NNH4-65A-R6H4

12-port sector antenna, 4x 698–896 and 8x 1695–2360 MHz, 65°

HPBW, 6x RET.

Features broadband Low Band (698-896 MHz) and High Band (1695-2360 MHz) arrays for 4T4R
(4X MIMO) capability for Band 14, AWS, PCS and WCS applications
Non-stacked high band array design provides higher gain and narrower vertical beamwidth than
traditional antenna designs
Independent tilt for all arrays
Array configuration provides capability for 4T4R (4x MIMO) on Low band and Dual 4T4R (4x
MIMO) on High band
Optimized SPR performance across all operating bands
Excellent wind loading characteristics
Supports re-configurable antenna sharing capability enabling control of the internal RET system
using up to two separate RET compatible OEM radios

General Specifications
Antenna Type Sector

Band Multiband

Color Light Gray (RAL 7035)

Grounding Type RF connector body grounded to reflector and mounting bracket

Performance Note Outdoor usage | Wind loading figures are validated by wind tunnel
measurements described in white paper WP-112534-EN

Radome Material Fiberglass, UV resistant

Radiator Material Aluminum | Low loss circuit board

Reflector Material Aluminum

RF Connector Interface 4.3-10 Female

RF Connector Location Bottom

RF Connector Quantity, high band 8

RF Connector Quantity, mid band 0

RF Connector Quantity, low band 4

RF Connector Quantity, total 12

Remote Electrical Tilt (RET) Information

RET Hardware CommRET v2

RET Interface 8-pin DIN Female | 8-pin DIN Male

RET Interface, quantity 2 female | 2 male

Page 1 of 6

©2025 ANDREW, an Amphenol company. All rights reserved. Amphenol and ANDREW are registered trademarks of Amphenol and/or its
affiliates in the U.S. and other countries. All product names, trademarks and registered trademarks are property of their respective owners.
Revised: March 12, 2025
NNH4-65A-R6H4
Input Voltage 10–30 Vdc

Internal RET High band (4) | Low band (2)

Power Consumption, idle state, maximum 1W

Power Consumption, normal conditions, maximum 8W

Protocol 3GPP/AISG 2.0 (Multi-RET)

Dimensions
Width 498 mm | 19.606 in

Depth 197 mm | 7.756 in

Length 1499 mm | 59.016 in

Net Weight, without mounting kit 33.5 kg | 73.855 lb

Array Layout

Port Configuration

Page 2 of 6

©2025 ANDREW, an Amphenol company. All rights reserved. Amphenol and ANDREW are registered trademarks of Amphenol and/or its
affiliates in the U.S. and other countries. All product names, trademarks and registered trademarks are property of their respective owners.
Revised: March 12, 2025
NNH4-65A-R6H4

Electrical Specifications
Impedance 50 ohm

Operating Frequency Band 1695 – 2360 MHz | 698 – 896 MHz

Polarization ±45°

Total Input Power, maximum 900 W @ 50 °C

Electrical Specifications
Frequency Band, MHz 698–806 806–896 1695–1880 1850–1990 1920–2180 2300–2360
Gain, dBi 13.2 13.7 16.1 17 17.6 18.2
Beamwidth, Horizontal, 69 66 71 67 61 57
degrees
Beamwidth, Vertical, degrees 17.1 15.4 7.5 6.9 6.4 5.7
Beam Tilt, degrees 2–16 2–16 2–12 2–12 2–12 2–12
USLS (First Lobe), dB 19 19 15 17 18 21
Front-to-Back Ratio at 180°, 32 31 33 33 34 33
dB
Isolation, Cross Polarization, 25 25 25 25 25 25
dB
Isolation, Inter-band, dB 25 25 25 25 25 25
VSWR | Return loss, dB 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0

-150 -150 -150 -150 -150 -150 Page 3 of 6

©2025 ANDREW, an Amphenol company. All rights reserved. Amphenol and ANDREW are registered trademarks of Amphenol and/or its
affiliates in the U.S. and other countries. All product names, trademarks and registered trademarks are property of their respective owners.
Revised: March 12, 2025
NNH4-65A-R6H4
PIM, 3rd Order, 2 x 20 W, dBc -150 -150 -150 -150 -150 -150
Input Power per Port at 50°C, 300 300 300 250 250 200
maximum, watts

Mechanical Specifications
Effective Projective Area (EPA), frontal 0.52 m² | 5.597 ft²

Effective Projective Area (EPA), lateral 0.17 m² | 1.83 ft²

Mechanical Tilt Range 0°–15°

Wind Loading @ Velocity, frontal 549.0 N @ 150 km/h (123.4 lbf @ 150 km/h)

Wind Loading @ Velocity, lateral 183.0 N @ 150 km/h (41.1 lbf @ 150 km/h)

Wind Loading @ Velocity, maximum 712.0 N @ 150 km/h (160.1 lbf @ 150 km/h)

Wind Loading @ Velocity, rear 452.0 N @ 150 km/h (101.6 lbf @ 150 km/h)

Wind Speed, maximum 241 km/h (150 mph)

Packaging and Weights

Width, packed 608 mm | 23.937 in

Depth, packed 352 mm | 13.858 in

Length, packed 1682 mm | 66.221 in

Weight, gross 43.8 kg | 96.562 lb

Regulatory Compliance/Certifications
Agency Classification
CHINA-ROHS Above maximum concentration value
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
ROHS Compliant/Exempted
UK-ROHS Compliant/Exempted

Included Products
BSAMNT-2F – Mounting bracket for cylindrical pipe installations (60-115mm pipe diameter) for fix mechanical
tilt applications.

* Footnotes
Performance Note Severe environmental conditions may degrade optimum performance

Page 4 of 6

©2025 ANDREW, an Amphenol company. All rights reserved. Amphenol and ANDREW are registered trademarks of Amphenol and/or its
affiliates in the U.S. and other countries. All product names, trademarks and registered trademarks are property of their respective owners.
Revised: March 12, 2025
BSAMNT-2F

Mounting bracket for cylindrical pipe installations (60-115mm pipe

diameter) for fix mechanical tilt applications.

Product Classification
Product Type Fixed tilt mounting kit

General Specifications
Application Outdoor

Color Silver

Dimensions
Compatible Diameter, maximum 115 mm | 4.528 in

Compatible Diameter, minimum 60 mm | 2.362 in

Weight, net 3.8 kg | 8.378 lb

Material Specifications
Material Type Galvanized steel

Packaging and Weights

Included Brackets | Hardware

Packaging quantity 1

Weight, gross 4 kg | 8.818 lb

Regulatory Compliance/Certifications
Agency Classification
CE Compliant with the relevant CE product directives
CHINA-ROHS Below maximum concentration value
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
REACH-SVHC Compliant as per SVHC revision on www.andrew.com/ProductCompliance
ROHS Compliant
UK-ROHS Compliant

Page 5 of 6

©2025 ANDREW, an Amphenol company. All rights reserved. Amphenol and ANDREW are registered trademarks of Amphenol and/or its
affiliates in the U.S. and other countries. All product names, trademarks and registered trademarks are property of their respective owners.
Revised: March 12, 2025
BSAMNT-2F

Page 6 of 6

©2025 ANDREW, an Amphenol company. All rights reserved. Amphenol and ANDREW are registered trademarks of Amphenol and/or its
affiliates in the U.S. and other countries. All product names, trademarks and registered trademarks are property of their respective owners.
Revised: March 12, 2025