CAT 7a S/FTP LAN CABLES

Category 7a S/FTP 1000MHz LAN Cables

Canovate CAT 7A S/FTP LAN Data Cable is an enhanced per-
formance cable used for transmission of high speed data, dig-
ital and analogue voice and video RGB signals on LANs. It sup-
1000 MHz
ports Gigabit Ethernet (40G BASE-T) standard and operates at
bandwidths up to 1000 MHZ.

Product Application
• All Ethernet applications which includes
• 10 Base T (IEEE 802.3)
• 100 Base T (IEEE 802.3U)
• 100 Vg-Any LAN (IEEE 802.12)
• Token ring (IEEE 805.5)
• TP-PMD (ANSI X3T9.5)
• ATM 155
• 40G BASE-T Gigabit Ethernet
• Voice, Data, CATV & All sharing application up to 1000 MHz
• Applicable for power over ethernet POE/ POE+ /4PPoE up to 100W.

Product Benefits
The cable supports gigabit Ethernet protocol for installation in
horizontal and backbone applications.

Mechanical and Environmental Properties

Maximum tensile load 14 kg per simplex cable (installation)

8x outer diameter (installation)
Minimum bend radius
4x outer diameter (operation)
0°C to +50°C (installation)
Temperature
-10°C to +60°C (operation)

Electrical Properties (At 20°C)

Electrical Characteristics@ 20°C Specifications Typical Performance

Conductor loop resistance Max. 19.0 / 100m 14.5/ 100m

Conductor resistance unbalance Max. 2% 1.5%

Dielectric strength 1.0kV de or 0.7kV ac for 1 min 100% in process test

Insulation resistance 500M .km @ U 100-500 V test voltage >5 GQkm

Capacitance unbalance to earth Max. 330 pF/100m 330 pF/100m

496 nsec/100m @ 1000MHz
Velocity of propagation <538 nsec/100m@1000MHz
(NVP for hand held testers = 0.69)
Skew Max. 45 nsec/100m@ 1000MHz 30 nsec/100m@ 1000MHz

Characteristic impedance 100.0 +/- 15.0@ 1000MHz 100.0 +/- 10.0@ 1000MHz

Mutual capacitance 5.6nF/ 100m 5.6nF/ 100m

Order Information
Part No Type
KSF-L-KK-C7A-02-1 Cat.7A S/FTP Cable LSZH FR (Grey), 500m Reel
KSF-P-KK-C7A-02-1 Cat.7A S/FTP Cable PVC (Grey), 500m Reel
Cable Construction

Individual Pair Shielded with

AL/Polyester Foil

Sheath (PVC or LSZH)

Colored Insulation

Copper Conductor

Foam Insulation

Outer Screen of Tinned

Copper Braiding

Color Code
Pair Number Color
1-2 Blue-White
3-4 Orange-White
5-6 Green-White
7-8 Brown-White

Packaging
305 m - Reel in a box
500 m/ 1000 m - Wooden reel

Manufacturing Process
Canovate controls every stage of the manufacturing process so
that quality is built in to every meter of cable, rather than selected
out at the end through testing. To ensure the accuracy and preci-
sion of the manufacturing process, Canovate routinely calibrates
and recertifies process equipment and measurement benches
against internationally traceable standards from NPL/NIST and fol-
lows test methods compliant with EIA/TIA and IEC standards.

International Standards
• ISO/I EC11801 Class FA
• ISO/I EC61156-5
• EN50173-1:2002
• EN50288-9-1
• ANSI/TIA/EIA568B.2:2002
• IEEE 802.3at
• Cat 7A / Class FA - limit values as specified by IEC 61156-5
and EN 50288-9-1 guaranteed
• IEC 60754-1/-2, EN 60754-1/-2,
Everon Copper Datacom ™

Cat.6A Shielded, E500S, VOL Footprint

RJ45 Cat.6A Jacks STP (E500S)

Copper Patch Cords
Copper Patch Panels
Faceplates & Wall Outlets
Copper Cable

Corning Optical Communications Corning® Everon™ Copper Datacom, E500S | LAN-2620-A4-BEN | Page 1
RJ45 Cat.6A STP Jacks, E500S
Our Cat.6A copper interconnect products work together
to provide an easy-to-use solution for deploying
high-speed connections throughout a building. The
RJ45 jack is a key component in this system.
The traditional one-click design enables an easy,
tool-less termination on shielded cables, meeting
industry performance standards.

Features Benefits
Tool-less jack Easy and quick to install.
Fast, reliable connection. All eight copper conductors are wired in a single operation.
Quality of connection by design: Just listen for the click.

Installation features Easier cable management.

More space and flexibility to ensure the cable minimum bend radius is not compromised.
Enables a wide range of cable routing options. Easy to use in tight spaces.
Just one product for all applications

360° metallic shielding Virtually eliminates alien crosstalk for good EMC and ANEXT performance

Reusable If a wiring mistake is made, there is no need to use a new jack, which means virtually
no wasted inventory.

Clip-in mounting RJ45 modular jack design can fit many other accessories on the market using the
standard clip-in mounting.

Accepts solid and stranded conductors Compatible with many cables on the market and enables “jack-to-plug” cables to be
manufactured using stranded conductors (for use in open-office architectures).

Integral shutter Increased dust protection, especially during installation or in a dirty environment.
No additional shuttering required on faceplates.

Corning Optical Communications Corning® Everon™ Copper Datacom, E500S | LAN-2620-A4-BEN | Page 2
 Specifications
Standards compliance Use in permanent links with dedicated cable types results in compliance
with ISO/IEC 11801 (Ed. 1.0) 2017 or EN 50173-1:2018 Class EA and Category 6A
and ANSI/TIA/568.2-D:2018

Electrical performance
Operating voltage < 75 VDC
Lead-through resistance < 200 mΩ
Insulation resistance > 500 MΩ

Environmental compliance
Operating temperature -10°C to 60°C (14°F to 140°F)

Mechanical specifications
Conductor diameter Solid wires: 0.50 to 0.65 mm (AWG 22-24)
Stranded wires: 7 x 0.15 to 0.20 mm

Maximum diameter of wire insulation 1.6 mm

Protection contacts 0.75 µm in contact zone

RJ45 E500S Jack Ordering Information

Jack Quantity AWG AWG Channel PoE / Transmission Legacy Part
Part Number Description Footprint
Colour in Pack Solid Flex Performance PoE + Speed Number
Class EA Channel
DE010022734 E500S 1 Way Jack VOL Silver 8 22-24 24-26 PoE / PoE+ 10GbE OCK6AS-E8
(3 connectors)

Class EA Channel
DE010022742 E500S 1 Way Jack VOL Silver 480 22-24 24-26 PoE / PoE+ 10GbE OCK6AS-EV
(3 connectors)

Corning Optical Communications Corning® Everon™ Copper Datacom, E500S | LAN-2620-A4-BEN | Page 3