User Guide OI/FEF/FEV/FEW–EN Rev.

F, V, W Series
Electromagnetic flowmeter
Full-bore flow sensors

The perfect fit for all water

industry applications

Introduction
ABB’s full-bore FEF, FEV and FEW electromagnetic This User Guide should be used in conjunction with the
flowmeter sensors are available with either an following publications:
AquaMaster 3 or a WaterMaster transmitter. – AquaMaster 3 FET200 electromagnetic flowmeter
AquaMaster 3 and WaterMaster are a range of high transmitter User Guide (OI/FET200–EN)
performance electromagnetic flowmeters for the – WaterMaster FET100 electromagnetic flowmeter
measurement of electrically conductive fluids and are transmitter User Guide (OI/FET100–EN)
supplied as factory-configured and calibrated systems.
– WaterMaster FET100 electromagnetic flowmeter /
This User Guide provides end-user details for installation transmitter Hazardous areas ATEX / IECEx areas 2,
and connection. 21 and 22 User Guide (OI/FET100/ATEX–EN)
The Company
We are an established world force in the design and manufacture of instrumentation for industrial process control,
flow measurement, gas and liquid analysis and environmental applications.
As a part of ABB, a world leader in process automation technology, we offer customers application expertise, service
and support worldwide.
We are committed to teamwork, high quality manufacturing, advanced technology and unrivalled service and
support.
The quality, accuracy and performance of the Company’s products result from over 100 years experience, combined
with a continuous program of innovative design and development to incorporate the latest technology.

Quality Control
The UKAS Calibration Laboratory No. 0255 is just one of the ten flow calibration plants operated by the Company
and is indicative of our dedication to quality and accuracy.

0255
UKAS Calibration Laboratory No. 0255
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors

1 Safety ............................................................................................................................................... 2
1.1 Electrical Safety ............................................................................................................................................. 2
1.2 Symbols ........................................................................................................................................................ 2
1.3 Health & Safety ............................................................................................................................................. 3

2 Mechanical Installation .................................................................................................................... 4

2.1 Unpacking .................................................................................................................................................... 4
2.2 Installation Conditions ................................................................................................................................... 4

3 Electrical Installation ..................................................................................................................... 10

3.1 Grounding ................................................................................................................................................... 10
3.2 Cable Preparation (Remote Transmitter Only) .............................................................................................. 15
3.2.1 Sensor Cable Connections (Remote WaterMaster Transmitter Only) ............................................. 15
3.2.2 Sensor Cable Connections (Remote AquaMaster 3 Transmitter Only) ........................................... 16
3.3 Environmental Protection ............................................................................................................................ 17

4 Specification .................................................................................................................................. 18

5 Sensor dimensions ........................................................................................................................ 25

5.1 FEW – DN10 to 125 (3/8 to 5 in. NB) .......................................................................................................... 25
5.2 FEW – DN150 to 400 (6 to 16 in. NB) .......................................................................................................... 28
5.3 FEW – DN450 to 2400 (18 to 96 in. NB) ...................................................................................................... 30
5.4 FEV – DN40 to 200 (11/2 to 8 in. NB) .......................................................................................................... 36
5.5 FEF – DN250 to 600 (10 to 24 in. NB) ......................................................................................................... 38

6 Common accessories .................................................................................................................... 41

OI/FEF/FEV/FEW–EN Rev. E 1
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 1 Safety

1 Safety
Information in this manual is intended only to assist our customers in the efficient operation of our
equipment. Use of this manual for any other purpose is specifically prohibited and its contents are not to be
reproduced in full or part without prior approval of the Technical Publications Department.

1.1 Electrical Safety

This equipment complies with the requirements of CEI/IEC 61010-1:2001-2 'Safety Requirements for
Electrical Equipment for Measurement, Control and Laboratory Use' and complies with NIST and OSHA.
If the equipment is used in a manner NOT specified by the Company, the protection provided by the
equipment may be impaired.

1.2 Symbols
One or more of the following symbols may appear on the equipment labelling:

Warning – Refer to the manual for

Direct current supply only
instructions

Caution – Risk of electric shock Alternating current supply only

Protective earth (ground) terminal Both direct and alternating current supply

The equipment is protected

Earth (ground) terminal
through double insulation

2 OI/FEF/FEV/FEW–EN Rev. E
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 1 Safety

1.3 Health & Safety

Health and Safety

To ensure that our products are safe and without risk to health, the following points must be noted:
 The safety requirements of this equipment, any associated equipment and the local
environment must be taken into consideration during installation.
 Install and use this equipment and any associated equipment in accordance with the relevant
national and local standards.
 The relevant sections of these instructions must be read carefully before proceeding.
 Warning labels on containers and packages must be observed.
 Installation, operation, maintenance and servicing must only be carried out by suitably trained
personnel and in accordance with the information given.
 Normal safety precautions must be taken to avoid the possibility of an accident occurring when
operating in conditions of high pressure and / or temperature.
 Chemicals must be stored away from heat, protected from temperature extremes and powders
kept dry. Normal safe handling procedures must be used.
 When disposing of chemicals ensure that no two chemicals are mixed.
 Product liability – advice and assistance provided without charge is given in good faith but
without liability.

Safety advice concerning the use of the equipment described in this manual or any relevant hazard
data sheets (where applicable) may be obtained from the Company address on the back cover,
together with servicing and spares information.

Warning.
 System configuration must be carried out only by users or personnel with approved access rights
(user privileges).
 Read all relevant sections of this guide before configuring the system or modifying system
parameters.
 Install and use associated equipment in accordance with the relevant national and local
standards.

OI/FEF/FEV/FEW–EN Rev. E 3
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 2 Mechanical Installation

2 Mechanical Installation
2.1 Unpacking

Fig. 2.1 Unpacking

Caution.
 Inspect the flowmeter for damage before installation. Do NOT install a damaged or faulty
flowmeter.
 When lifting the flowmeter, use the lifting hooks provided or sling under the body of the meter.
NEVER lift the flowmeter by the sensor cable terminal connection box – this will damage the
terminal connection box and invalidate the warranty.

2.2 Installation Conditions

Caution. Do NOT exceed the maximum working pressure marked on the flowmeter.

Fig. 2.2 Spillage

Caution. Do NOT install the flowmeter in an area where a spillage of any substance could damage the
flowmeter.

4 OI/FEF/FEV/FEW–EN Rev. E
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 2 Mechanical Installation

Fig. 2.3 Vibration

Caution. Do NOT install the flowmeter in a pipeline that may exert excessive movement and twisting
forces on the flowmeter, for example, vibration.

Fig. 2.4 Localized Heat

Caution. Do NOT subject the flowmeter to localized heat during installation. Remember – the flowmeter
is a measuring instrument.

Allow room to read display

or data plate

Fig. 2.5 Siting

Note. When installing an integral flowmeter, allow enough room to read the transmitter's display and
data label.

OI/FEF/FEV/FEW–EN Rev. E 5
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 2 Mechanical Installation

70 / 130 °C
(158 / 266 °F)
Max.
– 20 °C
(– 4 °F)
Min.

Fig. 2.6 Within Temperature Limits

Caution. Ensure the flowmeter is operated within its specified temperature limits. Use flange seals
made from a material that is compatible with the fluid and fluid temperatures as required.

5 x Pipe Diameters >2 Pipe Diameters

Min. Min.

Flow Direction

Fig. 2.7 Straight Pipe Requirements

Note. Ensure the flow direction in the pipeline corresponds to the identification plate. The flowmeter
measures the flowrate in both directions. Forward flow is the factory setting. Experience has shown that,
in most installations, a straight upstream section 3 x pipe diameters in length and a straight downstream
section 2 x pipe diameters in length are sufficient. However, wherever possible, straight upstream and
downstream sections 5 x 2 pipe diameters in length are recommended.

Fig. 2.8 Fluid Level

Note. For accurate and reliable operation, install the flowmeter sensor in a position where it will be
completely full when in operation. The flowmeter will operate when not full, but indicated readings will not
be accurate.

6 OI/FEF/FEV/FEW–EN Rev. E
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 2 Mechanical Installation

Supports

Fig. 2.9 Above Ground

Caution. Do NOT install the flowmeter in a manner that will subject it to mechanical tension (torsion,
bending). If required, support the pipeline. Remember – the flowmeter is a measuring instrument.

Fig. 2.10 Temperature Difference

Caution. Do NOT install the flowmeter in a position that will expose it to direct sunlight. Provide
appropriate sun protection if required.

Sensor Submersion: Continuous

IP68 (NEMA 6)

Fig. 2.11 Within Environmental Rating

Caution. Ensure the level of IP rating is correct for the required meter installation application. IP68
(NEMA 6) rated meters can be continuously submerged.

OI/FEF/FEV/FEW–EN Rev. E 7
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 2 Mechanical Installation

Backfill Protection Plate

Recommended

Fig. 2.12 Underground

Caution. When burying a flowmeter, ensure it can be found easily if required (for example, mark the
installation position with a post). Installing a protection plate above the meter is also recommended.

Note. For further advice when burying flowmeters, contact the ABB Service Organization.

Fig. 2.13 Cable Routing

Caution. Install all flowmeter cabling neatly. Installation within a conduit is recommended. Install the
cabling or conduit with a U-bend below the terminal connection box height to prevent water ingress into
the flowmeter sensor by capillary action.

8 OI/FEF/FEV/FEW–EN Rev. E
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 2 Mechanical Installation

Fit Gaskets

Gaskets Same Size as Pipe

Fig. 2.14 Gasket Fitting

Caution. Use correctly sized gaskets. Do NOT fit gaskets that will extend into the flow area – the
turbulence caused will adversely affect flowmeter accuracy.

0.7 m (2.3 ft) Min.

Fig. 2.15 Separation of Sensors

Caution. If flowmeters are installed in adjacent pipelines, ensure they are at least 0.7 m (2.3 ft.) apart to
prevent the electromagnetic field from one meter affecting the other.

OI/FEF/FEV/FEW–EN Rev. E 9
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 3 Electrical Installation

3 Electrical Installation
3.1 Grounding
Caution. For safety reasons and optimum performance, the flowmeter, pipelines and medium must be
correctly bonded and grounded according to regulations.
Do not ground cathodically-protected pipelines to an external earth.

Note.
 The flow sensor must not be connected to a ground spike.
 For bonding connections use ³ 4mm2 (< 10AWG) cable.

Arrangement Number of Fluid Contact Rings

AquaMaster 3 Transmitter 2

WaterMaster Transmitter 1 minimum

Insulating Pipe 2

Table 3.1 Fluid Contact Rings

Fluid contact ring for lined pipes Flow Direction

Fig. 3.1 All Metal Pipe (Including Lined Metal Pipe)

10 OI/FEF/FEV/FEW–EN Rev. E
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 3 Electrical Installation

Fig. 3.2 Metal Pipe with Flange Adaptor

Metal Pipe Fluid Contact Ring Plastic Pipe

Fig. 3.3 Flanged Metal Pipe to Plastic Pipe

Metal Pipe Fluid Contact Ring Plastic Pipe

Fig. 3.4 Metal Pipe with Plastic Make-up Insert

OI/FEF/FEV/FEW–EN Rev. E 11
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 3 Electrical Installation

Fluid Contact Rings

Fig. 3.5 All-plastic Pipe

Bonding Cables (Supplied)

Fig. 3.6 Pipelines with Cathodic Protection

Caution. Do NOT ground cathodically-protected systems.

12 OI/FEF/FEV/FEW–EN Rev. E
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 3 Electrical Installation

Fig. 3.7 AquaMaster 3 Transmitter Mounted in a Chamber (Battery Version Shown)

Fig. 3.8 AquaMaster 3 Transmitter Mounted in a Cabinet (Battery Version Shown)

OI/FEF/FEV/FEW–EN Rev. E 13
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 3 Electrical Installation

Power Supply

Fig. 3.9 WaterMaster Remote Transmitter Mounted in a Roadside Cabinet

14 OI/FEF/FEV/FEW–EN Rev. E
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 3 Electrical Installation

3.2 Cable Preparation (Remote Transmitter Only)

Caution. Maintain Environmental Protection at all times – See Section 3.3, page 17.

To prepare the cable for connection at the transmitter and sensor terminal blocks:
1. Remove the outer cable insulation and Mylar® wrap.
2. Ensure the drain wire is sleeved.
3. Cut the cable connection wires to the lengths shown.

3.2.1 Sensor Cable Connections (Remote WaterMaster Transmitter Only)

Caution.
 Make connections only as shown.
 Twist the screen wire of D1 / TFE + D2 with the outer screen drain wire and sleeve them green /
yellow.
 Ensure the seal and mating surfaces are clean to maintain environmental rating.
 Conduit connections must provide cable entry sealing.
 Ensure cable glands are tightened after wiring. Do not overtighten the plastic cable glands to
avoid destroying their sealing properties. Initially, tighten finger-tight, then a further 1/2 to 3/4 turn
using a suitable spanner or wrench.

S1 Violet (Screen)
E1 Violet (*Signal)
E2 Blue (*Signal)
S2 Blue (Screen)
3 Green (Sleeve) Cut cables to
D2 Yellow 60 mm (2.35 in)
D1/TFE Orange
PE (Screen)
M2 Red

Screen to M1 Brown
Internal Earth
for NPT Variants **Drain Wire (Twisted with Screen Wire
from D1/TFE – Orange and D2 – Yellow)
for M20 Versions connect to PE
*Inner Wire
**For Cathodically Protected Systems connect the drain wire to terminal PE.

Fig. 3.10 Sensor Cable Connections – WaterMaster Transmitter

OI/FEF/FEV/FEW–EN Rev. E 15
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 3 Electrical Installation

3.2.2 Sensor Cable Connections (Remote AquaMaster 3 Transmitter Only)

Caution.
 Twist the three screen wires together and sleeve them.
 Keep cable pairs twisted.
 Make connections only as shown.
 Maintain Environmental Protection at all times.
 Conduit connections must provide cable entry sealing.

Drain / Screen Wire for M20 Gland

7 Violet
6 Blue

5 Green
Cut cables to
4 Yellow
60 mm (2.35 in)
3 Orange

2 Red

Drain / Screen 1 Brown

to Internal Earth
for NPT Gland

Fig. 3.11 Sensor Cable Connections – AquaMaster 3 Transmitter

16 OI/FEF/FEV/FEW–EN Rev. E
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 3 Electrical Installation

3.3 Environmental Protection

Fig. 3.12 Potting the Sensor Terminal Box

Warning.
 Potting materials are toxic. Read the manufacturers' instructions carefully before preparing the
potting material and use suitable safety precautions.
 Power up and check all connections before potting.
 The remote sensor terminal box connections must be potted immediately on completion to
prevent the ingress of moisture.
 Do not overfill or allow the potting material to come into contact with 'O' rings or grooves.
 Do not let potting material enter conduit (if used).

OI/FEF/FEV/FEW–EN Rev. E 17
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 4 Specification

4 Specification
WaterMaster optimized full-bore meter / full-bore meters flow performance (m3/h)
Standard Calibration – 0.4 % Class 2 High Accuracy Calibration – 0.2 % Class 1
DN Q4 Q3 Q0.4% Q2 Q1 Q0.2% Q2 Q1
10 3.1 2.5 0.167 0.013 0.008 0.31 0.02 0.012
15 7.88 6.3 0.42 0.032 0.02 0.79 0.05 0.03
20 12.5 10 0.67 0.05 0.032 1.25 0.08 0.05
25 20 16 1.1 0.08 0.05 2 0.13 0.08
32 31.25 25 1.67 0.13 0.08 3 0.20 0.13
40* 50 40 4.2 0.2 0.13 6 0.32 0.2
50* 79 63 4.2 0.32 0.20 7.9 0.5 0.32
65* 125 100 6.7 0.5 0.32 12.5 0.8 0.5
80* 200 160 10.7 0.81 0.51 16 1.3 0.8
100* 313 250 16.7 1.3 0.79 25 2 1.25
125* 313 250 16.7 1.3 0.79 25 2 1.25
150* 788 630 42 3.2 2.0 63 5 3.2
200* 1,250 1,000 67 5.1 3.2 100 8 5
250 2,000 1,600 107 8.1 5.1 160 13 8
300 3,125 2,500 167 12.7 7.9 250 20 12.5
350 5,000 4,000 267 20.3 12.7 400 32 20
400 5,000 4,000 267 20.3 12.7 400 32 20
450 7,875 6,300 420 32 20 630 50 32
500 7,875 6,300 420 32 20 630 50 32
600 12,500 10,000 667 51 32 1000 80 50
700 20,000 16,000 1600 102 64 1600 160 100
750 20,000 16,000 1600 102 64 1600 160 100
30 in (760) 20,000 16,000 1600 102 64 1600 160 100
800 20,000 16,000 1600 102 64 1600 160 100
900 31,250 25,000 2500 160 100 2500 250 156
1000 31,250 25,000 2500 160 100 2500 250 156
42 in 31,250 25,000 2500 160 100 2500 250 156
1100 31,250 25,000 2500 160 100 2500 250 156
1200 50,000 40,000 4000 256 160 4000 400 250
1350 78,750 63,000 6300 403 252 6300 630 394
1400 78,750 63,000 6300 403 252 6300 630 394
1500 78,750 63,000 6300 403 252 6300 630 394
60 in (1500) 78,750 63,000 6300 403 252 6300 630 394
1600 78,750 63,000 6300 403 252 6300 630 394
1650 78,750 63,000 6300 403 252 6300 630 394
1800 125,000 100,000 10000 640 400 10000 1000 625
1950 125,000 100,000 10000 640 400 10000 1000 625
2000 125,000 100,000 10000 640 400 10000 1000 625
2200 200,000 160,000 16000 1024 640 16000 1600 1000
2400 200,000 160,000 16000 1024 640 16000 1600 1000
* OIML R49 Certificate of Conformance to Class 1 and Class 2, with OIML R49 and MID versions available.

Note. OIML R49–1 allows Class 1 only for meters with Q3 ³ 100 m3/h. Meters outside this range have been tested and
conform to Class 1.

18 OI/FEF/FEV/FEW–EN Rev. E
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 4 Specification

WaterMaster optimized full-bore meter / full-bore meters flow performance (GPM)

Standard Calibration 0.4 % Class 2 High Accuracy Calibration 0.2 % Class
1
NPS/NB Q4 Q3 Q0.4% Q2 Q1 Q0.2% Q2 Q1
(DN)
3
/8 (10) 13.8 11 0.73 0.06 0.035 1.38 0.09 0.053
1
/2 (15) 34.7 27.7 1.85 0.14 0.09 3.48 0.22 0.14
3
/4 (20) 55 44 2.94 0.22 0.14 5.5 0.35 0.22
1 (25) 88 70.4 4.7 0.35 0.22 8.8 0.57 0.35
1 1/4 (32) 137.6 110 7.3 0.57 0.35 13.2 0.88 0.57
1 1/2 (40) 220 176 18.5 0.89 0.56 26.4 1.41 0.88
2 (50) 347 277 18.5 1.41 0.88 34.7 2.22 1.39
2 1/2 (65) 550 440 29.4 2.24 1.40 55.0 3.52 2.20
3 (80) 881 704 47.0 3.58 2.24 70.4 5.64 3.52
4 (100) 1,376 1,101 73.4 5.59 3.49 110 8.81 5.50
5 (125) 1,376 1,101 73.4 5.59 3.49 110 8.81 5.50
6 (150) 3,467 2,774 185 14.1 8.81 277 22.2 13.9
8 (200) 5,504 4,403 294 22.4 14.0 440 35.2 22.0
10 (250) 8,806 7,045 470 35.8 22.4 704 56.4 35.2
12 (300) 13,759 11,007 734 55.9 34.9 1,101 88.1 55.0
14 (350) 22,014 17,611 1,174 89.5 55.9 1,761 141 88.1
16 (400) 22,014 17,611 1,174 89.5 55.9 1,761 141 88.1
18 (450) 34,673 27,738 1,849 141 88.1 2,774 222 139
20 (500) 34,673 27,738 1,849 141 88.1 2,774 222 139
24 (600) 55,036 44,029 2,935 224 140 4,403 352 220
27/28* (700) 88,057 70,446 7,045 451 282 7,045 704 440
29 (750) 88,057 70,446 7,045 451 282 7,045 704 440
30 (760) 88,057 70,446 7,045 451 282 7,045 704 440
32 (800) 88,057 70,446 7,045 451 282 7,045 704 440
36 (900) 137,590 110,072 11,007 704 440 11,007 1,100 688
39/40* (1000) 137,590 110,072 11,007 704 440 11,007 1,100 688
42 (1050) 137,590 110,072 11,007 704 440 11,007 1,100 688
44 (1100) 137,590 110,072 11,007 704 440 11,007 1,100 688
48 (1200) 220,143 176,115 17,611 1,127 704 17,611 1,761 1,101
52 (1350) 346,726 277,381 27,738 1,775 1,110 27,738 2,773 1,733
54 (1400) 346,726 277,381 27,738 1,775 1,110 27,738 2,773 1,733
60 (1500) 346,726 277,381 27,738 1,775 1,110 27,738 2,773 1,733
66 (1600) 346,726 277,381 27,738 1,775 1,110 27,738 2,773 1,733
68 (1650) 346,726 277,381 27,738 1,775 1,110 27,738 2,773 1,733
77 (1800) 550,358 440,287 44,029 2,818 1,761 44,029 4,403 2,752
77 (1950) 550,358 440,287 44,029 2,818 1,761 44,029 4,403 2,752
78 (2000) 550,358 440,287 44,029 2,818 1,761 44,029 4,403 2,752
78 (2000) 550,358 440,287 44,029 2,818 1,761 44,029 4,403 2,752
84 (2200) 880,573 704,459 70,446 4,509 2,818 70,446 7,045 4,403
96 (2400) 880,573 704,459 70,446 4,509 2,818 70,446 7,045 4,403
*Size is dependent on flange specification

OI/FEF/FEV/FEW–EN Rev. E 19
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 4 Specification

AquaMaster 3 FEV2, FEF2 AC-powered Full-bore Sensors – Flow Performance

Class 2 specification Class 1 specification

Size Q4 Q3 Q(0.5%) Q2 Q1 Q2 Q1
m3 / h m3 / h m3 / h m3 / h m3 / h R m3 / h m3 / h R
mm in.
(GPM) (GPM) (GPM) (GPM) (GPM) (GPM) (GPM)
50 40 4 0.20 0.13 0.32 0.20
40 11/2 315 200
(220) (176) (18) (0.88) (0.57) (1.40) (0.88)
79 63 6.3 0.32 0.20 0.50 0.32
50 2 315 200
(247) (277) (28) (1.41) (0.88) (2.20) (1.41)
125 100 10 0.50 0.32 0.80 0.50
65 21/2 315 200
(550) (440) (44) (2.20) (1.41) (3.52) (2.20)
200 160 16 0.81 0.51 1.30 0.8
80 3 315 200
(880) (700) (70) (3.56) (2.24) (5.72) (3.52)
313 250 25 1.3 0.79 2.00 1.25
100 4 315 200
(1377) (1100) (110) (5.72) (3.47) (8.80) (5.5)
313 250 25 1.3 0.79 2.00 1.25
125 5 315 200
(1377) (1100) (110) (5.72) (3.47) (8.80) (5.5)
788 630 63 3.2 2.00 5.00 3.2
150 6 315 200
(3470) (2770) (277) (14.08) (8.80) (22.00) (14.08)
1250 1000 100 5.1 3.2 8.0 5.0
200 8 315 200
(5500) (4400) (440) (22.44) (14.08) (35.20) (22.00)
2000 1600 160 8.1 5.1 13.0 8.0
250 10 315 200
(8800) (7040) (700) (35.64) (22.44) (57.20) (35.20)
250 12.7 7.9 20.0 12.5
300 12 3125 (13750) 2500 (11007) 315 200
(1100) (55.88) (34.76) (88.00) (55.00)
400 20.3 12.7 32.0 20.0
350 14 5000 (22000) 4000 (17610) 315 200
(1760) (89.32) (55.88) (14.08) (88.00)
400 20.3 12.7 32.0 20.0
400 16 5000 (22000) 4000 (17610) 315 200
(1760) (89.32) (55.88) (14.08) (88.00)
630 32.0 20.0 50.0 32.0
450 18 7875 (34760) 6300 (27740) 315 200
(2770) (140.8) (88.00) (220.00) (140.8)
630 32.0 20.0 50.0 32.0
500 20 7875 (34650) 6300 (27740) 315 200
(2770) (140.8) (88.00) (220.00) (140.8)
1000 51.0 32.0 80.0 50.0
600 24 12500 (55000) 10000 (44000) 315 200
(4400) (224.4) (140.8) (352.0) (220.0)

20 OI/FEF/FEV/FEW–EN Rev. E
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 4 Specification

AquaMaster 3 FEV2, FEF2 Battery / Renewable Energy Full-bore Sensors –

Flow Performance
Class 2 specification Class 1 specification

Size Q4 Q3 Q(0.25%) Q2 Q1 Q2 Q1
m3 / h m3 / h m3 / h m3 / h m3 / h R m3 / h m3 / h R
mm in.
(GPM) (GPM) (GPM) (GPM) (GPM) (GPM) (GPM)
50 40 2.7 0.4 0.25 0.64 0.4
40 11/2 160 100
(220) (176) (11.8) (1.8) (1.1) (2.8) (1.8)
79 63 4.2 0.63 0.39 1.0 0.63
50 2 160 100
(247) (277) (18.5) (2.8) (1.71) (4.4) (2.8)
125 100 6.7 1.0 0.6 1.6 1.0
65 21/2 160 100
(550) (440) (29.5) (4.4) (1.41) (7.0) (4.4)
200 160 10.7 1.6 1.0 2.6 1.6
80 3 160 100
(880) (700) (47.0) (7.0) (4.4) (11.4) (7.0)
313 250 16.7 2.5 1.6 4.0 2.5
100 4 160 100
(1377) (1100) (73.5) (11.0) (7.0) (17.6) (11.0)
313 250 16.7 2.5 1.6 4.0 2.5
125 5 160 100
(1377) (1100) (73.5) (11.0) (7.0) (17.6) (11.0)
788 630 42.0 6.3 3.9 10.0 6.3
150 6 160 100
(3470) (2770) (184.8) (27.7) (17.1) (44.0) (27.7)
1250 1000 67.0 10.0 6.0 16.0 10.0
200 8 160 100
(5500) (4400) (294.8) (44.0) (26.4) (70.0) (44.0)
2000 1600 107.0 16.0 10.0 26.0 16.0
250 10 160 100
(8800) (7040) (470.8) (70.0) (44.0) (110.4) (70.0)
167.0 25.0 15.6 40.0 25.0
300 12 3125 (13750) 2500 (11007) 160 100
(734.8) (110.0) (68.6) (176.0) (110.0)
267.0 40.0 25.0 64.0 40.0
350 14 5000 (22000) 4000 (17610) 160 100
(1174.8) (176.0) (110.0) (281.6) (176.0)
267.0 40.0 25.0 64.0 40.0
400 16 5000 (22000) 4000 (17610) 160 100
(1174.8) (176.0) (110.0) (281.6) (176.0)
420.0 63.0 39.0 101.0 63.0
450 18 7875 (34760) 6300 (27740) 160 100
(184.8) (277.0) (171.6) (444.4) (277.0)
420.0 63.0 39.0 101.0 63.0
500 20 7875 (34650) 6300 (27740) 160 100
(184.8) (277.0) (171.6) (444.4) (277.0)
667.0 100.0 63.0 160.0 100.0
600 24 12500 (55000) 10000 (44000) 160 100
(2934.8) (440.0) (277.0) (704.0) (440.0)

OI/FEF/FEV/FEW–EN Rev. E 21
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 4 Specification

Functional Specification
Pressure limitations
As per flange rating – non approved
PN16 for OIML R49, MID Approved
Pressure equipment directive 97/23/EC
This product is applicable in networks for the supply, distribution and discharge of water and associated equipment and
is therefore exempt.
Temperature limitations

Ambient temperature
Remote transmitter –20 to 70 °C (–4 to 158 °F)
Integral transmitter –20 to 60 °C (–4 to 140 °F)

Process temperature See table below.

0.1 to 50 °C (32.2 to 122 °F) – OIML R49 T50 Approved

Medium temperature
°C (°F)
Code Lining Flange material Minimum Maximum
Carbon steel –10 (14) 90 (194)
FEF, FEW3 Hard rubber
Stainless steel –10 (14) 90 (194)
Carbon steel –10 (14) 130 (266)
FEW1 PTFE
Stainless steel –25 (–13) 130 (266)
Carbon steel –10 (14) 130 (266)
FEW3 PTFE
Stainless steel –10 (14) 130 (266)
Carbon steel –5 (23) 80 (176)
FEW3 Elastomer
Stainless steel –5 (23) 80 (176)
FEF Elastomer –6 (21) 70 (158)
Carbon steel
FEV Polypropylene –6 (21) 70 (158)

IP rating
IP68 (NEMA 6) to 7 m (20 ft.) depth
Note. Not sizes DN10 to DN32 (3/8 – 11/4 in. NB)
IP67 (NEMA 4X) – DN10 to DN32 (3/8 – 11/4 in. NB)
Buriable (sensor only)
FEV, FEF and FEW – DN450 to 2400 (18 to 96 in. NB) to 5 m (16 ft.) depth
Conductivity
>5µS cm–1
Transmitter mounting
Integral (not FEF) or remote
Electrical connections
20 mm glands
1
/2 in. NPT
20 mm armored glands
Sensor cable
ABB WaterMaster cable available in two forms – standard and armored
Maximum length 200 m (660 ft.)

22 OI/FEF/FEV/FEW–EN Rev. E
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 4 Specification

Physical Specification
Wetted parts
Electrode material
Stainless steel 316 L / 316 Ti
Super-austenitic steel
Hastelloy® C-22 and Hastelloy C4
(other electrode materials available on request)
Potential equalizing rings
Minimum of 1 recommended
Lining material / potable water approvals

Potable Water Approvals

Code Size Range Liner WRAS WRAS 60°C ACS DVGW NSF AZ/NZS4020
DN10 – 32
FEW1 3 PTFE 4
( /8 – 11/4 in. NB)
DN10 – 600
FEW3 PTFE
(3/8 – 24 in. NB)
DN40 – 2400
FEW3 Elastomer 4 4
(11/2 – 96 in. NB)
DN40 – 2400 NSF approved
FEW3 Hard rubber 4 4 4
(11/2 – 96 in. NB) material
DN40 – 200
FEV Polypropylene 4 4 4 NSF-61 4
(11/2 – 8 in. NB)
DN250 – 600
FEF Elastomer 4 4 4 NSF-61 4
(10 – 24 in. NB)
DN250 – 600 NSF approved
FEF Hard rubber 4 4 4
(10 – 24 in. NB) material
*Size is dependent on flange specification

Lining protection plates

Not required
Installation conditions (recommended)

Straight pipe requirements

Upstream Downstream
FEW / FEF 5 x DN 2 x DN
FEV 5 x DN 0 x DN

Pressure loss

Negligible at Q3 All full bore meters

<0.25 bar (<3.62 psi) at Q3 FEV (DN40 to 200 [11/2 to 8 in. NB])

OI/FEF/FEV/FEW–EN Rev. E 23
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 4 Specification

Non-wetted parts
Flange material

Carbon steel DN20 to DN2400 (3/4 to 96 in. NB)

Stainless steel DN10 to DN2400 (3/8 to 96 in. NB)
SG iron FEV – DN40 to DN150 [1 1/2 to 6 in. NB)

Housing material

Carbon steel FEV – DN40 to 200 (11/2 to 8 in. NB)

FEW – DN450 to 2400 (18 to 96 in. NB)
Plastic FEF – DN250 to 600 (10 to 24 in. NB)
Aluminium FEW – DN10 to 400 (3/8 to 16 in. NB)

Terminal box material

Polycarbonate
Cable gland material
Plastic, brass
Paint specification
Paint coat 70 µm thick RAL 9002 (light grey)

DS/WM–EN Rev. T

24 OI/FEF/FEV/FEW–EN Rev. E
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 5 Sensor dimensions

5 Sensor dimensions
5.1 FEW – DN10 to 125 (3/8 to 5 in. NB)

Dimensions in mm (in.)
77.8 104.5 98
(3.06) (4.11) (3.86)

Ø104
89 (4.1)
(3.5)
(7.91)
210

(3.1)
78
G E F

D
C

A
L

Fig. 5.1 DN10 to 125 (3/8 to 5 In. NB) (FEW)

Dimensions in mm (in.) Approx. weight in kg (lb)

DN Mating flange type D L F C E G A Integral Remote

DN10 JIS10K 90 (3.54) 200 (7.87) 268 (10.55) 82 (3.23) 193 (7.6) 148 (5.83) 113 (4.45) 6 (13) 4 (9)
(3/8 in.)
PN10 to 40 90 (3.54)

ASME B16.5 CL150 90 (3.54)

ASME B16.5 CL300 96 (3.78)

DN15 PN10 to 40 95 (3.74)

(1/2 in.)
JIS5K 80 (3.15)

JIS10K 95 (3.74)

ASME B16.5 CL300 95 (3.74)

ASME B16.5 CL150 90 (3.54)

DN20 PN10 to 40 105 (4.13) 8 (18) 6 (13)

(3/4 in.)
JIS5K 85 (3.35)

JIS10K 100 (3.94)

ASME B16.5 CL300 115 (4.53)

ASME B16.5 CL150 98 (3.86)

Table 5.1 DN10 to 125 (3/8 to 5 in. NB) (FEW) dimensions / weights

OI/FEF/FEV/FEW–EN Rev. E 25
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 5 Sensor dimensions

Dimensions in mm (in.) Approx. weight in kg (lb)

DN Mating flange type D L F C E G A Integral Remote

DN25 PN10 to 40 115 (4.53) 200 (7.87) 268 (10.55) 82 (3.23) 193 (7.6) 148 (5.83) 113 (4.45) 9 (20) 7 (15)
(1 in.)
JIS5K 95 (3.74)

JIS10K 125 (4.88)

ASME B16.5 CL300 125 (4.88)

ASME B16.5 CL150 108 (4.25)

DN32 PN10 to 40 140 (5.51) 275 (10.83) 92 (3.62) 200 (7.87) 155 (6.10) 113 (4.45) 10 (22) 8 (18)
(11/4 in.)
JIS5K 115 (4.53)

JIS10K 135 (5.31)

ASME B16.5 CL300 135 (5.31)

ASME B16.5 CL150 117 (4.61)

DN40 PN10 to 40 150 (5.91) 11 (24) 9 (20)

(11/2 in.)
JIS5K 120 (4.72)

JIS10K 140 (5.51)

ASME B16.5 CL300 155 (6.10)

ASME B16.5 CL150 127 (5.00)

DN50 PN10 to 40 165 (6.5) 281 (11.06) 97 (3.82) 206 (8.11) 161 (6.34) 115 (4.53) 12 (26) 10 (22)
(2 in.)
JIS5K 130 (5.12)

JIS10K 155 (6.10)

AS4087 PN16 150 (5.91)

AS4087 PN35 165 (6.50)

ASME B16.5 CL150 152 (5.98)

ASME B16.5 CL300 165 (6.50)

DN65 PN10 to 40 185 (7.28) 292 (11.50) 108 (4.25) 217 (8.54) 172 (6.77) 104 (4.09) 13 (29) 11 (24)
(21/2 in.)
JIS5K 155 (6.10)

JIS10K 175 (6.89)

AS4087 PN16 165 (6.50)

AS4087 PN35 185 (7.28)

ASME B16.5 CL150 178 (7.01)

ASME B16.5 CL300 190 (7.48) 15 (33) 13 (29)

DN80 PN10 to 40 200 (7.87) 292 (11.5) 108 (4.25) 217 (8.54) 172 (6.77) 104 (4.09) 17 (37) 15 (33)
(3 in.)
JIS5K 180 (7.09)

JIS10K 185 (7.28)

AS4087 PN16 185 (7.28)

AS4087 PN35 205 (8.07)

ASME B16.5 CL150 190 (7.48)

ASME B16.5 CL300 210 (8.28) 19 (42) 17 (37)

Table 5.1 DN10 to 125 (3/8 to 5 in. NB) (FEW) dimensions / weights (Continued)

26 OI/FEF/FEV/FEW–EN Rev. E
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 5 Sensor dimensions

Dimensions in mm (in.) Approx. weight in kg (lb)

DN Mating flange type D L F C E G A Integral Remote

DN100 PN10 to 16 220 (8.66) 250 (9.84) 314 (12.36) 122 (4.8) 239 (9.41) 194 (7.64) 125 (4.92) 19 (42) 17 (37)
(4 in.)
PN25 to 40 235 (9.25) 23 (51) 21 (46)

JIS5K 200 (7.87) 19 (42) 17 (37)

JIS10K 210 (8.27)

AS4087 PN16 215 (8.46)

AS4087 PN35 230 (9.06) 23 (51) 21 (46)

ASME B16.5 CL300 255 (1.04) 30 (66) 28 (62)

ASME B16.5 CL150 229 (9.00) 21 (51) 19 (42)

DN125 PN10 to 16 250 (9.84) 324 (12.76) 130 (5.12) 249 (9.8) 204 (8.03) 125 (4.92) 22 (48) 20 (44)
(5 in.)
PN25 to 40 270 (10.63) 29 (64) 27 (59)

JIS5K 235 (9.25) 22 (48) 20 (44)

JIS10K 250 (9.84)

ASME B16.5 CL150 254 (10.00)

ASME B16.5 CL300 280 (11.02) 35 (77) 33 (73)

Table 5.1 DN10 to 125 (3/8 to 5 in. NB) (FEW) dimensions / weights (Continued)

OI/FEF/FEV/FEW–EN Rev. E 27
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 5 Sensor dimensions

5.2 FEW – DN150 to 400 (6 to 16 in. NB)

Dimensions in mm (in.)

104.5 98 77.8
(4.11) (3.86) (3.06)

Ø104 89
(4.1) (3.5)

(7.91)
201
(3.1)
78

E F
G

Fig. 5.2 DN150 to 400 (6 to 16 in. NB) (FEW)

Dimensions in mm (in.) Approx. weight in kg (lb)

DN Mating flange type D L F C E G A Integral Remote

DN150 PN10 to 16 285 (11.22) 300 (11.81) 371 (14.61) 146 (9.88) 296 (11.65) 251 (9.88) 166 (6.54) 33 (73) 31 (68)
(6 in.)
PN25 to 40 300 (11.81) 39 (86) 37 (81)

JIS5K 265 (10.43) 33 (73) 31 (68)

JIS10K 280 (11.02)

AS4087 PN16 280 (11.02)

AS4087 PN35 305 (11.81) 39 (86) 37 (81)

ASME B16.5 CL300 320 (12.60) 47 (103) 45 (99)

ASME B16.5 CL150 279 (10.98) 33 (73) 31 (68)

DN200 PN10 340 (13.39) 350 (13.78) 411 (16.18) 170 (6.69) 336 (13.23) 291 (11.46) 200 (7.87) 41 (90) 39 (86)
(8 in.)
PN16 340 (13.39)

PN25 360 (14.17) 55 (121) 53 (117)

PN40 375 (14.76) 65 (143) 63 (139)

AS4087 PN16 335 (13.19) 41 (90) 39 (86)

AS4087 PN35 370 (14.57) 65 (143) 63 (139)

JIS5K 320 (12.60) 41 (90) 39 (86)

JIS10K 330 (12.99)

ASME B16.5 CL300 380 (14.96) 72 (158) 70 (154)

ASME B16.5 CL150 345 (13.58) 50 (110) 48 (106)

Table 5.2 DN150 to 400 (6 to 5 in. NB) (FEW) dimensions / weights

28 OI/FEF/FEV/FEW–EN Rev. E
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 5 Sensor dimensions

Dimensions in mm (in.) Approx. weight in kg (lb)

DN Mating flange type D L F C E G A Integral Remote

DN250 PN10 395 (15.55) 450 (17.72) 426 (16.77) 198 (7.80) 351 (13.82) 306 (12.05) 235 (9.62) 61 (134) 59 (130)
(10 in.)
PN16 405 (15.94) 65 (143) 63 (139)

PN25 425 (16.73) 84 (185) 82 (180)

PN40 450 (17.72) 95 (209) 93 (205)

AS4087 PN16 405 (15.94) 65 (143) 63 (139)

AS4087 PN35 430 (16.93) 95 (209) 93 (205)

JIS5K 385 (15.16) 65 (143) 63 (139)

JIS10K 400 (15.75)

ASME B16.5 CL300 445 (17.52) 105 (231) 103 (227)

ASME B16.5 CL150 405 (15.94) 70 (154) 68 (150)

DN300 PN10 445 (17.52) 500 (19.69) 449 (17.68) 228 (8.98) 374 (14.72) 329 (12.95) 272 (10.71) 74 (163) 72 (158)
(12 in.)
PN16 460 (18.11) 80 (176) 78 (172)

PN25 485 (19.09) 100 (220) 98 (216)

JIS5K 430 (16.93) 80 (176) 78 (172)

JIS10K 445 (17.52)

AS4087 PN16 455 (17.91)

AS4087 PN35 490 (19.29) 130 (286) 128 (282)

ASME B16.5 CL300 520 (20.47) 150 (330) 148 (326)

ASME B16.5 CL150 485 (19.09) 105 (231) 103 (227)

PN40 515 (20.28) 600 (23.62) 130 (286) 128 (282)

DN350 PN10 505 (19.88) 550 (21.65) 464 (18.27) 265 (10.43) 389 (15.31) 344 (13.54) 322 (12.68) 95 (209) 93 (205)
(14 in.)
PN16 520 (20.47) 110 (242) 108 (238)

PN25 555 (21.85) 145 (319) 143 (315)

JIS5K 480 (18.90) 95 (209) 93 (205)

JIS10K 490 (19.29)

AS4087 PN16 525 (20.67) 130 (286) 128 (282)

AS4087 PN35 550 (21.65) 185 (407) 183 (403)

ASME B16.5 CL300 585 (23.03) 140 (308) 138 (304)

ASME B16.5 CL150 535 (21.06) 105 (231) 103 (227)

PN40 580 (22.83) 650 (25.59) 195 (429) 193 (425)

DN400 PN10 565 (22.24) 600 (23.62) 506 (19.92) 265 (10.43) 431 (16.97) 386 (15.20) 322 (12.68) 103 (227) 101 (222)
(16 in.)
PN16 580 (22.83) 126 (277) 124 (273)

PN25 620 (24.41) 170 (374) 168 (370)

JIS5K 540 (21.26) 103 (227) 101 (223)

JIS10K 560 (22.05) 116 (255) 114 (251)

AS4087 PN16 580 (22.83) 154 (339) 152 (335)

AS4087 PN35 610 (24.02) 302 (664) 300 (660)

ASME B16.5 CL300 650 (25.59) 265 (583) 263 (578)

ASME B16.5 CL150 600 (23.62) 175 (385) 173 (381)

PN40 660 (25.98) 650 (25.59) 258 (568) 256 (564)

Table 5.2 DN150 to 400 (6 to 5 in. NB) (FEW) dimensions / weights (Continued)

OI/FEF/FEV/FEW–EN Rev. E 29
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 5 Sensor dimensions

5.3 FEW – DN450 to 2400 (18 to 96 in. NB)

Dimensions in mm (in.)

77.8 104.5 98
(3.06) (4.11) (3.86)
104
89
(4.1)
(3.5)
(7.91)
201

(3.1)
78
E F
G

A
L (1.0D)
L (1.3D)

Fig. 5.3 DN450 to 2400 (18 to 96 in. NB) (FEW)

Dimensions in mm (in.) Approx. weight in kg (lb)

DN Mating flange type D L (1.0D) L (1.3D) F C E G A Integral Remote

DN450 PN10 615 (24.21) N/A 600 514 (20.24) 310 (12.20) 439 (17.28) 394 (15.51) 328 (12.91) 173 (381) 171 (377)
(18 in.) (23.62)
PN16 640 (25.20) 188 (414) 186 (410)

JIS5K 605 (23.82) 165 (364) 163 (359)

JIS10K 620 (24.41) 177 (390) 175 (386)

AS4087 PN16 640 (25.20) 232 (511) 230 (507)

AS4087 PN35 675 (26.57) 328 (723) 326 (718)

ASME B16.5 CL300 710 (27.95) 368 (811) 366 (807)

ASME B16.5 CL150 635 (25.00) 250 (551) 248 (547)

PN25 670 (26.38) N/A 686 245 (540) 243 (536)

(27.01)
PN40 685 (26.97) 315 (694) 313 (690)

Table 5.3 DN450 to 2400 (18 to 96 in. NB) (FEW) dimensions / weights

30 OI/FEF/FEV/FEW–EN Rev. E
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 5 Sensor dimensions

Dimensions in mm (in.) Approx. weight in kg (lb)

DN Mating flange type D L (1.0D) L (1.3D) F C E G A Integral Remote

DN500 PN10 670 (26.38) N/A 600 514 (20.24) 310 (12.20) 439 (17.28) 394 (15.51) 367 (14.45) 190 (418) 188 (413)
(20 in.) (23.62)
PN16 715 (28.15) 240 (528) 238 (524)

JIS5K 655 (25.79) 190 (418) 188 (413)

JIS10K 675 (26.57)

AS4087 PN16 705 (27.76) 290 (638) 288 (634)

AS4087 PN35 735 (28.94) 435 (957) 433 (953)

ASME B16.5 CL150 700 (27.56) 300 (660) 298 (656)

ASME B16.5 CL300 775 (30.51) N/A 762 490 (1080) 488 (1076)
(30.00)

PN25 730 (28.74) N/A 700 300 (661) 298 (657)

(27.56)

PN40 755 (29.72) N/A 762 392 (864) 390 (860)

(30.00)

DN600 PN10 780 (30.71) N/A 800 565 (22.24) 361 (14.21) 490 (19.29) 445 (17.52) 469 (18.46) 284 (626) 282 (622)
(24 in.) (31.50)
PN16 840 (33.07) 318 (700) 316 (695)

PN25 845 (33.27) 460 (1012) 458 (1008)

JIS5K 770 (30.31) 275 (605) 273 (600)

JIS10K 795 (31.30) 306 (673) 304 (668)

AS4087 PN16 825 (32.48) 382 (840) 380 (835)

AS4087 PN35 850 (33.46) 452 (994) 450 (990)

ASME B16.5 CL300 915 (36.02) 550 (1210) 548 (1205)

ASME B16.5 CL150 815 (32.09) 425 (935) 423 (930)

PN40 890 (35.04) N/A 890 600 (1320) 598 (1316)

(35.04)

DN700 JIS 5K 875 (34.45) 700 910 604 (23.77) 403 (15.87) 528 (20.79) 488 (19.21) 444 (17.48) 216 (475) 214 (471)
(28 in.) (35.83)
JIS 10K 905 (35.63) (27.56) 282 (620) 280 (616)

PN6 860 (33.86) 225 (495) 223 (491)

PN10 895 (35.24) 303 (667) 301 (662)

PN16 910 (35.83) 337 (741) 335 (737)

AWWA C207 CLASS B 927 (36.50) 249 (548) 247 (543)

AWWA C207 CLASS D 927 (36.50) 280 (616) 278 (612)

AS4087 PN16 910 (35.83) 359 (790) 357 (785)

AS2129 TABLE-D 910 (35.83) 263 (579) 261 (574)

AS2129 TABLE-E 910 (35.83) 337 (741) 335 (737)

PN25 960 (37.80) 471 (10.36) 469 (1032)

PN40 995 (39.17) 586 (1289) 584 (1285)

AWWA C207 CLASS E 927 (36.50) 472 (1038) 470 (1034)

AWWA C207 CLASS F 1035 (40.75) 715 (1573) 713 (1569)

AS4087 PN35 935 (36.80) 539 (1186) 537 (1181)

ASME CL150 SERIES A 925 (36.42) 503 (1107) 501 (1102)

ASME CL150 SERIES B 835 (32.87) 323 (711) 321 (706)

ASME CL300 SERIES B 920 (36.22) 631 (1388) 629 (1384)

Table 5.3 DN450 to 2400 (18 to 96 in. NB) (FEW) dimensions / weights (Continued)

OI/FEF/FEV/FEW–EN Rev. E 31
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 5 Sensor dimensions

Dimensions in mm (in.) Approx. weight in kg (lb)

DN Mating flange type D L (1.0D) L (1.3D) F C E G A Integral Remote

DN750 JIS 5K 945 (37.20) 750 990 630 (24.79) 429 (16.89) 554 (21.81) 514 (20.23) 444 (17.48) 251 (552) 249 (548)
(30 in.) (29.52) (38.98)
JIS 10K 970 (38.19) 327 (719) 325 (715)

AWWA C207 CLASS B 984 (38.74) 273 (601) 271 (596)

AWWA C207 CLASS D 984 (38.74) 344 (757) 342 (752)

AS4087 PN16 995 (39.17) 467 (1027) 465 (1023)

AS2129 TABLE-D 995 (39.17) 340 (748) 338 (744)

AS2129 TABLE-E 995 (39.17) 454 (999) 452 (994)

AWWA C207 CLASS E 984 (38.74) 496 (1091) 494 (1087)

AWWA C207 CLASS F 1092 (43.99) 790 (1738) 788 (1734)

AS4087 PN35 1015 (39.96) 663 (1459) 661 (1454)

ASME CL150 SERIES A 985 (38.78) 544 (1197) 542 (1192)

ASME CL150 SERIES B 885 (34.84) 320 (704) 318 (700)

ASME CL300 SERIES B 990 (38.98) 748 (1646) 746 (1641)

DN800 JIS 5K 995 (39.17) 800 1040 654 (25.74) 453 (17.83) 578 (22.76) 538 (21.18) 542 (21.34) 280 (616) 278 (612)
(32 in.) (40.04)
JIS 10K 1020 (40.16) (31.49) 364 (801) 362 (796)

PN6 975 (38.39) 294 (647) 292 (642)

PN10 1015 (39.96) 406 (893) 404 (889)

PN16 1025 (40.35) 469 (1032) 467 (1027)

AWWA C207 CLASS B 1060 (41.73) 328 (722) 326 (717)

AWWA C207 CLASS D 1060 (41.73) 408 (898) 406 (893)

AS4087 PN16 1060 (41.73) 530 (1166) 528 (1162)

AS2129 TABLE-D 1060 (41.73) 386 (849) 384 (845)

AS2129 TABLE-E 1060 (41.73) 519 (1142) 517 (1137)

PN25 1085 (42.72) 615 (1353) 613 (1349)

PN40 1140 (44.88) 866 (1905) 864 (1901)

AWWA C207 CLASS E 1060 (41.73) 634 (1395) 632 (1390)

AWWA C207 CLASS F 1150 (45.28) 897 (1973) 895 (1969)

AS4087 PN35 1060 (41.73) 751 (1652) 749 (1648)

ASME CL150 SERIES A 1060 (41.73) 700 (1540) 698 (1536)

ASME CL150 SERIES B 940 (37.01) 406 (893) 404 (889)

ASME CL300 SERIES B 1055 (41.54) 933 (2053) 931 (2048

Table 5.3 DN450 to 2400 (18 to 96 in. NB) (FEW) dimensions / weights (Continued)

32 OI/FEF/FEV/FEW–EN Rev. E
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 5 Sensor dimensions

Dimensions in mm (in.) Approx. weight in kg (lb)

DN Mating flange type D L (1.0D) L (1.3D) F C E G A Integral Remote

DN900 JIS 5K 1095 (43.11) 900 1170 705 (27.7() 504 (19.84) 629 (24.76) 589 (23.19) 570 (22.44) 369 812) 367 (807)
(36 in.) (46.06)
JIS 10K 1120 (44.09) (35.43) 445 (979) 443 (975)

PN6 1075 (42.32) 390 (858) 388 (854)

PN10 1115 (43.90) 502 (1104) 500 (1100)

PN16 1125 (44.29) 589 (1296) 587 (1291)

AWWA C207 CLASS B 1168 (45.98) 417 (917) 415 (913)

AWWA C207 CLASS D 1168 (45.98) 493 (1085) 491 (1080)

AWWA C207 CLASS E 1168 (45.98) 827 (1819) 825 (1815)

AWWA C207 CLASS F 1270 (50.00) 1150 (2530) 1148 (2526)

AS4087 PN16 1175 (46.26) 706 (1553) 704 (1549)

AS2129 TABLE-D 1175 (46.26) 514 (1131) 512 (1126)

AS2129 TABLE-E 1175 (46.26) 694 (1527) 692 (1522)

PN25 1185 (46.65) 819 (1802) 817 (1797)

PN40 1250 (49.21) 1158 (2548) 1156 (2543)

AS4087 PN35 1185 (46.65) 1044 (2297) 1042 (2292)

ASME CL150 SERIES A 1170 (46.06) 961 (2114) 959 (2110)

ASME CL150 SERIES B 1055 (41.54) 595 (1309) 593 (1305)

ASME CL300 SERIES B 1170 (46.06) 1147 (2523) 1145 (2519)

DN1000 JIS 5K 1195 (47.05) 1000 1300 755 (29.71) 554 (21.81) 679 (26.73) 639 (25.16) 624 (24.57) 441 (970) 439 (966)
(40 in.) (39.37) (51.18)
JIS 10K 1235 (48.62) 572 (1258) 570 (1254)

PN6 1175 (46.26) 466 (1025) 464 (1021)

PN10 1230 (48.43) 674 (1483) 672 (1478)

PN16 1255 (49.41) 879 (1934) 877 (1929)

AWWA C207 CLASS B 1289 (50.75) 503 (1107) 501 (1102)

AWWA C207 CLASS D 1289 (50.75) 659 (1450) 657 (1445)

AWWA C207 CLASS E 1289 (50.75) 1028 (2262) 1026 (2257)

AWWA C207 CLASS F 1378 (54.25) 1367 (3007) 1365 (3003)

AS4087 PN16 1255 (49.41) 831 (1828) 829 (1824)

AS2129 TABLE-D 1255 (49.41) 610 (1342) 608 (1338)

AS2129 TABLE-E 1255 (49.41) 833 (1833) 831 (1028)

PN25 1320 (51.97) 1207 (2655) 1205 (2651)

PN40 1360 (53.54) 1413 (3109) 1411 (3104)

AS4087 PN35 1275 (50.20) 1244 (2737) 1242 (2732)

ASME CL150 SERIES A 1290 (50.79) 1149 (2528) 1147 (2523)

ASME CL300 SERIES A 1240 (48.82) 1349 (2968) 1347 (2963)

ASME CL150 SERIES B 1175 (46.26) 738 (1624) 736 (1619)

ASME CL300 SERIES B 1275 (50.20) 1487 (3271) 1485 (3267)

Table 5.3 DN450 to 2400 (18 to 96 in. NB) (FEW) dimensions / weights (Continued)

OI/FEF/FEV/FEW–EN Rev. E 33
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 5 Sensor dimensions

Dimensions in mm (in.) Approx. weight in kg (lb)

DN Mating flange type D L (1.0D) L (1.3D) F C E G A Integral Remote

DN1050 AWWA C207 CLASS B 1346 (5299) 1050 1365 808 (31.82) 608 (23.92) 733 (28.84) 693 (27.28) 624 (24.57) 564 (1241) 562 (1236)
(42 in.) (41.33) (53.74)
AWWA C207 CLASS D 1346 (5299) 669 (1472) 667 (1467)

AWWA C207 CLASS E 1346 (5299) 1143 (2515) 1141 (2510)

AWWA C207 CLASS F 1448 (57.01) 1568 (3450) 1566 (3445)

ASME CL150 SERIES B 1225 (48.23) 809 (1780) 807 (1775)

ASME CL150 SERIES A 1345 (52.95) 1289 (2836) 1287 (2831)

ASME CL300 SERIES A 1290 (50.79) 1527 (3359) 1525 (3355)

ASME CL300 SERIES B 1335 (52.56) 1704 (3749) 1702 (3744)

DN1100 JIS 5K 1305 (51.38) 1100 1430 510 (1122) 508 (1118)
(44 in.) (43.30) (56.30)
JIS 10K 1345 (52.95) 689 (1516) 687 (1511)

AWWA C207 CLASS B 1403 (55.24) 615 (1353) 613 (1349)

AWWA C207 CLASS D 1403 (55.24) 807 (1775) 805 (1771)

AWWA C207 CLASS E 1404 (55.26) 1205 (2651) 1203 (2647)

AWWA C207 CLASS F 1505 (59.25) 1719 (3782) 1717 (3777)

DN1200 JIS 5K 1420 (55.91) 1200 1560 860 (33.85) 659 (25.94) 784 (30.87) 744 (29.29) 802 (31.57) 651 (1432) 649 (1428)
(48 in.) (47.24) (61.42)
JIS 10K 1465 (57.68) 967 (2127) 965 (2123)

PN6 1405 (55.31) 710 (1562) 708 (1558)

PN10 1455 (57.28) 1107 (2435) 1105 (2431)

PN16 1485 (58.46) 1363 (2999) 1361 (2994)

AWWA C207 CLASS B 1511 (59.49) 772 (1698) 770 (1694)

AWWA C207 CLASS D 1511 (59.49) 999 (2198) 997 (2193)

AWWA C207 CLASS E 1511 (59.49) 1458 (3208) 1456 (3203)

AWWA C207 CLASS F 1651 (65.00) 2400 (5280) 2398 (5276)

AS4087 PN16 1490 (58.66) 1253 (2757) 1251 (2752)

AS2129 TABLE-D 1490 (58.66) 1023 (2251) 1021 (2246)

AS2129 TABLE-E 1490 (58.66) 1272 (2798) 1270 (2794)

PN25 1530 (60.24) 1559 (3430) 1557 (3425)

PN40 1575 (62.01) 2133 (4693) 2131 (4688)

AS4087 PN35 1530 (60.24) 2115 (4653) 2113 (4649)

ASME CL150 SERIES A 1510 (59.45) 1707 (3755) 1705 (3751)

ASME CL300 SERIES A 1465 (57.68) 2163 (4759) 2161 (4754)

ASME CL150 SERIES B 1390 (54.72) 1085 (2387) 1083 (2383)

ASME CL300 SERIES B 1510 (59.45) 2352 (5174) 2350 (5170)

DN1350 AWWA C207 CLASS B 1683 (66.26) 1350 1755 955 (37.59) 754 (29.69) 879 (34.61) 839 (33.03) 902 (35.51 981 (2158) 979 (2154)
(54 in.) (53.15) (69.09)
AWWA C207 CLASS D 1683 (66.26) 1213 (2669) 1211 (2664)

AWWA C207 CLASS E 1683 (66.26) 1942 (4272) 1940 (4268)

DN1400 PN6 1630 (64.17) 1400 1820 1085 (2387) 1083 (2383)
(56 in.) (55.11) (71.65)
PN10 1675 (65.94) 1731 (3808) 1729 (3804)

PN16 1685 (66.34) 1770 (3894) 1768 (3890)

ASME CL150 SERIES B 1600 (62.99) 1593 (3505) 1591 (3500)

PN25 1755 (69.09) 2368 (5210) 2366 (5205)

PN40 1795 (70.67) 3086 (6789) 3084 (6785)

ASME CL150 SERIES A 1745 (68.70) 2556 (5623) 2554 (5619)

ASME CL300 SERIES A 1710 (67.32) 3376 (7427) 3374 (7423)

ASME CL300 SERIES B 1765 (69.49) 3758 (8268) 3756 (8263)

Table 5.3 DN450 to 2400 (18 to 96 in. NB) (FEW) dimensions / weights (Continued)

34 OI/FEF/FEV/FEW–EN Rev. E
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 5 Sensor dimensions

Dimensions in mm (in.) Approx. weight in kg (lb)

DN Mating flange type D L (1.0D) L (1.3D) F C E G A Integral Remote

DN1500 JIS 5K 1730 (68.11) 1500 1950 1065 (41.92) 864 (34.02) 989 (38.94) 949 (37.36) 910 (35.83) 1029 (2264) 1027 (2259)
(60 in.) (59.05) (76.77)
JIS 10K 1795 (70.67) 1504 (3309) 1502 (3304)

ASME CL150 SERIES B 1725 (67.91) 2031 (4468) 2029 (4464)

AWWA C207 CLASS B 1854 (72.99) 1229 (2704) 1227 (2699)

AWWA C207 CLASS D 1854 (72.99) 1514 (3331) 1512 (3326)

AWWA C207 CLASS E 1854 (72.99) 2544 (5597) 2542 (5592)

ASME CL150 SERIES A 1855 (73.03) 3084 (6785) 3082 (6780)

ASME CL300 SERIES A 1810 (71.26) 3875 (8525) 3873 (8521)

ASME CL300 SERIES B 1880 (74.02 4181 (9198) 4179 (9194)

DN1600 PN6 1830 (72.05) 1600 2080 1066 (41.96) 865 (34.06) 990 (38.98) 950 (37.4) 1000 (39.37) 1434 (3155) 1432 (3150)
(64 in.) (62.99) (81.89)
PN10 1915 (75.39) 2525 (5555) 2523 (5551)

PN25 1975 (77.76) 3201 (7042) 3199 (7038)

PN16 1930 (75.98) 2768 (6090) 2766 (6085)

PN40 2025 (79.72) 4375 (9625) 4373 (9621)

DN1650 AWWA C207 CLASS B 2032 (80.00) N/A 2145 1116 (43.94) 915 (36.02) 1040 (40.94) 1000 (39.37) 1000 (39.37) 1504 (3309) 1502 (3304)
(66 in.) (84.45)
AWWA C207 CLASS D 2032 (80.00) 2025 (4455) 2023 (4451)

DN1800 PN6 2045 (80.51) N/A 2340 1181 (46.50) 980 (38.58) 1105 (43.50) 1065 (41.93) 1100 (43.31) 1853 (4077) 1851 (4072)
(72 in.) (92.13)
PN10 2115 (83.27) 3180 (6996) 3178 (6992)

PN16 2130 (83.86) 3657 (8045) 3655 (8041)

PN25 2195 (86.42) 4422 (9728) 4420 (9724)

AWWA C207 CLASS B 2197 (86.50) 1773 (3901) 1771 (3896)

AWWA C207 CLASS D 2197 (86.50) 2387 (5251) 2385 (5247)

DN1950 AWWA C207 CLASS B 2362 (92.99) N/A 2535 1291 (50.81) 1090 (42.91) 1215 (47.83) 1175 (46.26) 1180 (46.46) 2309 (5080) 2307 (5075)
(78 in.) (99.80)
AWWA C207 CLASS D 2362 (92.99) 3037 (6681) 3035 (6677)

DN2000 PN6 2265 (89.17) N/A 2600 2581 (5678) 2579 (5674)
(80 in.) (102.36)
PN10 2325 (91.54) 4254 (9359) 4252 (9354)

PN16 2345 (92.32) 4556 4554

(10023) (10019)

PN25 2425 (95.47) 5896 5894

(12971) (12967)

DN2100 AWWA C207 CLASS B 2534 (99.76) N/A 2730 1395 (54.91) 1194 (47.01) 1319 (51.93) 1279 (50.35) 1180 (46.46) 2641 (5810) 2639 (5806)
(84 in.) (107.48)
AWWA C207 CLASS D 2534 (99.76) 3487 (7671) 3485 (7667)

DN2200 PN6 2475 (97.44) N/A 2860 1330 (52.36) 3363 (7399) 3361 (7394)
(88 in.) (112.60)
PN10 2550 (100.39) 5795 5793
(12749) (12745)
DN2400 PN6 2685 (105.71 N/A 3120 1495 (58.85) 1294 (50.94) 1419 (55.87) 1379 (54.29) 1450 (57.09) 4100 (9020) 4098 (9016)
(96 in.) (122.83)
PN10 2760 (108.66) 6968 6966
(15330) (15325)

Table 5.3 DN450 to 2400 (18 to 96 in. NB) (FEW) dimensions / weights (Continued)

OI/FEF/FEV/FEW–EN Rev. E 35
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 5 Sensor dimensions

5.4 FEV – DN40 to 200 (11/2 to 8 in. NB)

Dimensions in mm (in.)
77.8 104. 5 98
(3.06) (4.11) (3.86)

Ø104
(7.91)

89
201

(3.5) (4.1)

(3.1)
78
F
G E

X D
C

X
L

Fig. 5.4 DN40 to 200 (11/2 to 8 in. NB) (FEV)

Dimensions in mm (in.) Approx. weight in kg (lb)

DN Mating flange type D L F C E G X Integral Remote

DN40 EN1092-1 PN10, PN40 150 (5.91) 200 (7.87) 260 (10.24) 30.4 (1.20) 185 (7.28) 138 (5.43) 30 (1.18) 12 (27) 11 (24)
(11/2 in.)
ASME B16.5 CLASS 150 127 (5.00)

JIS 10K 140 (5.51)

AS2129 TABLE F 140 (5.51)

AS2129 TABLE C D E 135 (5.31)

AS4087 PN14 135 (5.31)

DN50 EN1092-1 PN10, PN16 165 (6.50) 200 (7.87) 270 (10.63) 38.3 (1.51) 195 (7.68) 146 (5.75) 38 (1.50) 13 (29) 12 (27)
(2 in.)
ASME B16.5 CLASS 150 152.4 (6.00)

JIS 10K 155 (6.10)

AS4087 PN21 165 (6.50)

AS2129 TABLE F 165 (6.50)

AS2129 TABLE C D E 150 (5.91)

AS4087 PN14, PN16 150 (5.91)

DN65 AS4087 PN14, PN16 165 (6.50) 200 (7.87) 275 (10.83) 45.2 (1.78) 200 (7.87) 152 (5.98) 48 (1.89) 15 (33) 14 (31)
(21/2 in.)
AS2129 TABLE C D E 165 (6.50)

EN1092-1 PN10 185 (7.28)

EN1092-1 PN16 185 (7.28)

1
Table 5.4 DN40 to 200 (1 /2 to 8 in. NB) (FEV) dimensions / weights

36 OI/FEF/FEV/FEW–EN Rev. E
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 5 Sensor dimensions

Dimensions in mm (in.) Approx. weight in kg (lb)

DN Mating flange type D L F C E G X Integral Remote

DN80 EN1092-1 PN10, PN16 200 (7.87) 200 (7.87) 280 (11.02) 51.5 (2.03) 205 (8.07) 156 (6.14) 61 (2.40) 16 (36) 15 (33)
(3 in.)
ASME B16.5 CLASS 150 190 (7.48)

JIS 7.5K 211 (8.31)

JIS 10K 185 (7.28)

AS2129 TABLE C D E 185 (7.28)

AS4087 PN14, PN16 185 (7.28)

AS2129 TABLE F 205 (8.07)

AS4087 PN21 205 (8.07)

DN100 EN1092-1 PN10, PN16 220 (8.66) 250 (9.84) 320 (12.60) 63.75 (2.51) 245 (9.65) 196.8 (7.75) 70 (2.76) 19 (42) 18 (40)
(4 in.)
ASME B16.5 CLASS 150 228.6 (9.00)

JIS 7.5K 238 (9.37)

JIS 10K 210 (8.27)

AS2129 TABLE C D 215 (8.46)

AS4087 PN14, PN16 215 (8.46)

AS2129 TABLE E 215 (8.46)

AS4087 PN21 230 (9.06)

AS2129 TABLE F 230 (9.06)

DN125 EN1092-1 PN10, PN16 250 (9.84) 250 (9.84) 320 (12.60) 63.75 (2.51) 245 (9.65) 197 (7.76) 70 (2.76) 20 (44) 19 (42)
(5 in.)
ASME B16.5 CLASS 150 254 (10.00)

JIS 10K 250 (9.84)

AS2129 TABLE C D E 255 (10.04)

AS2129 TABLE F 280 (11.02)

DN150 EN1092 PN10, PN16 285 (11.22) 300 (11.81) 340 (13.39) 84.4 (3.32) 265 (10.43) 217 (8.54) 103 (4.06) 32 (70) 31 (68)
(6 in.)
ASME B16.5 CLASS 150 279 (10.98)

JIS 7.5k 290 (11.42)

JIS 10K 280 (11.02)

AS2129 TABLE C D 280 (11.02)

AS4087 PN14, PN16 280 (11.02)

AS2129 TABLE E 280 (11.02)

AS2129 TABLE F 305 (12.01)

AS4087 PN21 305 (12.01)

DN200 EN1092-1 PN10 340 (13.39) 350 (13.78) 365 (14.37) 109.8 (4.32) 290 (11.42) 243 (9.57) 150 (5.91) 49 (108) 48 (105)
(8 in.)
EN1092-1 PN16 340 (13.39)

ASME B16.5 CLASS 150 345 (13.58)

JIS 7.5K 342 (13.46)

JIS 10K 330 (12.99)

AS2129 TABLE C D 335 (13.19)

AS4087 PN14, PN 16 335 (13.19)

AS2129 TABLE E 335 (13.19)

AS2129 TABLE F 370 (14.57)

AS4087 PN21 370 (14.57)

1
Table 5.4 DN40 to 200 (1 /2 to 8 in. NB) (FEV) dimensions / weights (Continued)

OI/FEF/FEV/FEW–EN Rev. E 37
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 5 Sensor dimensions

5.5 FEF – DN250 to 600 (10 to 24 in. NB)

Dimensions in mm (in.)
Ø104
(4.1)

86 (3.4)

*Base
X
A
L
*Dimension C = centre line to base of flowmeter body

Fig. 5.5 DN250 to 600 (10 to 24 in. NB) (FEF)

Dimensions in mm (in.)

DN Mating flange type D L C G A X Approx. weight in kg (lb)

DN250 (10 in.) ASME B16.5 CLASS 150 405 (15.94) 450 (17.72) 215 (8.46) 301 (11.85) 300 (11.81) 250 (9.84) 88 (194)

ASME B16.5 CLASS 300 445 (17.52) 490 (19.29)

EN1092 -1 PN10 395 (15.55) 450 (17.72)

EN1092 – 1 PN16 405 (15.94)

EN1092 – 1 PN25 425 (16.73) 490 (19.29)

EN1092 – 1 PN40 450 (17.72)

JIS 5K 385 (15.16) 450 (17.72)

JIS 10K 400 (15.75)

AS4087 PN14, PN16 405 (15.94)

AS2129 TABLE C D

AS2129 TABLE E

AS4087 PN21 430 (16.93)

AS2129 TABLE F

Table 5.5 DN250 to 600 (10 to 24 in. NB) (FEF) dimensions / weights

38 OI/FEF/FEV/FEW–EN Rev. E
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 5 Sensor dimensions

Dimensions in mm (in.)

DN Mating flange type D L C G A X Approx. weight in kg (lb)

DN300 (12 in.) ASME B16.5 CLASS 150 485 (19.09) 500 (19.69) 231 (9.09) 317 (12.48) 352 (13.86) 300 (11.81) 128 (282)

ASME B16.5 CLASS 300 520 (20.47) 540 (21.26)

EN1092 – 1 PN10 445 (17.52) 500 (19.69)

EN1092 – 1 PN16 460 (18.11) 500 (19.69)

EN1092 – 1 PN25 485 (19.09) 540 (21.26)

EN1092 – 1 PN40 515 (20.28) 540 (21.26)

JIS 5K 430 (16.93) 500 (19.69)

JIS 10K 445 (17.52) 500 (19.69)

AS4087 PN14, PN16 455 (17.91) 500 (19.69)

AS2129 TABLE TABLE C D 455 (17.91) 500 (19.69)

AS2129 TABLE E 455 (17.91) 500 (19.69)

AS4087 PN21 490 (19.29) 500 (19.69)

AS2129 TABLE F 490 (19.29) 500 (19.69)

DN350 (14 in.) ASME B16.5 CLASS 150 535 (21.06) 550 (21.65) 257.5 (10.14) 346 (13.62) 376 (14.80) 350 (13.78) 100 (220)

ASME B16.5 CLASS 300 585 (23.03) 570 (22.44)

EN1092 – 1 PN10 505 (19.88) 550 (21.65)

EN1092 – 1 PN16 520 (20.47) 550 (21.65)

EN1092 – 1 PN25 555 (21.85) 570 (22.44)

EN1092 – 1 PN40 580 (22.83) 570 (22.44)

JIS 5K 480 (18.90) 550 (21.65)

JIS 7.5K 530 (20.87) 550 (21.65)

JIS 10K 490 (19.29) 550 (21.65)

AS4087 PN14, PN16 525 (20.67) 550 (21.65)

AS2129 TABLE C D E 525 (20.67) 550 (21.65)

AS4087 PN21 550 (21.65) 550 (21.65)

AS2129 TABLE F 550 (21.65) 550 (21.65)

AS4087 PN35 550 (21.65) 570 (22.44)

AS2129 TABLE H 550 (21.65) 570 (22.44)

DN375 (15 in.) AS4087 PN14, PN16 550 (21.65) 550 (21.65) 257.5 (10.14) 346 (13.62) 376 (14.80) 350 (13.78) 115 (253)

AS2129 TABLE C 550 (21.65) 550 (21.65)

AS4087 PN35 580 (22.83) 570 (22.44)

DN400 (16 in.) ASME B16.5 CLASS 150 600 (23.62) 600 (23.62) 285 (11.22) 371 (14.61) 420 (16.54) 400 (15.75) 115 (253)

ASME B16.5 CLASS 300 650 (25.59) 620 (24.41)

EN1092 – 1 PN10 565 (22.24) 600 (23.62)

EN1092 – 1 PN16 580 (22.83) 600 (23.62)

EN1092 – 1 PN25 620 (24.41) 620 (24.41)

EN1092 – 1 PN40 660 (25.98) 620 (24.41)

JIS 5K 540 (21.26) 600 (23.62)

JIS 7.5K 582 (22.91) 600 (23.62)

JIS 10K 560 (22.05) 600 (23.62)

AS4087 PN14, PN16 580 (22.83) 600 (23.62)

AS2129 TABLE C D E 580 (22.83) 600 (23.62)

AS4087 PN21 610 (24.02) 600 (23.62)

AS2129 TABLE F 610 (24.02) 600 (23.62)

AS4087 PN35 610 (24.02) 620 (24.41)

AS2129 TABLE H 610 (24.02) 620 (24.41)

Table 5.5 DN250 to 600 (10 to 24 in. NB) (FEF) dimensions / weights (Continued)

OI/FEF/FEV/FEW–EN Rev. E 39
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 5 Sensor dimensions

Dimensions in mm (in.)

DN Mating flange type D L C G A X Approx. weight in kg (lb)

DN450 (18 in.) ASME B16.5 CLASS 150 635 (25.00) 700 (27.56) 317.5 (12.50) 402 (15.83) 480 (18.90) 450 (17.72) 160 (352)

ASME B16.5 CLASS 300 710 (27.95)

EN1092 – 1 PN10 615 (24.21)

EN1092 – 1 PN16 640 (25.20)

EN1092 – 1 PN25 670 (26.38)

EN1092 – 1 PN40 685 (26.97)

JIS 5K 605 (23.82)

JIS 7.5K 652 (25.67)

JIS 10K 620 (24.41)

AS4087 PN14, PN16 640 (25.20)

AS2129 TABLE C D 640 (25.20)

AS2129 TABLE E 640 (25.20)

AS4087 PN21 675 (26.57)

AS2129 TABLE F 675 (26.57)

AS4087 PN35 675 (26.57)

AS2129 TABLE H 675 (26.57)

DN500 (20 in.) ASME B16.5 CLASS 150 700 (27.56) 770 (30.31) 345 (13.58) 429 (16.89) 520 (20.47) 500 (19.69) 217 (455)

ASME B16.5 CLASS 300 775 (30.51)

EN1092 – 1 PN10 670 (26.38)

EN1092 – 1 PN16 715 (28.15)

EN1092 – 1 PN25 730 (28.74)

EN1092 – 1 PN40 755 (29.72)

JIS 5K 655 (25.79)

JIS 7.5K 706 (27.80)

JIS 10K 675 (26.57)

AS4087 PN 14, PN16 705 (27.76)

AS2129 TABLE C D E 705 (27.76)

AS4087 PN21 735 (28.94)

AS2129 TABLE F 735 (28.94)

AS4087 PN35 735 (28.94)

AS2129 TABLE H 735 (28.94)

DN600 (24 in.) ASME B16.5 CLASS 150 815 (32.09) 920 (36.22) 387.5 (15.25) 472 (18.58) 610 (24.02) 600 (23.62) 315 (693)

ASME B16.5 CLASS 300 915 (36.02)

EN1092 – 1 PN10 780 (30.71)

EN1092 – 1 PN16 840 (33.07)

EN1092 – 1 PN25 845 (33.27)

EN1092 – 1 PN40 890 (35.04)

JIS 5K 770 (30.31)

JIS 7.5K 810 (31.89)

JIS 10K 795 (31.30)

AS4087 PN14, PN16 825 (32.48)

AS2129 TABLE C D 825 (32.48)

AS2129 TABLE E 825 (32.48)

AS4087 PN21 850 (33.46)

AS2129 TABLE F 850 (33.46)

AS4087 PN35 850 (33.46)

AS2129 TABLE H 850 (33.46)

Table 5.5 DN250 to 600 (10 to 24 in. NB) (FEF) dimensions / weights (Continued)

40 OI/FEF/FEV/FEW–EN Rev. E
F, V, W Series
Electromagnetic flowmeters | Full-bore flow sensors 6 Common accessories

6 Common accessories
Accessory Item Number

WaterMaster AC Fuse F1 Type T 250 mA A/S TR5 B20411

WaterMaster DC Fuse F2 Type T 2 A A/S TR5 B20412

WaterMaster Infra Red Comms Pack MJBX9932

WaterMaster Backplane PCB Board (STD) WATX2505

WaterMaster Sensor PCB Board WATX2506

WaterMaster Comms Cable WEBC2500

Signal cable for remote WaterMaster transmitter

5 m (15 ft.) STT4500/05
10 m (30 ft.) STT4500/10
20 m (60 ft.) STT4500/20
30 m (100 ft.) STT4500/30
50 m (165 ft.) STT4500/50
80 m (260 ft.) STT4500/80
100 m (325 ft.) STT4500/100
150 m (490 ft.) STT4500/150
500 m (1650 ft.) STT4500/500

Armored signal cable for remote WaterMaster transmitter

5 m (15 ft.) STT4501/05
10 m (30 ft.) STT4501/10
20 m (60 ft.) STT4501/20
30 m (100 ft.) STT4501/30
50 m (165 ft.) STT4501/50
80 m (260 ft.) STT4501/80
100 m (325 ft.) STT4501/100
150 m (490 ft.) STT4501/150
500 m (1650 ft.) STT4501/500

OI/FEF/FEV/FEW–EN Rev. E 41
F, V, W Series
Electromagnetic flowmeter

Notes

42 OI/FEF/FEV/FEW–EN Rev. E
F, V, W Series
Electromagnetic flowmeter

OI/FEF/FEV/FEW–EN Rev. E 43
F, V, W Series
Electromagnetic flowmeter

44 OI/FEF/FEV/FEW–EN Rev. E
Products and customer support
Automation Systems Customer support
For the following industries: We provide a comprehensive after sales service via a
— Chemical & Pharmaceutical Worldwide Service Organization. Contact one of the
— Food & Beverage following offices for details on your nearest Service and
— Manufacturing Repair Centre.
— Metals and Minerals
— Oil, Gas & Petrochemical UK
— Pulp and Paper ABB Limited
Tel: +44 (0)1453 826661
Drives and Motors Fax: +44 (0)1453 829671
— AC and 6 Drives, AC and DC Machines, AC Motors to
1kV USA
— Drive Systems ABB Inc.
— Force Measurement Tel: +1 215 674 6000
— Servo Drives Fax: +1 215 674 7183
Controllers & Recorders
— Single and Multi-loop Controllers
— Circular Chart and Strip Chart Recorders
— Paperless Recorders
— Process Indicators

Flexible Automation
— Industrial Robots and Robot Systems

Flow Measurement
— Electromagnetic Flowmeters
— Mass Flowmeters
— Turbine Flowmeters
— Wedge Flow Elements

Marine Systems & Turbochargers

— Electrical Systems
— Marine Equipment
— Offshore Retrofit and Refurbishment

Process Analytics
— Process Gas Analysis
— Systems Integration

Transmitters
— Pressure
— Temperature
— Level
— Interface Modules

Valves, Actuators and Positioners

— Control Valves
— Actuators
— Positioners

Water, Gas & Industrial Analytics Instrumentation

— pH, Conductivity and Dissolved Oxygen Transmitters
and Sensors Client Warranty
— Ammonia, Nitrate, Phosphate, Silica, Sodium, Prior to installation, the equipment referred to in this
Chloride, Fluoride, Dissolved Oxygen and Hydrazine manual must be stored in a clean, dry environment,
Analyzers in accordance with the Company's published
— Zirconia Oxygen Analyzers, Katharometers, Hydrogen specification.
Purity and Purge-gas Monitors, Thermal Conductivity Periodic checks must be made on the equipment's
condition. In the event of a failure under warranty,
the following documentation must be provided as
substantiation:
— A listing evidencing process operation and alarm
logs at time of failure.
— Copies of all storage, installation, operating and
maintenance records relating to the alleged faulty
unit.
Contact us

ABB Limited Note

OI/FEF/FEV/FEW–EN Rev. E 09.2013

We reserve the right to make technical
Process Automation
changes or modify the contents of this
Oldends Lane document without prior notice. With regard
Stonehouse to purchase orders, the agreed particulars
Gloucestershire GL10 3TA shall prevail. ABB does not accept any
responsibility whatsoever for potential
UK
errors or possible lack of information in this
Tel: +44 1453 826 661 document.
Fax: +44 1453 829 671
[email protected] We reserve all rights in this document and
in the subject matter and illustrations
contained therein. Any reproduction,
disclosure to third parties or utilization of its
ABB Inc. contents – in whole or in parts – is
Process Automation forbidden without prior written consent of
125 E. County Line Road ABB.

Warminster Copyright© 2013 ABB

PA 18974 All rights reserved
USA
Tel: +1 215 674 6000 3KXF210001R4201
Fax: +1 215 674 7183

ABB Engineering (Shanghai) Ltd.

Process Automation
No. 5, Lane 369, Chuangye Road
201319, Shanghai,
P.R. China
Phone: +86 (0) 21 6105 6666
Fax: +86 (0) 21 6105 6992
Mail: [email protected]

www.abb.com