Scribd
Upload
5 views2 pages

QuesBank3

The document is a question bank for the Control System subject for the IV semester at Jnanavikas Institute of Technology, covering topics such as stability, characteristic equations, and root locus techniques. It includes various questions related to BIBO stability, Routh-Hurwitz criterion, and the analysis of different control system equations. The document is intended for students to prepare for their examinations in the Electronics & Communication Engineering department.

Uploaded by

bunamratha5
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
5 views2 pages

QuesBank3

The document is a question bank for the Control System subject for the IV semester at Jnanavikas Institute of Technology, covering topics such as stability, characteristic equations, and root locus techniques. It includes various questions related to BIBO stability, Routh-Hurwitz criterion, and the analysis of different control system equations. The document is intended for students to prepare for their examinations in the Electronics & Communication Engineering department.

Uploaded by

bunamratha5
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

JNANAVIKAS INSTITUTE OF TECHNOLOGY

(Approved by AICTE New Delhi, Govt. of Karnataka Affiliated to VTU Belagavi)


Off -Bengaluru - Mysuru Highway, Bidadi, Ramangaram

DEPARTMENT OF ELECTRONICS & COMMUNICATION ENGINEERING

Subject: Control System Semester: IV Sub.Code: BEC403

Question Bank - 03

1. Explain the terms absolute stability and conditional stability.


2. Define BIBO stability and marginal stability of control system.
3. What are the necessary conditions to have all the roots of a characteristic equation in the left
half of s-plane?
4. An open loop transfer function has poles at S=0, S=-1 and a zero at S=-2. Check the range
of K for the stability of the closed loop system.
5. Determine the number of roots that are (i)in the left half of s-plane,(ii)on the imaginary axis
and (iii)in the right half of S-plane for the system with the characteristic equation:
S5 − S4 − 2S3 + 2S2 − 8S + 8 = 0
6. Ascertain the stability of the system of the following characteristic equation:
LC
S5 + S4 + 2S3 + 2S2 + 3S + 5 = 0.

7. Determine the stability of the following cases: which represents the characteristic equation
of different systems: S4 + 5S3 + 20S2 + 40S + 50 = 0 ; S3 + S2 + 2S + 24 = 0
r.Y

8. Determine the range of K such that feedback system having characteristic equation: S(S2 +
S + 1)(S + 4) + K = 0 will be stable?
9. A unity feedback control system is desired by the characteristic equation
S6 + 2S5 + 8S4 + 12S3 + 20S2 + 16S + 6 = 0. Test its stability and find the frequency of
D

oscillations.
10. Using the Routh-Hurwitz criterion and the unity negative feedback system of a closed Loop
system
K(S + 4)
G(s) = . Find the following:
S(S + 1)(S + 2)
i) The range of K that keeps the system stable,
ii) The value of K that makes the system oscillates, and
iii) The frequency of oscillation, when K is set to the value that makes the system oscillate.
11. Explain the procedure to construct Root Locus?
K
12. A unity feedback system has an open loop transformation G(s) = . Draw the root
S(S + 2
locus as K varied from 0 to ∞.
13. Sketch the root locus of the system whose characteristic equation is S3 + 100S + K = 0.
Show all the steps clearly?
K
14. Sketch the complete root locus of the system having G(s) =
S(S + 1(S + 2)(S + 3)
15. Sketch the root locus for a unity feedback control system with open loop transfer function
K(S + 2)(S + 3)
G(s) =
S(S + 1)
(S + a)
16. For a unity feedback system with G(s) = , where a > b. Show that a part of the
S(S + b)
root loci is circular?
17. Sketch the root locus for a negative feedback control system given by
K(S + 2)
G(s) = 2 .
(S + 2S + 2)
K
18. Sketch the root locus for the system having G(sH(s)) = 2
.
S(S + 4S + 13)

Date: May 27, 2025

Staff Incharge
Dr.Y.L.ChandraShekar.

LC
r.Y
D

You might also like