R&D Instrument Services

03tb

Universal Test Bench

*This image is for marketing purposes; the actual instrument may

UTB - Elevated Series

Test Bench
Size: 2000 x 1000 x 1485 mm (LBH)
Power supply of test bench
• 5 meters extension cable with plug to connect
the work bench
Work Table:
vary slightly*

• Work table frame structure is made up of 50 x

25 mm powder coated rectangular mild steel
tube.
• Work table top is made up of 25 mm thick chip
Bench-top panel: board suitably laminated & post formed.
• The bench top panel is constructed with 19 mm • Size: 2300 x 1000 x 780 mm (LBH)
thick chip board suitably laminated Mains Power Supply

The Information given in this document is subject to change due to continuous improvement without notice. All Rights Reserved by R&D Instrument Services, Chennai, India
• The front plates are fixed with top and bottom • 230 VAC, 50Hz Single Phase main power
profile run throughout the panel length supply
• The Front plates are made up of 3 mm high quality • Residual current circuit breaker (for operators
aluminum cut sheets pasted with 0.3 mm safety)
aluminum printed sticker with names, indication, -Rated fault current: 30 mA
cutouts, etc.. -Rated Current: 25 A
• All the instruments of different sizes & weights are -No. of poles: 2
duly mounted in the panel with good mounting • Miniature Circuit Breaker (for dry block
Product datasheet

base plates, fixtures as required with suitable cut temperature calibrator)

outs for easy frontal operations • Emergency off
• For others like switch, socket, MCB, etc., are • Power On Lamp
mounted or fixed by fixtures as required with AC Socket Panel
making suitable cut outs for easy frontal • Universal AC Socket 230 VAC / 15 A
operations • On-off switch with illumination
• The electrical wiring is done as per the standard • Step down Transformer (PRI) 230 VAC / 50
practice by using quality wires, crimping legs and Hz SEC 110 VAC / 2 A
proper ferruling for easy identifications and • Universal AC Socket 110 VAC / 2 A
troubleshooting in the future
• On-off switch with illumination
• The pneumatic tubing is made by using PVC or
Nylon hose or Copper or SS material depending Multifunction Calibrator-MCAL-20
upon the pressure rating. Normally, PVC or Nylon
• Ideal for calibration of thermocouples, RTDs,
hoses are used according to the withstanding rated
thermometers, transmitters,
pressure
indicators, controllers, receivers, mA, V, mV,
• Back of the panel are made up of 19 mm chip ohms, frequency measuring instruments etc..
board with inserted perforated mild steel
• Power Supply: 230 VAC, 50 Hz prewired with
ventilator arrangement with hinge and lock with
on off switch with illumination
key
• The back doors are easily openable for cleaning
Elevation Variable DC Power Supply
• and
340 mm fault finding
elevated or any
perforated othercoated
powder service
MS • Variable Output Range: 0 to 30 VDC
requirements
sheet • Variable Current Range: 0 to 2 A
• Size: 2250 x 450 x 340 mm (LBH)
• Power Supply: 230 VAC, 50 Hz
Under Bench Cabinet
• Trolley Type Fixed DC Power Supply
• Under bench cabinet is made up of chip board • 230 VAC, 50 Hz prewired with
suitably laminated and fascia • On Off switch with illumination
• Storage space with lockable drawers - 2 nos.,
10\24

• 24 VDC / 2 A Output port through banana

cupboard - 1 no. for keeping necessary stationary socket
items / tools and tackle, etc 1
• Size: 420 x 460 x 685 mm (LBH)
P100-D-V04 06/2012 www.eurotron-uk.com ISO 9001 Company
 R&D Instrument Services
03tb

Pressure Calibrator: Pneumatic APC PM - 5000LP* Pressure Calibrator: Hydraulic - APC PM700*
• Panel mounted Version • Panel mounted Version
• Range: 0 to 5000 mm WC with m A and V • Range: 0 to 700 Bar with mA and V
measurement measurement
• LP and HP ports • Transmitter power supply
• Transmitter power supply • On Off switch with illumination
• On Off switch with illumination • 230 VAC, 50 Hz power supply
• 230 VAC,50Hz power supply • External comparator pump with proper hose
• External Screw pump with proper hose and and fittings used for generation pressure
fittings used for generation vacuum as well as (either oil or water can be used)
pressure Air Set
• Other hand regulated or controlled air supply • Pressure gauge: 0 to 10 Bar or kg / cm2 *
through motorized vacuum and pressure can be • Pressure Regulator
used • Output port through quick connectors
• Input connected from the front side of the panel

The Information given in this document is subject to change due to continuous improvement without notice. All Rights Reserved by R&D Instrument Services, Chennai, India
Pressure Calibrator: Pneumatic - APC PM20*
• Panel mounted Version Dry Block Temperature Calibrator - 650 ATC*
• Range: -1 Vacuum to 20 Bar with mA and V • Range:50°C to 650°C
measurement • 0.05°C stability
• Transmitter power supply • Accuracy: ±0.4°C
• On Off switch with illumination • radial Uniformity: ±0.3°C with similar probes
• 230 VAC, 50 Hz power supply prewired • Mounted on the test bench surface as shown in
• External pneumatic hand pump with proper hose the GA drawing
Product datasheet

and fittings used for generation vacuum as well as

pressure Accessories
• Other hand regulated or controlled air supply • Necessary test leads to connect the input and
through motorized vacuum and pressure can also output of the power supplies, multi meter and
be used continuity tester
• Hose and connectors for air set * Accredited
(NABL) Calibration Certificate as per ISO/IEC
17025 Standard

Optional:
• Rubber mat
• Constant temperature liquid bath(CTB
series)
• High temperature dry block
calibrator(1200TS)
• Additional AC/DC power supplies
• Digital manometer
• Pressure calibrator
R&D Instrument Services • Precision digital indicators and gauges
• Provision for dead weight tester
5, Natesan Nagar, Alapakkam, • Calibration management software
Chennai 600116. Tamilnadu, INDIA. system
Tel.: +91-44-4283 9039 / 4284 1119 • Space for computer systems (CPU,
Mobile Nos.: +91-7358393981 / 7358393984 monitor, keyboard, mouse and printer)
email: [email protected] • Mobile/stationary under bench cabinets
[email protected] • Shelves and cabinets
Website: www.rndinstruments.com • Oil or water operated pressure
10\24

For Calibration: www.calibrationlab.in comparison pump

Manufacturer of Test benches • Compressor
Calibration Instruments 2
• Motorised vacuum pump
P100-D-V04 06/2012 www.eurotron-uk.com ISO 9001 Company