AREA : UPPER TANA POWER STATION

DEPARTMENT: OPERATIONS - SAGANA

PROCUREMENT OF: SMED TOOLS FOR SAGANA POWER STATION

RFX No. 5000017061

Kenya Electricity Generating Company PLC

Stima Plaza Phase III, Kolobot Road, Parklands
P.O. BOX 47936-00100
NAIROBI.
Website: www.kengen.co.ke

MAY, 2025

1
 TABLE OF CONTENTS

REQUEST FOR QUOTATIONS .................................................................................. ………….3

PART 1: INSTRUCTIONS TO TENDERERS ......................................................................... 4

QUOTATION AND QUALIFICATION DOCUMENTS......................................................... 6

FORM OF QUOTATION ..................................................................................................... 7

PART 2: SCHEDULE OF REQUIREMENTS TABLE .................................................................. 8

I) TABLE PRELIMINARY/MANDATORY REQUIREMENTS..........................................9

II) TABLE B: TECHNICAL SPECIFICATIONS…………………………………….............9

III) TABLE C: SCHEDULE OF RATES/BILL OF QUANTITIES…………………..........10

IV) FORM FOR DISCLOSURE OF INTEREST………………………………………….10

V) CERTIFICATION .................................................................................................... 11

VI) CONFLICT OF INTEREST DISCLOSURE………………………………………….11

VII) CERTIFICATE OF INDEPENDENT QUOTATION DETERMINATION.................... 12

VIII) SELF-DECLARATION FORM ................................................................................. 13

PART 3: CONTRACT

I) CONDITIONS OF CONTRACT………………………………………………………14-16

II) CONTRACT AGREEMENT.…………………………………………………………..14-16

2
 REQUEST FOR QUOTATIONS (RFQ)

The Kenya Electricity Generating Company PLC invites you to submit quotation
for Procurement of Supply, Installation and Commissioning of solar street lighting
for mesco power station. The quotation shall follow the instructions and
documents in this RFQ document and shall be in English Language.

Quotations shall be submitted in accordance with the instructions in part 1:

Quotations to be submitted via SRM not later than:

Date: 23rd May 2025

Time: 02:00 p.m.

The system will automatically restrict submission of tenders once the submission deadline
has reached.

Enquiries regarding this quotation may be addressed to;

General Manager, Supply Chain,

Kenya Electricity Generating Company PLC,
Stima Plaza Phase III, Kolobot Road, Parklands

Email:[email protected];[email protected];[email protected];
[email protected]

User email; [email protected]

KenGen adheres to high standards of integrity in its business operations. Report

any unethical behavior immediately to any of the provided anonymous hotline
service.

Call Toll Free: 0800722626, Free-Fax: 00800 007788, Email: kengen@tip-

offs.com , Website: www.tip-offs.com

3
 PART 1: INSTRUCTIONS TO TENDERERS

1. Tenderers are advised to read carefully these instructions before

preparing the quotation. The standard forms in this RFQ may be
photocopied for completion but the Tenderer is responsible for their
accurate reproduction.

The term Tenderer shall mean the firm or person invited to submit a
quotation.

The term Quotation herein shall mean the quotation submitted as usually
understood in public procurement.

2. Validity of Quotations: The quotation will be held valid for 90 days from the date of
submission.

3. The Quotation shall consist of completed Table A (Schedule of

Requirements, Technical Specifications, Quantity and Prices) the Form of
Quotation all indicated in this Request for Quotation, and documents to
evidence Eligibility and Conformity to Technical Specifications.

4. Opening of Quotations: Quotations will be opened immediately after the

closing date and time specified, by at least three appointed officials of the
Procuring Entity.

5. Invitation not transferable: This invitation is not transferable to other firms or

individuals not so invited.

6. Technical Specifications: Documentary evidence to show that the goods meet the
technical specifications.

7. Alternative Quotations: not permitted.

8. Evaluation of Quotations:

i. Preliminary/Mandatory Requirements
MR 1 Dully filled Form of quotation document
MR 2 Attach copy of certificate of registration/Incorporation
MR 3 Attach Copy of Certificate of Confirmation of Directors and Shareholding (CR 12)
for Limited company (where applicable) or Copy of Identity Card (ID) if Sole
Proprietor, CR12 should have been generated at least 6 months prior to closure
date of RFQ
MR 4 Attach valid copy of tax compliance certificate
MR 5 Attach valid copy of AGPO Certificate
MR 6 Attach valid business permit
MR 7 Attach KRA pin
MR 8 Attach dully filled Certificate of independent Quotation Determination

4
ii. Technical Requirements
Compliance with technical specifications. Quotations failing this stage
will be rejected and not considered in financial evaluation stage.

TR 1 Completeness of Table B
TR 2 Data sheets, brochures and catalogs for the specific items being offered

iii. Financial comparison of quotations to determine the lowest evaluated

quotation, for comparison purposes only, foreign currency quotations
will be converted to Kenya shillings using the exchange rates published
by the Central Bank of Kenya on the day of submission of quotations.

9. Lowest Evaluated Quotation:

The lowest evaluated quotation shall be recommended for award of contract.

10. Award of contract: Award of contract shall be by placement of a Local

Purchase Order. The currency of award and payment shall be currency in
which the quotation was submitted. Unsuccessful tenderers who
responded will be notified via SRM.

11. Right to Reject: The Procuring Entity reserves the right to accept or reject
any quotation or to cancel the quotation process and reject all quotations
at any time prior to award.

5
 QUOTATION AND QUALIFICATION DOCUMENTS

Instructions to Tenderer

Tenderer must complete and

submit as part of the Form of
quotation.
(i) SCHEDULE OF REQUIREMENTS, QUANTITIES AND PRICE

(ii) FORM FOR DISCLOSURE OF INTEREST

(iii) CERTIFICATE OF INDEPENDENT QUOTATION DETERMINATION

(iv) SELF-DECLARATION FORM

6
 FORM OF QUOTATION [To be completed by Tenderer]

Quotation addressed to Kenya Electricity Generating Company PLC

Upper Tana Power Stations,
P.O. Box 230-60100, Murang’a, Kenya
14.05.2025
RFX No. 5000017061
SMED tools for Sagana power station

1. We have examined and have no reservations to the Request for Quotation

document and understand its full content and intent.

2. In compliance with your request for quotations dated 14.05.2025

referenced above, we offer to supply Goods to be supplied to cover and
conform to our pricing listed in the attached in Table A at a total price of
Kenya Shillings (in words)

3. We confirm that we are eligible to participate in public procurement and

meet the eligibility criteria.

4. We confirm that the prices quoted are fixed and firm for the duration of the
validity period and performance of the contract and will not be subject to
revision or variation.

5. The validity period of our quotation is 90 days from the time and date
of the submission deadline

6. We confirm we are not submitting any other Quotation as an individual

or firm, and we are not participating in any other Quotation as a Joint
Venture member or as a subcontractor for this Procurement.

7. We hereby certify that we have taken steps to ensure that no person acting
for us or on our behalf engages in any type of Fraud and
Corruption/Debarment.

8. We hereby certify and confirm that the Quotation is genuine, non-

collusive and made with the intention of accepting the contract if
awarded. To this effect we have signed the “Certificate of Independent
Quotation Determination” attached.

9. We, the Tenderer, have completed fully and signed the FORM FOR
DISCLOSURE OF INTEREST- interest of the firm in the Procuring Entity,
attached.

The Delivery/Completion period offered is: 5 days from

date of acceptance of Quotation.
Quotation Authorized by:

Name AISHA HUSSEIN ADAWA, DIRECTOR

Signature:

7
PART 2: SCHEDULE OF REQUIREMENTS

INTRODUCTION
Kindly attach the below mandatory requirements and fill in where necessary.

TABLE A: SCHEDULE OF PRELIMINARY REQUIREMENTS

PART1
ITEM DESCRIPTION REMARKS
1. Dully filled quotation document Dully filled quotation document with price
schedule, properly filled, signed and stamped.
2. Attach Copy of Certificate of Attach Valid
Confirmation of Directors and
Shareholding (CR 12) for Limited
company (where applicable) or Copy of
Identity Card (ID) if Sole Proprietor,
CR12 should have been generated at
least 6 months prior to closure date of
RFQ
3. Valid tax compliance certificate Copy provided must be valid as at date of
Quotation opening.
4. Certificate of Copy provided must be valid as at date of
registration/incorporation Quotation opening.
5. Valid AGPO certificate Copy provided must be valid as at date of
Quotation opening.
6. Principal place of business (attach Copy provided must be valid as at date of
business permit or trading license) Quotation opening.

7. Attach KRA pin Copy provided must be valid as at date of

Quotation opening
8. Attach dully filled Certificate of Attach dully filled
independent Quotation Determination
NO REQUIREMENT Please fill in below information
1 Name of supplier ADOW WHOLESALERS LTD.
2 Registration Details PVT-9XUQE22
(ID/Registration/Incorporation
Number)
3 PIN Number P051926368Z
4 List of Directors, Shareholders and AISHA HUSSEIN ADAWA
Beneficial Owners (in case of a ABDIRAHMAN MOHAMED AHMED
company)
5 Name of Proprietor (for sole proprietor N/A
and business name)
6 Name of Partners (for partnerships) N/A
7 Business Contact Information TELEPHONE NO. 0725724329
(Telephone and Email Address) [email protected]
8 Postal Address 218-00200 NAIROBI
9 Physical Address WABERA STREET, ST ELLIS HOUSE.

8
 10 Gender WOMEN
11 ID NO./Passport No. 33940016
12 County of Operations NAIROBI
13 AGPO Certificate Number NT/PPD/2025/DGW/2973

TABLE A SCHEDULE OF REQUIREMENTS, TECHNICAL SPECIFICATIONS, QUANTITY AND PRICE

PART 2: SCHEDULE OF REQUIREMENTS

All tenderers shall be required to highlight the features in the table below in the product
brochure as part of technical specifications and failure to do so will make the bid technically
non-responsive.
No Item Descripition Deviations (Indicate if any)
Supply a Professional Cordless Nail gun with NO DEVIATION
the following specifications:
• Collation angle 20 °
• Nail diameter 1.6 mm
• Nail length 32 – 64 mm
• Nail/Staple type
• Finish nail
1. • Triggering system
• Full sequential actuation + contact actuation
with automatic reversion
• Weight excl. battery 2.9 kg
• Battery voltage 18.0 V
• Packaging dimensions (width x length x height)
295 x 380 x 100 mm
• Supplied with two magazines per set

Supply a Corded Professional Heat Gun with NO DEVIATION

the following specifications:
• Rated input power 2300 W
• Voltage, electrical 230 V
• Weight 0.67 kgs
• Working temperature 50 – 650 °C
• Airflow 150 – 500 l/min
2. • Sound power level 76 dB(A)
• Uncertainty K 3 dB
• Glass protection nozzle 75 mm
• Surface nozzle 50 mm
• Welding shoe, 10 mm
• Reflector nozzle, 32 x 33 mm
• Reduction nozzle, 9 mm
• Supplied in a Carrying case

Supply an Orbital Sander with the following NO DEVIATION

specifications:

• Rated input power 190 W

3. • Weight 1.5 kg
• No-load speed 12,000 rpm
• No-load orbital stroke rate 24,000 opm
• Orbit diameter 2 mm
• Sanding plate, width 92 mm
• Sanding plate, length 182 mm
9
 • Sanding sheet for clamping, width 93 mm
• Sanding sheet for clamping, length 230 mm
• Sanding sheet with hook-and-loop fastening,
width 93 mm
• Sanding sheet with hook-and-loop fastening,
length 185 mm

Supply an Auto Darkening Welding Helmet NO DEVIATION

with the following specifications:
• Welding Helmet for: TIG MIG MMA (Gas
Tungsten Arc Welding, Metal Inert Gas
Welding, Shielded Metal Arc Welding)

Auto-Darkening Lens:

• Viewing Size: 3.64″ x 1.67″ (large viewing

area)
• Dual High-Tech Sensors
• Should have fast and accurate switching from
4. light to dark state (1/30000 sec)
• True color view with 1/1/1/1 optical clarity
for realistic color representation

Lens Design:

• Cheater Lens Compatible: Allows for easy

addition of corrective lenses for improved
vision during welding
• Magnifying Lens Compatible: Option to add
magnification lenses for detailed welding tasks
• Extended Battery Life
• Headgear: Pivot style for exceptional comfort
and adjustability

Supply a Laser Measure with the following NO DEVIATION

specifications:
• Laser diode 635 nm, < 1 mW
• Measurement range 0.15 – 20.00 m
• Weight, approx. 0.13 kg
• Measurement time, typical <0.5 s
• Units of measurement m/cm, ft/inch
5. • Laser class 2
• Measurement accuracy, typical ± 3.0 mmᵈ
• Power supply 2 x 1.5 V LR03 (AAA)
• Automatic deactivation 5 min
• Battery lifetime, individual measurements,
approx. 5,000
• Battery lifetime, operating time, approx. 5 h
• Laser colour Red
• Measuring range, up to 20 m

Supply a Vernier Height Gauge with NO DEVIATION

the following specifications:
• Analog
• Supplied with carbide tipped scriber, scriber
clamp
6. • Range: 0 - 300 mm
• Graduation: 0,02 mm
• Max. Permissible Error E MPE: ±0,04 mm
• Fine adjustment: 4 mm
• Scale adjustment: 15 mm
• Inch-Metric: Metric
• Mass: 3.1 kg

10
 Supply a Surface Roughness Tester with the following
specifications:

• X Axis measurement range: 16 mm

• Detection Unit measurement range: 360 μm (-
200 to + 160 μm)
• Detector measurement range/resolution: 360
μm/0.02 μm, 100 μm/0.006 μm, 25
μm/0.002 μm
• Measured speeds: 0.25 mm/s, 0.5 mm/s, 0.75
mm/s
• Measured speed at return: 1 mm/s
• Measurement Force/Stylus tip shape: 0.75
mN/2 μmR 60 °
• Compatible standards: JIS '82, JIS' 94, JIS '01,
ISO' 97, ANSI, VDS
• Evaluation Curves: cross section Curve,
Roughness Curve, DF Curve and also Chief
Roughness Curve
• Parameters: Ra, Rc, Ry, Rz, Rq, Rt, Rmax, Rp, Rv,
R3z, Rsk, Rku, Rc, RPc, Rsm, Rz1max, S, HSC,
RzJIS, Rppi, R △ a, R △ q, Rlr, Rmr, Rmr (c), R
δc, Rk, Rpk, Rvk, Mr 1, M2, A1, A2, Vo, Rpm,
tp, Htp, R, Rx, AR Customizable
• analysis brushes: load curve, amplitude
distribution curve
• Filter: Gauussian, 2CR 75, PC 75
• c Cutoff value: 0.08, 0.25, 0.8, 2.5 mm
• cut-off value: 2.5, 8 μm
• Base Length: 0.08, 0.25, 0.8, 2.5 mm
• Number of sections: X1, X2, X3, X4, X5, X6, X7,
X8, X9, X 10, arbitrary (0.3 to 16.0 mm/0.01
mm interval)
• Liquid Crystal Dimensions (mm): 36.7 x 48.9
mm
7. • Display language: 16 languages (Japan, UK, NO DEVIATION
Germany, France, Italy, Spain, Portugal, Korea,
China (Simplified, Traditional), Czech Republic,
Poland, Hungary, Turkey, Sweden, Netherlands)
• Arithmetic Result Display: Vertical/1-Step
Display, 3 stages Display, Trace Display,
Horizontal/1-Step Display, 4 stages Display,
Trace Display (Horizontal display can be
switched horizontally.)
• Printing function: measurement conditions,
calculation results, pass/fail judgment results,
calculation results for each section, evaluation
curves, load curves, amplitude distribution
curves, and environment setting items
• External Input/Output Function: USB I/F,
Digimatic Output, Printer Output, RS -232 C
I/F, Foot Switch I/F
• Pass/fail judgment function: maximum value
rule, 16% rule, average value rule
• Saving of measurement conditions: Saving of
conditions when power supply is OFF
• Storage Function: Built-in Memory/10
Measurement Conditions, Memory Card
(Options)/500 Measurement Conditions,
10,000 Measurement Data, 500 Screen Data,
Text File (Measurement
conditions/measurement data/evaluation
curve/load curve/amplitude distribution
curve)
• Calibration: Automatic Calibration Method with
Numeric Input/Average Calibration Method
with Multiple Measurements (Up to 12 times)
• Power-Saving Features: Auto-Sleep (30 to 600
sec Optional) Feature
• power supply: Integrated Battery (Ni-MH
rechargeable battery), 2 power supply on AC
Adapter

11
 • Built-in battery charge time: approx. 4 hours (It
may vary depending on the ambient
temperature.)
• Measurable times (When the internal battery is
fully charged): Approx. 1500 times (May vary
depending on usage conditions, environment,
etc.)
• Size: 52.1 x 65.8 x 26 mm (Slide cover closed,
detector not installed)
• Weight cookies : about 500 g (Arithmetic
display unit, drive unit, and standard detector)
• Accessories: Connection Cable/12 BAA 303,
Roughness Standard Product/178 -601,
Carrying Case/12 BAR 344, Calibration
Table/12 BAK 700, Display Protection Sheet,
AC Adapter, Operation Manual, One-Sheet
Manual, Warranty

Supply Interchangeable Anvil Type Micrometers with

the following specifications:

• Range 0 – 150mm
• No of Anvils 6
• No of standards 5
• Graduation 0.01mm
8. • With one-piece carbide tip spindle
• Interchangeable hardened anvils with ground NO DEVIATION
threads. Micro-lapped anvil and spindle faces
• Perforated frame with enamel finish.
• Supplied with standards
• Should have ratchet stop, positive locking
clamp
• Supplied in a wooden or plastic storage case.

Supply Interchangeable Anvil Type Micrometers with

the following specifications:

• Range 150 – 300mm

• No of Anvils 6
• No of standards 6
• Graduation 0.01mm
9. • With one-piece carbide tip spindle
• Interchangeable hardened anvils with ground
threads. Micro-lapped anvil and spindle faces NO DEVIATION
• Perforated frame with enamel finish.
• Supplied with standards
• Should have ratchet stop, positive locking
clamp
• Supplied in a wooden or plastic storage case.

Supply Interchangeable Anvil Type Micrometers with

the following specifications:

• Range 300 – 400mm

• No of Anvils 4
• No of standards 4
• Graduation 0.01mm
10. • With one-piece carbide tip spindle
• Interchangeable hardened anvils with ground
threads. Micro-lapped anvil and spindle faces NO DEVIATION
• Perforated frame with enamel finish.
• Supplied with standards
• Should have ratchet stop, positive locking
clamp
• Supplied in a wooden or plastic storage case.

12
 Supply Interchangeable Anvil Type Micrometers with
the following specifications:

• Range 400 – 500mm

• No of Anvils 4
• No of standards 4
• Graduation 0.01mm
11. • With one-piece carbide tip spindle
• Interchangeable hardened anvils with ground
threads. Micro-lapped anvil and spindle faces NO DEVIATION
• Perforated frame with enamel finish.
• Supplied with standards
• Should have ratchet stop, positive locking
clamp
• Supplied in a wooden or plastic storage case.

Supply Interchangeable Anvil Type Micrometers with

the following specifications:

• Range 500 – 600mm

• No of Anvils 4
• No of standards 4
• Graduation 0.01mm
12. • With one-piece carbide tip spindle
• Interchangeable hardened anvils with ground NO DEVIATION
threads. Micro-lapped anvil and spindle faces
• Perforated frame with enamel finish.
• Supplied with standards
• Should have ratchet stop, positive locking
clamp
• Supplied in a wooden or plastic storage case.

Supply Interchangeable Anvil Type Micrometers with

the following specifications:

• Range 600 – 700mm

• No of Anvils 4
• No of standards 4
• Graduation 0.01mm
13. • With one-piece carbide tip spindle
• Interchangeable hardened anvils with ground NO DEVIATION
threads. Micro-lapped anvil and spindle faces
• Perforated frame with enamel finish.
• Supplied with standards
• Should have ratchet stop, positive locking
clamp
• Supplied in a wooden or plastic storage case.

Supply Interchangeable Anvil Type Micrometers with

the following specifications:

• Range 700 – 800mm

• No of Anvils 4
• No of standards 4
• Graduation 0.01mm
14. • With one-piece carbide tip spindle NO DEVIATION
• Interchangeable hardened anvils with ground
threads. Micro-lapped anvil and spindle faces
• Perforated frame with enamel finish.
• Supplied with standards
• Should have ratchet stop, positive locking
clamp
• Supplied in a wooden or plastic storage case.

13
 Supply Engineers Steel Rule with the following
specifications:

• Tempered stainless steel

• Satin chrome
• Anti glare finish with permanent black figures
15. and graduations
• Rigid blade NO DEVIATION
• Should have a round end
• Subdivided to 0.5mm and 1 mm
• Should be figured at every 1omm
• Scale type: Metric and Imperial
• Length: 1000 mm

Supply Tapered gauges with the following

specifications:

• Range 1 – 15mm
• Material: Spring tempered steel
16. • Increments of 0.1 mm NO DEVIATION
• Rustless
• Constant at 20oC
• Satin chrome anti glare finish
• Permanent black figures and graduations

Supply Tapered gauges with the following

specifications:

• Range 15 – 30 mm
• Material: Spring tempered steel
17. • Increments of 0.1 mm NO DEVIATION
• Rustless
• Constant at 20oC
• Satin chrome anti glare finish
• Permanent black figures and graduations

Supply pipe threader / die with the following

specifications:

18. • Lockable reversible ratchet

• Dies material: high quality tempered steel NO DEVIATION
• Supplied with case
• Die sizes: ½” , ¾” and 1” ,11/4”, 11/2”,2”

Supply Screw pitch gauge with the following

specifications:

• Manufactured from hardened and polished

19. steel NO DEVIATION
• precision milled blades
• Range of sizes: Whitworth - 4 - 62 TPI;
• Metric - 0.75 - 6mm; American - 4 - 42 TPI.

Supply Radius gauges with the following specifications:

• Manufactured from hardened and polished

steel
• Precision milled blades
20. • For measuring internal and external radii. NO DEVIATION
Enclosed in a steel case.
• Size range:
• 34 Blade Metric: 1.0 to 3.0 x .25 and
• 3.5 to 7.0 x .5

14
 Supply Radius gauges with the following specifications:

• Manufactured from hardened and polished

steel
• Precision milled blades
21. • For measuring internal and external radii. NO DEVIATION
Enclosed in a steel case.
• Size range:
• 32 BladeMetric: 7.5 to 15.0 x .5
•
Supply Portable Tool Chest

• Overall dimensions (W x H x D): 520 x 340 x

215mm.
• Three full-length drawers with rigid aluminium
edged

• Heavy gauge steel with all welded

• construction.
• Durable and corrosion-resistant two part
22.
• epoxy powder paint finish. NO DEVIATION
• With quick release lid clasps, padlock hasps
and textured carry handles.
• Full width piano hinges
• handles.
• Fully lockable unit with a handle on the top and
a carry
• handle on each end. The lid automatically locks
all of the closed
• drawers when lowered to prevent opening.
Supply 300 Piece Engineers Professional Tool Kit
• Overall dimensions: 890 x 690 x 460mm.
• five drawer professional roller cabinet and a
three drawer top chest.
• Manufactured from heavy gauge steel with
double wall construction side panels and
welded joints for added rigidity.
23.
• Coated in a hard wearing epoxy powder. NO DEVIATION
running ball bearing drawer slides with double
sliders on base drawer
• Fully locking. 125 x 50mm heavy duty extra
strong castors, fitted with two brakes.
• Castors are rated to 100kg capacity standing
load per castor.
Supply 150 piece Socket & Spanner Tool Box set
• Should include a collection of sockets, ratchets,
wrenches, bits and universal joint
• Made from premium-quality chrome vanadium
24. steel with a mirror chrome plated finish.
• 150 PCS set
• Metric and SAE socket sizes combined. NO DEVIATION
• Provided in a sturdy Case

15
 Supply 90 Piece Workshop Engineer Tool Kit in Top
Tool Chest
Contents:
• Top chest.
• 24 piece 1/2" drive metric socket set.
• Six piece 16cm cut 2 assorted needle file set.
• 10x 12" x 1/2"x 18tpi all hard hacksaw blades.
• 8"/200mm chrome vanadium adjustable spanner.
• 12" rule - walleted.
• Metric/inch feeler gauge 60mm blade length.
• 11/2lb ball pein hammer- hickory shaft.
• 16oz black rubber mallet - wood shaft.
• 5m/16ft locking tape rule - chromed case.
• Eight segment 18mm heavy duty snap-off blade knife. NO DEVIATION
25.
• Retractable trimming knife.
• DIY hacksaw.
• 2x 50mm G-clamps.
• 2x 100mm G-clamps.
• 6" snipe nose plier/side cutter.
• 8" straight blade tinsnip.
• 6" diagonal cutting nipper.
• 7" linesman's pliers.
• 10" multiple slip joint pliers.
• 10" straight jaw high strength grip wrench.
• 16 function 10-blade tool.
• 15 piece dual grip screwdriver set.
• 14 piece 6 - 19mm drop forged combination spanner
set.
Supply Blade Feeler Gauges with the following
specifications:

26. • Hardened and polished taper blades

• Blades are clearly marked. NO DEVIATION
• Length 500mm
• Range 0.05 -1mm.

Supply Automatic Center Punches with the following

specifications:

• Heavy Duty
27. • Strength of punch and depth of depression is
adjustable byturning the knurled head. NO DEVIATION
• Delivers a punch between 6.3 to 22.5kg (14 to
50lb).Range 0.05 -1mm.
• Length 149 mm

Supply Surveyors Tape Measure with the following

specifications:

• Fibreglass blade.
• Robust ABS open frame and winding handle.
• Folding end claw.
28. • Strong and lightweight
• Double NO DEVIATION
• Marking spike
• Large ‘D’ type handle with rubber.
• Manufactured within the tolerance of EEC Class
II

29. Supply Road Measuring Wheel with Carry Case with

16
 the following specifications:

• Gear driven 5-digit counter mechanism

• Weather resistant housing,
• ‘exact’ point indicator, trigger
• operated brake
• spring loaded kickstand
• two reset buttons

Supply Snap-off Blade Retractable Knives with the

following specifications:

30. • High strength ABS plastic construction with NO DEVIATION

slider lock.
• Standard: 160mm. 18 x 100mm, 8 segment
blade.

Supply Extra Heavy-duty G-Clamps with the following

specifications:

• Manufactured from drop forged Steel

31. • Ribbed anti-twist frame
• Capacity 300 mm NO DEVIATION
• Throat depth 130 mm
• Handle and swivel shoes.

Supply Hydraulic Grease Nipple Kit with the following

specifications:

• 120 piece set

• made of precision steel
• zinc plated
• hardened
• blue chromed
• 6x1 straight 30 pcs
• M8x1 straight 20 pcs
32. • M10x1 straight 10 pcs NO DEVIATION
• G 1/8 straight 10 pcs
• M6x1 45° 5 pcs
• M8x1 45° 10 pcs
• M10x1 45° 5 pcs
• G 1/8 45° 5 pcs
• M6x1 90° 5 pcs
• M8x190° 10 pcs
• M10x1 90°5 pcs
• G 1/8 90° 5 pcs

Supply Digital Torque and Angle Adapter with the

following specifications:

• Torque range 17 – 340Nm

• Units Nm, inlb, ftlb, kgcm & Deg.
• LED & Buzzer.
• 1/2” Drive
• Digital Torque & Angle Adaptor. NO DEVIATION
33. • 1/2” Drive.
• Complies with ISO 6789, DIN ISO 6789, NF
ISO 6789.
• Torque range 17 – 340Nm.
• High electronic accuracy.
• Torque +/- 3° (between 20% & 100%
capacity).
• – angle +/- 2°.
• Digital display – no risk of reading error.
• Measurement method – ‘Peak’ or ‘Trace’.
17
 • Measurement units – N.M / ft.lb / in.lb /
Kg.cm.
• Keyboard lock – to restrict access to programs
and data.
• Supplied with protective case & calibration
certificate.
• LEDs remain visible – even when access is
difficult.
• self test and automatic reset when switched on.
• Visual and audible indications (LEDs & beeper).

Supply Hand Stamps with the following specifications:

• Made from drawn carbon steel

34. • nickel-plated hand stamps
• chamfered edges to prevent accidental damage NO DEVIATION
to workpiece.
• A-Z set

Supply Hand Stamps with the following specifications:

• Made from drawn carbon steel

35. • nickel-plated hand stamps
• chamfered edges to prevent accidental damage NO DEVIATION
to workpiece.
• Figure 0 - 9

Supply Sledge Hammer with the following

specifications:

• Double faced
36. • fully forged and heat-treated NO DEVIATION
• fibreglass shaft
• Head size: 14lb
• Length 910mm

Supply Professional Reversible Combination Spanners

with the following specifications:

• Bi-hexagonal 15° offset rings with a 72 teeth

lever ratcheting system
37. • Made from high quality Chrome Vanadium
Steel NO DEVIATION
• Mirror polish finish
• Conform to ASME B107.6.
• 9 Pieces Metric: 10, 11, 12, 13, 14, 15, 16, 17
and 19mm.

Supply Flex-Head Ratchet Combination Spanner Set

With Adaptors with the following specifications:

• Bi-hexagonal 15° offset rings with a 72 teeth

lever ratcheting system
38. • Made from high quality Chrome Vanadium
Steel NO DEVIATION
• Mirror polish finish
• Conform to ASME B107.6.
• Flex head ratchet combimation spanners: 10,
11,12, 13, 14, 15, 16, 17 and 19mm.

18
 Supply Screwdriver Bit Socket Set with the following
specifications:

• 20 Piece Set
• 1/2”square drive tooling.
• Manufactured from chrome vanadium steel
• chrome plated with a mirror finish
• aluminium-free to ensure non-sparking.
39. • Should have a ball retaining groove on each
face of the square drive. NO DEVIATION
• Conform to DIN standards.
• Overall length: 55mm.
• Bit length: 20mm.
• Crosspoint: No.2, 3 and 4.
• Hexagon: 4, 5, 6, 7, 8, 10, 12, 14, 17 and
19mm,

Supply Drive Reducers & Adaptors with the following

specifications:

• Male drive – Female drive:

40. • 3/4” x 1/2” NO DEVIATION
• 1/2” x 3/4”
• 1” x 3/4”
• 3/4” x 1”

Supply Hydraulic Bender with the following

specifications:

• Heavy duty bender with 15 tonne pressure ram

41. • Automatic piston return. NO DEVIATION
• For use with 3/8”, 1/2”, 3/4”, 1” 11/4”,
11/2” and 2” diameter steel pipes.
• Supplied in a heavy duty steel carrying case.

Supply a digital single lens reflex camera with the

following specifications:

• 20.9MP DX-Format CMOS Sensor

• EXPEED 5 Image Processor
• 3.2″ 922k-Dot Tilting Touchscreen LCD
42. • 4K UHD Video Recording at 30 fps NO DEVIATION
• Multi-CAM 3500FX II 51-Point AF System
• Native ISO 51200, Expanded ISO 1,640,000
• 8 fps Shooting for Up to 100 Frames
• SnapBridge Bluetooth and Wi-Fi
• 180k-Pixel RGB Sensor and Group Area AF
• AF-S DX 18-140mm f/3.5-5.6G ED VR Lens

Supply Spotting Scope with the following

specifications:

• 25-75x60 Spotting Scope NO DEVIATION

43. • 64in Tripod
• Carry Bag
• Clear Low Light Vision
• Fog proof

Supply Square Frame Level with the following

specifications:
NO DEVIATION
44.
• Two opposing flat bearing surfaces
• two opposing vee surfaces ground to within
0.002mm.
19
 • Manufactured from stabilised cast iron.
• Sensitivity:0.02mm/m (0.0002/10”).

Supply professional corded engraving pen with the

following specifications:

• Rated power input: 35 W

• Voltage: 230 V
• Weight: 0,31 kg
• Strokes per minute:6000
• Length 170mm
• 3 pin british plug
45. • Should engrave a wide variety of materials like NO DEVIATION
metal, glass, wood, plastics, ceramics
• Reciprocating action for optimal engraving
control
• Variable stroke depth for various engraving
effect
• Soft grip for comfortable handling
• Replaceable carbide for use on a wide variety of
materials
• Seperate on/off switch to keep depth setting

Supply Dial gauge with the following specifications;

• 0.01mm graduation
• 10 mm travel
• 58mm Diameter dial
46. NO DEVIATION
• 1/4 “ inside diameter stem
• Chrome finished housing
• Shock proof mechanism

Supply Magnetic Dial gauge stand with the following

specifications;
• Lever switchable type
• Two magnetic faces and large vee
47. • 50kg magnetic pull
NO DEVIATION
• Universal clamp
• Mounts ¼” I/D lug
• Stem/spigot diameter:1/8” , 1/4”

Supply Abrasive mounted points with the following

specifications:
• 24 piece set
48. • For use with drills e.t.c NO DEVIATION
• 3 or 6mm diameter shanks
• Aluminium oxide grade
• Supplied in cases
Supply Adjustable wrench with the following
specifications:
• Graduated jaw
49. • Type 1 class 2
• Drop Forged Chrome Vanadium Steel NO DEVIATION
• Ground and polished parallel gripping jaws
• Adjustable jaw does not fall out at max opening

20
 • Length 360mm

Supply Adjustable wrench with the following

specifications:
• Graduated jaw
• Type 1 class 2
50. NO DEVIATION
• Drop Forged Chrome Vanadium Steel
• Ground and polished parallel gripping jaws
• Adjustable jaw does not fall out at max opening
• Length 150 mm
Supply screw driver set:
• 12 pieces
51. • Mechanics screw drivers
• 75mm,100mm,150mm of crosspoint, NO DEVIATION
pozidriv,parallel and flared tips

Supply rubber mallet:

• Length 300mm NO DEVIATION
52.
• Head dia. 65mm

Supply nylon faced hammer:

53. • Length 300mm NO DEVIATION

Supply solid copper mallet:

54. • Length 300mm NO DEVIATION
Supply Flexible magnetic pick up tool
• With LED
• Flexible aluminum shaft holds shape
• Heavy-duty magnet picks up ferrous metal up NO DEVIATION
55. to 1-1/2 lbs
• 21-1/2" long

Supply Hexagon Allen Key L-Wrench:

• 1.5 mm,2.0 mm,2.5 mm ,3.0 mm ,4.0 mm ,5.0
mm ,6.0mm ,7mm ,8mm 10.mm
• Manufactured from fully hardened carbon steel
in accordance with DIN 911.
56. • A quality ductile key with precision cut ends NO DEVIATION
andaccurate AF dimensional to ensure
maximum socket contact.
• Ball end allows up to 30° work offset.
• Long arm end is ball drive and short arm end
plain. Black oxidised finish.
Supply Torx Keys:
• T6,T7,T8,T9,T10,T15,T20,T27,T30,T40 NO DEVIATION
57. • Manufactured from chrome molybdenum steel

21
 Supply a Bucket grease pump
with the following specifications;
• 10 kg capacity
58. • Direct high pressure lubricating system with NO DEVIATION
centre pump, metal dust cover/lid with integral
stabiliser and fixing mechanism.
• Flexible delivery tube with offset nozzle.
Supply Metric Socket set
with the following specifications;
• Bi- hexagonal socket set 8mm -36mm metric
59. for ½” drive NO DEVIATION
• One swivel handle with ½” drive
• Chrome- vanadium lever, reversible handle
with 72 teeth and ½” drive
Supply HSS Drill bits with the following specifications;
60. • Ground flute drill NO DEVIATION
• 1 to 13mm Dia. In steps of 0.5 mm
Supply Carbide Drill bits with the following
specifications;
61.
• Ground flute drill NO DEVIATION
• 1 to 13mm Dia. In steps of 0.5 mm
Supply Mason Bits with the following specifications;
62. • Ground flute drill NO DEVIATION
• M8,M10,M12,M16,M18,M20

TABLE A
PRICE & SCHEDULE OF REQUIREMENTS
PART 3
No Item Descripition unit Qty Rate Amount
Rqd
Supply a Professional Cordless Nail gun with SET 1 27,550 27,550
the following specifications:
• Collation angle 20 °
• Nail diameter 1.6 mm
• Nail length 32 – 64 mm
• Nail/Staple type
• Finish nail
1 • Triggering system
• Full sequential actuation + contact
actuation with automatic reversion
• Weight excl. battery 2.9 kg
• Battery voltage 18.0 V
• Packaging dimensions (width x length
x height) 295 x 380 x 100 mm
• Supplied with two magazines per set

Supply a Corded Professional Heat Gun with PC 1 12,050 12,050

the following specifications:

• Rated input power 2300 W

• Voltage, electrical 230 V
• Weight 0.67 kgs
.2 • Working temperature 50 – 650 °C
• Airflow 150 – 500 l/min
• Sound power level 76 dB(A)
• Uncertainty K 3 dB
• Glass protection nozzle 75 mm
• Surface nozzle 50 mm
• Welding shoe, 10 mm
22
 • Reflector nozzle, 32 x 33 mm
• Reduction nozzle, 9 mm
• Supplied in a Carrying case

Supply an Orbital Sander with the following PC 1 41,400 41,400

specifications:

• Rated input power 190 W

• Weight 1.5 kg
• No-load speed 12,000 rpm
• No-load orbital stroke rate 24,000
opm
• Orbit diameter 2 mm
3 • Sanding plate, width 92 mm
• Sanding plate, length 182 mm
• Sanding sheet for clamping, width 93
mm
• Sanding sheet for clamping, length
230 mm
• Sanding sheet with hook-and-loop
fastening, width 93 mm
• Sanding sheet with hook-and-loop
fastening, length 185 mm

Supply an Auto Darkening Welding Helmet PC 1 8,000 8,000

with the following specifications:

• Welding Helmet for: TIG MIG MMA

(Gas Tungsten Arc Welding, Metal
Inert Gas Welding, Shielded Metal Arc
Welding)

Auto-Darkening Lens:

• Viewing Size: 3.64″ x 1.67″ (large

viewing area)
• Dual High-Tech Sensors
• Should have fast and accurate
switching from light to dark state
4 (1/30000 sec)
• True color view with 1/1/1/1 optical
clarity for realistic color
representation

Lens Design:

• Cheater Lens Compatible: Allows for

easy addition of corrective lenses for
improved vision during welding
• Magnifying Lens Compatible: Option
to add magnification lenses for
detailed welding tasks
• Extended Battery Life
• Headgear: Pivot style for exceptional
comfort and adjustability

Supply a Laser Measure with the following PC 1 6,200 6,200

specifications:

• Laser diode 635 nm, < 1 mW

• Measurement range 0.15 – 20.00 m
5 • Weight, approx. 0.13 kg
• Measurement time, typical <0.5 s
• Units of measurement m/cm, ft/inch
• Laser class 2
• Measurement accuracy, typical ± 3.0
mmᵈ
• Power supply 2 x 1.5 V LR03 (AAA)
23
 • Automatic deactivation 5 min
• Battery lifetime, individual
measurements, approx. 5,000
• Battery lifetime, operating time,
approx. 5 h
• Laser colour Red
• Measuring range, up to 20 m

Supply a Vernier Height Gauge with the PC 1 37,800 37,800

following specifications:

• Analog
• Supplied with carbide tipped scriber,
scriber clamp
• Range: 0 - 300 mm
6 • Graduation: 0,02 mm
• Max. Permissible Error E MPE:
±0,04 mm
• Fine adjustment: 4 mm
• Scale adjustment: 15 mm
• Inch-Metric: Metric
• Mass: 3.1 kg

Supply a Surface Roughness Tester with the PC 1 67,500 67,500

following specifications:

• X Axis measurement range: 16 mm

• Detection Unit measurement range:
360 μm (-200 to + 160 μm)
• Detector measurement
range/resolution: 360 μm/0.02 μm,
100 μm/0.006 μm, 25 μm/0.002 μm
• Measured speeds: 0.25 mm/s, 0.5
mm/s, 0.75 mm/s
• Measured speed at return: 1 mm/s
• Measurement Force/Stylus tip shape:
0.75 mN/2 μmR 60 °
• Compatible standards: JIS '82, JIS' 94,
JIS '01, ISO' 97, ANSI, VDS
• Evaluation Curves: cross section
Curve, Roughness Curve, DF Curve
and also Chief Roughness Curve
• Parameters: Ra, Rc, Ry, Rz, Rq, Rt,
Rmax, Rp, Rv, R3z, Rsk, Rku, Rc, RPc,
Rsm, Rz1max, S, HSC, RzJIS, Rppi, R △
a, R △ q, Rlr, Rmr, Rmr (c), R δc, Rk,
Rpk, Rvk, Mr 1, M2, A1, A2, Vo, Rpm,
7 tp, Htp, R, Rx, AR Customizable
• analysis brushes: load curve,
amplitude distribution curve
• Filter: Gauussian, 2CR 75, PC 75
• c Cutoff value: 0.08, 0.25, 0.8, 2.5
mm
• cut-off value: 2.5, 8 μm
• Base Length: 0.08, 0.25, 0.8, 2.5 mm
• Number of sections: X1, X2, X3, X4,
X5, X6, X7, X8, X9, X 10, arbitrary
(0.3 to 16.0 mm/0.01 mm interval)
• Liquid Crystal Dimensions (mm): 36.7
x 48.9 mm
• Display language: 16 languages
(Japan, UK, Germany, France, Italy,
Spain, Portugal, Korea, China
(Simplified, Traditional), Czech
Republic, Poland, Hungary, Turkey,
Sweden, Netherlands)
• Arithmetic Result Display: Vertical/1-
Step Display, 3 stages Display, Trace
Display, Horizontal/1-Step Display, 4
stages Display, Trace Display
(Horizontal display can be switched
horizontally.)
24
 • Printing function: measurement
conditions, calculation results,
pass/fail judgment results, calculation
results for each section, evaluation
curves, load curves, amplitude
distribution curves, and environment
setting items
• External Input/Output Function: USB
I/F, Digimatic Output, Printer Output,
RS -232 C I/F, Foot Switch I/F
• Pass/fail judgment function:
maximum value rule, 16% rule,
average value rule
• Saving of measurement conditions:
Saving of conditions when power
supply is OFF
• Storage Function: Built-in Memory/10
Measurement Conditions, Memory
Card (Options)/500 Measurement
Conditions, 10,000 Measurement
Data, 500 Screen Data, Text File
(Measurement
conditions/measurement
data/evaluation curve/load
curve/amplitude distribution curve)
• Calibration: Automatic Calibration
Method with Numeric Input/Average
Calibration Method with Multiple
Measurements (Up to 12 times)
• Power-Saving Features: Auto-Sleep (30
to 600 sec Optional) Feature
• power supply: Integrated Battery (Ni-
MH rechargeable battery), 2 power
supply on AC Adapter
• Built-in battery charge time: approx. 4
hours (It may vary depending on the
ambient temperature.)
• Measurable times (When the internal
battery is fully charged): Approx.
1500 times (May vary depending on
usage conditions, environment, etc.)
• Size: 52.1 x 65.8 x 26 mm (Slide cover
closed, detector not installed)
• Weight cookies : about 500 g
(Arithmetic display unit, drive unit,
and standard detector)
• Accessories: Connection Cable/12
BAA 303, Roughness Standard
Product/178 -601, Carrying Case/12
BAR 344, Calibration Table/12 BAK
700, Display Protection Sheet, AC
Adapter, Operation Manual, One-
Sheet Manual, Warranty

Supply Interchangeable Anvil Type PC 1 37,500 37,500

Micrometers with the following
specifications:

• Range 0 – 150mm
• No of Anvils 6
• No of standards 5
8 • Graduation 0.01mm
• With one-piece carbide tip spindle
• Interchangeable hardened anvils with
ground threads. Micro-lapped anvil
and spindle faces
• Perforated frame with enamel finish.
• Supplied with standards
• Should have ratchet stop, positive
locking clamp

25
 • Supplied in a wooden or plastic
storage case.

Supply Interchangeable Anvil Type PC 1 37,500 37,,500

Micrometers with the following
specifications:

• Range 150 – 300mm

• No of Anvils 6
• No of standards 6
• Graduation 0.01mm
• With one-piece carbide tip spindle
9 • Interchangeable hardened anvils with
ground threads. Micro-lapped anvil
and spindle faces
• Perforated frame with enamel finish.
• Supplied with standards
• Should have ratchet stop, positive
locking clamp
• Supplied in a wooden or plastic
storage case.

Supply Interchangeable Anvil Type PC 1 37,500 37,500

Micrometers with the following
specifications:

• Range 300 – 400mm

• No of Anvils 4
• No of standards 4
• Graduation 0.01mm
• With one-piece carbide tip spindle
10 • Interchangeable hardened anvils with
ground threads. Micro-lapped anvil
and spindle faces
• Perforated frame with enamel finish.
• Supplied with standards
• Should have ratchet stop, positive
locking clamp
• Supplied in a wooden or plastic
storage case.

Supply Interchangeable Anvil Type PC 1 37,500 37,500

Micrometers with the following
specifications:

• Range 400 – 500mm

• No of Anvils 4
• No of standards 4
• Graduation 0.01mm
• With one-piece carbide tip spindle
11 • Interchangeable hardened anvils with
ground threads. Micro-lapped anvil
and spindle faces
• Perforated frame with enamel finish.
• Supplied with standards
• Should have ratchet stop, positive
locking clamp
• Supplied in a wooden or plastic
storage case.

26
 Supply Interchangeable Anvil Type PC 1 50,500 50,500
Micrometers with the following
specifications:

• Range 500 – 600mm

• No of Anvils 4
• No of standards 4
• Graduation 0.01mm
1 • With one-piece carbide tip spindle
• Interchangeable hardened anvils with
2 ground threads. Micro-lapped anvil
and spindle faces
• Perforated frame with enamel finish.
• Supplied with standards
• Should have ratchet stop, positive
locking clamp
• Supplied in a wooden or plastic
storage case.

Supply Interchangeable Anvil Type PC 1 50,500 50,500

Micrometers with the following
specifications:

• Range 600 – 700mm

• No of Anvils 4
• No of standards 4
• Graduation 0.01mm
1 • With one-piece carbide tip spindle
• Interchangeable hardened anvils with
3 ground threads. Micro-lapped anvil
and spindle faces
• Perforated frame with enamel finish.
• Supplied with standards
• Should have ratchet stop, positive
locking clamp
• Supplied in a wooden or plastic
storage case.

Supply Interchangeable Anvil Type PC 1 55,000 55,000

Micrometers with the following
specifications:

• Range 700 – 800mm

• No of Anvils 4
• No of standards 4
• Graduation 0.01mm
1 • With one-piece carbide tip spindle
• Interchangeable hardened anvils with
4 ground threads. Micro-lapped anvil
and spindle faces
• Perforated frame with enamel finish.
• Supplied with standards
• Should have ratchet stop, positive
locking clamp
• Supplied in a wooden or plastic
storage case.

Supply Engineers Steel Rule with the PC 1 12,000 12,000

following specifications:
1 • Tempered stainless steel
5 • Satin chrome
• Anti glare finish with permanent black
figures and graduations
• Rigid blade
27
 • Should have a round end
• Subdivided to 0.5mm and 1 mm
• Should be figured at every 1omm
• Scale type: Metric and Imperial
• Length: 1000 mm

Supply Tapered gauges with the following SET 1 6,700 6,700

specifications:

• Range 1 – 15mm
• Material: Spring tempered steel
16 • Increments of 0.1 mm
• Rustless
• Constant at 20oC
• Satin chrome anti glare finish
• Permanent black figures and
graduations

Supply Tapered gauges with the following SET 1 6,700 6,700

specifications:

• Range 15 – 30 mm
• Material: Spring tempered steel
17 • Increments of 0.1 mm
• Rustless
• Constant at 20oC
• Satin chrome anti glare finish
• Permanent black figures and
graduations

Supply pipe threader / die with the following SET 1 41,800 41,800
specifications:

• Lockable reversible ratchet

18 • Dies material: high quality tempered
steel
• Supplied with case
• Die sizes: ½” , ¾” and 1” ,11/4”,
11/2”,2”

Supply Screw pitch gauge with the following PC 2 4,475 8,950

specifications:

• Manufactured from hardened and

19 polished steel
• precision milled blades
• Range of sizes: Whitworth - 4 - 62
TPI;
• Metric - 0.75 - 6mm; American - 4 -
42 TPI.

Supply Radius gauges with the following SET 1 10,000 10,000

specifications:

• Manufactured from hardened and

20 polished steel
• Precision milled blades
• For measuring internal and external
radii. Enclosed in a steel case.
• Size range:
• 34 Blade Metric: 1.0 to 3.0 x .25 and
• 3.5 to 7.0 x .5

28
 Supply Radius gauges with the following SET 1 9,350 9,350
specifications:

• Manufactured from hardened and

polished steel
21 • Precision milled blades
• For measuring internal and external
radii. Enclosed in a steel case.
• Size range:
• 32 BladeMetric: 7.5 to 15.0 x .5
•
Supply Portable Tool Chest PC 1 102,200 102,200

• Overall dimensions (W x H x D): 520

x 340 x 215mm.
• Three full-length drawers with rigid
aluminium edged

• Heavy gauge steel with all welded

• construction.
• Durable and corrosion-resistant two
part
22
• epoxy powder paint finish.
• With quick release lid clasps, padlock
hasps and textured carry handles.
• Full width piano hinges
• handles.
• Fully lockable unit with a handle on
the top and a carry
• handle on each end. The lid
automatically locks all of the closed
• drawers when lowered to prevent
opening.
Supply 300 Piece Engineers Professional Tool SET 1 298,000 298,000
Kit
• Overall dimensions: 890 x 690 x
460mm.
• five drawer professional roller cabinet
and a three drawer top chest.
• Manufactured from heavy gauge steel
with double wall construction side
panels and welded joints for added
23 rigidity.
• Coated in a hard wearing epoxy
powder. running ball bearing drawer
slides with double sliders on base
drawer
• Fully locking. 125 x 50mm heavy duty
extra strong castors, fitted with two
brakes.
• Castors are rated to 100kg capacity
standing load per castor.

29
 Supply 150 piece Socket & Spanner Tool Box SET 1 130,850 130,850
set
• Should include a collection of sockets,
ratchets, wrenches, bits and universal
joint
2 • Made from premium-quality chrome
4 vanadium steel with a mirror chrome
plated finish.
• 150 PCS set
• Metric and SAE socket sizes combined.
• Provided in a sturdy Case

Supply 90 Piece Workshop Engineer Tool Kit SET 1 71,550 71,550

in Top Tool Chest
Contents:
• Top chest.
• 24 piece 1/2" drive metric socket set.
• Six piece 16cm cut 2 assorted needle file set.
• 10x 12" x 1/2"x 18tpi all hard hacksaw
blades.
• 8"/200mm chrome vanadium adjustable
spanner.
• 12" rule - walleted.
• Metric/inch feeler gauge 60mm blade
length.
• 11/2lb ball pein hammer- hickory shaft.
• 16oz black rubber mallet - wood shaft.
2 • 5m/16ft locking tape rule - chromed case.
5 • Eight segment 18mm heavy duty snap-off
blade knife.
• Retractable trimming knife.
• DIY hacksaw.
• 2x 50mm G-clamps.
• 2x 100mm G-clamps.
• 6" snipe nose plier/side cutter.
• 8" straight blade tinsnip.
• 6" diagonal cutting nipper.
• 7" linesman's pliers.
• 10" multiple slip joint pliers.
• 10" straight jaw high strength grip wrench.
• 16 function 10-blade tool.
• 15 piece dual grip screwdriver set.
• 14 piece 6 - 19mm drop forged combination
spanner set.
Supply Blade Feeler Gauges with the SET 1 6,800 6,800
following specifications:

2 • Hardened and polished taper blades

6 • Blades are clearly marked.
• Length 500mm
• Range 0.05 -1mm.

Supply Automatic Center Punches with the PC 1 4,2000 4,200

following specifications:
2
7 • Heavy Duty
• Strength of punch and depth of
depression is adjustable byturning the
knurled head.
30
 • Delivers a punch between 6.3 to
22.5kg (14 to 50lb).Range 0.05 -
1mm.
• Length 149 mm

Supply Surveyors Tape Measure with the PC 1 2,400 2,400

following specifications:

• Fibreglass blade.
• Robust ABS open frame and winding
handle.
2 • Folding end claw.
8 • Strong and lightweight
• Double
• Marking spike
• Large ‘D’ type handle with rubber.
• Manufactured within the tolerance of
EEC Class II

Supply Road Measuring Wheel with Carry PC 1 8,400 8,400

Case with the following specifications:

• Gear driven 5-digit counter

mechanism
29 • Weather resistant housing,
• ‘exact’ point indicator, trigger
• operated brake
• spring loaded kickstand
• two reset buttons

Supply Snap-off Blade Retractable Knives with PC 1 1,450 1,450

the following specifications:

30 • High strength ABS plastic construction

with slider lock.
• Standard: 160mm. 18 x 100mm, 8
segment blade.

Supply Extra Heavy-duty G-Clamps with the PC 2 4,200 4,200

following specifications:

• Manufactured from drop forged Steel

31 • Ribbed anti-twist frame
• Capacity 300 mm
• Throat depth 130 mm
• Handle and swivel shoes.

Supply Hydraulic Grease Nipple Kit with the SET 1 6,000 6000
following specifications:

• 120 piece set

• made of precision steel
• zinc plated
• hardened
• blue chromed
32 • 6x1 straight 30 pcs
• M8x1 straight 20 pcs
• M10x1 straight 10 pcs
• G 1/8 straight 10 pcs
• M6x1 45° 5 pcs
• M8x1 45° 10 pcs
• M10x1 45° 5 pcs
• G 1/8 45° 5 pcs
• M6x1 90° 5 pcs
31
 • M8x190° 10 pcs
• M10x1 90°5 pcs
• G 1/8 90° 5 pcs

Supply Digital Torque and Angle Adapter PC 1 21,100 21,100

with the following specifications:

• Torque range 17 – 340Nm

• Units Nm, inlb, ftlb, kgcm & Deg.
• LED & Buzzer.
• 1/2” Drive
• Digital Torque & Angle Adaptor.
• 1/2” Drive.
• Complies with ISO 6789, DIN ISO
6789, NF ISO 6789.
• Torque range 17 – 340Nm.
• High electronic accuracy.
• Torque +/- 3° (between 20% & 100%
capacity).
3 • – angle +/- 2°.
• Digital display – no risk of reading
3 error.
• Measurement method – ‘Peak’ or
‘Trace’.
• Measurement units – N.M / ft.lb /
in.lb / Kg.cm.
• Keyboard lock – to restrict access to
programs and data.
• Supplied with protective case &
calibration certificate.
• LEDs remain visible – even when
access is difficult.
• self test and automatic reset when
switched on.
• Visual and audible indications (LEDs &
beeper).

Supply Hand Stamps with the following SET 1 4,050 4,050

specifications:

3 • Made from drawn carbon steel

• nickel-plated hand stamps
4 • chamfered edges to prevent accidental
damage to workpiece.
• A-Z set

Supply Hand Stamps with the following SET 1 4,050 4,050

specifications:

• Made from drawn carbon steel

35 • nickel-plated hand stamps
• chamfered edges to prevent accidental
damage to workpiece.
• Figure 0 - 9

Supply Sledge Hammer with the following PC 1 2,500 2,500

specifications:
36 • Double faced
• fully forged and heat-treated
• fibreglass shaft
• Head size: 14lb

32
 • Length 910mm

Supply Professional Reversible Combination SET 1 12,0000 12,000

Spanners with the following specifications:

• Bi-hexagonal 15° offset rings with a

72 teeth lever ratcheting system
37 • Made from high quality Chrome
Vanadium Steel
• Mirror polish finish
• Conform to ASME B107.6.
• 9 Pieces Metric: 10, 11, 12, 13, 14,
15, 16, 17 and 19mm.

Supply Flex-Head Ratchet Combination SET 1 16,200 16,200

Spanner Set With Adaptors with the
following specifications:

• Bi-hexagonal 15° offset rings with a

72 teeth lever ratcheting system
38 • Made from high quality Chrome
Vanadium Steel
• Mirror polish finish
• Conform to ASME B107.6.
• Flex head ratchet combimation
spanners: 10, 11,12, 13, 14, 15, 16,
17 and 19mm.

Supply Screwdriver Bit Socket Set with the SET 1 2,150 2,150
following specifications:

• 20 Piece Set
• 1/2”square drive tooling.
• Manufactured from chrome vanadium
steel
• chrome plated with a mirror finish
• aluminium-free to ensure non-
39 sparking.
• Should have a ball retaining groove on
each face of the square drive.
• Conform to DIN standards.
• Overall length: 55mm.
• Bit length: 20mm.
• Crosspoint: No.2, 3 and 4.
• Hexagon: 4, 5, 6, 7, 8, 10, 12, 14, 17
and 19mm,

Supply Drive Reducers & Adaptors with the SET 1 7,650 7,650
following specifications:

• Male drive – Female drive:

40 • 3/4” x 1/2”
• 1/2” x 3/4”
• 1” x 3/4”
• 3/4” x 1”

33
 Supply Hydraulic Bender with the following SET 1 30,OOO 30,000
specifications:

• Heavy duty bender with 15 tonne

pressure ram
4 • Automatic piston return.
1 • For use with 3/8”, 1/2”, 3/4”, 1”
11/4”, 11/2” and 2” diameter steel
pipes.
• Supplied in a heavy duty steel carrying
case.

Supply a digital single lens reflex camera with SET 1 153,450 153,450
the following specifications:

• 20.9MP DX-Format CMOS Sensor

• EXPEED 5 Image Processor
• 3.2″ 922k-Dot Tilting Touchscreen
LCD
• 4K UHD Video Recording at 30 fps
• Multi-CAM 3500FX II 51-Point AF
42 System
• Native ISO 51200, Expanded ISO
1,640,000
• 8 fps Shooting for Up to 100 Frames
• SnapBridge Bluetooth and Wi-Fi
• 180k-Pixel RGB Sensor and Group
Area AF
• AF-S DX 18-140mm f/3.5-5.6G ED
VR Lens

Supply Spotting Scope with the following PC 1 33,600 33,600

specifications:

43 • 25-75x60 Spotting Scope

• 64in Tripod
• Carry Bag
• Clear Low Light Vision
• Fog proof

Supply Square Frame Level with the following PC 1 58,400 58,400

specifications:

• Two opposing flat bearing surfaces

44 • two opposing vee surfaces ground to
within 0.002mm.
• Manufactured from stabilised cast
iron.
• Sensitivity:0.02mm/m (0.0002/10”).

Supply professional corded engraving pen

with the following specifications: PC 1 6,200 6,200
• Rated power input: 35 W
• Voltage: 230 V
• Weight: 0,31 kg
45 • Strokes per minute:6000
• Length 170mm
• 3 pin british plug
• Should engrave a wide variety of
materials like metal, glass, wood,
plastics, ceramics
• Reciprocating action for optimal
engraving control

34
 • Variable stroke depth for various
engraving effect
• Soft grip for comfortable handling
• Replaceable carbide for use on a wide
variety of materials
• Seperate on/off switch to keep depth
setting

Supply Dial gauge with the following PC 2 2,800 5,600

specifications;
• 0.01mm graduation
• 10 mm travel
46 • 58mm Diameter dial
• 1/4 “ inside diameter stem
• Chrome finished housing
• Shock proof mechanism

Supply Magnetic Dial gauge stand with the PC 2 2,300 4,600

following specifications;
• Lever switchable type
• Two magnetic faces and large vee
47 • 50kg magnetic pull
• Universal clamp
• Mounts ¼” I/D lug
• Stem/spigot diameter:1/8” , 1/4”

Supply Abrasive mounted points with the SET 1 6,000 6,000

following specifications:
• 24 piece set
48 • For use with drills e.t.c
• 3 or 6mm diameter shanks
• Aluminium oxide grade
• Supplied in cases
Supply Adjustable wrench with the following PC 1 2,900 2,900
specifications:
• Graduated jaw
• Type 1 class 2
• Drop Forged Chrome Vanadium Steel
49
• Ground and polished parallel gripping
jaws
• Adjustable jaw does not fall out at max
opening
• Length 360mm
Supply Adjustable wrench with the following PC 1 3,200 3,200
specifications:
• Graduated jaw
• Type 1 class 2
• Drop Forged Chrome Vanadium Steel
50
• Ground and polished parallel gripping
jaws
• Adjustable jaw does not fall out at max
opening
• Length 150 mm

35
 Supply screw driver set: SET 1 3,700 3,700
• 12 pieces
51 • Mechanics screw drivers
• 75mm,100mm,150mm of crosspoint,
pozidriv,parallel and flared tips

Supply rubber mallet: PC 1 1,200 1,200

• Length 300mm
52
• Head dia. 65mm

Supply nylon faced hammer: PC 1 1,550 1,550

53 • Length 300mm

Supply solid copper mallet: PC 1 1,600 1,600

54 • Length 300mm
Supply Flexible magnetic pick up tool PC 1 1,700 1,700
• With LED
• Flexible aluminum shaft holds shape
• Heavy-duty magnet picks up ferrous
55 metal up to 1-1/2 lbs
• 21-1/2" long

Supply Hexagon Allen Key L-Wrench: SET 1 3,200 3,200

• 1.5 mm,2.0 mm,2.5 mm ,3.0 mm ,4.0
mm ,5.0 mm ,6.0mm ,7mm ,8mm
10.mm
• Manufactured from fully hardened
carbon steel in accordance with DIN
56 911.
• A quality ductile key with precision
cut ends andaccurate AF dimensional
to ensure maximum socket contact.
• Ball end allows up to 30° work offset.
• Long arm end is ball drive and short
arm end plain. Black oxidised finish.
Supply Torx Keys: SET 1 3,350 3,350
• T6,T7,T8,T9,T10,T15,T20,T27,T30,T4
57 0
• Manufactured from chrome
molybdenum steel
Supply a Bucket grease pump PC 1 6,800 6,800
with the following specifications;
• 10 kg capacity
• Direct high pressure lubricating
58 system with centre pump, metal dust
cover/lid with integral stabiliser and
fixing mechanism.
• Flexible delivery tube with offset
nozzle.

36
 Supply Metric Socket set SET 1 20,200 20,200
with the following specifications;
• Bi- hexagonal socket set 8mm -36mm
59 metric for ½” drive
• One swivel handle with ½” drive
• Chrome- vanadium lever, reversible
handle with 72 teeth and ½” drive
Supply HSS Drill bits with the following SET 1 3,400 3,400
specifications;
60
• Ground flute drill
• 1 to 13mm Dia. In steps of 0.5 mm
Supply Carbide Drill bits with the following SET 1 5,700 5,700
specifications;
61
• Ground flute drill
• 1 to 13mm Dia. In steps of 0.5 mm
Supply Mason Bits with the following SET 1 3,000 3,000
specifications;
• Ground flute drill
62 • M8,M10,M12,M16,M18,M20

N/B: BROCHURES MUST BE ATTACHED

CLEARLY INDICATING THE QUOTED ITEM
SUB-TOTAL 1,671,300/=
ADD 16% VAT 267,408
GRAND TOTALS INCLUSIVE OF 16% VAT 1,938,708/=

NOTE: Public Procurement Capacity Building Levy Order, 2023.

Notice is also brought to the attention of all bidders of the Public Procurement
Capacity Building Levy Order, 2023 vide Legal Notice No.206 whose
commencement date is 1st September 2024 that requires procuring entities to
deduct and remit to the Public Procurement Regulatory Authority, a sum
equivalent to 0.03% of the value of the resultant signed contract, exclusive of
applicable taxes.
Signature:
Stamp

Name
Authorized for and on behalf of AISHA HUSSEIN ADAWA Date 16/05/2025

37
FORM FOR DISCLOSURE OF INTEREST
Interest of the Firm in the Procuring Entity.

i) Are there any person/persons in Kenya Electricity Generating Company

PLC who has/have an interest or relationship in this firm?

Yes/No……………NO……………………………………………………

If yes, provide details as follows.

NONE NONE NONE

ii) CONFLICT OF INTEREST DISCLOSURE

NO N/A

NO N/A

NO N/A

NO N/A

NO N/A

38
 YES IF GIVEN THE TENDER

NO N/A

NO N/A

NO N/A

iii) CERTIFICATION

On behalf of the Tenderer, I certify that the information given above is complete, current
and accurate as at the date of submission.

Full Name : AISHA HUSSEIN ADAWA 16/05/2025

(Signature) (Date)

39
 iv) CERTIFICATE OF INDEPENDENT QUOTATION DETERMINATION

I, the undersigned, in submitting the accompanying quotation form to the General

Manager Supply Chain Kenya Electricity Generating Company PLC for
RFX NO. 50000 SMED TOOLS FOR SAGANA POWER STATIONin response to the
request for quotation made by General Manager Supply Chain Kenya Electricity
Generating Company PLC (Name of procuring Entity) do hereby make the following
statements that I certify to be true and complete in every respect:

I certify, on behalf of ADOW WHOLESALERS LTD .(Name of Tenderer) that:

1. I have read and I understand the contents of this Certificate;

2. I understand that the Tenderer will be disqualified if this Certificate is

found not to be true and complete in every respect;

3. I am the authorized representative of the Tenderer with authority to sign

this Certificate, and to submit the quotation on behalf of the Tenderer;

4. For the purposes of this Certificate and the quotation, I understand that the
word “competitor” shall include any individual or organization, other
than the Tenderer, whether or not affiliated with the Tenderer, who:

a) has been requested to submit a quotation in response to this request for

quotations;
b) could potentially submit a quotation in response to this request for
quotations based on their qualifications, abilities or experience;

5. The Tenderer discloses that they have arrived at the quotation

independently from and without consultation communications
agreements or arrangements with one or more competitors.

Name : AISHA HUSSEIN ADAWA

Date :16/05/2025 ADOW WHOLESALERS LTD .
Name of tenderer and Date]

v) CERTIFICATION
On behalf of the Tenderer, I certify that the information given above is complete, current and
accurate as at the date of submission.

FullName AISHA HUSSEIN ADAWA

Title or Designation DIRECTOR 16/05/2025.

…………………………………………. …………………………………….
(Signature) (Date)
V) SELF-DECLARATION FORM

We, the Tenderer ADOW WHOLESALERS LTD .[ (Insert Name) submitting our
Quotation in respect of Quotation No. RFX NO. 50000for SMED TOOLS FOR
SAGANA POWER STATION(Item Description) for Kenya Electricity
40
 Generating Company PLC

DECLARE AS FOLLOWS:

That, We the Tenderer including any entity or individual that directly or indirectly
controls, is controlled by or is under common control with us, and any
subcontractors, suppliers, project managers, consultants, manufacturers, service
providers, agents, individuals, or any other party involved or to be involved for any
part of the processes of procurement and contract execution related to the above
quotation:

a) have not engaged/will not engage in any corrupt or fraudulent practices

in the processes of procurement and contract execution related to the
above quotation as defined and/or described in the following:

i) the RFQ for the above Quotation;

ii) Kenya's Public Procurement and Asset Disposal Act, 2015) and its attendant
Regulations;

iii) Kenya's Anti-Corruption and Economic Crimes Act, 2013; and

iv) any such other Acts or Regulations of Government of Kenya;

b) have not offered/will not offer any inducement to any member of the
board, management, staff and/or employees and/or agents of Kenya
Electricity Generating Company PLC

c) have not engaged/will not engage in any collusive or corrosive practice

with other tenderers participating in the subject quotation;

d) have not been sanctioned or debarred by any entity from participation in

public procurement proceedings of Kenya.

That, what is declared above is true to the best of our knowledge, information and
belief.

Name of the Tenderer: ADOW WHOLESALERS LTD

Name of the person duly authorized to sign the quotation on behalf of the
Tenderer AISHA HUSSEIN ADAWA:

Signature of the person named above: ....................[insert signature of person

whose name capacity are shown above]

PART 3: CONTRACT
41
I) CONDITIONS OF CONTRACT
1. Language
The Contract as well as all correspondence and documents relating to the Contract exchanged
by the Supplier/Contractor/Service Provider and the Procuring Entity, shall be written in the
English Language.
2. Eligibility
The goods shall have the nationality of an eligible country. All Goods and Related Services to be
supplied under the Contract shall have their origin in Eligible Countries.
3. Notices
Any notice given by one party to the other pursuant to the Contract shall be in writing.
4. Governing Law
The Contract shall be governed by and interpreted in accordance with the Laws of Kenya, unless
otherwise specified hereunder.
5. Settlement of Disputes
The Procuring Entity and the Supplier/Contractor/Service shall make every effort to resolve
amicably by direct informal negotiation any disagreement or dispute arising between them
under or in connection with the Contract. If the parties have failed to resolve their dispute or
difference by such mutual consultation, either the Procuring Entity or the
Supplier/Contractor/Service may give notice to the other party of its intention to commence
arbitration. The dispute shall be referred to adjudication or arbitration in accordance with the
laws of Kenya.
6. Supplier/Contractor/Service Provider Responsibilities
The Supplier/Contractor/Service Provider shall carry out the works as per the schedule of
requirements.
7. Contract Price
Prices charged by the Supplier/Contractor/Service Provider under the Contract shall not vary
from the prices quoted by the Supplier/Contractor/Service Provider in its quotation.
8. Terms of Payment
The Contract Price shall be paid One hundred (100) percent of the Contract Price as
goods/services/works, upon valuation by the Contractor of the portion of the works completed,
such valuation to be accepted by the Procuring Entity, payments up to final completion
certificate.
9. Inspections and Tests
The Supplier/Contractor/Service Provider shall at its own expense and at no cost to the
Procuring Entity carry out all such tests and/or inspections of the Goods, works or Services to
confirm their conformity to technical specifications.
10. Warranty
The Supplier warrants that all the Goods are new, unused, and of the most recent or current
models, and that they incorporate all recent improvements in design and materials, unless
provided otherwise in the contract.

42
II) CONTRACT AGREEMENT

1. THIS CONTRACT AGREEMENT is made (specify date). Between

Kenya Electricity Generating Company Plc and having its principal place of Business at Stima Plaza Phase III,
Kolobot Road, Parklands and ……………………………………….and having its principal place of
business at ……………………………………….

2.WHEREAS the Procuring Entity invited quotations for goods/services/works

described in the quotation document, i.e.
………………………………………………………………………….and has accepted
a Quotation by the Tenderer in the sum
of……………………………………………………………………………. [insert
Contract Price in words and figures] (hereinafter called “the Contract Price”).

3. NOW THIS AGREEMENT WITNESSED AS FOLLOWS:

1. This Contract Agreement includes the following documents:

a) SCHEDULE OF REQUIREMENTS AND TECHNICAL SPECIFICATIONS.

b) QUOTATION SUBMISSION TABLE.

c) FORM OF QUOTATION.

d) Conditions of Contract.

2. In consideration of the payments to be made by the Procuring Entity to the

Contractor as hereinafter mentioned, the Contractor hereby covenants with the
Procuring Entity to provide the Goods/works/services and to remedy defects
therein in conformity in all respects with the provisions of the Contract.

3. The Procuring Entity hereby covenants to pay the Contractor in consideration of

the provision of the works and the remedying of defects therein, the Contract Price
or such other sum as may become payable under the provisions of the Contract at
the times and in the manner prescribed by the Contract.

4. In WITNESS whereof the parties hereto have caused this Agreement to be executed
in accordance with the laws of Kenya.

43
For and on behalf of the Procuring Entity

Signed: ...................................................................................................................................................

In the capacity of......................................................................................................................................

In the presence of....................................................................................................................................

Signed: ....................................................................................................................................................

For and on behalf of the Contractor

Signed: ...................................................................................................................................................

In the capacity

of......DIRECTOR........................................................................................................................................

In the presence of.....................................................................................……………………………

Signed: ....................................................................................................................................................

44
 No. PVT-9XUQE22

CERTIFICATE OF INCORPORATION

I hereby CERTIFY that,

ADOW WHOLESALERS LTD

is on this date 29 Jul 2020 Incorporated under the Companies Act, 2015 and that the Company is a
PRIVATE LIMITED COMPANY.

............................................................................

Registrar Of Companies

This is a system generated certificate. To validate this document send the word BRS to 21546
 For General Tax Questions
Contact KRA Call Centre
PIN Certificate Tel: +254 (020) 4999 999
Cell: +254(0711)099 999
Email: [email protected]

www.kra.go.ke

Certificate Date : 29/07/2020

Personal Identification Number
P051926368Z

This is to certify that taxpayer shown herein has been registered with Kenya Revenue Authority

Taxpayer Information
Taxpayer Name ADOW WHOLESALERS LTD
Email Address [email protected]

Registered Address
L.R. Number : NA Building St Ellis House
Street/Road WABERA STREET City/Town : NA
County : Nairobi District Starehe District
Tax Area CBD Station North of Nairobi
P. O. Box 218 Postal Code 00610

Tax Obligation(s) Registration

Sr. Tax Obligation(s) Effective Date
1 Income Tax - PAYE 29/07/2020
2 Income Tax - Company 29/07/2020

The above PIN must appear on all your tax invoices and correspondences with Kenya Revenue Authority. Your
accounting end month is December unless a change has been approved by the Commissioner-Domestic Taxes
Department. The status of Tax Obligation(s) with 'Dormant’ status will automatically change to 'Active' on date
mentioned in "Effective Till Date" or any transaction done during the period. This certificate shall remain in force
till further updated.

Disclaimer : This is a system generated certificate and does not require signature.
 For General Tax Questions
Contact KRA Call Centre
PIN Certificate Tel: +254 (020) 4999 999
Cell: +254(0711)099 999
Email: [email protected]

www.kra.go.ke

Certificate Date : 28/11/2022

Personal Identification Number
A019069329Z

This is to certify that taxpayer shown herein has been registered with Kenya Revenue Authority

Taxpayer Information
Taxpayer Name AISHA HUSSEIN ADAWA
Email Address [email protected]

Registered Address
L.R. Number : Building : EASTLEIGH
Street/Road : 12TH STREET City/Town : NAIROBI
County : Nairobi District : Kamukunji District Nairobi
Tax Area : Kamukunji Station : East of Nairobi
P. O. Box : 61 Postal Code : 00200

Tax Obligation(s) Registration Details

Sr. No. Tax Obligation(s) Effective From Date Effective Till Date Status
Income Tax - Resident
1 28/11/2022 N.A. Active
Individual

The above PIN must appear on all your tax invoices and correspondences with Kenya Revenue Authority. Your
accounting end date is 31st December as per the provisions stated in the Income Tax Act unless a change has
been approved by the Commissioner-Domestic Taxes Department.The status of Tax Obligation(s) with
'Dormant’ status will automatically change to 'Active' on date mentioned in "Effective Till Date" or any
transaction done during the period. This certificate shall remain in force till further updated.

Disclaimer : This is a system generated certificate and does not require signature.
 BUSINESS REGISTRATION SERVICE
P. O. BOX 30031
NAIROBI
11 FEB 2025

To
AISHA ADAWA HUSSEIN
P.O. Box 218
00610 - EASTLEIGH

THE COMPANIES ACT, 2015

Records relating to the below company held by the Companies Registry as at 11 Feb 2025

..
COMPANY ADOW WHOLESALERS LTD
COMPANY NUMBER PVT-9XUQE22
NOMINAL SHARE CAPITAL 100,000.00
NUMBER AND TYPE OF SHARES (VALUE PER SHARE) ORDINARY: 1000 (KES 100.00 EACH)
DATE OF REGISTRATION 29TH JUL, 2020
P.O BOX 218 EASTLEIGH
TELEPHONE: +254722322272, EMAIL:
[email protected]
REGISTERED OFFICE
COUNTY: NAIROBI, DISTRICT: STAREHE DISTRICT ,
LOCALITY: CBD
STREET: WABERA STREET, BUILDING: ST ELLIS HOUSE
POSTAL ADDRESS P.O BOX 218 EASTLEIGH
ENCUMBRANCES

Name of Directors and Shareholders of the above company with their particular are as follows

NAME DESCRIPTION ADDRESS NATIONALITY SHARES

P.O BOX 218 ORDINARY:
AISHA HUSSEIN ADAWA DIRECTOR/SHAREHOLDER KENYAN
EASTLEIGH 700
ABDIRAHMAN MOHAMED P.O BOX 218 ORDINARY:
DIRECTOR/SHAREHOLDER KENYAN
AHMED EASTLEIGH 300
TOTAL 1000

Yours Faithfully,
REGISTRAR OF COMPANIES
REF NO: OS-9AFEKEQ6

DISCLAIMER: THIS IS A SYSTEM GENERATED CERTIFICATE AND DOES NOT REQUIRE A SIGNATURE
NT/PPD/2025/DGW/2973 VALID UNTIL: 05/03/2027
(WOMEN)
M/s ADOW WHOLESALERS LTD PVT-9XUQE22
218 00610 EASTL 5TH MARCH 2025
BRONCHURES
Product data sheet
Power tools for trade & industry

Cordless Wood Nailer

GNH 18V-64 M

Quick and precise fastening: finish nailer with single and

contact firing modes

The most important data

Nail length 32 – 64 mm
Nail diameter 1.6 mm
Triggering system Bottom fire mode

Part Number 0 601 481 070

> More product information

Technical data Noise/vibration information

Technical data Fastening in wood
Collation angle 20 ° Vibration emission value ah 2.5 m/s²
Nail diameter 1.6 mm Uncertainty K 1.5 m/s²
Nail length 32 – 64 mm
Nail type Brad head nail
Triggering system Bottom fire mode
Weight excl. battery 2.9 kg
Battery voltage 18.0 V
Magazine capacity 105 Pcs
Packaging dimensions (width x length x 360 x 440 x 155 mm
height)
Battery capacity 4 Ah

© Robert Bosch GmbH www.bosch-professional.com 28.04.2023 Page 1 of 2

Product data sheet
Power tools for trade & industry

Advantages:
■ Maximum freedom – no air hose, compressor or
expensive gas cartridge needed
■ Wood protection by preventing blank firing with empty nail
magazine
■ Easy activation of firing modes through intuitive User
Interface (HMI)

© Robert Bosch GmbH www.bosch-professional.com 28.04.2023 Page 2 of 2

Product data sheet
Power tools for trade & industry

Heat Gun

GHG 23-66 Professional GBP 162.35*

* Price including VAT

Complete temperature and airflow control for demanding

applications

Part number: 0 601 2A6 300

> More product information

Technical Data Noise/vibration information

webshop-pdp-section-technical-data-table-key- Noise
Battery and power Sound pressure level 70 dB(A)
Rated input power 2.300 W

webshop-pdp-section-technical-data-table-key-
Size and weight
Weight 0,7 kg
Tool dimensions (width) 86 mm
Tool dimensions (length) 245 mm
Tool dimensions (height) 201 mm

© Robert Bosch GmbH www.bosch-professional.com 11.10.2019 Page 1 of 2

Product data sheet
Power tools for trade & industry

Advantages
■ 10 airflow rates, digitally adjustable temperature settings,
and 4 customizable programs for total tool control
■ Incredibly strong 2300 W motor to quickly reach 650 °C
■ Enhanced Safety thanks to the thermal protection:
Automatic shut-off of the heating element in case of motor
overheating

© Robert Bosch GmbH www.bosch-professional.com 11.10.2019 Page 2 of 2

0 601 298 0F0 – GSS 2300

Material number 0 601 298 0F0

EAN 3165140783996

3 sanding sheets ✓

Carton box ✓

Technical data

Technical data

Rated input power 190 W

No-load speed 12,000 rpm

No-load orbital stroke rate 24,000 opm

Orbit diameter 2,0 mm

Weight 1,5 kg

Product category subdivision Orbital Sander

Sanding surface

Sanding plate, width 92 mm

Sanding plate, length 182 mm

Sanding sheet for clamping, width 93 mm

Sanding sheet for clamping, length 230 mm

Sanding sheet with hook-and-loop fastening, 93 mm

width

Sanding sheet with hook-and-loop fastening, 185 mm

length

Noise/vibration information

Noise level The A-rated noise level of the

power tool is typically as
follows: Sound pressure level
dB(A); Sound power level dB
(A). Uncertainty K= dB.

Bosch Power Tools | © Bosch Limited | 10.05.2023

0 601 298 0F0 – GSS 2300

Sales information

Positioning
Robust design for easy, fatigue-free sanding over long hours

User benefit
Easy and robust clamping system, sanding plate, bearings and vibration foot to improve working efficiency
Ergonomic handle, optimised tool height, counterweight for less vibration to ensure comfortable working
Metal sheet for better sanding result

Bosch Power Tools | © Bosch Limited | 10.05.2023

O’PANTHER / O’RACING
65 040 778 / 65 040 751

Auto-darkening welding helmet

Benefits Description
• Liquid crystal auto-darkening welding helmet
• Clear vision: 4 sensors
(digital display)
• Power supply: solar and batteries
• 4 sensors
• Wide field of vision
• Clear vision
• Automatic darkening
• Adjustable sensitivity for improved arc detection
• Suits any type of processes of welding,
• The shade of the dark filter can be adjusted from
cutting and grinding
5-9 to 9-13
• Adjustable delay settings
• Headgear with 3-point spanner adjuster and sweatband
• Low battery indicator
• Delivered with 3 outside cover lenses
• Supplied with 2 batteries (lithium CR 2450)

Uses Technical features

• For MMA welding, TIG, MIG, plasma cutting and grinding Optical class 1/1/1/1
Reaction time light to dark 0.10 ms
Reaction time dark to light 0.1 - 0.8 s

Standards Viewing surface 6000 mm2 (100 x 60 mm)

Filter cartridge 133 x 114 x 10 mm
EN 175
EN 379 Power supply solar and battery
EN 166
Power on/off fully automatic
Impact resistance F
UV/IR protection fully automatic
Warranty Protection level in light mode DIN 4
• 3-year warranty Protection level in dark mode DIN 5-9 / 9-13
Operating temperature -5°C / +55°C

Replacement accessories Storage temperature -20°C / +70°C

Weight 535 g
Accessoires Code
SOGEDESCA - Version : Avril 2024

Outside cover lens - Pack of 3 65 040 786

Inside cover lens - Pack of 3 65 040 794
Sweatband - Pack of 2 65 040 808
Headgear 65 040 816

YOUR SAFETY, YOUR PERFORMANCE

MEASURING TOOLS
PRODUCT CATALOGUE
2022
Bosch Professional

www.bosch-professional.com/za/en/
LEVEL UP YOUR
LEVELLING.
Bosch Professional levelling tools give you convenience and exactness for
any levelling task in construction – even on larger distances. They minimize
effort, maximize efficiency and lift your performance to a new level.
Find out more at www.bosch-professional.com/levelling/

It’s in your hands. Bosch Professional Measuring Tools. Measuring Tools Catalogue | 6
 Laser Measure Laser Measure
GLM 20
​ GLM 40
​

Distance measurement – easy, compact, Distance measurement – easy, compact,

for professionals for professionals
• Compact one button laser measure, measuring • Laser measure that measures up to 40m with
up to 20m basic functions such as add and subtract, area
• One button for everything – intuitive and easy and volume
measuring • Maximum readability due to illuminated, three
• Measure and Capture – Holds one measurement line display
while taking another • Memory function enables easy access to the
• Functions: Length, Continues Measurements last ten measurements
• Functions: Length, Area, Volume, Add/Subtract
values, Continuous, Indirect Height, Memory

Technical data Technical data

Measurement range: 0.15 – 20.00 m Measurement range: 0.15 – 40.00 m

Weight, approx: 0.13 kg Weight, approx: 0.09 kg
Measurement time, typical: <0.5 s Measurement time, typical: < 0.5 s

Units of measurement: m/cm, ft/inch Laser diode: 635 nm, < 1 mW

Laser class: 2
Laser diode: 635 nm, < 1 mW
Measurement accuracy, typical: ± 1.5 mm
Laser class: 2
Measurement time, max: 4 s
Measurement accuracy, typical: ±3.0 mm
Power supply: 2 x 1.5 V LR03 (AAA)
Power supply: 2 x 1.5 V LR03 (AAA)
Automatic deactivation: 5 min
Automatic deactivation: 5 min
Units of measurement: m/cm, ft/inch
Power supply: 2 x 1.5 V LR03 (AAA) Memory capacity (values): 10
Automatic deactivation: 5 min Dust and splash protection: IP 54
Battery lifetime, individual measurements,
approx: 5,000
Battery lifetime: 5 h

Scope of supply Scope of supply

GLM 20 GLM 40
Manufacturer’s certificate 2 x 1.5 V LR03 (AAA) batteries
2 x 1.5 V LR03 (AAA) batteries Manufacturer’s certificate
Protective bag

Part Number: 0601072EG0 Part Number: 0601072900

Bar Code: 3165140871105 Bar Code: 3165140790406

7 | Measuring Tools Catalogue

Laser Measure Laser Measure
GLM 50 - 22
​ GLM 50 -25 G

The smart solution for measuring and The smart solution for measuring and
documenting with durable design documenting with durable design
• Robust Design to Withstand Rough Jobsites - • Robust Design to Withstand Rough Jobsites -
Reinforced housing for brutal applications + IP Reinforced housing for brutal applications + IP
65 Protection 65 Protection
• Functions: Length, Area, Volume, Add/Subtract • Greater Visibility for Even Faster Targeting
values, Continuous, Indirect, Wall Surface, • Green laser that can be seen better than red
Digital Spirit Level, Memory, Tape Measure laser
• Big Numbers Mode for fast and easy • Vibration Feedback - for successful and failed
readability:Large measurement result, fading measurement. Great if display is out of sight, or
out everything else on the display on loud construction sites
• Favourite Button for individual user • Functions: Length, Area, Volume, Add/Subtract
preference:Customizable button for a shortcut values, Continuous, Indirect, Wall Surface,
to a specific measuring function or setting Digital Spirit Level, Memory, Tape Measure

Technical data Technical data

Measurement range: 0.05 – 50.00 m Measurement range: 0.05 – 50.00 m

Weight, approx: 0.17 kg Weight, approx: 0.17 kg
Measurement time, typical: < 0.5 s Measurement time, typical: < 0.5 s
Units of measurement: m/cm, ft/inch Units of measurement: m/cm, ft/inch
Laser diode: 515 nm, < 1 mW Laser diode: 635 nm, < 1 mW
Laser class: 2 Laser class: 2
Measuring accuracy for incline measurement: Measurement accuracy, typical: ± 1.5 mm
4 s
Power supply: 2 x 1.5 V LR03 (AAA)
Power supply: 2 x 1.5 V LR03 (AAA)
Memory capacity (values): 10
Memory capacity (values): 10
Dimensions: 119 x 53 x 29 mm
Dimensions: 119 x 53 x 29 mm
Dust and splash protection: IP 65
Dust and splash protection: IP 65
Tripod thread: 1/4"
Tripod thread: 1/4"

Scope of supply Scope of supply

GLM 50-22 GLM 50-25 G

Manufacturer’s certificate Manufacturer’s certificate
Protective Bag Protective Bag
Strap Strap
2 x battery (AA) 2 x battery (AA)

Part Number: 060107500 Part Number: 0601072V00

Bar Code: 4059952518800 Bar Code: 4059952548043

Measuring Tools Catalogue | 8

 Laser Measure Laser Measure
GLM 50 -27 C
​ GLM 50 -27 CG

The smart solution for measuring and The high-tech solution for easy
documenting with durable design measurement
• Robust Design to Withstand Rough Jobsites - • Greater Visibility for faster targeting with Green
Reinforced housing for brutal applications + IP Beam Laser
65 Protection • Robust Design to Withstand Rough Jobsites -
• Bluetooth® 4.2 low energy (Smart) - Measure Reinforced housing for brutal applications + IP
remotely, transfer measurements, create room 65 Protection
floor plans using Bosch MeasureOn App • Bluetooth® 4.2 low energy (Smart) - Measure
• Vibration Feedback - for successful and failed remotely, transfer measurements, create room
measurement. Great if display is out of sight, or floor plans using Bosch MeasureOn App
on loud construction sites • Vibration Feedback - for successful and failed
• Functions: Length, Area, Volume, Add/Subtract measurement. Great if display is out of sight, or
values, Continuous, Indirect, Stake-out, Wall on loud construction sites
Surface, Digital Spirit Level, Memory • Functions: Length, Area, Volume, Add/Subtract
values, Continuous, Indirect, Stake-out, Wall
Surface, Digital Spirit Level, Memory

Technical data Technical data

Measurement range: 0.05 – 50.00 m Measurement range: 0.05 – 50.00 m

Weight, approx: 0.17 kg Weight, approx: 0.17 kg
Measurement time, typical: < 0.5 s Measurement time, typical: < 0.5 s
Units of measurement: m/cm, ft/inch Units of measurement: m/cm, ft/inch
Laser diode: 635 nm, < 1 mW Laser diode: 635 nm, < 1 mW
Laser class: 2 Laser class: 2
Measurement accuracy, typical: ± 1.5 mm Measurement accuracy, typical: ± 1.5 mm
Measurement range of incline measurement: ± Measurement range of incline measurement:
0.2° 0 – 360° (4 x 90°)
Measuring accuracy for incline measurement: Measuring accuracy for incline measurement:
4 s ± 0.2°
Power supply: 2 x 1.5 V LR03 (AAA) Power supply: 2 x 1.5 V LR03 (AAA)
Memory capacity (values): 30 Memory capacity (values): 20 + 1
Connectivity: Bluetooth® 4.2 low energy (Smart) Connectivity: Bluetooth® 4.2 low energy (Smart)
Dimensions: 119 x 53 x 29 mm Dimensions: 119 x 53 x 29 mm
Dust and splash protection: IP 65 Dust and splash protection: IP 65
Tripod thread: 1/4" Tripod thread: 1/4"
Scope of supply Scope of supply

GLM 50-27 C GLM 50-27 C

Manufacturer’s certificate Manufacturer’s certificate
Protective Bag Protective Bag
Strap Strap
2 x battery (AA) 2 x battery (AA)
Part Number: 0601072T00 Part Number: 0601072U00
Bar Code: 4059952518824 Bar Code: 4059952518831

9 | Measuring Tools Catalogue

Laser Measure Laser Measure
GLM 50 C
​ GLM 100 – 25 C
​

The smart solution for measuring and The smart solution for measuring and
documenting documenting surroundings, even outdoors
• Distance measurement up to 50m with • Digital Viewfinder with Zoom Functionfor
Bluetooth connectivity precision over large distances, outdoors and in
• Easy handling with improved user interface and complex surroundings
illuminated, rotating colour display • High-contrast IPS colour display provides
• Functions: Length, Area, Volume, Add/Subtract optimal readability
values, Continuous, Indirect , Stake-out, Wall • Scratch resistance glass
Surface, Digital Spirit Level, Memory • Bluetooth transfer of measurements to
MeasuringOn App for easy documentation and
storage
• Functions: Length, Area, Volume, Add/
Subst., Continuous, Indirect, Stake-out, Wall
Surface, Spirit Level, Timer, Memory, Bluetooth
Connectivity, Camera and Zoom Function

Technical data Technical data

Measurement range: 0.05 – 50.00 m Measurement range: 0.08 – 100.00 m

Weight, approx: 0.1 kg Laser diode: 650 nm, < 1 mW
Measurement time, typical: < 0.5 s Weight, approx: 0.21 kg
Units of measurement: m/cm, ft/inch Measurement time, typical: < 0.5 s
Laser diode: 635 nm, < 1 mW Units of measurement: m/cm/mm/ft/inch/ft-inch
Laser class: 2 Laser class: 2
Measurement accuracy, typical: ± 1.5 mm Measurement accuracy, typical: ± 1.5 mm
Measuring accuracy (typical): ± 0.2° Measuring accuracy (typical): ± 0.2°
Measurement time, max: 4 s Measurement time, max: 4 s
Power supply: 2 x 1.5 V LR03 (AAA) Power supply: 3 x AA Batteries (1,5 V)
Memory capacity (values): 30 Automatic deactivation: 5 min
Battery lifetime, operating time, approx: 2.5 h Memory capacity (values): 50
Dust and splash protection: IP 54 Dust and splash protection: IP 54
Tripod thread: 1/4" Tripod thread: 1/4"

Scope of supply Scope of supply

GLM 50 C GLM 100 - 25 C

Manufacturer’s certificate Carrying Strap
Protective Bag 3 x AA Batteries (1,5 V)
2 x 1.5 V LR03 battery (AAA) Manufacturer’s certificate
Protective Bag

Part Number: 0601072C00 Part Number: 0601072Y00

Bar Code: 3165140822909 Bar Code: 4059952614298

Measuring Tools Catalogue | 10

Vernier Height Gauge
0-24"
Item number: 514-107

Description

This vernier height gauge o ers you the following bene ts:
You can take accurate and fast readings thanks to the satin chrome nished main and vernier
scales.
A carbide-tipped scriber is provided.

Speci cation

Fine adjustment: 6 mm/0.27"

Range: 0 - 24 Inch
Maximum Permissible Error J MPE: ±0,05 mm/0.002"
Mass: 7.4 kg
Graduation: 0,001"/0,02 mm
Scale adjustment: 0.6"
Delivered: Including scriber, scriber clamp and cover
Digital/Analog: Analog
Inch-Metric: Inch/Metric

Accessories

Optional accessories:

Center Master
for 9x9mm
951144
List Price
£138.00 inc. VAT
£115.00 ex. VAT

Depth Gauge Attachment

for 9x9 mm
900764
List Price
£37.80 inc. VAT
£31.50 ex. VAT

Contact Sensor
for Height Gauges
900872
List Price
£92.40 inc. VAT
£77.00 ex. VAT

Holding Bar for Swivel Clamp

9x9mm, 50mm Length
953638
 List Price
11.30 ex. VAT

Holding Bar for Swivel Clamp

9x9mm, 100mm Length
900209
List Price
9.90 ex. VAT

Swivel Clamp
for D= 4/8mm, Dovetail
900321
List Price
15.30 ex. VAT

Magni er for Vernier Height Gauge

300, 450, 600mm
07GZA003
List Price
£30.72 inc. VAT
£25.60 ex. VAT

Standard accessories:

Scriber Clamp
for 9x9mm Scriber
05GZA033
List Price
27.10 ex. VAT

Carbide Tipped Scriber

9x9mm, 80mm Length
07GZA000
List Price
£49.80 inc. VAT
£41.50 ex. VAT
● Registered design in Japan, China, and the European Union.
● Design registration pending in the United States of America.

PORTABLE SURFACE ROUGHNESS TESTER

SURFTEST SJ-210 SERIES

FORM MEASUREMENT
This is it! A small, lightweight, and extremely easy to use surface roughness
measurement instrument that lets you view surface roughness waveforms
right on the color LCD screen.

Bulletin No. 2194(2)

 The Surftest SJ-210 is a user-friendly surface roughness
measurement instrument designed as a handheld tool
that can be carried with you and used on-site.
Rt

Rz
Easy to use
Rz Rz

2.4-inch color graphic LCD with backlight

The color LCD provides excellent readability and an intuitive display that's easy to navigate.
The LCD also includes a backlight for improved visibility in dark environments.
Simple key layout
The Surftest SJ-210 can be operated easily using the keys on the front of the unit and
under the sliding cover.
Rt

Highly functional
Rz Rz Rz

Advanced data storage capabilities

Up to 10 measurement conditions and one measured profile can be stored in the
internal memory.
Optional memory card
An optional memory card can be used as an extended memory to store large quantities
of measured profiles and conditions.
Password protection
Access to each feature can be password-protected, which prevents unintended
operations and allows you to protect your settings.
Multilingual support
The display interface supports 16 languages, which can be freely switched.
Stylus alarm (patent pending in Japan)
An alarm warns you when the cumulative measurement distance exceeds a preset
limit.

Extensive analysis
Rt

平均線
and display features
Rz Rz Rz

Complies with many industry standards

The Surftest SJ-210 complies with the following standards: JIS (JIS-B0601-2001,
JIS-B0601-1994, JIS B0601-1982), VDA, ISO-1997, and ANSI.
Displays assessed profiles and graphical data
Rt

In addition to calculation results, the Surftest SJ-210 can display sectional

calculation results and assessed profiles, load curves, and amplitude distribution
curves.

Rz Rz Rz
評価長さ 確率密度

2
 Color graphic LCD Battery
Intuitive display that's clear, sharp, and legible. The battery charges in one
quarter the time of previous
Large, 2.4-inch LCD Mitutoyo products.
The large LCD provides excellent readability.

Backlight
The backlight improves visibility in dark
environments.

Operation keys
•The keys on the front of the unit and under the sliding
cover are clearly labeled and easy to use.
•The user-friendly screen layout and arrow keys
provide intuitive operability.
•Displayed settings can be changed easily by using
the left and right arrow keys.
(Patent pending in Japan.)
• Infrequently used keys are hidden under the sliding
cover to prevent unintended operations.

Drive unit High-speed USB communication

The drive unit can be separated from the Data can be transferred to and from
display unit by using a cable, allowing more a computer via the high-speed USB
flexible measurement. The driver can be interface.
separated and reattached in one simple Applicable standards
step.
In addition to
JIS and ISO, the
Surftest SJ-210
also complies with
ANSI and VDA
standards.

Memory card support

The memory card slot lets you store large
Multilingual support amounts of data onto a memory card.
c 平均線
There are many different kinds of drive units
and detectors available. The display
inter face
suppor ts 16
languages.
Zt4

Zt6
Zt5
Zt3
Zt2

評価長さ
0 20 40 60 80 10
Zt1

Rmr(c),%

基準長さ

3
 Many features in a compact body

Extensive display features that assist measurement

● The highly visible 2.4-inch color graphic LCD with backlight ● Assessed profiles, load curves, and
lets you see the screen easily even in dark environments. amplitude distribution curves can be
displayed in addition to calculation
results. Assessed profiles can also be
zoomed up and down.

● The display mode can be freely switched between

portrait and landscape.
● Calculation results are displayed in large
● Pass/fail results are displayed characters.
in color.

Advanced data storage capabilities Stylus alarm function

● Up to 10 measurement conditions can be stored in the ● An alarm warns you when the cumulative
internal memory. Conditions can be quickly read according measurement distance exceeds a preset
to the workpiece. limit. This feature can be used to prevent
● An optional memory card can be used as an extended problems that would be caused by worn
memory to store large quantities of measured profiles and out styli.Any value can be specified as
conditions. *See page 10 for details about the memory card. the limit. (Patent pending in Japan)
Storage Capacity
Internal Memory Card
Data type
memory (option)
Measured profiles 1 Easy setting
10000
Calculation result 10 ● Displayed settings can be easily changed
Measurement condition 10 500 by pressing the left and right arrow keys
under the sliding cover. For example,
● Many interface options: these keys can be used to switch the cut-
• A USB interface is equipped off value (λc) and the number of sampling
as standard. lengths (N) on the measurement screen.
• The Surftest SJ-210 also (Patent pending in Japan)
provides an RS-232C output,
Digimatic output, printer (Example of the
measurement screen)
output, and footswitch input.
Setting parameters and recalculating results
● The required parameters can be selected
Advanced features from the screen. The sub-menu also
● The multilingual display interface supports 16 languages, lets you specify detailed settings such
which can be freely switched. as the tolerance. After completing
measurement, the parameters can be
● Access to features can be password-protected.
changed and calculation can be executed
● A quick-charge, long-life battery is provided. again* using the new parameters.
*May not be possible, depending on
the measurement conditions.

4
Detector / Drive Units

Battery-powered portability scores when making surface roughness measurements on

the shop floor.
Capable of performing measurements in any orientation, including vertical and upside-down. Optional accessories, such as a height gage
adapter, allow measurements to be performed efficiently in various situations and setups.
*Refer to pages 8 to 11 for details of the optional accessories available.

A wide variation in system setup is possible with the detector + drive unit + display
unit combination.
Highly functional detectors and drive units
The driver can be separated from the
display unit and reattached in one
easy step.

[Detaching drive unit

[Storing drive unit in Display unit] from Display unit]

Detector supplied as standard Drive units

Standard drive unit Transverse tracing drive unit Retractable drive unit
• Popular standard drive unit • Best suited for measurement of • The detector is in the retracted
nar ro w, shro u d e d w o r k p i e ce position at rest so it is immune
features such as crankshaft, EDM from damage when inserted into
a feature whose profile cannot be
parts, etc.
Selectable from the following two items. easily seen, such as a blind hole, etc.
(Patent Registered in Japan)
● Measuring force: 0.75mN
Stylus profile: Tip radius 2µm
Tip angle 60°
● Measuring force: 4mN
Stylus profile: Tip radius 5µm
Tip angle 90°

Optional detectors Carrying case

A wide range of optional detectors is available, including A convenient carrying
detectors for small holes, extra small holes, gear tooth case is supplied as
surfaces, and deep grooves. standard for
*See page 8 for details about the Detectors. protecting the
instrument in the field.

5
 Specifications

Type of detector Standard drive unit type Retractable drive unit type Transverse tracing drive unit type
SJ -210 SJ -210 SJ -210 SJ -210
Model No.
(0.75mN type) (4mN type) (4mN type) (4mN type)
Order No. inch / mm 178-561-01A 178-561-02A 178-563-02A 178-565-02A
X axis .69" (17.5mm) .22" (5.6mm)
Measuring
Z axis Range 14200 µin (-7900µin~+6300µin) / 360µm (-200µm ~ +160µm)
range
(Detector) Range / Resolution 14170µin /.8µin (360µm / 0.02µm), 4000µin / .2µin (100µm / 0.006µm),1000µin /.08µin (25µm / 0.002µm)
Measuring speed Measuring: 0.01, 0.02, 0.03 in/s (0.25mm/s, 0.5mm/s, 0.75mm/s) Returning: 1mm/s
Measuring force / Stylus tip 0.75mN type: 0.75mN / 2µmR 60°, 4mN type: 4mN / 5µmR 90°
Skid force Less than 400mN
Applicable standards JIS ’82 / JIS ’94 / JIS ’01 / ISO ’97 / ANSI / VDA
Assessed profiles Primary profile / Roughness profile / DF profile / Roughness profile-Motif
Ra, Rc, Ry, Rz, Rq, Rt, Rmax, Rp, Rv, R3z, Rsk, Rku, RPc, Rsm, Rmax, Rz1max, S, HSC, RzJIS, Rppi, R∆a, R∆q,
Evaluation parameters
Rlr, Rmr, Rmr(c), R δ c, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Vo, Rpm, tp, Htp, R, Rx, AR, Possible Customize
Analysis graphs Bearing area curve / Amplitude distribution curve
Filters Gaussian, 2CR75, PC75
λc 0.003, 0.01, 0.03, 0.1" (0.08 , 0.25 , 0.8 , 2.5mm)
Cut off length
λs 100, 300µin (2.5 , 8µm) or none
Sampling length 0.003, 0.01, 0.03, .1 " (0.08 , 0.25 , 0.8 , 2.5mm)
×1,×2,×3,×4,×5,×6,×7,×8,×9,×10, ×1, ×2, ×3, ×4, ×5, ×6, ×7, ×8, ×9, ×10,
Number of Sampling lengths (×n) Arbitrary .0118 ~ .22"(.0001" Interval)
Arbitrary 0.01~.63" (.0001"interval) [(0.3~16.0 mm: 0.01mm interval)] [(0.3 ~ 5.6mm: 0.01mm Interval)]
LCD dimensions 1.45 x 1.93" (36.7×48.9 mm)
Japanese, English, German, French, Italian, Spanish, Portuguese, Korean,
Display languages
Traditional Chinese, Simplified Chinese, Czech, Polish, Hungarian, Turkish, Swedish, Dutch
Vertical display: 1 parameter / 3 parameter / trace to measurements
Calculation result display
Horizontal display: 1 parameter / 4 parameter / trace to measurements (Horizontal display is invertable)
Printing function *1 Measurement conditions / Calculation results / Calculation results for each sampling length /
(Dedicated printer is required separately.) Assessed profile / Bearing area curve / Amplitude distribution curve / Environment setting information
External I /O USB I / F, Digimatic Output, Printer Output, RS-232C I / F, Foot SW I/F
Customization Desired parameters can be selected for calculation and display
GO / NG judgment *2 By max value / 16％ / Standard deviation
Storage of measurement condition Save the conditions at power OFF
Functions Internal memory: Measurement condition (10 sets), Measured profile (1set)
Memory card (Option): 500 measurement conditions, 10000 measured profiles, 500 display images
Storage
Text file (Measurement conditions / Measured profile / Assessed profile /
Bearing area curve / Amplitude distribution curve)
Calibration Saves last inputted nominal value of specimen / Average calibration with multiple measurement (Max.5 times) is available
Power-saving function Auto-sleep off function (10-600sec) *3
Two-way power supply: battery (rechargeable Ni-MH battery) and AC adapter
Power supply *Charging time: about 4 hours (may vary due to ambient temperature)
*Endurance: about 1000 measurements (differs slightly due to use conditions / environment)
Display unit 2.05 x 2.6" x 6.3" (52.1×65.8×160mm)
Size (W×D×H)
Drive unit 4.5 x .9 x 1.02" (115×23×26mm)
Mass About 1.1lbs (500 g) (Display unit + Drive unit + Standard detector)
12BAA303 Connecting cable *4
12BAA303 Connecting cable *4
178-606 Roughness specimen (Ra 1.00µm)
178-602 Roughness specimen (Ra 3.00µm)
12AAE643 Point-contact adapter
12BAK699 Carrying case
12AAE644 V-type adapter
12BAK700 Calibration stage
12BAK699 Carrying case
Standard accessories 12BAK820 Protective sheets for display
12BAK700 Calibration stage
AC Adapter
12BAK820 Protective sheets
Operation manual
for display
Quick reference manual
AC Adapter, Operation manual
Warranty
Quick reference manual, Warranty
*1: Order the SJ-210 printer (No.178-421A, optional accessory) separately.
See page 10 for details about the SJ-210 printer.
*2: Standard deviation only can be selected in ANSI. 16% rule cannot be selected in VDA.
*3: Auto-sleep function is invalid when AC adaptor is used.
*4: For connecting the calculation display unit and drive unit.

6
Dimension Display Unit and Drive Unit

Display unit, Drive unit Unit: inch(mm)

● Drive unit stored inside display unit (Standard detector installed in drive unit)
8.43”(214.1)
6.85”(174.1) 1.57”(40)
0.56” 6.3”(160)
(14.1)

Sliding cover : Closed

PAGE

2.6”(65.8)
START
STOP
POWER
DATA

Sliding cover : Open

PAGE
START
STOP
POWER
DATA

Without back With back

face cover face cover
2.05”(52.1)

● Drive unit not stored inside display unit (Standard detector installed in drive unit)
Standard drive unit
PAGE
0.9”(23)

START
STOP
POWER
DATA

Connecting cable 39.4”(1m）

1.02”(26)

0.99”
(25.2) 4.53”(115) 6.3”(160)
1.05”
(26.7)
Retractable drive unit Transverse tracing drive unit
0.9”(23)

0.9”(23)
1.02”(26)

1.02”(26)
.039”(1)

0.08”(2) 0.118”(3) 1.77”(45)

0.91”(23.2) 4.53”(115) 0.26”(6.6) 1.8”(46.5) 4.53”(115)
1.05”(26.7)

7
 Dimensions Detectors and Drive units

Detectors Unit: inch(mm)

Standard detectors Gear-tooth surface detectors

Order No.
Measuring Stylus profiles* Remarks column Order No.
Measuring Stylus profiles*
force force
178-296 0.75mN 2 µmR/60˚ Dedicated to the 178-388 0.75mN 2 µmR/60˚
standard/retractable
178-390 4 mN 5 µmR/90˚ drive unit 178-398 4 mN 5 µmR/90˚
178-387 0.75mN 2 µmR/60˚ Dedicated to the *Tip radius / Tip angles
transverse tracing 60.1
178-386 4 mN 5 µmR/90˚ drive unit
Dedicated to the 12.6 Stylus
178-395 0.75mN 2 µmR/90˚

R40
standard/retractable 60°

0.9
178-391 4 mN 10 µmR/90˚ drive unit
.4
*Tip radius / Tip angles ф2

1.8

ф9
0.4
61 0.6
16.4 Stylus 1.4
6

3.5
ф9

4.8
2.4

1.5 59.5

Small hole detectors Deep groove detectors

Order No.
Measuring Stylus profiles* Remarks column Order No.
Measuring Stylus
Remarks column
force force profiles*
178-383 0.75mN 2 µmR/60˚ Minimum 178-385 0.75mN 2 µmR/60˚ Not available for
measurable hole the transverse
diameter:4ф .5mm
178-394 4 mN 5 µmR/90˚ tracing drive unit
178-392 4 mN 5 µmR/90˚
*Tip radius / Tip angles
*Tip radius / Tip angles 61
60.7 3.5 16.4 Stylus
ф 16.2 Stylus
3. 8
13.6

ф9
10
9

3.5 4.8
ф9

2 4.8
1.5
1.5

Extra small hole detectors Drive units

Measuring Stylus profiles* Remarks column Order No.
Order No.
force
178-230-2 Standard drive unit
178-384 0.75mN 2 µmR/60˚ Minimum
measurable hole
178-233-2 S-Drive unit
178-393 4 mN 5 µmR/90˚ diameter:2ф .8mm S-Drive unit set
178-234-2
(includes point-contat adapter)
*Tip radius / Tip angles
60.3 178-235 R-Drive unit
ф 12.8 Stylus
2.4

1.6
ф9
0.4
1.8

0.8

8
Optional Accessories For Drive Unit

Drive unit accessories

Nosepiece for flat surface Nosepiece for cylindrical surface

Nosepiece for flat surface No.12AAA218 Nosepiece for cylindrical surface
No.12AAA217 No.12AAA217 No.12AAA218
*Not available for the *Not available for the
transverse tracing transverse tracing
drive unit. drive unit.

V-type adapter Point-contact adapter

No.12AAE644 No.12AAE643
7.7mm
*Transverse tracing drive *Transverse tracing drive
unit type standard unit type standard
accessories. m accessories.
72m
*Dedicated to the transverse *Dedicated to the transverse
tracing drive unit. tracing drive unit.

Extension rod (50mm) (Note: Extension is possible with only a single rod.) Extension cable (1m) (Note: Extension is possible with only a single cable.)
No.12AAA210 Extension rod 50mm No.12BAA303
No.12AAA210
*Not available for the *For connecting between calculation
transverse tracing display unit and drive unit.
drive unit.

Support feet set Vertical positioning adapter

Support feet set
No.12AAA216 No.12AAA216
No.12AAA219 Vertical positioning adapter
No.12AAA219
*Not attachable to the *Not available for the
detector side of the transverse tracing
transverse tracing drive unit.
drive unit.
Detector side

Magnetic stand adapter Height gage adapter

Height gage adapter
No.12AAA221 (ø 8mm) Magnetic No.12AAA222 ( 9 9mm)
stand adapter
No.12AAA220 (ø 9.5mm) No.12AAA233 (1/4 in 1/2 in)

Setting attachments * Not available for the transverse tracing drive unit

Enhances measurement efficiency by facilitating the measurement setup of multiple workpieces of the same type and of the hard-to-access sections
of a workpiece.
Setting attachment: V type for measuring Setting attachment: Magnetic slider type Setting attachment: Inside diameter type
in the cylinder axis direction
No.178-034 No.178-035
No.178-033
Best suited for Greatly facilitates measurement
The V-width is adjustable measurement of the of internal wall surfaces, for
to the cylinder diameter flat surface of a example, a cylinder block.
facilitating axial workpiece that has
measurement of a wide • Applicable diameter:
partial indentions
range of cylinder diameters. and steps and that is ø 75 ~ ø 95mm
• Adjustable range: hard to set the drive unit. Combination use with • Accessible depth:
ø 5 ~ 150mm the magnet type specimen holder (Option No. 30 ~ 135 mm
12AAA910) further improves the ease of operation.

9
 Optional Accessories For External Equipment

Printer for SJ-210 Digimatic mini processor DP-1VR

Assessed profiles and calculation results and curves can be printed By connecting this printer to the Surftest SJ-210's digimatic
out by connecting the SJ-210-dedicated printer, which is palm output, you can print calculation results, perform a variety of
sized 3.7 x 4.9 x 2.7" (W×D×H: 93×125×70mm) and can run on an statistical analyses, draw a histogram or D chart, and also perform
internal battery. complicated operations for X-R control charts.
■Power supply can be selected. (AC adapter or battery pack)
■ Printable items: Measurement conditions, calculation results, assessed
profile, bearing area curve (BAC), amplitude distribution curve
(ADC), and environment settings.

264-504-5A

178-421A

SJ-210 → DP-1VR Connecting cable

1m: No. 936937 Digimatic SPC cable
2m: No. 965014 Digimatic SPC cable
Unit configuration:
① Printer main unit
② Printer connecting cable
③ Printing paper 6-pack
④ Battery pack 1 piece Memory card
⑤ Exclusive use AC adaptor
(with AC power cord) A memory card for saving 500 measurement conditions, 10,000
1 piece measured profiles, 500 display images, text file (measurement
Example of the connection with SJ-210 conditions, measured profiles, assessed profiles, BAC, ADC)

*Not all memor y cards can be

recognized. Please use the
memory card recommended by
Mitutoyo.

Example of the output

by the printer

No. 12AAL069

Printer for SJ-210 supplies:

Printing paper (5-pack) No. 12AAA876

10
Optional Accessories For External Output

Simplified communication program for SURFTEST SJ series

The Surftest SJ-210 has a USB interface, enabling data to be transferred to spreadsheet or other software.
We also provide a program that lets you create inspection record tables using a Microsoft Excel* macro.

Required environment*:
• OS: Windows XP-SP3 • Spreadsheet software: Microsoft Excel 2002
Windows Vista Microsoft Excel 2003
Windows 7 Microsoft Excel 2007
Windows 8 (32/64bit) Microsoft Excel 2010/13

*Windows OS and Microsoft Excel are products of

Microsoft Corporation.

The optional USB cable is also required.

• USB cable for SJ-210 series (2m)
No. 12AAL068

*Will not work with MS Excel 2016

This program can be downloaded for free from
the Mitutoyo website.
http://www.mitutoyo.com

Footswitch Input Tool: Calculation results input unit

A footswitch is used to trigger measurement. This tool is very useful Surftest SJ-210 calculation results can be loaded directly into
in cases where you need to measure the same workpiece multiple commercial spreadsheet software via this unit simply by connecting
times using jigs and other fixtures. it to the USB connector on a computer or a PS/2 type keyboard
connector. (See Catalog No. E4250-264 for details.)

No. 12AAJ088

USB keyboard signal conversion model

IT-012U No. 264-012-10
PS/2 keyboard signal conversion model
IT-005D No. 264-005

11
 © 2016 Mitutoyo America Corporation
Coordinate Measuring Machines Vision Measuring Systems Form Measurement Optical Measuring
Whatever your challenges are,
Mitutoyo supports you from start to finish.

Mitutoyo is not only a manufacturer of top-quality

measuring products but one that also offers qualified
support for the lifetime of the equipment, backed by
comprehensive services that ensure your staff can make
the very best use of the investment.
Test Equipment Small Tool Instruments
Sensor Systems Digital Scale and DRO Systems
and Seismometers and Data Management Apart from the basics of calibration and repair, Mitutoyo
offers product and metrology training, as well as IT
support for the sophisticated software used in modern
measuring technology. We can also design, build, test
and deliver measuring solutions and even, if deemed
cost-effective, take your critical measurement challenges
in-house on a sub-contract basis.

Find additional product literature

and our product catalog
www.mitutoyo.com Mitutoyo America Corporation
www.mitutoyo.com
One Number to Serve You Better
Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance
data contained in this printed matter as well as other technical data are to be regarded as approximate average values. We
1-888-MITUTOYO (1-888-648-8869)
therefore reserve the right to make changes to the corresponding designs. The stated standards, similar technical regulations,
descriptions and illustrations of the products were valid at the time of printing. In addition, the latest applicable version of our
General Trading Conditions will apply. Only quotations submitted by ourselves may be regarded as definitive. Specifications M3 Solution Centers:
are subject to change without notice.
Aurora, Illinois (Headquarters)
Mitutoyo products are subject to US Export Administration Regulations (EAR). Re-export or relocation of our products may
require prior approval by an appropriate governing authority. Boston, Massachusetts
Trademarks and Registrations Huntersville, North Carolina
Designations used by companies to distinguish their products are often claimed as trademarks. In all instances where Mitutoyo
America Corporation is aware of a claim, the product names appear in initial capital or all capital letters. The appropriate Mason, Ohio
companies should be contacted for more complete trademark and registration information.
Plymouth, Michigan
City of Industry, California
Birmingham, Alabama
Renton, Washington
Houston, Texas

3M 0716-04 • Printed in USA • July 2016

 M I C R O M E T E R S

Interchangeable Anvil Outside Micrometers 111 / 115 Series

S-wrench Torque Wrench

Digital models 111-06-1 Standard Guiding rings

FEATURES

• Resolution: • Interchangeable anvils provide • Inch / Metric conversion

Digital reading: .00005” / 0.001mm wider measuring ranges • Upon switching on the display will read
Scale on digital models: .0001” / 0.01mm • Carbide tipped measuring faces the actual absolute measuring position
Scale on mechanical models: .001” / 0.01mm • Grey painted steel frame for • Automatic On / Off to maximize battery life
Flatness: .00004" / 1μm models up to 12” / 300mm • Absolute or incremental measuring modes
• Ratchet stop • Grey welded pipe frame for • Protection level IP65
models over 12” / 300mm models

STANDARD ACCESSORIES

• S-wrench, Battery (Digital models), Standards,

Interchangeable anvils, Torque wrench, 2 Guiding rings
• Warranty card, Instruction manual, Calibration certificate

SPECIFICATIONS

Inch Metric Digital models Mechanical models

Range Accuracy Range Anvils Standards Inch Code No. Metric Code No. Accuracy Inch Code No. Metric Code No. Accuracy
0-6" ± .0002" 0-150mm 6 pcs 5 pcs 115-06-1 115-06-0 ± 0.003mm 111-06-1 111-06-0 0.006mm
6-12" ± .0003" 150-300mm 6 pcs 6 pcs 115-12-1 115-12-0 ± 0.005mm 111-12-1 111-12-0 0.008mm
0-4" ± .0002" 0-100mm 4 pcs 3 pcs 115-04-7 115-04-6 ± 0.003mm 111-04-7 111-04-6 0.005mm
4-8" ± .0003" 100-200mm 4 pcs 4 pcs 115-08-7 115-08-6 ± 0.004mm 111-08-7 111-08-6 0.007mm
8-12" ± .0003" 200-300mm 4 pcs 4 pcs 115-12-7 115-12-6 ± 0.005mm 111-12-7 111-12-6 0.009mm
12-16" ± .0004" 300-400mm 4 pcs 2 pcs 115-16-1 115-16-0 ± 0.006mm 111-16-1 111-16-0 0.011mm
16-20" ± .0005" 400-500mm 4 pcs 2 pcs 115-20-1 115-20-0 ± 0.007mm 111-20-1 111-20-0 0.013mm
20-24" ± .0006" 500-600mm 4 pcs 2 pcs 115-24-1 115-24-0 ± 0.007mm 111-24-1 111-24-0 0.015mm
24-28" ± .0006" 600-700mm 4 pcs 2 pcs 115-28-1 115-28-0 ± 0.008mm 111-28-1 111-28-0 0.016mm
28-32" ± .0007" 700-800mm 4 pcs 2 pcs 115-32-1 115-32-0 ± 0.009mm 111-32-1 111-32-0 0.018mm
32-36" ± .0008" 800-900mm 4 pcs 2 pcs 115-36-1 115-36-0 ± 0.010mm 111-36-1 111-36-0 0.020mm
36-40" ± .0008" 900-1000mm 4 pcs 2 pcs 115-40-1 115-40-0 ± 0.010mm 111-40-1 111-40-0 0.020mm

Dimension Range Scope of application A L

Inch Metric mm mm
0-6" 0-150mm 82 158
6-12" 150-300mm 165 308
0-4" 0-100mm 57 108
4-8" 100-200mm 114 208
8-12" 200-300mm 165 308
12-16" 300-400mm 224 409
16-20" 400-500mm 275 509
20-24" 500-600mm 321 609
24-28" 600-700mm 371 709
28-32" 700-800mm 426 809
Note: The individual anvils are matched as a set with the frame.
32-36" 800-900mm 476 909
The accuracy can not be guaranteed if used with a different frame
36-40" 900-1000mm 576 1009

12 A S I M E T O C A T A L O G 2 0 2 1
 GROUP
518 ENGINEER’S HAND TOOLS
Engineer’s Rule Engineer’s Rule
Round End - Pocket Type Round End - Pocket Type
Spring tempered stainless steel blades. 13mm blade width with Spring tempered stainless steel blades. 12mm blade width with
pocket clip/depth gauge slide. Reverse side is marked with 1/64” to pocket clip/depth gauge slide. Reverse side is marked with 1/64” to
mm conversion table. 12mm blade width. Can also be used as a mm conversion table.
depth gauge.
EEC Class 1

Anti Glare Scale Order Code Price/1 Scale Order Code Price/1
Type Length KEN-518 RM Type Length SEN-518 RM
Satin Chrome Stainless Steel
Metric 150mm/6” -3510K 16.30 Metric 150mm/6” -3500K 15.00
Rustless & Inch Rustless & Inch

Engineer’s
Steel Rules
Finest quality spring tempered stainless steel. Satin chrome. Anti-glare finish with permanent black figures and graduations. Extremely easy
to read. Accuracy: ± 0.2mm full scale. Constant at 20°C. Rustless.
Round End

Round End - Flexible Blade

Spring tempered flexible Anti Glare Flexible Blade - Metric - subdivided to 0.5mm and 1mm, figured every 10mm.
steel blades. 12mm blade Satin Chrome
width. With hanging hole. Rustless
Scale Order Code Price/1
Type Length KEN-518 RM
Metric 150mm/6” -3010K 28.60 Flexible Blade - Inch - subdivided to 1/16”, 1/32” and 1/64”, figured every inch.
& Inch 300mm/12” -3210K 46.00
Metric 150mm -3030K 19.50
only 300mm -3230K 48.00
HAND TOOLS

Round End - Rigid Blade Rigid Blade - Metric - subdivided to 0.5mm and 1mm, figured every 10mm.
Spring tempered rigid steel blades.
150mm/6” = 19mm blade width.
Other lengths = 25mm blade width.
With hanging hole.
Scale Order Code Price/1
Type Length KEN-518 RM
150mm/6” -3110K 27.00
Metric 300mm/12” -3310K 50.00 Rigid Blade - Inch - subdivided to 1/16”, 1/32” and 1/64”, figured every inch.
& Inch 600mm/24” -3710K 104.00
1000mm/39” -3910K 267.00
150mm -3130K 25.00
Metric 300mm -3330K 40.00
only 600mm -3730K 92.00
1000mm -3930K 179.00
Square End

Square End - Flexible Blade Flexible Blade - Metric - subdivided to 0.5mm and 1mm, figured every 10mm.
Spring tempered flexible Anti Glare
steel blades. Satin Chrome
12mm blade width. Rustless
Flexible Blade - Inch - subdivided to 1/16”, 1/32” and 1/64”, figured every inch, every 8/64”,
and every 4/32”.
Scale Length Order Code Price/1
Type KEN-518 RM
Metric 150mm/6” -3020K 25.00
& Inch

Square End - Rigid Blade Rigid Blade - Metric - subdivided to 0.5mm and 1mm, figured every 10mm.
Spring tempered rigid steel blades.
150mm/6” = 19mm blade width.
300mm/12” = 25mm blade width.

Rigid Blade - Inch - subdivided to 1/16”, 1/32” and 1/64”, figured every inch, every every 8/64”,
and every every 4/32”.

Scale Order Code Price/1

Type Length KEN-518 RM
Metric 150mm/6” -3120K 29.00
& Inch 300mm/12” -3320K 61.00

386 PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2018

 GROUP
ENGINEER’S HAND TOOLS 518
Brass Counter
Measure
A robust measuring tool manufactured from hard rolled brass with permanent black figures and graduations.
Flexible and rustless, it has a 19mm wide blade and countersunk fixing holes.

Length Order Code Price/1

KEN-518 RM
1m/36” -4540K 252.00

Tapered Gauges Folding Steel Rule

These are called taper gauges only because of their shape - they do This folding steel rule is manufactured from spring tempered stainless
not measure tapers. They are ideally suited for the rapid accurate steel with a polished finish and it is both flexible and rustlesss. A
checking of the inside diameters of tubing, slot widths, hole sizes, strong, solid performer for the engineer.
setting calipers etc. Manufactured from spring tempered steel. Subdivided to mm, figured cm one side.
0.1mm increments. Rustless. Constant at 20°C. Satin chrome anti Inch - subdivided to 1/16”, figured 1” other side.
glare finish. Permanent black figures and graduations.

Length Order Code Price/1

KEN-518 RM
600mm/24” -2950K 132.00

HAND TOOLS
Line of Chords Rule
This precision tool has a line of chords scale for use in measuring
Range Weight Order Code Price/1 angles and in determining the circumference of a circle from a
(mm) each KEN-518 RM diameter measurement. The rule is flexible and rustless with deep
1 - 15 18g -1320K 70.00 etched figures filled with black ink.
15 - 30 36g -1340K 75.00

Tweezers
For workshop and home use. Cross pattern types are self
closing and open only under applied pressure. High quality
finish supplied singly or as a six piece set.

Sharp Nose

Needle Nose
Length Order Code Price/1
KEN-518 RM
600mm/24” -2980K 150.00

Flat Blade Cross Pattern Carpenter’s

Rules
Extremely lightweight extrusion made from anodised aluminium,
Bent Nose hardened and lacquered. Graduated mm/1/8”. Supplied in clear
plastic wallets.

Flat Blade

Sharp Nose Cross Pattern

Type Length Weight Order Code Price/1

(mm) each KEN-518 RM
Sharp Nose 115 20g -5100K 14.00
Needle Nose 115 20g -5120K 23.00 Measured Weight Order Code Price/1
Flat Blade Cross 170 30g -5140K 26.00 Length each SEN-518 RM
Bent Nose 145 30g -5160K 23.00 150mm/6” 33g -3600K 19.00
Flat Blade 120 20g -5180K 18.00 300mm/12” 62g -3620K 25.00
Sharp Nose Cross 115 20g -5200K 17.00 600mm/24” 124g -3640K 38.00
Set of 6 (1 of each above) 134g -5250K 108.00 1000mm/39” 191g -3660K 56.00
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR 387
© 2018
 GROUP
PIPE THREADERS/VICES 588
Drop Head
Threader
Strong-arm ratchet threading set complete with 1/2”, 3/4” and 1” quick change dies. Manufactured to the highest quality with comfortable
2-part handle to give greater leverage. Complete with tough moulded carry case.

Weight Order Code Price/1

Capacity each KEN-588 RM
1/2” - 1” 4.5kg -8800K 1573.80

Accessories
Weight Order Code Price/1
Description each KEN-588 RM
Head 1/2”
BSPT 660g -8820K 301.20
3/4”
BSPT 584g -8830K 301.20

HAND TOOLS
1” BSPT 839g -8840K 327.20
Die 1/2” BSPT 69g -8920K 172.40
3/4” BSPT 72g -8930K 172.40
1” BSPT 132g -8940K 172.40
Ratchet 1.5kg -8980K 541.30

Pipe Vices
Used for repetitive tasks on pipework. The
frame of the pipe vice is made from cast iron
with jaws made from hardened tool grade alloy
steel with a corrosion resistant coating. The top
jaw of the pipe vice is held in position with a
hook which automatically engages when the vice
is closed. The stand is fitted with an integral
tool tray, wide angled legs give greater stability
and the folding design provides easy storage
and transportation.

Group
445
Pipe Vice Only
Product Capacity Weight Order Code Price/1
Number (mm) each KEN-588 RM
VP055 8-55 4.50kg -8020K 936.50
VP085 10-85 6.70kg -8040K 1064.20
VP100 15-100 10.3kg -8060K 1354.70

Pipe Vice & Stand

Product Capacity Weight Order Code Price/1
Number (mm) each KEN-588 RM
VPS055 8-55 24.6kg -8220K 2025.30
VPS085 10-85 31.6kg -8240K 2331.80

Stand Only
Product To Suit Weight Order Code Price/1
Number (mm) each KEN-588 RM
TTS055 55 20.1kg -8520K 1225.70
TTS085 85 24.9kg -8540K 1434.70
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR 569
© 2018
 GROUP
518 ENGINEER’S HAND TOOLS
Feeler Stock Strip Feeler Stock Coil
Inch sizes are 12” long, 1/2” wide. Millimetre Also useful for shimming in fixture
sizes are furnished in 300mm lengths, and die work. Supplied in a compact,
Depth & Angle Gauges 12.7mm wide. Rounded ends. Each piece sturdy plastic rewindable dispenser case.
Plain Type Depth Gauge marked with thickness and with convenient Rewind feature, minimises accidental
Designed for measuring flat based recesses. 3/16” (5mm) hole for hanging. damage. Made of the finest tempered
Consisting of a precision ground steel rule steel, marked every 6” or 150mm with a
and body which are positioned at 90° to each line, thickness in thousandths of an inch or
other. The body has precision ground locating in hundredths of a mm.
faces, with a knurled
adjusting/securing nut.

Rule Length: Thickness Weight Order Code Price/1

150mm (6”) (mm) per 10 KEN-519 RM
12.7mm x 300mm
0.03 15g -1030K 8.00
0.04 15g -1040K 12.00
0.05 15g -1050K 14.00
0.06 20g -1060K 15.00
0.08 25g -1080K 15.00
0.10 30g -1100K 15.00
0.15 45g -1150K 15.00
0.20 60g -1200K 15.00
0.25 75g -1250K 15.00 Thickness Weight Order Code Price/1
0.30 80g -1300K 15.00 (mm) each KEN-519 RM
0.40 120g -1400K 15.00 12.7mm x 7.6m
0.50 150g -1500K 15.00 0.03 60g -3030K 110.00
1/2” x 12” 0.04 70g -3040K 137.00
0.0010” 60g -0020K 7.00 0.05 75g -3050K 82.00
0.0015” 20g -0030K 7.00 0.10 110g -3100K 110.00
0.0020” 20g -0040K 7.00 0.20 230g -3200K 110.00
0.0025” 20g -0050K 7.00 0.50 390g -3500K 82.00
1/2” x 25ft
0.0030” 30g -0060K 11.60
0.0040” 40g -0080K 11.60 0.0010” 100g -2020K 110.00
HAND TOOLS

0.0050” 40g -0100K 11.60 0.0015” 60g -2030K 112.00

0.0060” 40g -0120K 11.80 0.0020” 70g -2040K 82.00
0.0070” 60g -0140K 11.80 0.0030” 90g -2060K 82.00
0.0080” 70g -0160K 11.80 0.0040” 110g -2080K 82.00
Protractor Type Depth & Angle Gauge 0.0050” 135g -2100K 82.00
Ground steel with graduations from 0° - 180° 0.0090” 70g -0180K 9.80
0.0100” 80g -0200K 9.80 0.0060” 150g -2120K 82.00
in both directions. When rule is positioned to 0.0120” 90g -0240K 9.80 0.0150” 360g -2300K 82.00
90° it then provides accurate measurements 0.0150” 110g -0300K 9.80 1/2” x 20ft
of depth. 0.0200” 150g -0400K 9.80 0.0200” 430g -2400K 82.00
0.0250” 200g -0500K 9.80 0.0250” 500g -2500K 82.00

Radius Gauges Screw Pitch Gauges

Manufactured from hardened and polished Manufactured from hardened and polished
steel. Enclosed in a steel case. steel, blades are precision milled.
Size range: Enclosed in a steel case.
34 Blade Metric: 1.0 to 3.0 x .25 and Range of sizes: Whitworth - 4 - 62 TPI;
3.5 to 7.0 x .5 Metric - 0.75 - 6mm; American - 4 - 42 TPI.
32 Blade Metric: 7.5 to 15.0 x .5
32 Blade Inch: 17/64” to 1/2” x 1/64”
30 Blade Metric: 15.5 to 20.0 x .5 and
21.0 to 25.0 x 1
Rule Length: 30 Blade Inch: 1/32” to 1/4” x 1/64”.
150mm (6”)

No. of Weight Order Code Price/1

Blades each KEN-518 RM
34 70g -0820K 90.00 Type No. of Order Code Price/1
Type Order Code Price/1 32 80g -0850K 103.00 Blades KEN-518 RM
KEN-518 RM 32 120g -0940K 148.00 55° Whit. 28 -1000K 29.00
Plain -3400K 133.00 30 95g -0890K 103.00 60° Metric 20 -1010K 29.00
Protractor -3450K 85.00 30 70g -0920K 130.00 60° USA 30 -1070K 34.00

388 PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR

© 2018
 GROUP
ROLLER CABINETS & TOOL CHESTS 594
Accessories
320mm Paper Roll Holder ABS Work Top Tray
Multifunctional Tray Size: (WxDxH) 7 Piece Hook
Size: (WxDxH) 20x30x270mm Size: (WxDxH) Rack
720x470x25mm
320x90x120mm Size:
(WxDxH)
325x5x29mm

7 Piece Screwdriver
Side Tray 4 Piece Can Holder Holder
Size: (WxDxH) Size: (WxDxH) Size:
300x120x60mm 325x90x70mm (WxDxH)
200x39x65mm

Waste Bin
Size: (WxDxH)
Tote Tray 300x135x250mm
Order Code Price/1 Size (WxDxH):
Description 440 x 175 x 85mm
KEN-594 RM
Paper Roll Holder -1560K 91.00
ABS Work Top Tray -1580K 215.00
4 Piece Can Holder -1590K 72.00
7 Piece Hook Rack -1610K 65.00
7 Piece Screwdriver -1630K 42.00
Tote Tray -1640K 67.00
Multifunctional Tray -1650K 56.00
Side Tray -1660K 107.00
Waste Bin -1670K 124.00

Portable Stainless Steel Roller Cabinet

Tool Chests Manufactured from heavy gauge grade 304 stainless steel
Manufactured from heavy gauge steel with all welded construction. with double wall construction side panels and welded joints

HAND TOOLS
Durable and corrosion-resistant two part epoxy powder paint finish. for added rigidity. Quick release smooth running ball bearing
With quick release lid clasps, padlock hasps and textured carry drawer slides. Fully locking. 125 x 50mm heavy-duty extra strong
handles. Full width piano hinges provide rigidity and strength, castors, fitted with two brakes. Castors are rated to 100kg
ensuring smooth operation and additional security. capacity standing load per castor. Drawer loads should be evenly
distributed.
2 Drawer
Two full-length drawers with rigid aluminium lipped handles.
Automatically locks the drawers when the lid is closed, to prevent
accidental opening.
Drawer size:
508 x 190 x 76mm.

3 Drawer
Three full-length drawers with rigid aluminium edged handles.
Fully lockable unit with a handle on the top and a carry handle on
each end. The lid automatically locks all of the closed drawers when
lowered to prevent opening.
7 Drawer Roller Cabinets
Overall dimensions Drawer sizes
(W x H x D): (W x D x H):
520 x 340 x 215mm. 5@ 597 x 428 x 90mm.
Drawer sizes: Spares Order Code 1@ 597 x 428 x 135mm.
2@ 460 x 180 x 55mm. Lock SPR-567-7210K 1@ 597 x 428 x 180mm.
1@ 460 x 180 x 75mm. Key Blank SPR-567-7320K Overall dimensions:
Draw Slide SPR-567-7040K 683 x 480 x 887mm.
Castors SPR-567-6920K
Top Mat SPR-567-7540K
Draw Liner SPR-567-6610K
For Prices see Page 605

Number of Width Depth Height Weight Order Code Price/1

Drawers (mm) (mm) (mm) each KEN-594 RM Order Code Price/1
2 534 218 288 10.4kg -0100K 380.00 KEN-594 RM
3 520 215 340 10.4kg -0120K 697.00 -6020K 6406.00

PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR 595

© 2018
 GROUP
TOOL CONTROL 595
Complete Tool Control Sets include
Kennedy Professional Roller Cabinet
Manufactured from heavy gauge steel with double wall construction side panels and welded joints for added rigidity. Coated in a hard wearing
epoxy powder. Fully opening drawers for extra accessibility. Quick release smooth running ball bearing drawer slides with double sliders on
base drawer. Supplied with top mat and drawer liners. Fully locking. 125 x 50mm heavy duty extra strong castors, fitted with two brakes.
Overall dimensions: 890 x 690 x 460mm. Castors are rated to 100kg capacity standing load per castor.
Drawer loads should be evenly distributed.
Drawers (W x D x H): 4@ 590 x 410 x 50mm. 2@ 590 x 410 x 100mm. 1@ 590 x 410 x 200mm. 7 Drawer Roller Cabinet

25 Piece Set Configuration 50 Piece Set Configuration

25 Piece Set with Professional Roller Cabinet 50 Piece Set with Professional Roller Cabinet
Professional Pliers Pro-Torq Screwdrivers Sockets: 6, 7, 8, 9, 10, 11, Accessories:
1x 160mm snipe nose, Crosspoint: No.2 x stubby, 12, 13, 14, 15, 16, 17, Ratchet handle, sliding
1x 160mm diagonal cutters, No.2 x 100mm. 18, 19, 20, 21 and 22mm. T-handle, spinner handle, swivel
1x 160mm combination. Pozidriv(r): No.1 x 75, No.2 x 100, Deep Sockets: 10, 11, 12, 13, handle. Universal joint. 125 and
Metric Professional No.3 x 150mm. 14, 15, 17, 19 and 22mm. 250mm extensions, 250mm
Combination Wrenches Flared: 6.3 x 150, Screwdriver Bits wobble extensions, 1/4” and 1/2”
6, 7, 8, 9, 10, 11, 12, 13, 8.0 x 200mm. Slotted: 5, 5.5 and 6.5mm. male adaptors, 1/4” hex bit
14, 15, 16, 17, 18 and 19mm. Parallel: 5.0 x 150mm. Crosspoint: No.1, 2, 3, and 4. coupler.
25 Hex Bits: 3, 4, 5, 6, 8 and 10mm.
50
PIECES PIECES

HAND TOOLS
+ +

Product Weight Order Code Price/1 Product Weight Order Code Price/1
Number each KEN-595 RM Number each KEN-595 RM
TCC025 55.3kg -5540K 3769.00 TCC050 59.2kg -5520K 3918.00

75 Piece Set With Professional Roller Cabinet

Professional Pliers Metric Professional
1x 160mm snipe nose,
1x 160mm diagonal cutters,
Combination Wrenches
6, 7, 8, 9, 10, 11, 12, 13, 14, 75
1x 160mm combination. 15, 16, 17, 18 and 19mm. PIECES
Pro-Torq Screwdrivers
Crosspoint: No.2 x stubby, No.2 x 100mm.
Pozidriv(r): No.1 x 75, No.2 x 100,
No.3 x 150mm.
Flared: 6.3 x 150, 8.0 x 200mm.
Parallel: 5.0 x 150mm.
Sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14,
15, 16, 17, 18, 19, 20, 21 and 22mm.
Deep Sockets: 10, 11, 12, 13, 14,
15, 17, 19 and 22mm.
Screwdriver Bits
Slotted: 5, 5.5 and 6.5mm. +
Crosspoint: No.1, 2, 3, and 4.
Hex Bits: 3, 4, 5, 6, 8 and 10mm.
Accessories:
Ratchet handle, sliding T-handle,
spinner handle, swivel handle.
Universal joint.
125 and 250mm extensions,
250mm wobble extensions,
1/4” and 1/2” male adaptors,
1/4” hex bit coupler.

Product Weight Order Code Price/1

Number each KEN-595 RM
TCC075 61.5kg -5500K 4969.00
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR 607
© 2018
 GROUP
595 TOOL KITS
208 Piece Apprentice Engineer’s
Tool Kit - AET200 208
PIECES
Supplied in a three drawer professional roller cabinet and a
three drawer top chest. Manufactured from heavy
gauge steel with double wall construction side panels
and welded joints for added rigidity. Coated in a hard
wearing epoxy powder. Fully opening drawers for extra
accessibility. Quick release smooth running ball bearing
drawer slides with double sliders on base drawer.
Supplied with top mat and drawer liners. Fully locking.
125 x 50mm heavy duty extra strong castors, fitted with
two brakes. Overall dimensions: 890 x 690 x 460mm.
Castors are rated to 100kg capacity standing load per
castor. Drawer loads should be evenly distributed.
3 Drawer Top Chest
Top compartment size: 89 x 661 x 150mm.
Drawer sizes: 1@ 51 x 591 x 282.5mm.
2@ 102 x 591 x 282.5mm.
3 Drawer Roller Cabinet
Internal drawer dimensions
Bottom compartment size: 610 x 432 x 356mm.
Drawer sizes: 3@ 591 x 410 x 102mm.
Contents:
• 25 piece HSS drill set 1 - 13.00mm x 0.5mm.
• Six piece 200mm double cut engineer’s file set.
• Six piece 16cm cut 2 assorted needle file set.
• 25 x 230 x 280mm assorted abrasive sheet.
• 200mm chrome vanadium steel adjustable spanner.
• 6 x 150mm flat cold chisel.
• 19mm x 33m black pvc insulation tape.
• 76mm, 18 blade combination feeler gauge set.
• 4.8mm square head centre punch.
• 150mm/6” stainless steel rule c/w pocket clip.
• 178mm double ended Engineers’ scriber.
• Eye loupe.
• Adjustable telescopic 30mm dia.
inspection mirror (expands to 180mm).
• Six piece parallel pin punch set:
HAND TOOLS

2.4, 3.2, 4.0, 4.8, 5.5 and 6.4mm.

• 150mm/6” engineer’s square - BS 939 grade B.
• Tap wrenches 1.5 - 6.4mm and 6.4 - 19mm.
• Magnetic telescopic pick-up tool
extends to 550mm.
• 29 piece engineer’s bit set.
All 6mm hex x 25mm overall length, complete
with magnetic spinner handle, 6mm hexagon bit
adaptor and 6mm square socket adaptor.
Hexagon: 2, 3, 4, 5, 6, 7 and 8mm; flat 3, 4, 5,
5.5, 6.5 and 8mm; 3/32”, 1/8”, 5/32”, 3/16”, 1/4”, 7/32”
and 5/16”; crosspoint No.1, 2 and 3;
Pozidriv® No.1, 2 and 3.
• 450g (1lb) ball pein hammer wood shaft.
• 7.5m/25ft steel tape.
• Snap-off eight segment blade economy knife.
• Retractable trimming knife with five blades.
• Junior hacksaw frame.
• 300mm lightweight professional hacksaw frame.
• Six off 12” x 1/2” x 18tpi HSS hacksaw blades.
• 20 junior hacksaw blades.
• Two plastic handle household scissors.
• 150mm snipe nose plier with side cutter.
• 150mm diagonal cutting nipper.
• 150mm Engineers’ combination pliers
with side cutter.
• 250mm curved jaw high strength grip wrench.
• Eight piece Pro-Torq screwdriver set:
crosspoint No.1 x 75, No.2 x 100; pozidriv®
No.2 x 100; flared 6.3 stubby, 6.3 x 100,
8.0 x 200; parallel 5.0 x 75, 5.0 x 150.
• 14 piece combination spanner set: 6, 7, 8, 9, 10,
11, 12, 13, 14, 15, 16, 17, 18 and 19mm.
• 25 piece metric socket set 1/2” square drive
sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17,
18, 19, 22, 24, 27, 30 and 32mm.
Spark plug sockets: M10 and M14.
Accessories: quick release ratchet handle,
sliding T-handle, universal joint, 75, 125 and
250mm extension bars.
• Nine piece metric hex key set 1.5 - 10mm.

Set contents may

vary slightly
Order Code Price/1 according to product
KEN-595 RM development
-0550K 6003.00 and availability.

608 PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR

© 2018
 GROUP
595 TOOL KITS
208 Piece Apprentice Engineer’s
Tool Kit - AET200 208
PIECES
Supplied in a three drawer professional roller cabinet and a
three drawer top chest. Manufactured from heavy
gauge steel with double wall construction side panels
and welded joints for added rigidity. Coated in a hard
wearing epoxy powder. Fully opening drawers for extra
accessibility. Quick release smooth running ball bearing
drawer slides with double sliders on base drawer.
Supplied with top mat and drawer liners. Fully locking.
125 x 50mm heavy duty extra strong castors, fitted with
two brakes. Overall dimensions: 890 x 690 x 460mm.
Castors are rated to 100kg capacity standing load per
castor. Drawer loads should be evenly distributed.
3 Drawer Top Chest
Top compartment size: 89 x 661 x 150mm.
Drawer sizes: 1@ 51 x 591 x 282.5mm.
2@ 102 x 591 x 282.5mm.
3 Drawer Roller Cabinet
Internal drawer dimensions
Bottom compartment size: 610 x 432 x 356mm.
Drawer sizes: 3@ 591 x 410 x 102mm.
Contents:
• 25 piece HSS drill set 1 - 13.00mm x 0.5mm.
• Six piece 200mm double cut engineer’s file set.
• Six piece 16cm cut 2 assorted needle file set.
• 25 x 230 x 280mm assorted abrasive sheet.
• 200mm chrome vanadium steel adjustable spanner.
• 6 x 150mm flat cold chisel.
• 19mm x 33m black pvc insulation tape.
• 76mm, 18 blade combination feeler gauge set.
• 4.8mm square head centre punch.
• 150mm/6” stainless steel rule c/w pocket clip.
• 178mm double ended Engineers’ scriber.
• Eye loupe.
• Adjustable telescopic 30mm dia.
inspection mirror (expands to 180mm).
• Six piece parallel pin punch set:
HAND TOOLS

2.4, 3.2, 4.0, 4.8, 5.5 and 6.4mm.

• 150mm/6” engineer’s square - BS 939 grade B.
• Tap wrenches 1.5 - 6.4mm and 6.4 - 19mm.
• Magnetic telescopic pick-up tool
extends to 550mm.
• 29 piece engineer’s bit set.
All 6mm hex x 25mm overall length, complete
with magnetic spinner handle, 6mm hexagon bit
adaptor and 6mm square socket adaptor.
Hexagon: 2, 3, 4, 5, 6, 7 and 8mm; flat 3, 4, 5,
5.5, 6.5 and 8mm; 3/32”, 1/8”, 5/32”, 3/16”, 1/4”, 7/32”
and 5/16”; crosspoint No.1, 2 and 3;
Pozidriv® No.1, 2 and 3.
• 450g (1lb) ball pein hammer wood shaft.
• 7.5m/25ft steel tape.
• Snap-off eight segment blade economy knife.
• Retractable trimming knife with five blades.
• Junior hacksaw frame.
• 300mm lightweight professional hacksaw frame.
• Six off 12” x 1/2” x 18tpi HSS hacksaw blades.
• 20 junior hacksaw blades.
• Two plastic handle household scissors.
• 150mm snipe nose plier with side cutter.
• 150mm diagonal cutting nipper.
• 150mm Engineers’ combination pliers
with side cutter.
• 250mm curved jaw high strength grip wrench.
• Eight piece Pro-Torq screwdriver set:
crosspoint No.1 x 75, No.2 x 100; pozidriv®
No.2 x 100; flared 6.3 stubby, 6.3 x 100,
8.0 x 200; parallel 5.0 x 75, 5.0 x 150.
• 14 piece combination spanner set: 6, 7, 8, 9, 10,
11, 12, 13, 14, 15, 16, 17, 18 and 19mm.
• 25 piece metric socket set 1/2” square drive
sockets: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17,
18, 19, 22, 24, 27, 30 and 32mm.
Spark plug sockets: M10 and M14.
Accessories: quick release ratchet handle,
sliding T-handle, universal joint, 75, 125 and
250mm extension bars.
• Nine piece metric hex key set 1.5 - 10mm.

Set contents may

vary slightly
Order Code Price/1 according to product
KEN-595 RM development
-0550K 6003.00 and availability.

608 PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR

© 2018
 GROUP
TOOL KITS 595
300 Piece Engineer’s
Professional Tool Kit
Supplied in a five drawer professional roller cabinet and
a three drawer top chest. Manufactured from heavy
gauge steel with double wall construction side
panels and welded joints for added rigidity.
300
PIECES
Coated in a hard wearing epoxy powder.
Fully opening drawers for extra accessibility.
Quick release smooth running ball bearing
drawer slides with double sliders on base
drawer. Supplied with top mat and drawer liners.
Fully locking. 125 x 50mm heavy duty extra
strong castors, fitted with two brakes.
Overall dimensions: 890 x 690 x 460mm.
Castors are rated to 100kg capacity standing
load per castor. Drawer loads should be evenly
distributed.
3 Drawer Top Chest
Top compartment size: 89 x 661 x 150mm.
Drawer sizes: 1@ 51 x 591 x 282.5mm,
2@ 102 x 591 x 282.5mm.
5 Drawer Roller Cabinet
Internal drawer dimensions:
4@ 591 x 460 x 102mm.
1@ 591 x 410 x 204mm.
Contents:
• Set of 25 HSS drills 1 - 13.00mm x 0.5mm.
• Eight piece 200mm (8”) double cut
Engineers' file set.
• Six piece 16cm cut 2 assorted needle file set
• 20x 150mm (6”) junior hacksaw blades.
• 10x 12” x 1/2” x 18TPI HSS all hard
hacksaw blade.
• 25x 230mm x 280mm assorted abrasive
sheets.
• 200mm (8”) soft grip phosphate
adjustable wrench.

HAND TOOLS
• 6mm 150mm flat cold chisel.
• 3” 18-bade metric/inch comb feeler gauge set.
• 4” x 3/16” (4.8mm) square head centre punch.
• Set of 6 parallel pin punches.
• 150mm/6” inch/metric rigid rustless rule.
• 300mm/12” rigid rustless rule - round end.
• 150mm (6”) Engineer’s square.
• 300mm (12”) Engineer’s square.
• 7” double ended engineers scriber.
• 11/4” focal length eye loupe.
• Adjustable telescopic 11/4” mirror.
• Set of two: 1/16” - 1/4” and
1/4” - 3/4” tap wrenches.
• 1lb ball pein hammer - wood shaft.
• 16oz black rubber mallet - wood shaft.
• 51/2” plastic handle household scissors.
• 81/2” plastic handle household scissors.
• 5m/16” professional ABS steel tape.
• Snap-off 8 seg-blade heavy duty knife.
• Snap-off 13 seg-blade mini knife.
• Retractable trimming knife c/w five blades.
• Beaver style junior hacksaw.
• Professional ‘plus’ cushion grip hacksaw.
• Magnetic pick-up tool.
• Set of four Pro-Torq pliers.
• 10” curved jaw grip wrench
• 12 piece Pro-Torq screwdriver set.
• 64 piece 1/4” hexagon bit set.
• 1/4” hex bit driver.
• Seven piece box spanner set 6 - 19mm
c/w tommy bars.
• Combination wrenches: 10 - 19mm.
• 50 piece metric 3/8” square drive socket set.
• 8” straight blade tinsnip.
• Three drawer professional tool chest.
• Metal tote tray
• Five drawer professional roller cabinet.
• Eight piece metric Pro-Torq
hex wrench set on clip.
• Nine piece inch Pro-Torq hex wrench set on clip.
• 19mm x 33m black PVC insulation tape.
Set contents may
vary slightly
Order Code Price/1 according to product
KEN-595 RM development
-3080K 7815.00 and availability.
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR 609
© 2018
 GROUP
TOOL KITS 595
300 Piece Engineer’s
Professional Tool Kit
Supplied in a five drawer professional roller cabinet and
a three drawer top chest. Manufactured from heavy
gauge steel with double wall construction side
panels and welded joints for added rigidity.
300
PIECES
Coated in a hard wearing epoxy powder.
Fully opening drawers for extra accessibility.
Quick release smooth running ball bearing
drawer slides with double sliders on base
drawer. Supplied with top mat and drawer liners.
Fully locking. 125 x 50mm heavy duty extra
strong castors, fitted with two brakes.
Overall dimensions: 890 x 690 x 460mm.
Castors are rated to 100kg capacity standing
load per castor. Drawer loads should be evenly
distributed.
3 Drawer Top Chest
Top compartment size: 89 x 661 x 150mm.
Drawer sizes: 1@ 51 x 591 x 282.5mm,
2@ 102 x 591 x 282.5mm.
5 Drawer Roller Cabinet
Internal drawer dimensions:
4@ 591 x 460 x 102mm.
1@ 591 x 410 x 204mm.
Contents:
• Set of 25 HSS drills 1 - 13.00mm x 0.5mm.
• Eight piece 200mm (8”) double cut
Engineers' file set.
• Six piece 16cm cut 2 assorted needle file set
• 20x 150mm (6”) junior hacksaw blades.
• 10x 12” x 1/2” x 18TPI HSS all hard
hacksaw blade.
• 25x 230mm x 280mm assorted abrasive
sheets.
• 200mm (8”) soft grip phosphate
adjustable wrench.

HAND TOOLS
• 6mm 150mm flat cold chisel.
• 3” 18-bade metric/inch comb feeler gauge set.
• 4” x 3/16” (4.8mm) square head centre punch.
• Set of 6 parallel pin punches.
• 150mm/6” inch/metric rigid rustless rule.
• 300mm/12” rigid rustless rule - round end.
• 150mm (6”) Engineer’s square.
• 300mm (12”) Engineer’s square.
• 7” double ended engineers scriber.
• 11/4” focal length eye loupe.
• Adjustable telescopic 11/4” mirror.
• Set of two: 1/16” - 1/4” and
1/4” - 3/4” tap wrenches.
• 1lb ball pein hammer - wood shaft.
• 16oz black rubber mallet - wood shaft.
• 51/2” plastic handle household scissors.
• 81/2” plastic handle household scissors.
• 5m/16” professional ABS steel tape.
• Snap-off 8 seg-blade heavy duty knife.
• Snap-off 13 seg-blade mini knife.
• Retractable trimming knife c/w five blades.
• Beaver style junior hacksaw.
• Professional ‘plus’ cushion grip hacksaw.
• Magnetic pick-up tool.
• Set of four Pro-Torq pliers.
• 10” curved jaw grip wrench
• 12 piece Pro-Torq screwdriver set.
• 64 piece 1/4” hexagon bit set.
• 1/4” hex bit driver.
• Seven piece box spanner set 6 - 19mm
c/w tommy bars.
• Combination wrenches: 10 - 19mm.
• 50 piece metric 3/8” square drive socket set.
• 8” straight blade tinsnip.
• Three drawer professional tool chest.
• Metal tote tray
• Five drawer professional roller cabinet.
• Eight piece metric Pro-Torq
hex wrench set on clip.
• Nine piece inch Pro-Torq hex wrench set on clip.
• 19mm x 33m black PVC insulation tape.
Set contents may
vary slightly
Order Code Price/1 according to product
KEN-595 RM development
-3080K 7815.00 and availability.
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR 609
© 2018
 GROUP
595 TOOL KITS
100 Piece Mechanic’s 52 Piece Mechanic's Tool Kit
Starter Tool Kit Specifically designed for mechanics on the move.
Contents: Contents include: 582 x 298 x 255mm metal toolbox with tote tray,
• 8” and 12” satin chrome adjustable wrench set. adjustable wrenches, pocket knife, pliers, screwdrivers,
• 5m/16ft locking tape rule. spanners and
• Lightweight hacksaw frame. sockets.
• 400cc lever type steel grease gun.
• 150mm long nose pliers.
• 200mm long nose pliers.
• 150mm diagonal nippers.
100
• 150mm linesman's combination pliers. PIECES
• 200mm linesman's combination pliers.
• 250mm waterproof pliers.
• 12 piece mechanic’s pattern screwdriver set.
• Seven piece 6 - 19mm
chrome vanadium
open ended
spanner set.
• 14 piece
6 - 19mm
chrome vanadium 52
combination PIECES
spanner set.
• 55 piece 3/8”
drive socket
and bit set.
• Six drawer red
tool chest.

Set contents may

vary slightly
according to product
development
and availability.
HAND TOOLS

Weight Order Code Price/1 Order Code Price/1

each YMT-595 RM YMT-595 RM
34.0kg -3500K 3173.00 -2600K 1162.00

90 Piece Engineer’s
Workshop Tool Kit
Contents:
• Top chest.
• 24 piece 1/2” drive metric socket set.
• Six piece 16cm cut 2 assorted needle file set.
• 10x 12” x 1/2”x 18tpi all hard hacksaw blades.
• 8”/200mm chrome vanadium adjustable spanner.
• 12” rule - walleted.
• Metric/inch feeler gauge 60mm blade length.
• 11/2lb ball pein hammer- hickory shaft.
• 16oz black rubber mallet - wood shaft.
• 5m/16ft locking tape rule - chromed case.
• Eight segment 18mm heavy duty snap-off blade knife.
• Retractable trimming knife.
• DIY hacksaw.
• 2x 50mm G-clamps.
• 2x 100mm G-clamps. 90
• 6” snipe nose plier/side cutter. PIECES
• 8” straight blade tinsnip.
• 6” diagonal cutting nipper.
• 7” linesman’s pliers.
• 10” multiple slip joint pliers.
• 10” straight jaw high strength grip wrench.
• 16 function 10-blade tool.
• 15 piece duel grip screwdriver set.
• 14 piece 6 - 19mm drop forged.
combination spanner set.

Set contents may

vary slightly
according to product
development
and availability.

Order Code Price/1

SEN-595 RM
-1000K 1760.00

610 PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR

© 2018
 GROUP
595 TOOL KITS
100 Piece Mechanic’s 52 Piece Mechanic's Tool Kit
Starter Tool Kit Specifically designed for mechanics on the move.
Contents: Contents include: 582 x 298 x 255mm metal toolbox with tote tray,
• 8” and 12” satin chrome adjustable wrench set. adjustable wrenches, pocket knife, pliers, screwdrivers,
• 5m/16ft locking tape rule. spanners and
• Lightweight hacksaw frame. sockets.
• 400cc lever type steel grease gun.
• 150mm long nose pliers.
• 200mm long nose pliers.
• 150mm diagonal nippers.
100
• 150mm linesman's combination pliers. PIECES
• 200mm linesman's combination pliers.
• 250mm waterproof pliers.
• 12 piece mechanic’s pattern screwdriver set.
• Seven piece 6 - 19mm
chrome vanadium
open ended
spanner set.
• 14 piece
6 - 19mm
chrome vanadium 52
combination PIECES
spanner set.
• 55 piece 3/8”
drive socket
and bit set.
• Six drawer red
tool chest.

Set contents may

vary slightly
according to product
development
and availability.
HAND TOOLS

Weight Order Code Price/1 Order Code Price/1

each YMT-595 RM YMT-595 RM
34.0kg -3500K 3173.00 -2600K 1162.00

90 Piece Engineer’s
Workshop Tool Kit
Contents:
• Top chest.
• 24 piece 1/2” drive metric socket set.
• Six piece 16cm cut 2 assorted needle file set.
• 10x 12” x 1/2”x 18tpi all hard hacksaw blades.
• 8”/200mm chrome vanadium adjustable spanner.
• 12” rule - walleted.
• Metric/inch feeler gauge 60mm blade length.
• 11/2lb ball pein hammer- hickory shaft.
• 16oz black rubber mallet - wood shaft.
• 5m/16ft locking tape rule - chromed case.
• Eight segment 18mm heavy duty snap-off blade knife.
• Retractable trimming knife.
• DIY hacksaw.
• 2x 50mm G-clamps.
• 2x 100mm G-clamps. 90
• 6” snipe nose plier/side cutter. PIECES
• 8” straight blade tinsnip.
• 6” diagonal cutting nipper.
• 7” linesman’s pliers.
• 10” multiple slip joint pliers.
• 10” straight jaw high strength grip wrench.
• 16 function 10-blade tool.
• 15 piece duel grip screwdriver set.
• 14 piece 6 - 19mm drop forged.
combination spanner set.

Set contents may

vary slightly
according to product
development
and availability.

Order Code Price/1

SEN-595 RM
-1000K 1760.00

610 PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR

© 2018
 GROUP
TOOL KITS 595
62 Piece Workshop
Tool Kit
Five compartment cantilever tool box with specially moulded trays
to facilitate enhanced Tool Control and padlock hole for
additional security.
Contents:
• Sockets: 8 - 32mm, M10 and M14 spark plug
• 250mm sliding ‘T’-handle
• 125mm and 250mm extensions, 75mm wobble
extension
• Quick release 72T rubber hatchet handle
• 375mm/15” jointed knurl gripped swivel handle
• Universal joint
• Combination spanners: 6 -22mm.
• Pro-Torq screwdrivers: 5.5 x 100mm,
6.5 x 150mm and 8 x 200mm flat,
No.0, No.2 and No.3 cross point
• Pro-Torq pliers:
180mm/7” combination,
150mm/6” snipe nose and
165mm/6” diagonal
• Metric L-wrench ball driver set – 1.5 - 10mm
62
Order Code Price/1
PIECES
KEN-595 RM
-0050K 1774.00 Specially Moulded Trays

107 Piece Apprentice 162 Piece Power

Engineer’s Tool Kit Bit Set
Contents: Containing the most commonly used screwdriver bits, nut spinners,
• Toolbox Torx bits, drills and adaptors. Supplied in a moulded carry case.
• 6 piece Pro-Torq screwdriver set: crosspoint No.1 x 75 and No.2 x Dimensions (W x D x H): 455 x 178 x 297mm.
100mm; flared 6.3 x 100 and 8.0 x 250mm; Contents includes:
parallel 5 x 100 and 5 x 200mm 32x 25mm (1”) driver bits consisting of: slotted, crosspoint, square,
• 6 piece screwdriver set: crosspoint PH0 and PH1; pozi and torx.
parallel 1.4, 2.0, 2.4, and 3.0mm

HAND TOOLS
24x 50mm (2”) screwdriver bits consisting of: slotted, crosspoint and
• 6 - 19mm 14 piece metric combination spanner set. torx.
• 9 piece metric hex key set: 1.5 - 10mm 5x300mm (12") extra length masonry drills
• 8 piece 2nd cut file set: one each flat, hand, round, half round, 3 plus 11x standard length masonry drills.
square and square 18x nut driver bits.
• 12 piece 2nd cut needle file set: 1x screw finder.
1 each hand, flat, knife, round, 9x flat wood bits.
half round, square, 3 square, 17x woodworking drills.
crossing, round edge joint, 5x holesaw with mandrel.
slitting, warding and barrette 1x ruler. 1x centre punch.
• 2 of each grade 0, 1 and 2 1x ratcheting bit driver.
emery sheets 4x drill bit depth stop.
• 200mm/8” adjustable wrench 1x countersink.
• 18 blade metric/inch feeler 1x carpenter’s pencil.
gauge
• Magnetic pick-up tool extends
to 650mm
• 7.5m/25ft locking tape rule
• Snap-off blade knife
• Junior hacksaw
• 20 junior hacksaw blades
• 300mm (12”) hacksaw frame
• 6 hacksaw blades
• Shears
• 3 piece professional plier set
• 255mm straight jaw
grip wrench
• 6 x 150mm flat cold chisel
• 1lb ball pein hammer
• 175mm engineer’s scriber
• 30mm diameter inspection mirror
(extends to 650mm)
• Centre punch
• 150mm (6”) engineer’s
square
• 150mm (6”) pocket rule
• 100cc grease gun
• Eye loupe 162
107 PIECES
PIECES

Set contents may vary slightly according

to product development and availability.
Model Weight Order Code Price/1 Weight Order Code Price/1
Number each KEN-595 RM each SEN-595 RM
AET100 4.2kg -0500K 1628.00 3.4kg -3180K 371.00
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR 611
© 2018
 GROUP
TOOL KITS 595
62 Piece Workshop
Tool Kit
Five compartment cantilever tool box with specially moulded trays
to facilitate enhanced Tool Control and padlock hole for
additional security.
Contents:
• Sockets: 8 - 32mm, M10 and M14 spark plug
• 250mm sliding ‘T’-handle
• 125mm and 250mm extensions, 75mm wobble
extension
• Quick release 72T rubber hatchet handle
• 375mm/15” jointed knurl gripped swivel handle
• Universal joint
• Combination spanners: 6 -22mm.
• Pro-Torq screwdrivers: 5.5 x 100mm,
6.5 x 150mm and 8 x 200mm flat,
No.0, No.2 and No.3 cross point
• Pro-Torq pliers:
180mm/7” combination,
150mm/6” snipe nose and
165mm/6” diagonal
• Metric L-wrench ball driver set – 1.5 - 10mm
62
Order Code Price/1
PIECES
KEN-595 RM
-0050K 1774.00 Specially Moulded Trays

107 Piece Apprentice 162 Piece Power

Engineer’s Tool Kit Bit Set
Contents: Containing the most commonly used screwdriver bits, nut spinners,
• Toolbox Torx bits, drills and adaptors. Supplied in a moulded carry case.
• 6 piece Pro-Torq screwdriver set: crosspoint No.1 x 75 and No.2 x Dimensions (W x D x H): 455 x 178 x 297mm.
100mm; flared 6.3 x 100 and 8.0 x 250mm; Contents includes:
parallel 5 x 100 and 5 x 200mm 32x 25mm (1”) driver bits consisting of: slotted, crosspoint, square,
• 6 piece screwdriver set: crosspoint PH0 and PH1; pozi and torx.
parallel 1.4, 2.0, 2.4, and 3.0mm

HAND TOOLS
24x 50mm (2”) screwdriver bits consisting of: slotted, crosspoint and
• 6 - 19mm 14 piece metric combination spanner set. torx.
• 9 piece metric hex key set: 1.5 - 10mm 5x300mm (12") extra length masonry drills
• 8 piece 2nd cut file set: one each flat, hand, round, half round, 3 plus 11x standard length masonry drills.
square and square 18x nut driver bits.
• 12 piece 2nd cut needle file set: 1x screw finder.
1 each hand, flat, knife, round, 9x flat wood bits.
half round, square, 3 square, 17x woodworking drills.
crossing, round edge joint, 5x holesaw with mandrel.
slitting, warding and barrette 1x ruler. 1x centre punch.
• 2 of each grade 0, 1 and 2 1x ratcheting bit driver.
emery sheets 4x drill bit depth stop.
• 200mm/8” adjustable wrench 1x countersink.
• 18 blade metric/inch feeler 1x carpenter’s pencil.
gauge
• Magnetic pick-up tool extends
to 650mm
• 7.5m/25ft locking tape rule
• Snap-off blade knife
• Junior hacksaw
• 20 junior hacksaw blades
• 300mm (12”) hacksaw frame
• 6 hacksaw blades
• Shears
• 3 piece professional plier set
• 255mm straight jaw
grip wrench
• 6 x 150mm flat cold chisel
• 1lb ball pein hammer
• 175mm engineer’s scriber
• 30mm diameter inspection mirror
(extends to 650mm)
• Centre punch
• 150mm (6”) engineer’s
square
• 150mm (6”) pocket rule
• 100cc grease gun
• Eye loupe 162
107 PIECES
PIECES

Set contents may vary slightly according

to product development and availability.
Model Weight Order Code Price/1 Weight Order Code Price/1
Number each KEN-595 RM each SEN-595 RM
AET100 4.2kg -0500K 1628.00 3.4kg -3180K 371.00
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR 611
© 2018
 GROUP
595 TOOL KITS
49 Piece Computer
Technician’s Tool Kit
The kit is supplied in a Kennedy® professional tool and lap top bag.
Contents:
• Hexagon wrench set 1.5 to 6mm. • Precision nut driver set 3.0 to 5.0mm. • Flat blade precision tweezers 170mm.
• Sharp nose precision tweezers 115mm. • 3-in-1 multimeter. • Micro diagonal nipper 110mm. • Automatic wire stripper 0.2 to 6mm
capacity.• Insulated VDE screwdriver set: parallel: 2.5 x 85mm, 4.0 x 100mm, 5.5 x 125mm, 6.5 x 150mm; crosspoint: No.0 x 75mm,
No.1 x 100mm, No.2 x 100mm. • Crimping tool, capacity 8P8C/RJ-45, 6P/RJ-12, RJ-11 and 6P2C. • Cable ties, black, 2.5 x 160mm packet
of 100. • Precision screwdriver set (in zip case): parallel 1.4 x 40mm, 2.0 x 40mm, 2.4 x 75mm, 3.0 x 75mm and 4.0 x 100mm blade
length; crosspoint PH0-3 x 40mm, PH0-2 x 75mm, PH-0 x 75mm and PH1 x 100mm blade length. • ESD long nose pliers 130mm.
• ESD bent nose pliers 140mm. • ESD flat nose pliers 130mm. • Edison™ aluminium torch. • Black PVC insulation tape 19mm x 33m.
• Air duster 400ml. • Absorbent wipes (pack of 50). • Screen wipes (2x pack of 20). • 1x pair Polyco® pure dex anti-static gloves.
• Non-contact AC voltage detector. • Retractable blade knife. • Brushes: No.6 and No.10 flat fitch.

49
PIECES
HAND TOOLS

Order Code Price/1

KEN-595 RM Set contents may vary slightly according
-3200K 1676.00 to product development and availability.

122 Piece ‘Deluxe’ Service Engineer’s Tool Kit

This superb kit contains all the necessary tools for the service engineer in a sturdy aluminium case partitioned to keep tools
organised and readily accessible. 122
Contents: • 160mm combination plier.
PIECES
• Aluminium tool case. • 4 piece circlip plier set.
• Six piece 16cm needle file set. • 177mm locking pliers.
• 150mm adjustable wrench. • 115mm precision flat nose pliers.
• Digital multimeter. • 115mm precision long nose pliers.
• 125/250V mains tester. • 115mm precision nippers.
• 19mm x 33m insulation tape: • 115mm precision end cutting
black, red and green/yellow PVC. pliers.
• 25W soldering iron. • 165mm soft touch pliers.
• Cable stripping knife. • Pro-Torq grip screwdrivers with
• Desoldering gun. chrome vanadium blade: slotted
• 60/40 cored solder. 100 x 6mm; crosspoint 76mm x
• Butane soldering torch. No.0 and No.1, 6mm x No.2;
• Centre punch 2.4 x 3.2mm. supadriv 76mm x No.0
• 2x parallel pin punches. and 1, 4” x No.2; electrician’s
• 150mm/6” flexible rustless parallel 150 and 200 x 5mm.
rule. • Offset screwdrivers:
• Machinists scriber. 5mm x No.1, 6mm x No.2.
• Sharp nose tweezers. • Insulated screwdrivers:
• Flat blade tweezers. parallel 4 x 100mm, 1000V VDU,
• Eye loupe. slotted 5.5 x 125mm.
• Telescopic inspection mirror. • Torx screwdrivers: T6, T8 and T10.
• Magnetic pick up tool (extends to • 11 piece screwdriver and tool set.
550mm). • Nine piece 5.5 - 13mm
• 225g (1/2lb) ball pein hammer. combination spanner set.
• 31/2 oz cross pein hammer. • Seven piece electronic
• 7.5m/25ft steel tape. screwdriver set.
• Aluminium pocket torch. • Six piece 0 - 11 BA open ended
• Retractable knife. spanner set.
• Auto return utility knife. • Multi-purpose snips.
• Junior hacksaw and blade. • Seven piece metric hexagon
• 10 junior hacksaw blades. key set. Set contents may vary slightly according
• 150mm flat nose plier. • Multi-purpose oil. to product development and availability.
• 150mm insulation and wire • 20mm sash tool.
stripping plier. • 100 cable ties.
• 150mm wire crimper/stripper. • Scissors. Weight Order Code Price/1
• 160mm snipe nose plier. each KEN-595 RM
• 160mm diagonal cutting nipper. 14.0kg -3040K 5315.00

612 PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR

© 2018
 GROUP
595 TOOL KITS
49 Piece Computer
Technician’s Tool Kit
The kit is supplied in a Kennedy® professional tool and lap top bag.
Contents:
• Hexagon wrench set 1.5 to 6mm. • Precision nut driver set 3.0 to 5.0mm. • Flat blade precision tweezers 170mm.
• Sharp nose precision tweezers 115mm. • 3-in-1 multimeter. • Micro diagonal nipper 110mm. • Automatic wire stripper 0.2 to 6mm
capacity.• Insulated VDE screwdriver set: parallel: 2.5 x 85mm, 4.0 x 100mm, 5.5 x 125mm, 6.5 x 150mm; crosspoint: No.0 x 75mm,
No.1 x 100mm, No.2 x 100mm. • Crimping tool, capacity 8P8C/RJ-45, 6P/RJ-12, RJ-11 and 6P2C. • Cable ties, black, 2.5 x 160mm packet
of 100. • Precision screwdriver set (in zip case): parallel 1.4 x 40mm, 2.0 x 40mm, 2.4 x 75mm, 3.0 x 75mm and 4.0 x 100mm blade
length; crosspoint PH0-3 x 40mm, PH0-2 x 75mm, PH-0 x 75mm and PH1 x 100mm blade length. • ESD long nose pliers 130mm.
• ESD bent nose pliers 140mm. • ESD flat nose pliers 130mm. • Edison™ aluminium torch. • Black PVC insulation tape 19mm x 33m.
• Air duster 400ml. • Absorbent wipes (pack of 50). • Screen wipes (2x pack of 20). • 1x pair Polyco® pure dex anti-static gloves.
• Non-contact AC voltage detector. • Retractable blade knife. • Brushes: No.6 and No.10 flat fitch.

49
PIECES
HAND TOOLS

Order Code Price/1

KEN-595 RM Set contents may vary slightly according
-3200K 1676.00 to product development and availability.

122 Piece ‘Deluxe’ Service Engineer’s Tool Kit

This superb kit contains all the necessary tools for the service engineer in a sturdy aluminium case partitioned to keep tools
organised and readily accessible. 122
Contents: • 160mm combination plier.
PIECES
• Aluminium tool case. • 4 piece circlip plier set.
• Six piece 16cm needle file set. • 177mm locking pliers.
• 150mm adjustable wrench. • 115mm precision flat nose pliers.
• Digital multimeter. • 115mm precision long nose pliers.
• 125/250V mains tester. • 115mm precision nippers.
• 19mm x 33m insulation tape: • 115mm precision end cutting
black, red and green/yellow PVC. pliers.
• 25W soldering iron. • 165mm soft touch pliers.
• Cable stripping knife. • Pro-Torq grip screwdrivers with
• Desoldering gun. chrome vanadium blade: slotted
• 60/40 cored solder. 100 x 6mm; crosspoint 76mm x
• Butane soldering torch. No.0 and No.1, 6mm x No.2;
• Centre punch 2.4 x 3.2mm. supadriv 76mm x No.0
• 2x parallel pin punches. and 1, 4” x No.2; electrician’s
• 150mm/6” flexible rustless parallel 150 and 200 x 5mm.
rule. • Offset screwdrivers:
• Machinists scriber. 5mm x No.1, 6mm x No.2.
• Sharp nose tweezers. • Insulated screwdrivers:
• Flat blade tweezers. parallel 4 x 100mm, 1000V VDU,
• Eye loupe. slotted 5.5 x 125mm.
• Telescopic inspection mirror. • Torx screwdrivers: T6, T8 and T10.
• Magnetic pick up tool (extends to • 11 piece screwdriver and tool set.
550mm). • Nine piece 5.5 - 13mm
• 225g (1/2lb) ball pein hammer. combination spanner set.
• 31/2 oz cross pein hammer. • Seven piece electronic
• 7.5m/25ft steel tape. screwdriver set.
• Aluminium pocket torch. • Six piece 0 - 11 BA open ended
• Retractable knife. spanner set.
• Auto return utility knife. • Multi-purpose snips.
• Junior hacksaw and blade. • Seven piece metric hexagon
• 10 junior hacksaw blades. key set. Set contents may vary slightly according
• 150mm flat nose plier. • Multi-purpose oil. to product development and availability.
• 150mm insulation and wire • 20mm sash tool.
stripping plier. • 100 cable ties.
• 150mm wire crimper/stripper. • Scissors. Weight Order Code Price/1
• 160mm snipe nose plier. each KEN-595 RM
• 160mm diagonal cutting nipper. 14.0kg -3040K 5315.00

612 PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR

© 2018
 GROUP
TOOL KITS 595
102 Piece
Service Engineer’s Tool Kit
Contents • Offset screwdrivers:
102
PIECES
• Hi-impact mobile tool case. 5mm x No.1 and 6mm x No. 2.
• Six piece 16cm cut 2 needle file set. • 1000V VDU insulated
• 150mm chrome finish adjustable wrench. screwdrivers:
• 150mm mains tester range 125/250V. parallel 4 x 100mm;
• 19mm x 33m insulation tape: black, red slotted 5.5 x 125mm.
and green/yellow pvc. • Torx screwdrivers:
• Soldering iron 25W 240V. T6, T8 and T10.
• Desoldering gun. • 11 piece screwdriver
• Cable stripping knife. and tool set: parallel 1, 1.2,
• 17g 1.0mm diameter 60/40 cored solder. 1.4, 1.8, 2.4 and 3mm;
• Square head centre punch 3.2 x 100mm. crosspoint PHO-2, PHO and
• 150mm/6” flexible rustless rule. PH1, fine point awl and tweezers.
• Precision tweezers: 115mm sharp nose, • Seven piece electronic
120mm flat blade. • Eye loupe. screwdriver set:
• 30mm dia. telescopic inspection mirror parallel 1.4, 2, 2.4 and 3mm;
(handle expands to 480mm). crosspoint PHO-3, PHO-2 and PH0.
• 225g (1/2lb) ball pein hammer. • Six piece chrome
• 7.5m/25' steel tape. vanadium steel 0 - 11 BA
• 13 segment blade mini autolock open ended spanner set.
retractable knife. • 20mm diameter sash tool.
• Junior hacksaw frame c/w hardened blade. • Nine piece hex key set
• 10 junior hacksaw blades for metal. 1.5 - 10mm.
• 215mm plastic handle scissors. • Chrome vanadium
• Magnetic pick up tool. combination spanners: 5.5, 6,
• 160mm snipe nose pliers. 7, 8, 9 and 10mm.
• 160mm diagonal cutting nippers.
• 160mm combination pliers with side cutter.
• 150mm insulation and wire stripping pliers.
• 115mm precision flat nose pliers.
• 115mm precision long nose pliers.
• 115mm precision nippers.
• 115mm precision end cutting nippers.
• Pro-Torq grip screwdrivers with chrome
vanadium blade: slotted 100 x 6mm; Set contents may
crosspoint 76mm x No.0 and No.1,

HAND TOOLS
vary slightly
6mm x No.2; supadriv 76mm x No.0 and according to product Weight Order Code Price/1
No.1, 100mm x No.2; electricians': development each KEN-595 RM
parallel 150 and 200 x 5mm. and availability. 13.0kg -3020K 4157.00

56 Piece Standard Service Tool Kit

Suitable for use by service engineers, electricians and tradesmen.
All Kennedy industrial quality tools carry a quality guarantee.
56
PIECES
Contents: • Chrome vanadium blade
• 430 x 340 x 160mm ABS screwdrivers:
plastic, aluminium reinforced, crosspoint No.0, 1 and 2pt;
tool case. slotted 6mm; supadriv No.0,
• 150mm chrome adjustable 1 and 2pt.
wrench. • Offset screwdrivers:
• 19mm x 33m black PVC 5mm slot x No.1pt,
insulation tape. 6mm slot x No.2pt.
• 150mm mains tester range • Insulated screwdrivers:
125/250V. parallel 4 x 100mm 1000V VDU,
• Soldering iron 25W/240V. slotted 2.5 x 85mm.
• Desoldering gun. • 20mm sash tool.
• 17g 1.0mm diameter 60/40 • 11 piece screwdriver and tool set:
cored solder. parallel 1, 1.2, 1.4, 1.8,
• 115mm sharp nose precision 2.4 and 3mm;
tweezers. crosspoint PHO-2, PHO and PH1;
• 30mm diameter inspection fine point awl and tweezers.
mirror (handle extends up to • 9 piece hex key set
480mm). 1.5 - 10mm.
• 7.5m/25ft steel tape. • Chrome vanadium combination
• 13 segment-blade mini autolock spanners:
retract knife. 5.5, 6, 7, 8, 9 and 10mm.
• Junior hacksaw frame and blade.
• Magnetic pick up tool (extends to
550mm).
• 160mm snipe nose pliers.
• 160mm diagonal cutting nippers.
• 160mm engineer’s combination
pliers with side cutter.
• 150mm insulation and wire
stripping pliers. Set contents may
• 115mm precision nippers. vary slightly
• 115mm precision end cutting according to product
nippers. development
and availability.
Weight Order Code Price/1
each KEN-595 RM
6.8kg -3000K 2450.00
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR 613
© 2018
 GROUP
TOOL KITS 595
102 Piece
Service Engineer’s Tool Kit
Contents • Offset screwdrivers:
102
PIECES
• Hi-impact mobile tool case. 5mm x No.1 and 6mm x No. 2.
• Six piece 16cm cut 2 needle file set. • 1000V VDU insulated
• 150mm chrome finish adjustable wrench. screwdrivers:
• 150mm mains tester range 125/250V. parallel 4 x 100mm;
• 19mm x 33m insulation tape: black, red slotted 5.5 x 125mm.
and green/yellow pvc. • Torx screwdrivers:
• Soldering iron 25W 240V. T6, T8 and T10.
• Desoldering gun. • 11 piece screwdriver
• Cable stripping knife. and tool set: parallel 1, 1.2,
• 17g 1.0mm diameter 60/40 cored solder. 1.4, 1.8, 2.4 and 3mm;
• Square head centre punch 3.2 x 100mm. crosspoint PHO-2, PHO and
• 150mm/6” flexible rustless rule. PH1, fine point awl and tweezers.
• Precision tweezers: 115mm sharp nose, • Seven piece electronic
120mm flat blade. • Eye loupe. screwdriver set:
• 30mm dia. telescopic inspection mirror parallel 1.4, 2, 2.4 and 3mm;
(handle expands to 480mm). crosspoint PHO-3, PHO-2 and PH0.
• 225g (1/2lb) ball pein hammer. • Six piece chrome
• 7.5m/25' steel tape. vanadium steel 0 - 11 BA
• 13 segment blade mini autolock open ended spanner set.
retractable knife. • 20mm diameter sash tool.
• Junior hacksaw frame c/w hardened blade. • Nine piece hex key set
• 10 junior hacksaw blades for metal. 1.5 - 10mm.
• 215mm plastic handle scissors. • Chrome vanadium
• Magnetic pick up tool. combination spanners: 5.5, 6,
• 160mm snipe nose pliers. 7, 8, 9 and 10mm.
• 160mm diagonal cutting nippers.
• 160mm combination pliers with side cutter.
• 150mm insulation and wire stripping pliers.
• 115mm precision flat nose pliers.
• 115mm precision long nose pliers.
• 115mm precision nippers.
• 115mm precision end cutting nippers.
• Pro-Torq grip screwdrivers with chrome
vanadium blade: slotted 100 x 6mm; Set contents may
crosspoint 76mm x No.0 and No.1,

HAND TOOLS
vary slightly
6mm x No.2; supadriv 76mm x No.0 and according to product Weight Order Code Price/1
No.1, 100mm x No.2; electricians': development each KEN-595 RM
parallel 150 and 200 x 5mm. and availability. 13.0kg -3020K 4157.00

56 Piece Standard Service Tool Kit

Suitable for use by service engineers, electricians and tradesmen.
All Kennedy industrial quality tools carry a quality guarantee.
56
PIECES
Contents: • Chrome vanadium blade
• 430 x 340 x 160mm ABS screwdrivers:
plastic, aluminium reinforced, crosspoint No.0, 1 and 2pt;
tool case. slotted 6mm; supadriv No.0,
• 150mm chrome adjustable 1 and 2pt.
wrench. • Offset screwdrivers:
• 19mm x 33m black PVC 5mm slot x No.1pt,
insulation tape. 6mm slot x No.2pt.
• 150mm mains tester range • Insulated screwdrivers:
125/250V. parallel 4 x 100mm 1000V VDU,
• Soldering iron 25W/240V. slotted 2.5 x 85mm.
• Desoldering gun. • 20mm sash tool.
• 17g 1.0mm diameter 60/40 • 11 piece screwdriver and tool set:
cored solder. parallel 1, 1.2, 1.4, 1.8,
• 115mm sharp nose precision 2.4 and 3mm;
tweezers. crosspoint PHO-2, PHO and PH1;
• 30mm diameter inspection fine point awl and tweezers.
mirror (handle extends up to • 9 piece hex key set
480mm). 1.5 - 10mm.
• 7.5m/25ft steel tape. • Chrome vanadium combination
• 13 segment-blade mini autolock spanners:
retract knife. 5.5, 6, 7, 8, 9 and 10mm.
• Junior hacksaw frame and blade.
• Magnetic pick up tool (extends to
550mm).
• 160mm snipe nose pliers.
• 160mm diagonal cutting nippers.
• 160mm engineer’s combination
pliers with side cutter.
• 150mm insulation and wire
stripping pliers. Set contents may
• 115mm precision nippers. vary slightly
• 115mm precision end cutting according to product
nippers. development
and availability.
Weight Order Code Price/1
each KEN-595 RM
6.8kg -3000K 2450.00
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR 613
© 2018
 GROUP
595 TOOL KITS
16 Piece Electrician’s 10 Piece 1000V Dual Grip Screwdriver &
VDE Tool Bag & Kit Plier Set
Heavy duty tear-resistant tool bag with Hook-n-Loop fastening flap. Fully insulated professional high grip dual material handles that are
Double webbed shoulder strap fixed with metal release clasps. VDE tested up to 1000V. Screwdrivers have magnetic tips, chrome
Two removable tool boards inside which have a unique tool storage vanadium steel blades and a hanging hole. Pliers have chrome
securing system built in. All tools are VDE approved. vanadium steel double polished head and joint heads.
Contents: Contents:
• Electrician's tool bag (320 x 340 x 125mm). Screwdrivers:
• 150mm euro tester will detect ‘live’ electricity supply. Suitable for Crosspoint:
AC to 125 - 250V, 3mm wide tip. Conform to VDE 0630 Part 4. No.0 x 60mm,
• 145mm (53/4”) Pro-Torq grip diagonal nippers, 1000V insulated. CROSS No.1 x 80mm,
• 160mm (63/8”) Pro-Torq snipe nose pliers, 1000V insulated. POINT
No.2 x 100mm.
• 165mm (61/2”) Pro-Torq engineer’s combination pliers, Parallel:
1000V insulated. 2.5 x 75mm,
• 170mm (63/4”) Pro-Torq wire strippers, 1000V insulated. 4.0 x 100mm,
• 7 piece VDE dual grip screwdriver set: No.0 x 60, No.1 x 80 PARALLEL 5.5 x 125mm,
and No.2 x 100mm, 2.5 x 75, 4.0 x 100, 5.5 x 125 and 6.5 x 150mm.
6.5 x 150mm. Pliers:
• 180mm (7”) insulated cable knife, curved blade. • 63/8” Pro-Torq snipe nose pliers,
• 2x small parts storage boxes. • 61/4” Pro-Torq grip nipper pliers,
• 61/2” Pro-Torq engineering
combination pliers.

16
PIECES
Width Depth Height Order Code Price/1
HAND TOOLS

(mm) (mm) (mm) KEN-595 RM

320 125 340 -3400K 955.00 10
PIECES
17 Piece ‘Live Line’ VDE Tool Kit
Contents: Weight Order Code Price/1
• Tear-resistant tool roll (600 x 300mm). each KEN-595 RM
• 190mm euro tester - will detect ‘live’ electricity supply. Suitable for 1.4kg -1600K 372.00
AC to 125 - 250V. 3mm wide tip. Conform to VDE 0630 Part 4.
• 145mm (61/4”) Pro-Torq grip diagonal nippers, 1000V insulated.
• 160mm (63/8”) wire strippers. 7 Piece
• Engineer’s combination pliers and snipe nose pliers, Maintenance Tool Kit
1000V insulated. MTK7
• 240mm (91/2”) water pump box joint pliers, 1000V insulated. Contents:
• 200mm adjustable wrench 1000V insulated. • Chrome adjustable
• 7 piece insulated VDE screwdriver set: wrench.
parallel: 2.5 x 85, 4.0 x 100, 5.5 x 125 • Slotted electrician’s VDE
and 6.5 x 150mm; crosspoint: No.0 x 75, screwdriver.
No.1 x 100 and No.2 x 200mm. • Slip joint pliers.
• 180mm (7”) insulated cable • High tensile diagonal
knife curved blade. cutting nippers.
• 210mm (81/4”) cable cutter. • Universal combination
pliers.
Both rolls have a riveted • No.2 crosspoint
carry handle on the outside. engineer’s screwdriver.
• Flared slotted
engineer’s screwdriver.
• PVC tool roll.

17 7
PIECES PIECES

Width Depth Height Order Code Price/1 Weight Order Code Price/1
(mm) (mm) (mm) KEN-595 RM each KEN-595 RM
320 125 340 -3420K 1328.00 1.3kg -0070K 346.00

614 PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2018

 GROUP
595 TOOL KITS
16 Piece Electrician’s 10 Piece 1000V Dual Grip Screwdriver &
VDE Tool Bag & Kit Plier Set
Heavy duty tear-resistant tool bag with Hook-n-Loop fastening flap. Fully insulated professional high grip dual material handles that are
Double webbed shoulder strap fixed with metal release clasps. VDE tested up to 1000V. Screwdrivers have magnetic tips, chrome
Two removable tool boards inside which have a unique tool storage vanadium steel blades and a hanging hole. Pliers have chrome
securing system built in. All tools are VDE approved. vanadium steel double polished head and joint heads.
Contents: Contents:
• Electrician's tool bag (320 x 340 x 125mm). Screwdrivers:
• 150mm euro tester will detect ‘live’ electricity supply. Suitable for Crosspoint:
AC to 125 - 250V, 3mm wide tip. Conform to VDE 0630 Part 4. No.0 x 60mm,
• 145mm (53/4”) Pro-Torq grip diagonal nippers, 1000V insulated. CROSS No.1 x 80mm,
• 160mm (63/8”) Pro-Torq snipe nose pliers, 1000V insulated. POINT
No.2 x 100mm.
• 165mm (61/2”) Pro-Torq engineer’s combination pliers, Parallel:
1000V insulated. 2.5 x 75mm,
• 170mm (63/4”) Pro-Torq wire strippers, 1000V insulated. 4.0 x 100mm,
• 7 piece VDE dual grip screwdriver set: No.0 x 60, No.1 x 80 PARALLEL 5.5 x 125mm,
and No.2 x 100mm, 2.5 x 75, 4.0 x 100, 5.5 x 125 and 6.5 x 150mm.
6.5 x 150mm. Pliers:
• 180mm (7”) insulated cable knife, curved blade. • 63/8” Pro-Torq snipe nose pliers,
• 2x small parts storage boxes. • 61/4” Pro-Torq grip nipper pliers,
• 61/2” Pro-Torq engineering
combination pliers.

16
PIECES
Width Depth Height Order Code Price/1
HAND TOOLS

(mm) (mm) (mm) KEN-595 RM

320 125 340 -3400K 955.00 10
PIECES
17 Piece ‘Live Line’ VDE Tool Kit
Contents: Weight Order Code Price/1
• Tear-resistant tool roll (600 x 300mm). each KEN-595 RM
• 190mm euro tester - will detect ‘live’ electricity supply. Suitable for 1.4kg -1600K 372.00
AC to 125 - 250V. 3mm wide tip. Conform to VDE 0630 Part 4.
• 145mm (61/4”) Pro-Torq grip diagonal nippers, 1000V insulated.
• 160mm (63/8”) wire strippers. 7 Piece
• Engineer’s combination pliers and snipe nose pliers, Maintenance Tool Kit
1000V insulated. MTK7
• 240mm (91/2”) water pump box joint pliers, 1000V insulated. Contents:
• 200mm adjustable wrench 1000V insulated. • Chrome adjustable
• 7 piece insulated VDE screwdriver set: wrench.
parallel: 2.5 x 85, 4.0 x 100, 5.5 x 125 • Slotted electrician’s VDE
and 6.5 x 150mm; crosspoint: No.0 x 75, screwdriver.
No.1 x 100 and No.2 x 200mm. • Slip joint pliers.
• 180mm (7”) insulated cable • High tensile diagonal
knife curved blade. cutting nippers.
• 210mm (81/4”) cable cutter. • Universal combination
pliers.
Both rolls have a riveted • No.2 crosspoint
carry handle on the outside. engineer’s screwdriver.
• Flared slotted
engineer’s screwdriver.
• PVC tool roll.

17 7
PIECES PIECES

Width Depth Height Order Code Price/1 Weight Order Code Price/1
(mm) (mm) (mm) KEN-595 RM each KEN-595 RM
320 125 340 -3420K 1328.00 1.3kg -0070K 346.00

614 PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2018

 GROUP
ENGINEER’S HAND TOOLS 518
Feeler Gauges Telescopic Gauges
Hardened and polished taper blades, With knurled satin finish bodies
enclosed in a steel case. Blades are clearly providing positive adjustment of the
Screw Cutting Gauge marked for easy identification. hardened and radius ground plungers
Manufactured from hardened and polished Metric: ensuring accurate measurement of the
steel to check BA, Whitworth and BSF, Acme Manufactured internal diameter when used with a
and American Screw Threads. to DIN 2275. micrometer. For smaller diameter

and BSF, 471/2° BA and 141/2° Acme.

Angles: 60° American and Metric, 55° Whit Part 1 (Metric). measurements use the small hole gauge.
Range:
10 Blade:
.05 - .80mm.
13 and
20 Blade:
.05 - 1mm.

Number of Weight Order Code Price/1

Blades each KEN-518 RM
10 55g -0710K 14.50
Order Code Price/1 13 70g -0740K 18.60
KEN-518 RM 20 100g -0780K 29.40
-0800K 39.00
Inch: Manufactured to DIN 2275.
Standard Wire Gauges 4” Blade length. Range Length Order Code Price/1
Range: mm inch (mm) KEN-518 RM
Manufactured from high grade tool steel with 10, 18 and
satin brushed finish. Each slot is marked with 26 Blade: 8 - 12 5/16”- 1/2” 115 -1174K 26.00
12 - 19 1/2”- 4”
3/ 115 -1175K 26.00
the nominal size. .0015” - .025”. 19 - 32 3/4”- 11/4” 115 -1176K 26.00
32 - 54 11/4”- 21/8” 137 -1177K 29.00
54 - 90 21/8”- 31/2” 137 -1178K 29.00
90 -150 31/2”- 6” 137 -1179K 30.00

Set
Supplied in a size marked PVC 6
storage wallet, with stud fastening. PIECES
Contains 1 of each size A - F inclusive.
No of Weight Order Code Price/1 Set range: 8 - 150mm (5/16” - 6”).

HAND TOOLS
Blades each KEN-518 RM
10 40g -0610K 16.00
18 65g -0650K 24.00
Range of Order Code Price/1 26 90g -0690K 31.00
sizes KEN-518 RM
1 - 36SWG
0.2 - 10.0mm
-1160K
-1165K
107.00
102.00
Double Ended Feeler Gauge
Hardened and polished taper blades
enclosed in a steel case. Blades are clearly
Drill Gauges marked. Manufactured to DIN 2275.
Manufactured from hardened steel with a Blade length: 75mm/3”.
satin finish. An ideal way to quickly measure Range:
the diameter of drills and steel wire. Metric: 0·05 - 0·5mm.
Inch: 0.0015” - 0.025”.

Weight Order Code Price/1

Range of Order Code Price/1 No. of Weight Order Code Price/1 each KEN-518 RM
sizes KEN-518 RM Blades each KEN-518 RM
1.5 - 12.5mm -1130K 111.00 425g -1180K 159.00
1/16 - 1/2” -1140K 102.00 18 60g -0790K 34.00
Small Hole Gauge Set
Drill Gauges Double Ended Range 3mm (1/8”) to 13mm (1/2”) 4
Feeler Gauge The knurled handle allows fine PIECES
Manufactured from hardened steel with a
satin finish. An ideal way to quickly measure Hardened and polished. Blade etched adjustment of the gauge within the
the diameter of drills and steel wire. with size. Manufactured to DIN 2275. workpiece. Use in conjunction with a
Blade length: 75mm/6”. micrometer to accurately measure internal
1 - 60 Gauge dimensions.
Measures drill sizes Nos 1 - 60. Holes are Range:
marked with size and decimal equivalent of Metric: 0·05 - 0·5mm. Contents: 90, 99, 110 and 110mm overall
drill. Inch: 0·0015” - 0·025”. length.

Order Code Price/1 Number Weight Order Code Price/1 Order Code Price/1
KEN-518 RM of Blades each SEN-518 RM KEN-518 RM
-1100K 105.00 18 60g -5790K 30.00 -1150K 112.00
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR 389
© 2018
 GROUP
518 ENGINEER’S HAND TOOLS
Automatic Standard Duty Heavy Duty
Strength of punch and depth of depression is Strength of punch and depth of
Centre Punches adjustable by turning the knurled head. depression is adjustable by turning
Light Duty Delivers a punch between 2.25 to 13.5kg the knurled head. Delivers a punch between
Delivers a punch between 1.5 to 5.0kg when (5 to 30lb). 6.3 to 22.5kg (14 to 50lb).
head is depressed. Chrome vanadium tip
with rubber sheathed steel body.

Length Order Code Price/1

(mm) KEN-518 RM Length Order Code Price/1 Length Order Code Price/1
140 -1750K 100.00 (mm) KEN-518 RM (mm) KEN-518 RM
Spare Point -1800K 25.00 120 -1710K 107.00 149 -1720K 163.00

Square Head Centre Punches Nail Punches Standard Length

Non-roll. Manufactured from hardened and Cupped and bevelled precision ground points Inserted Pin Punches
tempered steel with a knurled body for provide accurate positioning over the nail Manufactured
positive grip. Precision ground 60° point for head for efficient depression. Manufactured from chrome
accurate marking of workpiece. from hardened and tempered steel, with a vanadium
Conform to BS 3066. knurled body for extra grip. steel.
Overall length: Conform to BS 3066. (Hardness: heads Used for
100mm (4”). 42 HRC. Max: points 52 - 58 HRC). punching
Overall length: 100mm (4”). out pins and
dowels.

4 6
PIECES
PIECES

4 Size
(mm)
Overall
Length (mm)
Order Code
KEN-518
Price/1
RM
HAND TOOLS

PIECES 2 115 -2412K 18.00

*Round 3 125 -2413K 21.00
headed. 4 150 -2414K 24.00
Point Diameter Order Code Price/1 5 165 -2415K 27.00
(mm) KEN-518 RM 6 180 -2416K 30.00
100mm (4”) Overall Length 8 200 -2418K 33.00
3.2 (1/8”) -2050K 11.00 Set
4.0 (5/32”) -2060K 12.00 Point Diameter Order Code Price/1
4.8 (3/16”) -2070K 13.00 (mm) KEN-518 RM Supplied in plastic wallet.
6.3 (1/4”) -2090K 14.00 1.6 (1/16”) -2220K 11.00 Contents: 2, 3, 4, 5, 6 and 8mm.
125mm (5”) Overall Length 2.4 (3/32”) -2230K 12.00 Number Order Code Price/1
6.3 (1/4”) -2110K 12.00 3.2 (1/8”) -2250K 13.00 of Pieces KEN-518 RM
9.5 (3/8”)* -2120K 19.00 4.0 (5/32”) -2270K 14.00
6 -2420K 149.00
Set Set
Supplied in plastic wallet. Supplied in plastic wallet. Extra Length
Contents: 1x 3.2, 4, 4.8 and 6.4 x 100mm. Contents: 1.6, 2.4, 3.2 and 4mm. Inserted
Number
of Pieces
Order Code
KEN-518
Price/1
RM
Number
of Pieces
Order Code
KEN-518
Price/1
RM Pin Punches
4 -2100K 56.00 4 -2300K 52.00 Manufactured from
chrome vanadium
steel. Used for
Centre Punches Reduced Shank Wad Punches punching out pins
Ideal for driving tight fitting pins out of For a variety of soft materials. Can be used and dowels.
mechanical assemblies or realigning holes to for cutting holes and producing clean edged
fit dowel pins. Made from chrome vanadium discs from the material being cut.
steel with high
strength octagonal
shanks and
featuring
6
PIECES
cushioned grip
handles with
shock absorbing
air pockets. Size Overall Order Code Price/1
Overall length: (mm) Length (mm) KEN-518 RM
150mm (6”). 2 143 -2422K 20.00
3 155 -2423K 23.00
4 185 -2424K 26.00
5 202 -2425K 29.00
6 209 -2426K 32.00
Point Dia. Order Code Price/1 8 219 -2428K 35.00
(mm) KEN-518 RM 10 230 -2430K 38.00
2.0 -2332K 23.00 Cut Dia. Overall Order Code Price/1
3.0 -2333K 23.00 (mm) Length KEN-518 RM Set
4.0 -2334K 23.00 29 (11/8”) 175mm -1594K 143.00 Supplied in plastic wallet.
5.0 -2335K 23.00 32 (11/4”) 175mm -1595K 150.00 Contents: 2, 3, 4, 5, 6 and 8mm.
6.0 -2336K 23.00 35 (13/8”) 205mm -1596K 184.00
8.0 -2337K 23.00 Number Order Code Price/1
38 (11/2”) 205mm -1597K 192.00 of Pieces KEN-518 RM
Set of 6 pieces 45 (125/32”) 210mm -1598K 235.00
as above -2331K 192.00 6 -2435K 165.00
50 (2”) 210mm -1599K 244.00

390 PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR © 2018

 GROUP
TAPE MEASURES 536
Steel Tape Surveyor’s Fibreglass Tape Measures
Measures A high tensile strength fibreglass tape that will never kink or rust. It
Non-reflective steel tape with nylon coated blade for maximum is white on one side and yellow on the other to help prevent twisting
durability. The tape is housed in a high impact ABS plastic case with and the blade is double-coated to protect the markings which feature
flush winding handle and belt clip. For ease of use, the tape is both metric and imperial measurements. Housed in a robust ABS
finished off with a handy plastic loop and metal end hook. open frame with folding end claw and large D type handle with rubber
insert for a comfort grip. It also has a quick, 2x fast retraction
function and marking spike.

HAND TOOLS
Blade Order Code Price/1 Blade Order Code Price/1
Length KEN-536 RM Length KEN-536 RM
20m/66’ -3720K 75.00 50m/165’ -3960K 167.00
30m/100’ -3740K 89.00 100m/330’ -3990K 267.00

Fibreglass Tape Metric Measuring Wheel

Measures Robust, lightweight design with impact-resistant wheel and patented
A high tensile strength fibreglass blade that is both water- and gear transmission structure with weather-resistant housing. Folding
corrosion-proof. It has an easy to read dual scale (metric and aluminium handle automatically 'clicks' into extended position. Five
imperial), reinforced blade tip and metal end claw. The tape is digit counter. 2 reset buttons. Spring loaded kickstand. 'Exact Point'
presented in an impact resistant ABS plastic case with flush fitting indicator. Trigger operated brake. Supplied with carry case.
winding handle and convenient
strap handle.

new

Blade Blade Order Code Price/1

Length Width SEN-536 RM
10m/33’ 9.5mm -2420K 59.00 Wheel Length Weight Order Code Price/1
20m/66’ 9.5mm -2440K 71.00 Diameter (Extended/Folded) each KEN-536 RM
30m/100’ 9.5mm -2460K 91.00 319mm 995/505mm 1.96kg -9010K 588.00
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR 437
© 2018
 MEASURING TOOLS

ROAD MEASURING
WHEEL

Wheel diameter of 318mm and circumference of 1m, this

measuring wheel is easy to read with pointers that indicate then
start position and the ability to add forward and subtracts in
reverse. With robust construction it is easy to fold and carry.
Measures up to 99999.9metres/feet with an accuracy of +1%
www.clarkehandtools.com

PRT No Description PKT QTY CRTN QTY

RMWC Up to 99999.9m/feet 1 4

Industrial tooling solutions

Copyright 2020 © Clarke Industrial Co. UK Ltd

 GROUP
KNIVES 537
Utility Autoload &
Knives Lock Knives
A range of knives with contoured moulded grips and steel slides that ABS plastic with rubber coating for extra grip, steel blade slides which
prevent blade slippage or case splitting and gives the knife a smooth prevent blade slippage or case splitting and gives the knife a smooth
action. Snap-off blade knives have a blade locking mechanism in the action. Snap off blade. Unique spring loaded automatic blade
thumb slide. Replacement blades available on request. replacement.
Snap-off Blade
8 segment, 18mm
heavy duty.
- 0720K

Overall Weight Order Code Price/1

Length each SEN-537 RM
130mm 60g -0330K 6.70
- 0740K
Snap-off Blade
13 segment, Overall Blade Weight Order Code Price/1
9mm standard. Length Segments each KEN-537 RM
140mm 13 65g -0720K 16.40
Overall Weight Order Code Price/1 170mm 8 165g -0740K 32.40
Length each SEN-537 RM
130mm 60g -0430K 2.60 Snap-off Blade Retractable Knives
Snap-off Blade Knife High strength ABS plastic construction with slider lock.
8 segment, 18mm Mini: 140mm. 9 x 91mm,
economy. 13 segment blade.

- 0310K
Overall Weight Order Code Price/1
Length each SEN-537 RM Standard: 160mm. 18 x 100mm, 8 segment blade.
130mm 60g -0410K 7.90

Trimming
Knives

HAND TOOLS
Turn anti-clockwise to unlock. Turn continuously to disassemble - 0350K
for blade change.
Overall Weight Order Code Price/1
Length each KEN-537 RM
140mm 32g -0310K 11.60
- 4650K 160mm 86g -0350K 18.60
Mini: 9 x 91mm,
13 segment blade.

Number of Order Code Price/Pk - 4620K

Segments YMT-537 RM Overall Weight Order Code Price/1
13 -4650K 24.60 Length each KEN-537 RM
8 -4620K 34.20
130mm 21g -0290K 3.30

Snap-off Standard: 18 x 100mm.

8 segment blade.
Knife Blades
Kennedy Industrial quality knife blades have a superior edge
hardening for longer tool life and sharper edge. Best value with longer
working between blade changes and with easy, safe segment-snap to
renew leading edge.

18 x 100mm - 8 segment
Overall Weight Order Code Price/1
Length each KEN-537 RM
160mm 38g -0370K 7.40

Ultra Slim
9 x 55mm - 7 segment Precision knife. Black coated. 13 segment, blade 9 x 91mm.

Overall Weight Order Code Price/1

9 x 91mm - 13 segments Length each KEN-537 RM
130mm 20g -0250K 6.20

Micro Knife
Overall Pack Weight Order Code Price/Pk 9 x 55mm, 8 segment blade,
Length Quantity each KEN-537 RM without slider lock.
10 72g -2050K 10.30
18 x 100 100 73g -2060K 96.40
9 x 55 100 143g -2020K 51.30 Overall Weight Order Code Price/1
10 23g -2110K 5.20 Length each KEN-537 RM
9 x 91 100 108g -2120K 48.40 80mm 70g -0200K 3.00
PRODUCTS ARE ONLY AVAILABLE VIA YOUR DISTRIBUTOR 439
© 2018