SAPANG PALAY NATIONAL HIGH SCHOOL

City of San Jose del Monte

TECHNOLOGY AND LIVELIHOOD EDUCATION

SEMI FINAL EXAMINATION

COMPUTER SYSTEM SERVICING 10

Direction: Read the questions carefully. Shade the correct letter of your choice in the
answer sheet provided to you.

1. Among the following which is not a safety precautionary measure on working with a personal
computer?
A. Always unplug the computer from its power source
B. Be sure to mix electronic components with water
C. Remove jewelries before working with computer
D. Wear a non—conductive rubber soles
2. If in case there is fire in the workplace, what must you first do?
A. Break the glass section of the fire alert call point
B. Locate the source of fire
C. Do a head count inside the building
D. Locate any people
3. What consists of two or more computers that are linked in order to share resources such as
printers?
A. Network C. Network Gateway
B. Network Firewall D. Network Interface
4. All of the following are safety and anti—static rules except for:
A. Always use an uninterruptible power supply
B. Don’t touch the pins or other connectors
C. Never eat, drink or smoke while working on a computer
D. Use an ordinary wrist strap when working on a computer
5. What is the very first thing to do in disassembling and assembling computer parts?
A. Ground or discharge yourself before touching any parts of the computer
B. Do not work alone so there’s somebody who can take care of you in case of emergency
C. Unplug the computer before you start working on it
D. Be careful of the tools that may cause short circuit
6. What computer part are the sockets in the main board where the adapter cards can be inserted
into the motherboard?
A. expansion slots C. expansion bus
B. expansion wire D. both a and c
7. What computer part interprets instructions given by the software and carries out those
instructions by processing data and controlling the rest of the computer’s components?
A. Main Memory C. Northbridge
B. Southbridge D. Central Processing Unit
8. Which tool is used to conduct to test network cable wiring, it can either do auto or manual
testing?
A. Desoldering Tool C. LAN Tester
B. LAN Card D. Soldering Tool
9. Which network connects a larger geographic area such as San Jose del Monte, the Philippines
or the world?
A. Local Area Network C. Wide Area Network
B. Metropolitan Area Network D. Internet
10. What refers to the protective clothing designed to protect the wearer’s body from injury or
hazards in the workplace?
A. Materials / Equipment
B. Occupational Health and Safety Procedures
C. Personal Protective Equipment
D. Safety Measures
11. What port is used to connect data storage device and is intended for serial replacement for
parallel bus?
A. malware C. hardware
B. software D. firewire
12. What is another term for Northbridge?
A. accelerated graphics port C. memory controller hub
B. chipset D. input/output controller hub
13. What is another term for Southbridge?
A. accelerated graphics port C. memory controller hub
B. chipset D. input/output controller hub
14. Which computer part supplies power for most of the computer components?
A. Molex and Berg C. ATX Power
B. Power Supply D. Four Pin Power Connector
15.What bus is the standard bus for personal computer mass storage devices?
A. IDE C. PCI
B. USB D. ISA
16. Which of the following is the first step in Personal Computer Disassembly?
A. Prepare your workplace
B. Make Space, Make Time
C. Open the outer shell
D. Unplug all cables that are connected to your PC
17. What hardware cools the CPU and other important components?
A. power supply C. heat sink
B. fan D. none of the above
18. Which of the following shows the measuring unit of a computer’s processor or its clock speed?
A. 80 GB C. 4GB RAM
B. ATI Radeon 9800 D. Intel Core i3 @ 220 GHz
19. What best described why do we have to wear a face mask while working with computer?
A. to prevent germs and bacteria in entering our body
B. to make a fashion statement
C. to avoid inhalation of dust and other chemical in our body
D. to prevent small particles stain our skin
20. Which best describes the best function of a modem?
A. Modem is used for networking
B. Modem protects the network from unauthorized access
C. Modem translate digital signal from a computer to analog signal across conventional
phone lines.
D. Modem is a device that connects a client computer, server, printer, or other component
to your network.

21—25 classify whether it is A—Equipment, B—Tools, C—Materials, D—None of the above

21. Uninterruptible Power Supply
22. RJ 45
23. Modem
24. Multi—tester
25. Lan Card
26. In building a computer, what do you think is the best characteristics to possessed?
A. patience & gentleness C. beauty and brain
B. knowledge & skills D. all of the above
27. What refers to the physical size and shape of a device?
A. layout C. specification
B. form factor D. Arrangement
28. What device is used to gather signals from devices that are connected to it and regenerates a
new copy of each signal?
A. Bridge C. Hub
B. Ethernet Switch D. Routers
29. Which of the following component should be removed first in PC Disassembly
A. Case C. Connectors
B. Cables D. Drives
30. Where will you categorized the printer?
A. Equipment C. Tools
B. Materials D. All of the above
31. What RAM can retain data without electrical power?
A. Diskette C. Flash Drive
B. Hard Disk Drive D. BIOS
32. Which of the following statement is correct with PC Assembly?
A. Prepare the motherboard before you install it on your PC
B. Install the CPU and the Heat Sink while the motherboard is inside
C. Work on a flat stable top surface barefoot
D. Never use an anti—static wrist strap
33. Which device reduce the amount of traffic on a LAN by dividing it into two segments?
A. Bridge C. Hub
B. Ethernet Switch D. Routers
34. What consists of two or more computers that are linked together in order to share its resources
like printers, exchange files or allow electronic communication?
A. Local Area Network C. Network
B. Metropolitan Area Network D. Internet
35. What part of computer is the main circuit board of the system unit, which has some electronic
components attached to it and others built into it?
A. mobo
C. mother board
B. main board D. all of the above

36—50 Blacken A, if the steps belong to Assembly and B if it belongs to Disassembly and C If it
doesn’t belong to PC Disassembly and Assembly

36. Connect the Power Supply

37. Install Internal Drives
38. Unplug all the cables and wires
39. Pull out the Motherboard
40. Detaching the Outer Shell
41. Prepare your workplace
42. Place the motherboard into the case
43. Prepare the Motherboard
44. Remove the system fan
45. Install the CPU with Heatsink
46. Ground or discharge yourself before touching any part of the unit
47. Connect the power supply
48. Remove all the connectors
49. Remove the power supply
50. Attach the Ram Modules
 ARDEE_semi

SAPANG PALAY NATIONAL HIGH SCHOOL

City of San Jose del Monte
TECHNOLOGY AND LIVELIHOOD EDUCATION

SEMI FINAL EXAMINATION

COMPUTER SYSTEM SERVICING 10

KEY TO CORRECTION

1. B
2. A
3. A 26. A
4. D 27. C
5. C 28. B
6. D 29. A
7. D 30. A
8. C 31. C
9. C 32. A
10. C 33. A
11. D 34. C
12. C 35. D
13. D 36. A
14. B 37. A
15. B 38. B
16. D 39. B
17. C 40. B
18. D 41. A
19. C 42. A
20. C 43. A
21. A 44. B
22. C 45. A
23. A 46. C
24. B 47. A
25. A 48. B
49. B
50. A