460
®
Household Appliances 22
TURMOFLUID LMI 300
®
Foodstuff Industry 9
TURMOFLUID LMI 300 Spray
®
Foodstuff Industry 10
TURMOFLUID TTO 12 + TTO 24
®
Aviation and Space Flight 27
TURMOGEAR OIL PE - line
®
Paper-/Glass Industry 13/19
TURMO GEL HVS 161
®
Vehicle Industry 31
TURMO GLAS BK 270
®
Glass Industry 19
TURMOGREASE GA 280
®
Valves/Fittings 25
TURMOGREASE GHM 200 plus
®
Valves/Fittings 26
TURMOGREASE GVK 2 TF
®
Household Appliances 22
TURMOGREASE® Highspeed L 182 Machine Tool Industry 18
TURMOGREASE® Highspeed L 252 Machine Tool Industry 18
TURMOGREASE Li 802 EP
®
Chip Board-/Machine Tool Industry 17/18
TURMOGREASE Li AzR
®
Aviation and Space Flight 28
TURMOGREASE N 502
®
Vehicle Industry 31
TURMOGREASE N 7501 K
®
Vehicle Industry 31
TURMOGREASE NAK 500 MF
®
Valves/Fittings 26
TURMOGREASE RVS
®
Vehicle Industry 31
TURMOGREASE SEB 3
®
Valves/Fittings 26
TURMOGREASE SKL 18
®
Vehicle Industry 31

7
Alphabetic Index
of the Basic Programme

LUBCON-Products Application Range Page

TURMOLUB® MA 2 Medical Devices 24

TURMOLYB® MDC Spray Textile Industry/Aviation/Space Flight/Spray for Different Applications 12/28/32
TURMOLYB® PSP Spray for Different Applications 32
TURMOLYB® WG Spray for Different Applications 32
TURMOPAST ® HTP 3200 KW Textile Industry 12
TURMOPAST TAS - WT 000 CRY
®
Aviation and Space Flight 28
TURMOPAST TF
®
Aviation and Space Flight 28
TURMOPOL OIL EP - line
®
Paper Industry 13
TURMO®SYNTH 2000 + 2000 EL Foodstuff Industry 10
TURMO®SYNTHGREASE AL - line Foodstuff Industry 10
TURMO®SYNTHGREASE ALN - line Foodstuff Industry 10
TURMO®SYNTHGREASE GL 320 Vehicle Industry 31
TURMO®SYNTHGREASE W 2502 Household Appliances 22
TURMO®SYNTHGREASE W - line Foodstuff Industry 10
TURMO®SYNTHOIL 75 TF Foodstuff Industry 10
TURMO®SYNTHOIL GV - line Foodstuff Industry 9
TURMO®SYNTHOIL SKE 320 Foodstuff Industry 9
TURMO®SYNTH VG - line Foodstuff Industry 9
TURMOTEMP® II/400 CL 1 Vacuum and Nuclear Industry 21
TURMOTEMP® II/400 dl fluid Vehicle Industry 31
TURMOTEMP® II/400 KL Household Appliances 22
TURMOTEMP® II/400 RS 2 Paper-/Foil Industry 14/15
TURMOTEMP® II/400 VAC 1 Vacuum and Nuclear Industry 21
TURMOTEMP® II/400 OX Valves/Fittings 26
TURMOTEMP® LM 182 Vehicle Industry 31
TURMOTEMP® LP 2502/5002 Paper Industry 14
TURMOTEMP® M 802 Valves/Fittings 26
TURMOTEMP® Super 2 EP Paper Industry 14
TURMOTEMP®OIL 400 - line Vacuum and Nuclear Industry 20
TURMOTEX® I/300 Textile Industry 12
TURMOTEX® CAN 2502 Textile Industry 12
TURMOTEX® Highspeed L 252 Textile Industry 12
TURMOTEX® M 50 Textile Industry 11
TURMOTEX® N 2 Textile Industry 12
TURMOTEX® Trak 50 Textile Industry 11
TURMOTEX®OIL LP - line Textile Industry 11
TURMOTEX®OIL RP - line Textile Industry 11
TURMOWOOD®GREASE HT 2 Chip Board Industry 17
TURMOWOOD®GREASE PM 2 Paper-/Chip Board Industry 14/17
TURMOWOOD®OIL 1 Chip Board Industry 16
TURMOWOOD®OIL 2 Chip Board Industry 16
TURMOWOOD®OIL 300 OM Chip Board Industry 16
TURMOWOOD® PFPE Chip Board Industry 17
TURMOXYGEN® - line Valves/Fittings 26
TURMSILON® GL 320 Valves/Fittings 25
TURMSILON® GTI 5000 Vacuum and Nuclear Industry 21
TURMSILON® GTI 6001 Valves/Fittings 25
TURMSILON® K 6000 Valves/Fittings 25
TURMSILON® K...- line WR Chip Board Industry 16
TURMSILON® LMI 5000 Foodstuff Industry 10
TURMSILON® M 100 Spray Foodstuff Industry 10
ULTRATHERM 2000 Vacuum and Nuclear Industry/Aviation and Space Flight 21/28
ULTRATHERM LS 1503 Vacuum and Nuclear Industry 21
ULTRATHERMOIL VG - line Vacuum and Nuclear Industry/Aviation and Space Flight 20/27

8
 1.0 1.1.
Foodstuff Industry

Oils:
Physiologically recognised as safe, inodorous and tasteless lubricating oils which meet the requirements of § 5 of the German food act
(LMBG) and the FDA 21 CFR 178.3570. As NSF registered H1-products their contact with foodstuff is admissible.

TURMOFLUID® LMI 300

- fully synthetic For all lubrication and friction points in the foodstuff and bever-
- colour: almost colourless/transparent age industry to be maintained by means of a physiologically
- temperature application range: -10 °C to +220 °C harmless oil. As separating and sliding agent in the manufacture
- high load carrying capacity of baker's ware.
- resistance to oxidation

TURMO®SYNTHOIL GV - line
- fully synthetic High and low temperature oils for difficult service conditions or
- colour: clear/almost colourless long-term application, e. g. lubrication of compressors, gears,
- temperature application range: -50 °C to +180 °C hydraulics and chains.
- improved lubricating properties
- best load carrying capacity, low coefficients of friction
- resistance to oxidation

TURMO®SYNTHOIL SKE 320

- fully synthetic High temperature oil for conveyor chains in drying plants and
- colour: transparent ovens in the beverage and food industry. It provides reduced
- temperature application range: up to +240 °C lubricant consumption and reduces the formation of residues
- extremely low evaporation and smoke at high temperatures.
- excellent viscosity-temperature behaviour
- optimum wearing protection TURMO®SYNTH VG 320 CB is the thin liquid alternative for the
- resistance to oxidation application in centralized lubricating systems.

TURMO®SYNTH VG - line
- partly synthetic Universally applicable foodstuff oils suitable for all friction points
- colour: clear/almost colourless with oil lubrication, e. g. hydraulics, gears, bearings, chains,
- temperature application range: -10 °C to +120 °C spindles, lifters and articulations.

Emulsion:
ELEFANTENMILCH
- biologically degradable This emulsion is a special lubricant mainly used in the con-
- colour: white fectionery industry, e. g. wrapping and packing machines, pre-
- sugar dissolving forming and tin foiling machines, rocker levers, joints, lifters,
- ready-to-use spindles, chains and pincers.

The different kinds of "short noodles" with the brand "Fitmacher" of the company
"Teigwaren Riesa", D-Riesa are produced with modern machines since July 2000.

9
1.0
1.1.
Foodstuff Industry

Greases:
Physiologically recognised as safe, inodorous and tasteless lubricating greases which meet the requirements of § 5 of the German food
act (LMBG) and the FDA 21 CFR 178.3570. As NSF registered H1-products their contact with foodstuff is admissible.

TURMO®SYNTHGREASE AL - line
- partly synthetic
- colour: light-coloured/transparent
- service temperature range: -40 °C to +120 °C
- resistant to cold and hot water
- good adhesive properties
- good pumpability in centralised lubricating systems
These greases have been successful for rolling and sliding
TURMO®SYNTHGREASE ALN - line bearings, guiding tracks, sliding rails, cylinder guides, rollers,
- fully synthetic cam disks, gear rims and rods for filling and capping machines,
- colour: yellowish washing machines, transporting and sorting installations, wine-
- service temperature range: -30 °C to +180 °C presses as well as for tubular tracks and rolling hooks in
- resistant to cold and hot water as well as to steam slaughter houses.
- high thermal stability Universal greases for all grease lubricating points in the
- good load carrying capacity, low coefficients of friction beverage industry, in dairies, cheese-dairies, slaughter houses,
- good wearing protection, resistant to oxidation meat and sausage production, for the fish industry, confection-
- good pumpability in centralised lubricating systems ery, baker's ware and farinaceous food industry, for poultry
processors and manufacturers of canned food, nutrients, frozen
TURMO®SYNTHGREASE W - line food, for canteen kitchens and coffee roasters.
- partly synthetic
- colour: light-coloured/beige
- service temperature range: -20 °C to +120 °C
- resistant to cold and hot water as well as to media
- good load carrying capacity
- good wearing protection
- good pumpability in centralised lubricating systems

TURMO®SYNTH 2000 + 2000 EL

- partly synthetic Lubricants for the foodstuff and beverage industry. Applicable
- colour: beige/transparent for keg racking machines, fittings in storage cave, in dispensers,
- service temperature range: -20 °C to +120 °C seals (EPDM) as well as in rolling and sliding bearings in the
- resistant to cold and hot water, can be steamed foodstuff engineering.
- dynamically light, well adhesive
- neutral towards beer foam
- resistant to disinfectants

TURMSILON® LMI 5000

- fully synthetic Applicable in the lubrication of beer and bar fittings, filling and
- colour: white feeding fittings with EPDM seals as well as rubber seals, e. g.
- service temperature range: -50 °C to +220 °C collars, membranes and lip seals.
- resistant to cold and hot water, can be steamed
- neutral towards beer foam
- resistant to disinfectants
- neutral towards elastomers (NBR, EPDM etc.),
except for silicon caoutchouc

Sprays:
Physiologically recognised as safe, inodorous and tasteless sprays which meet the requirements of § 5 of the German food act (LMBG)
and the FDA 21 CFR 178.3570. As NSF registered H1-products their contact with foodstuff is admissible.

TURMOFLUID® LMI 300

- silicon-free

TURMO®SYNTHOIL 75 TF Fully synthetic lubricating and separating agent, applicable in all

- silicon-free sectors of the foodstuff industry.

TURMSILON® M 100
- containing silicon

10
 1.0 1.2.
Textile Industry

Oils:

TURMOFLUID® 40 B
- fully synthetic Suitable for the lubrication of all driving chains and conveyor
- colour: yellowish chains (textile stenter frames).
- service temperature range: -30 °C to >+250 °C
- good viscosity-temperature behaviour
- low evaporation loss
- high load carrying capacity
- silicon-free, does not polymerise
- high wearing protection
- resistant to oxidation

TURMOTEX® M 50
- fully synthetic High performance oil for the impregnation of all sinter bearings
- colour: yellow/transparent and all types of sintered spinning and twisting rings (PSM),
- flat viscosity-temperature behaviour sliding bearings of precision instruments with excellent
- low friction properties regarding operating reliability and economic
- reducing temperature and wear efficiency.
- resistant to oxidation

TURMOTEX®OIL LP - line
- partly synthetic
- colour: yellowish/clear These oils are suitable for the lubrication of needles, sinkers,
- good heat dissipating properties needle and sinker cylinders, needle and sinker ducts, spinning
- good wetting properties, superfine metering rings.
- completely scouring
- reducing wear

TURMOTEX®OIL RP - line
- fully synthetic
- colour: clear/transparent These oils are suitable for the lubrication of needles, sinkers,
- high load carrying capacity needle and sinker cylinders, needle and sinker ducts, spinning
- good wetting properties, superfine metering rings, even when exposed to high mechanical loads.
- completely scouring
- reducing wear

TURMOTEX® Trak 50
- fully synthetic Particularly suitable for the lubrication of infinitely variable
- colour: slightly yellowish automatic gears (frictional wheel, PIV etc.).
- not applicable for standard gears

Vertically rotating slide chain constructed as needle

chain with closed needle protection, guideway and
Partial view of right/right looping procedure (Groz-Beckert KG, slide bolt are lubricated (Brückner Trockentechnik
D-Albstadt) GmbH & Co KG, D-Leonberg)

11
1.0
1.2.
Textile Industry

Greases:

TURMOPAST® HTP 3200 KW

- fully synthetic Special grease for the lubrication of textile steamers.
- colour: whitish
- service temperature range: -40 °C to +300 °C
- resistant to alkalis, acids and hydrocarbons

TURMOTEX® CAN 2502

- partly synthetic Heavy-duty and high-temperature grease resistant to media.
- colour: beige
- service temperature range: -20 °C to +200 °C
- resistant to cold and hot water, to steam and alkaline solutions
- high load carrying capacity
- good wearing protection

TURMOTEX® Highspeed L 252

- fully synthetic Lubricating grease for high-speed textile spindles with favour-
- colour: beige able friction and noise behaviour, suitable for long-term and for-
- service temperature range: -50 °C to +140 °C life lubrication. This grease replaces the oil and oil mist lubrica-
- supple, work stable tion in many cases. It shows best low temperature properties
- low moment of friction and only slightly warms up when used at high speeds.
- low starting resistance

TURMOTEX® I/300
- fully synthetic Heavy-duty and high-temperature grease not resistant to
- colour: intensive dark blue media.
- service temperature range: -30 °C to +200 °C
- soft consistency
- high load carrying capacity
- good wearing protection

TURMOTEX® N 2
- fully synthetic Lubricating grease offering versatile possibilities of use in
- colour: beige industrial plants, particularly in the presence of aqueous alka-
- service temperature range: -40 °C to +160 °C line, acid cleaning media or scouring media as well as their
- resistant to cold and hot water vapours, following DIN 51807.
- good pumpability in centralised lubricating systems

Sprays:

TURMOFLUID® 40 B
- fully synthetic Suitable for the lubrication of all driving chains and conveyor
- colour: yellowish chains (textile stenter frames).
- service temperature range: -30 °C to >+250 °C
- good viscosity-temperature behaviour
- low evaporation loss
- high load carrying capacity
- silicon-free, does not polymerise
- high wearing protection, resistant to oxidation

TURMOFLUID® 300 OM
- fully synthetic Spray for the lubrication of open drives and wire ropes, chains,
- colour: green/transparent guide ways, gearwheels, sliding points and control cams, if a
- service temperature range: -5 °C to +240 °C good adhesion is required.
- good creeping properties
- adhesive, silencing
- high load carrying capacity
- stays supple at low temperatures

TURMOLYB® MDC
- colour: grey/black MoS2 dry bonded coating for the lubrication of width adjustment
- service temperature range: -180 °C to +450 °C spindles and sliding surfaces at high temperatures.
- resistant to pressure
- extremely adhesive

12
 1.0 1.3.
Paper Industry

Oils:

TURMO®CUT - line
- fully synthetic Oils with excellent properties for the lubrication of disc-
- colour: light-coloured/transparent cut/cutting systems and rotary cutters.
- service temperature range: -40 °C to +240 °C
- good viscosity-temperature behaviour

TURMOGEAR®OIL PE - line
- fully synthetic These oils are specially suitable for the circulation lubrication of
- colour: light-coloured/transparent gears and calender bearings. Outstanding characteristic is their
- service temperature range: -30 °C to +180 °C good water separation ability.
- good viscosity-temperature behaviour
- evaporates residue-free
- high water separation ability
- miscible with mineral oil

TURMOPOL®OIL EP - line
- fully synthetic These oils are particularly suitable for drives with a high power
- colour: yellowish/transparent loss, e. g. worm gears. Also applicable in installations exposed
- service temperature range: -30 °C to +220 °C to heat, such as calender, paper machines or smelting plants if
- thermal stability these are designed for glycol oils.
- high load carrying capacity
- not miscible with mineral oil

Disc cut system (BHS, D-Weiherhammer)

13
1.0
1.3.
Paper Industry

Greases:

TURMOTEMP® II/400 RS 2
- fully synthetic Heavy-duty and high-temperature grease for rolling and sliding
- colour: white bearings. All points of application have to be cleaned fat-free
- service temperature range: -30 °C to +260 °C before use with special detergents, such as TURMOTEMP®OIL
- low vapour pressure 480, acetone, isopropanol or similar products. The full lubrica-
- non-toxic, non-combustible ting effect is only achieved on clean, fat-free and dry materials.

TURMOTEMP® LP 2502/5002
- fully synthetic These greases are used in corrugated roller bearings (card-
- colour: light beige board production), chain return wheels and idle roller bearings
- service temperature range: -30 °C to +260 °C exposed to high temperatures. They do not attack elastomers,
- miscible with PTFE lubricating pastes nor non-ferrous or ferrous metals. All points of application must
- compatible with all materials thoroughly be cleaned before using the lubricating greases.
- cleaning without CFC
- high wearing protection

TURMOTEMP® Super 2 EP
- fully synthetic For all bearing types and all application ranges at temperatures
- colour: whitish up to 280 °C. Environmentally friendly problem solutions for all
- service temperature range: -30 °C to +280 °C kinds of grease lubrication in the upper temperature range. A
- long grease service life water-soluble cold detergent is sufficient to clean the lubricating
- long relubrication intervals points.

TURMOWOOD®GREASE PM 2
- fully synthetic With a continuous relubrication, this grease is the ideal lubricant
- colour: beige for all rolling and sliding bearings in the dry and wet end section
- service temperature range: -40 °C to +220 °C covering a wide temperature range.
- resistant to cold and hot water
- compatible with NBR, FKM, PTFE, PA 6.6
- good pumpability in centralised lubricating systems

Graphic description of corrugated board machine (FARO International GmbH, A-Grossebersdorf)

14
 1.0 1.4.
Foil Industry

Oils:
TURMOFILM®OIL 220/300
- fully synthetic For oil lubricated chains in foil stretching machines exposed to
- colour: yellowish-brown/transparent high temperatures. Due to the synergetic effect of the additives,
- service temperature range: -10 °C to +250 °C far superior to all chain oils known hitherto.
- thermally stable, low evaporation loss
- extremely adhesive, few powder-like residues
- low moment of friction
- does not polymerise
- resistant to oxidation

TURMOFLUID® 40 B
- fully synthetic Suitable for the lubrication of all driving chains and conveyor
- colour: yellowish chains in foil stretching machines.
- service temperature range: -30 °C to >+250 °C
- low evaporation loss
- good viscosity-temperature behaviour
- high load carrying capacity
- silicon-free, does not polymerise
- resistant to oxidation, good wearing protection

Greases:

TURMOFILM®GREASE HT 2
- fully synthetic Suitable for extreme conditions in the lubrication of deep groove
- colour: beige ball bearings, large rolling bearings, such as cylindrical, self-
- service temperature range: -30 °C to +260 °C aligning and tapered roller bearings, as well as angular contact
- resistant to temperatures, vacuum and radiation ball bearings. Lubricants with a drop point are known to become
- good resistance to media softer under thermal load and run back to the contact surfaces,
- chemically stable thus contributing to an optimised lubrication pattern, i. e. the
wear or fretting corrosion is reduced to a minimum.
TURMOTEMP® II/400 RS 2
- fully synthetic Heavy-duty and high-temperature lubricant for rolling and
- colour: white sliding bearings. All points of application have to be cleaned fat-
- service temperature range: -30 °C to +260 °C free before use with special detergents, such as TURMO-
- extremely low vapour pressure TEMP®OIL 480, acetone, isopropanol or similar products. The
- non-toxic, non-combustible full lubricating effect is only achieved on clean, fat-free and dry
- compatible with all materials materials.
- resistant to oxidation

Clip (archive)

15
1.0
1.5.
Chip Board Industry

Oils:
TURMOWOOD®OIL 1
- fully synthetic Suitable for the lubrication of all driving chains and conveyor
- colour: yellowish/transparent chains as well as for the lubrication of belts and rolling rods in
- service temperature range: -30 °C to >+250 °C Conti double belt presses.
- good viscosity-temperature behaviour
- low evaporation loss
- high load carrying capacity
- silicon-free, does not polymerise
- resistant to oxidation, good wearing protection

TURMOWOOD®OIL 2
- fully synthetic Applicable for all driving chains and conveyor chains. Proved of
- colour: blue/transparent excellent results in the lubrication of bending rods in Conti
- service temperature range: -30 °C to +250 °C double belt presses. Exempt from sulphur compounds.
- excellent creeping properties
- low moment of friction, low up-take of current
- non-polymerising (non-toxic)
- high cleaning effect
- resistant to ageing and oxidation

TURMOWOOD®OIL 300 OM
- fully synthetic This oil is particularly suitable for the lubrication of open gears,
- colour: green/transparent ropes, driving chains and conveyor chains.
- service temperature range: -20 °C to +250 °C
- high load carrying capacity, silencing
- extremely adhesive

TURMSILON® K... - line WR

- fully synthetic Thermally stabilized special oils for the lubrication of transverse
- colour: brownish/transparent and longitudinal sealing strips, e. g. in Hymmen double belt
- service temperature range: -50 °C to +280 °C presses.
- very good viscosity-temperature behaviour
- resistant to high temperatures
- good compatibility with elastomers
- low tendency to polymerise

Double Belt Press IsoPress® Type MFC (Hymmen GmbH, Maschinen- und Anlagenbau, D-Biele-
feld)

16
 1.0 1.5.
Chip Board Industry

Greases:
TURMOGREASE® Li 802 EP
- partly synthetic Special grease for heavy duty, high speeds and high temperatu-
- colour: dark brown res for all rolling and sliding bearings (e. g. in grinding machines).
- service temperature range: -35 °C to +140 °C
- long relubrication intervals, low noise
- not resistant to media

TURMOWOOD®GREASE HT 2
- fully synthetic Suitable for extreme conditions in the lubrication of deep groove
- colour: beige ball bearings, large rolling bearings, such as cylindrical, self-
- service temperature range: -30 °C to +260 °C aligning and tapered roller bearings, as well as angular contact
- resistant to temperatures, vacuum and radiation ball bearings. Lubricants with a drop point are known to become
- good resistance to media softer under thermal load and run back to the contact surfaces,
- chemically stable thus contributing to an optimised lubrication pattern, i. e. the
wear or fretting corrosion is reduced to a minimum.
TURMOWOOD®GREASE PM 2
- fully synthetic Due to a continuous relubrication this grease represents the
- colour: beige ideal lubricant for all rolling and sliding bearings in the dry and
- service temperature range: -40 °C to +220 °C wet section.
- resistant to cold and hot water
- compatible with NBR, FKM, PTFE, PA 6.6
- good pumpability in centralised lubricating systems

TURMOWOOD® PFPE
- fully synthetic For the life-time lubrication of rolling bearings running at low
- colour: white speeds, e. g. belt reversing pulleys. All points of application have
- service temperature range: -30 °C to +260 °C to be cleaned fat-free before use with special detergents, such
- extremely low vapour pressure as TURMOTEMP®OIL 480, acetone, isopropanol or similar
- non-toxic, non-combustible products. The full lubricating effect is only achieved on clean, fat-
- compatible with all materials free and dry materials.
- resistant to oxidation

Converter Press with a laterally fitted greasing station (Maschinenfabrik J. Dieffenbacher GmbH &
Co., D-Eppingen)

17
1.0
1.6.
Machine Tool Industry

Greases:
THERMOPLEX 2 TML
- fully synthetic This efficient lubricating grease for high temperatures, high
- colour: honey-coloured/transparent loads and high speeds up to n . d m 1.3 million (min-1 · mm) is
- service temperature range: -35 °C to +160 °C successfully used in spindles, electric motors, fans as well as in
- compatible with NBR, FKM, PTFE and PA 6.6 small and miniature bearings.

TURMOGREASE® Highspeed L 182

- fully synthetic This grease is particularly well suitable for smaller rolling
- colour: beige bearings (d < 25 mm) and very high speed factors up to n . dm
m
- service temperature range: -70 °C to +120 °C 2.5 millions (min-1 · mm) as well as for the use at very low
- compatible with NBR, FKM, PTFE and PA 6.6 temperatures and applications requiring a very favourable
behaviour of friction.
TURMOGREASE® Highspeed L 252
- fully synthetic Suitable for the lubrication of spindle and cylindrical roller
- colour: beige bearings for bore sizes of the inner ring below d < 100 mm. It is
- service temperature range: -50 °C to +120 °C the special grease to be used for high-speed rolling bearings up
- compatible with NBR, FKM, PTFE and PA 6.6 to n . dm 2.2 million (min-1 · mm).

TURMOGREASE® Li 802 EP
- partly synthetic This efficient lubricating grease for high temperatures, high
- colour: dark brown loads and high speeds up to n . d m < _ 1 million (min-1 · mm) is
- service temperature range: -35 °C to +140 °C successfully used in spindles, electric motors, fans, small and
- compatible with NBR, FKM, PTFE and PA 6.6 miniature bearings. The versatile possibilities of use allow in
many plants to reduce the high number of different grease types
often encountered nowadays.

High speed spindle bearings (SKF, D-Schweinfurt)

18
 1.0 1.7.
Glass Industry

Oils:
TURMO®GLAS BK 270
- fully synthetic Special synthetic oil for the lubrication of hollow glass manufac-
- colour: brown/transparent turing machines.
- service temperature range: -30 °C to +250 °C
- high load carrying capacity
- miscible with mineral oils

TURMOGEAR®OIL PE - line
- fully synthetic These oils are suitable for the circulation lubrication of gears and
- colour: light-coloured/transparent calender bearings.
- service temperature range: -30 °C to +180 °C
- good viscosity-temperature behaviour
- evaporates residue-free
- high water separating ability
- miscible with mineral oil

IS-Moulding machine (P-D Glas- und Feuerfestwerke Wetro GmbH, D-Freital)

IS-Final product finishing machine (P-D Glas- und Feuerfestwerke Wetro

GmbH, D-Freital)

19
1.0
1.8.
Vacuum and Nuclear Industry

Oils:
HITEMPOIL - line
- fully synthetic These oils are used when a high resistance to radiation is
- colour: clear/transparent/light yellow required.
- service temperature range: +20 °C to +350 °C
- resistant to temperatures and radiation
- neutral towards materials
- resistant to oxidation

SINTONO® VAC - Fluid - line

- fully synthetic These oils are used for the lubrication of rolling and sliding
- colour: clear/transparent bearings and gears in vacuum pumps.
- service temperature range: -40 °C to +250 °C
- resistant to pressure vacuum and radiation
- resistant to media
- absolutely non-toxic

TURMOTEMP®OIL 400 - line

- fully synthetic Suitable for vacuum and oxygen installations, hydraulic
- colour: clear/transparent equipment and for the heat transfer in the high-temperature
- service temperature range: -40 °C to +250 °C range. These oils act as insulators in electric and electronic
- extreme thermal stability, low vapour pressure elements. The pressure dependence of the viscosity is small
- good compressibility, hydrophobic and oleophobic and they have a low surface tension.
- chemically stable, non-combustible
- compatible with metals, plastics and rubber

ULTRATHERMOIL VG - line
- fully synthetic Excellently suitable for the lubrication of gears, rolling and sliding
- colour: clear/transparent bearings in vacuum pumps up to 10-9 mbar.
- service temperature range: -60 °C to +300 °C
- good viscosity-temperature behaviour
- resistant to pressure, vacuum and radiation
- chemically stable, non-combustible

Oil diffusion pump (INFICON AG, SL-Balzers, Liechten-

stein)

20
 1.0 1.8.
Vacuum and Nuclear Industry

Greases:

TURMOTEMP® II/400 VAC 1

- fully synthetic Suitable for the vacuum range up to 10-6 mbar. All points of
- colour: white application have to be cleaned fat-free before use with special
- service temperature range: -35 °C to +280 °C detergents, such as TURMOTEMP®OIL 480, acetone, isopro-
- extremely low vapour pressure panol or similar products. The full lubricating effect is only
- good dielectric properties achieved on clean, fat-free and dry materials.
- compatible with all materials
- non-toxic and non-inflammable
- resistant to oxidation

TURMOTEMP® II/400 CL 1
- fully synthetic For the lubrication of rolling and sliding bearings in the nuclear
- colour: white engineering.
- service temperature range: -30 °C to +260 °C
- resistant to vacuum and radiation up to 108 rad
- non-toxic

TURMSILON® GTI 5000

- fully synthetic For the lubrication of rolling and sliding bearings in the nuclear
- colour: white engineering.
- service temperature range: -50 °C to +220 °C

ULTRATHERM 2000
- fully synthetic Has proven successful since many years in the lubrication of
- colour: white rolling and sliding bearings as well as seals in the ultra vacuum
- service temperature range: -60 °C to +280 °C range up to 10-9 mbar.
- chemically stable and pressure resistant
- non-toxic and non-combustible
- resistant to oxidation

ULTRATHERM LS 1503
- fully synthetic For the lubrication of rolling and sliding bearings in the nuclear
- colour: light beige engineering.
- service temperature range: -70 °C to +260 °C
- resistant to vacuum and radiation up to 108 rad
- non-toxic

Graphite dispersion:
NEOLUBE No. 1
- colour: black Assembly sliding agent for the application on media wetted
- service temperature range: -40 °C to +450 °C surfaces.
- resistant to radiation up to 109 rad

Molecular Drag Pumps (Alcatel Vacuum Technology, France)

21
2.0
2.0
Household Appliances

Oils:

TURMOFLUID® GVK 460

- fully synthetic Lubrication of energy regulators (7 phase and bimetallic switch),
- colour: yellowish/clear snap-ins, cam plates and eccentric disks, material combinations
- service temperature range: -30 °C to +220 °C PA 6.6/nylon/beryllium.
- thermally stable
- low volatility
- neutral behaviour towards elastomers
- excellent wearing protection

ELASTOLUB® K - line
- fully synthetic Silicon containing mould release agent, not overpaintable.
- colour: clear/transparent Excellent heat transfer oils. Lubricants for plastic/plastic and
- service temperature range: -50 °C to +250 °C plastic/metal combinations.
- very good viscosity-temperature behaviour

Greases:
TURMOGREASE® GVK 2 TF
- fully synthetic It is outstanding for the lubrication of drum controllers in energy
- colour: light beige regulators.
- service temperature range: -25 °C to +250 °C
- neutral behaviour towards elastomers
- excellent wearing protection

TURMOTEMP® II/400 KL
- fully synthetic Heavy-duty and high-temperature lubricant for rolling and
- colour: white sliding bearings. All points of application have to be cleaned fat-
- service temperature range: -30 °C to +260 °C free before use with special detergents, such as TURMO-
- extremely low vapour pressure TEMP®OIL 480, acetone, isopropanol or similar products. The
- non-toxic, non-combustible full lubricating effect is only achieved on clean, fat-free and dry
- compatible with all materials materials.

TURMO®SYNTHGREASE W 2502
- partly synthetic Lubrication of gears and bearings in food processors.
- colour: light/beige
- service temperature range: -30 °C to +120 °C
- resistant to cold and hot water as well as to media
- good adhesive properties
- complies with the NSF H1-guidelines
- high wearing protection

THERMOPLEX 2 TML
- fully synthetic Special heavy-duty, high speed and high-temperature grease
- colour: honey-coloured/transparent for all rolling and sliding bearings, e. g. electric motors.
- service temperature range: -35 °C to +160 °C
- low noise

Quadruple energy-switch (BSH Bosch und Siemens Hausgeräte GmbH, D-Traunreut)

22
 3.0 3.0
Marine and Harbour

Oils:
TERRASOL W - line
- fully synthetic These oils are suitable for the lubrication of machines and
- colour: yellowish/transparent devices used in ground water preservation areas. They contain
- service temperature range: -40 °C to +160 °C additives which provide good lubricating properties and,
- good viscosity-temperature behaviour furthermore, improve the low temperature behaviour, i. e. they
- silicon-free, no gumming depress the pourpoint.
- resistant to oxidation
- easily biodegradable

CORROLUB® HT 161
- fully synthetic Special oil with excellent creeping and wetting properties.
- colour: clear/transparent Universally applicable as lubricating and anticorrosion oil with a
- service temperature range: -30 °C to +120 °C high cleaning effect.
- thin-bodied
- high cleaning effect
- compatible with elastomers and plastics
(IIR, NBR, neoprene or PA 6.6, PC, Zytel)
- easily biodegradable

Greases:

CORROLUB® CAK - line

- mineral
- colour: brown
- service temperature range: -20 °C to +150 °C
- optimum water resistance Rolling and sliding bearing greases for low and medium bearing
- high load carrying capacity speeds. Multipurpose greases for universal use in marine and
- high metal affinity harbour applications and also long-term lubricating greases for
- improved friction and wear behaviour high specific bearing loads. Suitable for all electric motors, axle
bearings, bearings with high sliding friction shares, travel
CORROLUB® CAN line motors, spherical liners, pivoting bearings. Specially developed
- fully synthetic for vibrations and pressure loads by shocks particularly in the
- colour: beige presence of increased bearing temperatures, loads and humid
- service temperature range: -30 °C to +200 °C environmental conditions.
- outstanding high pressure and water resistance
- very good work stability and sealing effect
- long service life with bearings exposed to vibrations and shocks
- for-life lubrication of capsuled rolling bearings

SINTONO® TERRA SK - line

- fully synthetic Universal lubricating grease for the lubrication of wheel flanges
- colour: yellowish/transparent and guiding surfaces, rails and rail vehicles.
- service temperature range: -40 °C to +120 °C
- high resistance of the lubricating film even at increased
temperatures
- excellent water resistance
- very good flowability at low temperatures
- good wearing protection
- easily biodegradable

Container terminal from Rhenania

Intermodal in Mannheim (P&O Trans
European Management GmbH,
D-Mannheim)

23
4.0
4.0
Medical Devices

Oils:

TURMO®DENT H1 plus
- fully synthetic Used for the maintenance and lubrication of high-speed
- colour: colourless/transparent bearings in dental turbines and drill heads. It is not attacked by
- service temperature range: -20 °C to +140 °C water or disinfecting alcohol.
- good compatibility with elastomers

Greases:

ELASTOLUB® mv - line
- fully synthetic Lubrication of sealing elements to improve the sliding ability and
- colour: whitish/transparent to reduce abrasion. Lubricating and sealing pastes for glass
- service temperature range: -50 °C to +250 °C cocks in laboratories. Sliding agents for low temperatures,
- resistant to steam, water and media prevent the seals from sticking and freezing on. Behaviour
- non-toxic towards solvents and chemicals following DIN 51807, in detail
upon request.
TURMOLUB® MA 2
- fully synthetic As assembly lubricant it prevents the formation of fretting
- colour: yellowish/beige corrosion and facilitates unscrewing. Special grease for extreme
- service temperature range: -35 °C to +170 °C conditions. In addition, it is outstanding for the lubrication of the
- resistant to steam, water and media swivelling rollers of hospital beds.
- good adhesive properties, non-contaminating
- resistant to disinfectants
- good wearing protection

K 11 Manual piece (KaVo Elektrotechnisches Werk, D-Leutkirch)

24
 5.0 5.0
Valves and Fittings

Water fittings - Oil lubrication:

Physiologically recognised as safe, inodorous and tasteless lubricating oils which meet the requirements of § 5 of the German food act
(LMBG) and the FDA 21 CFR 178.3570. As NSF registered H1-products their contact with foodstuff is admissible.

TURMSILON® K 6000
- fully synthetic Highly viscous silicon oil for the lubrication of cold and hot water
- colour: colourless/transparent fittings, corresponds to the regulary of WRc and WRAS.
- service temperature range: -50 °C to +250 °C
- good adhesive properties

Water fittings - Grease lubrication:

Physiologically recognised as safe, inodorous and tasteless lubricating greases which meet the requirements of § 5 of the German food
act (LMBG) and the FDA 21 CFR 178.3570. As NSF registered H1-products their contact with foodstuff is admissible.

TURMOGREASE® GA 280
- fully synthetic Has especially been designed for the lubrication of single-lever
- colour: light brown mixers and double tap fittings.
- service temperature range: -20 °C to +160 °C
- resistant to cold and hot water as well as to steam
- adhesive
- neutral towards elastomers (NBR, EPDM etc.)

TURMSILON® GL 320
- fully synthetic Suitable for the lubrication of cold and hot water fittings, ceramic
- colour: light beige cartridges, O-rings and single-lever mixers. Approved by KIWA,
- service temperature range: -50 °C to +120 °C KTW, WRc and WRAS.
- resistant to cold and hot water as well as to steam
- resistant to disinfectants
- neutral towards elastomers (NBR, EPDM etc.),
except for silicon caoutchouc

TURMSILON® GTI 6001

- fully synthetic Suitable for the lubrication of elastomers and ceramic disks in
- colour: white cold and hot water fittings.
- service temperature range: -40 °C to +250 °C
- very adhesive
- resistant to cold and hot water as well as to steam
- resistant to disinfectants
- neutral towards elastomers (NBR, EPDM etc.),
except for silicon caoutchouc

WRT-test machine for fittings (archive)

25
5.0
5.0
Valves and Fittings

Gas fittings - Greases:

TURMOGREASE® NAK 500 MF

- mineral Grease for the lubrication and sealing of gas cocks. Fitting
- colour: grey/black grease for natural and town gas, propane and butane gas. It is
- service temperature range: 0 °C to +100 °C resistant to all gases used in a household. DIN lubricant
- heavy, fibrous, no gumming designation: DIN 3536-0-100 G.
- resistant to acids, alkalis and oxidation

TURMOGREASE® SEB 3
- fully synthetic Special grease to solve special lubrication problems in gas
- colour: light brown fittings, e. g. in building installations, in gas distributing mains and
- service temperature range: -20 °C to +120 °C gas pipelines, in rolling and sliding bearings exposed to extreme
- extremely adhesive, resistant to acids and alkali service conditions, as lubricating and sealing grease providing
- resistant to liquid propane/butane, extreme resistance to volatile hydrocarbon fuels as well as to car
chlorinated solvents petrol and other hydrocarbons with a low boiling point. It is
approved by the DVGW according to DIN 3536-20-120.
TURMOGREASE® GHM 200 plus
- mineral Grease for the lubrication and optimisation of the sealing effect
- colour: dark brown of gas cocks. Also suitable as fitting grease for natural and town
- service temperature range: 0 °C to +160 °C gas, propane and butane gas. The lubricating grease was tested
- heavy, fibrous, no gumming and certified by the DVGW research division at the Engler-Bunte
- resistant to gas and oxidation Institute of the University of Karlsruhe. DIN lubricant designati-
on: DIN EN 377, temperature classification E (0 to +160 °C).

Oxygen fittings - Sliding agents:

TURMOXYGEN® LCO 29
- fully synthetic, absolutely non-toxic Sliding agent for oxygen fittings in the autogen technology,
- colour: white oxygen lances in the steel processing, oxygen devices in
- service temperature range: -60 °C to +260 °C medical areas and for diving stations as well as in rolling and
- pressure impact limit up to 290 bar/60 °C sliding bearings. Tested and approved by the BAM (German
institute for material testing), Berlin.
TURMOXYGEN® - line
- fully synthetic, absolutely non-toxic
- colour: white/grey
- service temperature range: -50 °C to +240 °C
- pressure impact limit up to 270 bar/60 °C
- not miscible with synthetic lubricants

TURMOTEMP® II/400 OX Safety oxygen sliding agent for the lubrication of fittings, sealing
- fully synthetic, incombustible elements, slideways and packages in contact with oxygen, e. g.
- colour: white oxygen devices, diving stations and diving equipment as well as
- service temperature range: -40 °C to +200 °C in rolling and sliding bearings. All points of application have to be
- pressure impact limit up to 110 bar/60 °C cleaned before use by means of a special detergent. The
- compatible with elastomers and all metals complete lubricating effect is only achieved on clean, fat-free
and dry materials. Tested and approved by the BAM (German
TURMOTEMP® M 802 institute for material testing), Berlin.
- fully synthetic, incombustible
- colour: white
- service temperature range: -60 °C to +220 °C
- pressure impact limit up to 150 bar/60 °C
- high chemical stability and resistance to oxidation
- low evaporation losses, low pourpoint
- compatible with elastomers and all metals

Switch-over board
(ROTAREX S.A., L-7505 Lintgen)

26
 6.0 6.1.
Aviation and Space Flight

Oils:
ULTRATHERMOIL VG - line
- fully synthetic Outstanding suitability for the lubrication of gears, rolling and
- colour: clear/transparent sliding bearings in vacuum pumps up to 10-9 mbar.
- service temperature range: -60 °C to +300 °C
- good viscosity-temperature behaviour
- resistant to pressure, vacuum and radiation
- chemically stable, non inflammable

TURMOFLUID® TTO 12 + TTO 24

- partly synthetic Special hydraulic oils for applications at extremely varying
- colour: light-coloured/transparent temperatures or very low temperatures.
- service temperature range: -50 °C to +100 °C
- excellent viscosity-temperature behaviour

Take-off of Ariane carrier rocket (ESA HQ, Paris Cedex)

27
6.0
6.1.
Aviation and Space Flight

Greases:
THERMOPLEX TTF 122
- fully synthetic Suitable for the lubrication of rolling and sliding bearings in the
- colour: olive-green aircraft construction. Particularly suitable for the use at extreme-
- service temperature range: -70 °C to +150 °C ly varying temperatures.

TURMOGREASE® Li AzR
- fully synthetic Semifluid for the lubrication of control gears in landing flaps of
- colour: beige the Airbus fleet. Meets the requirements according to ZFB 831.
- service temperature range: -55 °C to +120 °C Approved by Liebherr Aerospace.
- excellent corrosion and wearing protection

TURMOPAST® TAS - WT 000 CRY

- mineral Special grease containing solid lubricants for highly loaded
- colour: grey/black sliding surfaces. Excellent high pressure and anticorrosion
- service temperature range: -30 °C to +120 °C properties.
- good adhesive properties
- metal affinity

ULTRATHERM 2000
- fully synthetic Has proved successful over many years in the lubrication of
- colour: white rolling and sliding bearings as well as of seals in the ultra
- service temperature range: -60 °C to +280 °C vacuum range up to 10-9 mbar.
- chemically stable and pressure resistant
- non-toxic and non-combustible
- resistant to oxidation

Sprays:

TURMOLYB® MDC
- colour: grey/black MoS2-containing dry bonded coating for the lubrication of
- service temperature range: -180 °C to +450 °C sealing rings, threads and sliding surfaces at low and high
- pressure resistant temperatures.
- extremely adhesive

TURMOPAST® TF
- colour: white PTFE dry bonded coating for the lubrication of sealing rings,
- service temperature range: -180 °C to +260 °C threads and sliding surfaces at low and high temperatures.
- pressure resistant
- extremely adhesive

Landing flap actuator system on the long-haul Airbus A 330/A 340

28
 6.0 6.2.
Road and Rail Engineering

Oils:

Optimum wearing protection and high lubricating film resistance ensure a reliable application in the rail lubrication (guiding surfaces,
running edges, switches, switch tongues). According to the criteria of the OECD, they are classified as easily degradable, they provide a
very good water resistance and protect against corrosion.

TERRASOL W - line
- fully synthetic Universal oils for the ecofriendly lubrication of rails, curves,
- service temperature range: -30 °C to +120 °C switches as well as of machines and devices used in ground
- good viscosity-temperature behaviour water preservation areas. They contain additives which provide
- no gumming good lubricating properties and, furthermore, improve the low
- resistant to oxidation temperature behaviour, i. e. they depress the pourpoint.
- easily biodegradable

SINTONO® TERRA Super

- fully synthetic Special product for the lubrication of running edges and guiding
- colour: greenish surfaces. With small quantities of lubricant it is possible to
- service temperature range: -40 °C to +140 °C reduce or eliminate surface damage, such as slight ondulations,
- medium-viscous, fibrous pittings, etc. by chemical abrasive wear. This modern method
- excellent wearing protection leads to a fairly good surface quality. Beginning cracks can be
removed this way.

Revolve stand (archive)

ICE wheel bearing (FAG, D-Schweinfurt)

29
6.0
6.2.
Road and Rail Engineering

Greases:

SINTONO® TERRA HL - line

- fully synthetic Special lubricants for the lubrication of guiding surfaces
- colour: silver providing good water resistance.
- service temperature range: -40 °C to +140 °C

SINTONO® TERRA SK - line

- fully synthetic Applicable for the lubrication of running edges and wheel
- colour: yellowish/transparent flanges.
- service temperature range: -40 °C to +120 °C
- excellent water resistance
- very good flowability at low temperatures
- optimum wearing protection
- easily biodegradable

SINTONO® TERRA W - line

- fully synthetic They can be used as multipurpose grease/switch lubricants
- colour: yellowish/transparent through-out the whole year. Lubricating greases which are
- service temperature range: -40 °C to +120 °C regarded as easily degradable according to the criteria of the
- excellent water resistance OECD-Guideline for Testing of Chemicals 301 C.
- very good flowability at low temperatures
- optimum wearing protection
- easily biodegradable

TERRAGLISS WZ
- fully synthetic Special product for the lubrication of switch tongues. Hardly
- colour: beige binds any dirt or dust.
- service temperature range: -40 °C to +130 °C

Quickly Biodegradable Special Grease

SINTONO TERRA SK
®

Degrading Behaviour Biodegradability of Lubricants

Micro-organisms such as bacteria, moulds or alga cause the Test: CEC-L-33-T-82
biological degradation of organic substances by transforming 100
them. The transformation eventually results, besides water and
90
CO2, in inorganic compounds innocuous to nature.
80
Biodegradability (%)

70
Classification acc. to CEC-L-33-T-82 60

50
Degradability: > 70% = biologically quickly degradable
after 21 days 20 - 70% = biologically potentially degradable 40
< 20% = hard-degradable 30

Test Method 20
CEC-L-33-T-82 10

150 ml of mineral nutritive solution with approx. 7.5 mg of test 0

7 14 21
substance (lubricant) are prepared with 1 ml of inoculum Duration of Test (days)
(bacteria culture from sewage plants). The degradation of the SINTONO® TERRA SK White oil
test substance caused by the bacteria cultures is observed over
21 days.

Long-Term Application
The LUBCON Bio-lubricants can be used for long-term and and/or soil. Working with biologically quickly degradable
lifetime lubrication without reservations, although they are products requires the same care as it is appropriate with
quickly biodegradable. The biological degradation only starts standard lubricating greases. Each avoidable contamination
when the lubricant penetrates in small quantities into water contributes to preserve the environment.

30
 6.0 6.3.
Vehicle Industry

Greases:
THERMOPLEX 2 HPL
- fully synthetic High-speed grease with low start-up friction suitable for high
- colour: beige mechanical loads in the lubrication of belt tighteners.
- service temperature range: -40 °C to +180 °C

THERMOPLEX 2 TML Special

- fully synthetic Low-temperature high-speed grease with low coefficients of
- colour: yellow friction and low start-up friction for the lifetime lubrication of
- service temperature range: -60 °C to +140 °C starters.

TURMOGREASE® N 502
- fully synthetic High and low temperature grease with excellent lubricating
- colour: yellowish properties. High-speed grease for the lubrication of generators.
- service temperature range: -50 °C to +180 °C
- good resistance to media

TURMOGREASE® N 7501 K
- fully synthetic Very adhesive special grease providing excellent compatibility
- colour: light beige with elastomers for the lubrication of seat sliding rails in car
- service temperature range: -40 °C to +160 °C seats.
- excellent resistance to media

TURMO®GEL HVS 161

- fully synthetic Special lubricant for height adjustment mechanisms in cars.
- colour: brown
- service temperature range: -40 °C to +120 °C
- good corrosion and wearing protection
- biodegradable

TURMOGREASE® RVS
- fully synthetic Special grease for the long-term and lifetime lubrication of seat
- colour: beige rails and backrest adjustment mechanisms.
- service temperature range: -50 °C to +140 °C
- resistant to wear

TURMOGREASE® SKL 18
- fully synthetic Smooth operation grease with low coefficients of friction even at
- colour: light beige high speeds for electric window winders.
- service temperature range: -50 °C to +130 °C
- good wearing protection

TURMO®SYNTHGREASE GL 320
- partly synthetic Ideal lubricant with good sliding properties for different material
- colour: yellowish combinations and specially for the lubrication of sun visors.
- service temperature range: -15 °C to +120 °C
- low moment of friction
- biodegradable

TURMOTEMP® II/400 dl fluid

- fully synthetic Lubricant dispersion for the lubrication of exterior mirror
- colour: white adjusters.
- service temperature range: -45 °C to +180 °C
- excellent resistance to oxidation
- outstanding wearing protection

TURMOTEMP® LM 182
- fully synthetic Special grease with good smooth operating properties for
- colour: light beige special applications in stepper motors.
- service temperature range: -50 °C to +150 °C
- good compatibility with elastomers

31
7.0
7.0.
Sprays for Different Applications

TURMOFLUID® ED 13
- colour: clear/transparent An universal oil for all repair works. Rust-in or tight hinges or
- service temperature range: -45 °C to +150 °C guides are released and work smoothly. Suitable for the
- silicon-free, thin-bodied lubrication of machines, machine parts and chains in the
- high creeping capacity measuring and control technique, in the construction of
- prevents squealing noise machines and tools as well as in the foodstuff and plastics.
- good corrosion protection

TURMOFLUID® 40 B
- fully synthetic Due to very good creeping properties and EP additives to
- colour: yellowish reduce wear, it is particularly well suitable for the lubrication of
- service temperature range: -30 °C to >+250 °C chains.
- good viscosity-temperature behavior, low evaporation loss
- high load carrying capacity, silicon-free, does not polymerise
- resistant to oxidation, good wearing protection

TURMOFLUID® 300 OM
- fully synthetic Adhesive spray for outdoor chains and cables, oil-tight cou-
- colour: green/transparent plings (curved teeth), non-contaminating, therefore suitable for
- service temperature range: -5 °C to +240 °C open drives, residue-free high-temperature lubrication.
- good creeping properties, stays supple in the cold, adhesive
- silencing, high load carrying capacity

TURMOLYB® PSP
- colour: grey/black Easily applicable paste spray for all assembly works. Suitable
- service temperature range: -40 °C to +450 °C for the lubrication of sliding bearings, threaded spindles,
- containing MoS2 guideways, tensioning elements, wedge connections, toothed
- low coefficient of friction wheels and racks, bolts and screwed connections.

TURMOLYB® MDC
- colour: grey/black MoS2-containing dry bonded coating for the lubrication of friction
- service temperature range: -180 °C to +450 °C and slide faces in a dusty or aggressive environment. Suitable
- pressure resistant for silicon seals in sterilizers, resistant to vacuum, radiation and
- extremely adhesive extreme temperatures.

TURMOLYB® WG
- colour: white High-temperature bonded coating with good separating
- service temperature range: +5 °C to +800 °C properties up to +1000 °C. Also suitable as sealing material and
- water resistance especially for the chain lubrication of annealing furnaces,
- high thermal stability burning and drying kilns and as a universal, non-adherent
separating and sliding agent.
RAPID GT
- colour: black Purest graphite spray for the treatment of sealing faces and the
- service temperature range: -18 °C to +450 °C lubrication of sliding surfaces in dusty surroundings or when
- high water resistant exposed to much water.

RAPID GÖ
- colour: grey/black Graphite oil as a lubricant for all industrial branches and
- service temperature range: -30 °C to +150 °C applications.

GRIZZLYGREASE® No. 1
- colour: dark brown Suitable for a vast range of applications at high temperatures
- service temperature range: -30 °C to +150 °C combined with extreme loads. To be used for ball and roller
- heat resistant bearings as well as for sliding bearings, liners and open gear
- good wearing protection drives.

KORROQUICK
- colour: brownish/clear Excellently suitable as moisture repellent, quick rust dissolver,
- excellent creeping properties, very adhesive cleaning fluid and lubricant for all industrial branches and
- high corrosion protection applications.

PROFIOIL - Spray
- partly synthetic Lubricating and cutting agent for the metal working industry, it
- good creeping properties increases tool-life. Chain oil for all industrial branches, protects
- optimum wetting properties all points to be lubricated in the trades, do-it-yourself sector and
- good protection against corrosion and wear household.

32
 Certificates

33
Certificates

32
Die Welt der LUBCON®-Schmierstoffe The World of the LUBCON® Lubricants

EUROPE EUROPE EUROPE

AUSTRIA NORWAY Weitere Vertretungen/Further distributors
LUBCON AUSTRIA NORIKO AS Bulgaria Greece
Büro Linz Kilengt 20 Cyprus Russia
Pollheimer Str. 16 N-3117 Tönsberg
A-4020 Linz Tel.: +47-33-37 85 00
Tel.: +43-7-3 26 71 63 0 Fax: +47-33-37 85 01 NORTH AMERICA
Fax: +43-7-3 26 71 63 0 e.Mail: [email protected] UNITED STATES OF AMERICA
e.Mail: [email protected] Internet: www.noriko.no LUBCON TURMO® LUBRICATION, Inc.
Internet: www.lubcon.com 4665 Broadmoor SE, Suite 150
Grand Rapids, Michigan 49512
POLAND Tel.: +1-616-554-7930
BELGIUM LUBCON POLSKA Sp. z o.o. Fax: +1-616-554-7936
Van Meeuwen Special Lubricants N.V. ul. Piasecka 162 Tel.: US + CAN 877-887-6658
Parklaan 25 PL-21-040 Świdnik e.Mail: [email protected]
B-9300 Aalst Tel.: +48-81-7 21 68 30 Internet: www.lubconusa.com
Tel.: +32-53-76 76 00 Fax: +48-81-7 21 68 31
Fax: +32-53-21 52 03 e.Mail: [email protected]
e.Mail: [email protected] Internet: www.lubcon.com Weitere Vertretung/Further distributor
Internet: www.vanmeeuwen.be Mexico

SLOVENIJA
CZECH REPUBLIC LUBCON d.o.o. SOUTH AMERICA
LUBCON s.r.o. Adamičeva ulica 26 BRAZIL
Dlouhá 783 SLO-8000 Novo mesto TRIBOTÉCNICA
CZ-76321 Slavicín Tel.: +386-7-33 80 760 Lubrificantes Sintéticos Ltda.
Tel.: +420-577-34 36 18 Fax: +386-7-33 80 763 Rua Arthur Alves Bandeira,
Fax: +420-577-34 20 09 e.Mail: [email protected] 200-Jardim Margarida
e.Mail: [email protected] Internet: www.lubcon.com CEP 06730 000-V Gde Pta-SP-Brasil
Internet: www.lubcon.com Tel.: +55-11-4158-17 00
Fax: +55-11-4158-38 13
SPAIN e.Mail: [email protected]
DENMARK LUBRITEC, S.A. Internet: www.tribotec.com.br
A.H. INTERNATIONAL A/S Centre Industrial Santiga
Vranderupvej 156 Tallers 8, Nave 58
DK-6000 Kolding E-08210 Barberà del Vallès (Barcelona) AFRICA
Tel.: +45-75-50 11 00 Tel.: +34-93-719 11 13 SOUTH AFRICA, REPUBLIC of
Fax: +45-75-50 20 21 Fax: +34-93-719 12 57 VIRITH CONVERTING MACHINERY cc
e.Mail: [email protected] e.Mail: [email protected] 16 Korannaberg Road,
Internet: www.lubcon.dk Internet: www.lubriservis.com Glenvista EXT 5
P.O. Box 617, Glenvista,
Gauteng RSA 2058
FINLAND Tel.: +27-11-432 12 33
Jukka Majuri Oy SWITZERLAND
Fax: +27-11-432 12 11
Poikkikatu 15 LUBCON Lubricant Consult AG
e.Mail: [email protected]
FIN-38200 Vammala Im Leisibühl 35
Tel.: +358-3-515 41 26 CH-8044 Zürich
Fax: +358-3-511 52 20 Tel.: +41-44-8 82 30 37
Weitere Vertretungen/Further distributors
e.Mail: [email protected] Fax: +41-44-8 82 30 38
Egypt Tunesia
Internet: www.lubcon.fi e.Mail: [email protected]
Internet: www.lubcon.com
ASIA/PACIFIC
FRANCE Wir sind vertreten in/We are represented in
LUBCON FRANCE S.A.R.L. SWEDEN Australia New Zealand
Parc d'activités Alpespace TRIBOSCAND AB Bangladesh Pakistan
161, Voie JF Champollion - Francin Box 12131 China/Hong Kong Philippines
F-73800 Montmélian S-102 24 Stockholm India Saudi Arabia
Tel.: +33-4-79 84 38 60 Tel.: +46-8-37 35 01 Indonesia Singapore
Fax: +33-4-79 84 38 61 Fax: +46-8-44 10 80 3 Iran Taiwan
e.Mail: [email protected] e.Mail: [email protected] Japan Thailand
Internet: www.lubcon.com Korea United Arabian Emirates
Malaysia Vietnam
THE NETHERLANDS
GREAT BRITAIN Van Meeuwen Smeertechniek B.V. e.Mail: [email protected]
LUBCON Lubricants UK Ltd. Korte Muiderweg 2 A
Unit 2, Wilmot Hall, NL-1382 LR Weesp
Golden Butts Road Tel.: +31-294-49 44 94
Ilkley, West Yorkshire LS 29 8HS Fax: +31-294-49 44 90
Tel.: +44-1943-60 14 31 e.Mail: [email protected]
Fax: +44-1943-60 26 45 Internet: www.vanmeeuwen.nl
e.Mail: [email protected]
Internet: www.lubcon.com
TURKEY
GEOCON Ltd. Şti.
ITALY Yeni Çamlica Mahallesi
LUBCON ITALIA S.R.L. YEDPA Ticaret Merkezi
Via Trieste, 16 B Caddesi No. 21-22
I-21040 Sumirago (VA) TR-34779 Ümraniye - İstanbul
Tel.: +39-0331-90 97 90 Tel.: +90-216-4 71 04 62
Fax: +39-0331-90 70 84 Fax: +90-216-4 71 03 23
e.Mail: [email protected] e.Mail: [email protected]
Internet: www.lubcon.it Internet: www.geocon.com.tr

LUBRICANT CONSULT GMBH

Schmierstoffe . Schmiertechnik . Lubricants . Lubrication Engineering
Gutenbergstraße 13 . D-63477 Maintal . Postfach 200 240 . D-63469 Maintal (Germany)
01.08.05

Tel. +49-61 09 - 76 50-0 . Fax +49-61 09 - 76 50-51

e.Mail: [email protected] . www.lubcon.com