Debian Developer’s Reference

Release 13.15

Developer’s Reference Team

2024-11-04
 CONTENTS

1 Scope of This Document 3

2 Applying to Become a Member 5

2.1 Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.2 Debian mentors and sponsors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.3 Registering as a Debian member . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

3 Debian Developer's Duties 9

3.1 Package Maintainer's Duties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.1.1 Work towards the next stable release . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.1.2 Maintain packages in stable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3.1.3 Manage release-critical bugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3.1.4 Coordination with upstream developers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3.2 Administrative Duties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3.2.1 Maintaining your Debian information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.2.2 Maintaining your public key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.2.3 Voting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.2.4 Going on vacation gracefully . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.2.5 Retiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.2.6 Returning after retirement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

4 Resources for Debian Members 15

4.1 Mailing lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4.1.1 Basic rules for use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4.1.2 Core development mailing lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4.1.3 Special lists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4.1.4 Requesting new development-related lists . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4.2 IRC channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4.3 Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.4 Debian machines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.4.1 The bugs server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.4.2 The ftp-master server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
4.4.3 The www-master server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
4.4.4 The people web server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
4.4.5 salsa.debian.org: Git repositories and collaborative development platform . . . . . . . . . . 18
4.4.6 GitHub.com: Submitting pull requests to upstream repositories . . . . . . . . . . . . . . . . 19
4.4.7 chroots to different distributions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
4.5 The Developers Database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
4.6 The Debian archive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
4.6.1 Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

i
 4.6.2 Architectures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
4.6.3 Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
4.6.4 Distributions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
4.6.4.1 Stable, testing, and unstable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
4.6.4.2 More information about the testing distribution . . . . . . . . . . . . . . . . . . . . 24
4.6.4.3 Experimental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
4.6.5 Release code names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
4.7 Debian mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
4.8 The Incoming system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
4.9 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
4.9.1 On the web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
4.9.2 The dak ls utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
4.10 The Debian Package Tracker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
4.11 Developer's packages overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
4.12 Debian's FusionForge installation: Alioth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
4.13 Goodies for Debian Members . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

5 Managing Packages 29
5.1 New packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
5.2 Recording changes in the package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
5.3 Testing the package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
5.4 Layout of the source package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
5.5 Picking a distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
5.5.1 Special case: uploads to the stable and oldstable distributions . . . . . . . . . . . . . . 32
5.5.2 Special case: the stable-updates suite . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
5.5.3 Special case: uploads to testing/testing-proposed-updates . . . . . . . . . . . . . . 33
5.6 Uploading a package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
5.6.1 Source and binary uploads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
5.6.2 Uploading to ftp-master . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
5.6.3 Delayed uploads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
5.6.4 Security uploads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
5.6.5 Other upload queues . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
5.6.6 Notifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
5.7 Specifying the package section, subsection and priority . . . . . . . . . . . . . . . . . . . . . . . . . 35
5.8 Handling bugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
5.8.1 Monitoring bugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
5.8.2 Responding to bugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
5.8.3 Bug housekeeping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
5.8.4 When bugs are closed by new uploads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
5.8.5 Handling security-related bugs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
5.8.5.1 Debian Security Tracker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
5.8.5.2 Confidentiality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
5.8.5.3 Security Advisories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
5.8.5.4 Preparing packages to address security issues . . . . . . . . . . . . . . . . . . . . . 40
5.8.5.5 Uploading the fixed package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
5.9 Moving, removing, renaming, orphaning, adopting, and reintroducing packages . . . . . . . . . . . . 42
5.9.1 Moving packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
5.9.2 Removing packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
5.9.2.1 Removing packages from Incoming . . . . . . . . . . . . . . . . . . . . . . . . . 44
5.9.3 Replacing or renaming packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
5.9.4 Orphaning a package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
5.9.5 Adopting a package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
5.9.6 Reintroducing packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
5.10 Porting and being ported . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

ii
 5.10.1 Being kind to porters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
5.10.2 Guidelines for porter uploads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
5.10.2.1 Recompilation or binary-only NMU . . . . . . . . . . . . . . . . . . . . . . . . . 47
5.10.2.2 When to do a source NMU if you are a porter . . . . . . . . . . . . . . . . . . . . 48
5.10.3 Porting infrastructure and automation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
5.10.3.1 Mailing lists and web pages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
5.10.3.2 Porter tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
5.10.3.3 wanna-build . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
5.10.4 When your package is not portable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
5.10.5 Marking non-free packages as auto-buildable . . . . . . . . . . . . . . . . . . . . . . . . . 50
5.11 Non-Maintainer Uploads (NMUs) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
5.11.1 When and how to do an NMU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
5.11.2 NMUs and debian/changelog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
5.11.3 Using the DELAYED/ queue . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
5.11.4 NMUs from the maintainer's point of view . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
5.11.5 Source NMUs vs Binary-only NMUs (binNMUs) . . . . . . . . . . . . . . . . . . . . . . . 52
5.11.6 NMUs vs QA uploads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
5.11.7 NMUs vs team uploads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
5.12 Package Salvaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
5.12.1 When a package is eligible for package salvaging . . . . . . . . . . . . . . . . . . . . . . . 54
5.12.2 How to salvage a package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
5.13 Collaborative maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
5.14 The testing distribution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
5.14.1 Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
5.14.2 Updates from unstable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
5.14.2.1 Out-of-date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
5.14.2.2 Removals from testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
5.14.2.3 Circular dependencies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
5.14.2.4 Influence of package in testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
5.14.2.5 Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
5.14.3 Direct updates to testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
5.14.4 Frequently asked questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
5.14.4.1 What are release-critical bugs, and how do they get counted? . . . . . . . . . . . . 59
5.14.4.2 How could installing a package into testing possibly break other packages? . . . . 59
5.15 The Stable backports archive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
5.15.1 Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
5.15.2 Exception to the testing-first rule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
5.15.3 Who can maintain packages in the stable-backports archive? . . . . . . . . . . . . . . . . . 60
5.15.4 When can one start uploading to stable-backports? . . . . . . . . . . . . . . . . . . . . . . 60
5.15.5 How long must a package be maintained when uploaded to stable-backports? . . . . . . . . 60
5.15.6 How often shall one upload to stable-backports? . . . . . . . . . . . . . . . . . . . . . . . . 61
5.15.7 How can one learn more about backporting? . . . . . . . . . . . . . . . . . . . . . . . . . . 61

6 Best Packaging Practices 63

6.1 Best practices for debian/rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
6.1.1 Helper scripts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
6.1.2 Separating your patches into multiple files . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
6.1.3 Multiple binary packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
6.2 Best practices for debian/control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
6.2.1 General guidelines for package descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . 65
6.2.2 The package synopsis, or short description . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
6.2.3 The long description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
6.2.4 Upstream home page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
6.2.5 Version Control System location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

iii
 6.2.5.1 Vcs-Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
6.2.5.2 Vcs-* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
6.3 Best practices for debian/changelog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
6.3.1 Writing useful changelog entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
6.3.2 Selecting the upload urgency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
6.3.3 Common misconceptions about changelog entries . . . . . . . . . . . . . . . . . . . . . . . 68
6.3.4 Common errors in changelog entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
6.3.5 Supplementing changelogs with NEWS.Debian files . . . . . . . . . . . . . . . . . . . . . . 69
6.4 Best practices around security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
6.5 Best practices for maintainer scripts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
6.6 Configuration management with debconf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
6.6.1 Do not abuse debconf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
6.6.2 General recommendations for authors and translators . . . . . . . . . . . . . . . . . . . . . 71
6.6.2.1 Write correct English . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
6.6.2.2 Be kind to translators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
6.6.2.3 Unfuzzy complete translations when correcting typos and spelling . . . . . . . . . 72
6.6.2.4 Do not make assumptions about interfaces . . . . . . . . . . . . . . . . . . . . . . 73
6.6.2.5 Do not use first person . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
6.6.2.6 Be gender neutral . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
6.6.3 Templates fields definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
6.6.3.1 Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
6.6.3.2 Description: short and extended description . . . . . . . . . . . . . . . . . . . . . 75
6.6.3.3 Choices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
6.6.3.4 Default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
6.6.4 Template fields specific style guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
6.6.4.1 Type field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
6.6.4.2 Description field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
6.6.4.3 Choices field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
6.6.4.4 Default field . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
6.7 Internationalization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
6.7.1 Handling debconf translations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
6.7.2 Internationalized documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
6.8 Common packaging situations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
6.8.1 Packages using autoconf/automake . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
6.8.2 Libraries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
6.8.3 Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
6.8.4 Specific types of packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
6.8.5 Architecture-independent data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
6.8.6 Needing a certain locale during build . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
6.8.7 Make transition packages deborphan compliant . . . . . . . . . . . . . . . . . . . . . . . . 80
6.8.8 Best practices for .orig.tar.{gz,bz2,xz} files . . . . . . . . . . . . . . . . . . . . . . 81
6.8.8.1 Pristine source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
6.8.8.2 Repackaged upstream source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
6.8.8.3 Changing binary files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
6.8.9 Best practices for debug packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
6.8.9.1 Automatically generated debug packages . . . . . . . . . . . . . . . . . . . . . . . 82
6.8.9.2 Manual -dbg packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
6.8.10 Best practices for meta-packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

7 Beyond Packaging 85
7.1 Bug reporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
7.1.1 Reporting lots of bugs at once (mass bug filing) . . . . . . . . . . . . . . . . . . . . . . . . 86
7.1.1.1 Usertags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
7.2 Quality Assurance effort . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

iv
 7.2.1 Daily work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
7.2.2 Bug squashing parties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
7.3 Contacting other maintainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
7.4 Dealing with inactive and/or unreachable maintainers . . . . . . . . . . . . . . . . . . . . . . . . . . 87
7.5 Interacting with prospective Debian developers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
7.5.1 Sponsoring packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
7.5.1.1 Sponsoring a new package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
7.5.1.2 Sponsoring an update of an existing package . . . . . . . . . . . . . . . . . . . . . 91
7.5.2 Granting upload permissions to DMs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
7.5.3 Advocating new developers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
7.5.4 Handling new maintainer applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

8 Internationalization and Translations 93

8.1 How translations are handled within Debian . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
8.2 I18N & L10N FAQ for maintainers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
8.2.1 How to get a given text translated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
8.2.2 How to get a given translation reviewed . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
8.2.3 How to get a given translation updated . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
8.2.4 How to handle a bug report concerning a translation . . . . . . . . . . . . . . . . . . . . . . 94
8.3 I18N & L10N FAQ for translators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
8.3.1 How to help the translation effort . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
8.3.2 How to provide a translation for inclusion in a package . . . . . . . . . . . . . . . . . . . . 95
8.4 Best current practice concerning l10n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

9 Overview of Debian Maintainer Tools 97

9.1 Core tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
9.1.1 dpkg-dev . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
9.1.2 debconf . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
9.1.3 fakeroot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
9.2 Package lint tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
9.2.1 lintian . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
9.2.2 lintian-brush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
9.2.3 piuparts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
9.2.4 debdiff . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
9.2.5 diffoscope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
9.2.6 duck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
9.2.7 adequate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
9.2.8 i18nspector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
9.2.9 cme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
9.2.10 licensecheck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
9.2.11 blhc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
9.3 Helpers for debian/rules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
9.3.1 debhelper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
9.3.2 dh-make . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
9.3.3 equivs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
9.4 Package builders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
9.4.1 git-buildpackage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
9.4.2 debootstrap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
9.4.3 pbuilder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
9.4.4 sbuild . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
9.5 Package uploaders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
9.5.1 dupload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
9.5.2 dput . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
9.5.3 dcut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

v
 9.6 Maintenance automation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
9.6.1 devscripts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
9.6.2 reportbug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
9.6.3 autotools-dev . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
9.6.4 dpkg-repack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
9.6.5 alien . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
9.6.6 dpkg-dev-el . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
9.6.7 dpkg-depcheck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
9.6.8 debputy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
9.7 Porting tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
9.7.1 dpkg-cross . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
9.8 Documentation and information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
9.8.1 debian-policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
9.8.2 doc-debian . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
9.8.3 developers-reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
9.8.4 maint-guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
9.8.5 debmake-doc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
9.8.6 packaging-tutorial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
9.8.7 how-can-i-help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
9.8.8 docbook-xml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
9.8.9 debiandoc-sgml . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
9.8.10 debian-keyring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
9.8.11 debian-el . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

vi
 Debian Developer’s Reference, Release 13.15

Developer's Reference Team <[email protected]>

• Copyright © 2019 - 2023 Holger Levsen
• Copyright © 2015 - 2020 Hideki Yamane
• Copyright © 2008 - 2015 Lucas Nussbaum
• Copyright © 2004 - 2007 Andreas Barth
• Copyright © 2002 - 2009 Raphaël Hertzog
• Copyright © 1998 - 2003 Adam Di Carlo
• Copyright © 1997 - 1998 Christian Schwarz
This manual is free software; you may redistribute it and/or modify it under the terms of the GNU General Public
License as published by the Free Software Foundation; either version 2, or (at your option) any later version.
This is distributed in the hope that it will be useful, but without any warranty; without even the implied warranty of
merchantability or fitness for a particular purpose. See the GNU General Public License for more details.
A copy of the GNU General Public License is available as /usr/share/common-licenses/GPL-2 in the Debian distribution
or on the World Wide Web at the GNU web site. You can also obtain it by writing to the Free Software Foundation,
Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
This is Debian Developer's Reference version 13.15, released on 2024-11-04.
If you want to print this reference, you should use the pdf version. This manual is also available in some other languages.

CONTENTS 1
Debian Developer’s Reference, Release 13.15

2 CONTENTS
 CHAPTER

ONE

SCOPE OF THIS DOCUMENT

The purpose of this document is to provide an overview of the recommended procedures and the available resources
for Debian developers and maintainers.
The procedures discussed within include how to become a member (Applying to Become a Member); how to create new
packages (New packages) and how to upload packages (Uploading a package); how to handle bug reports (Handling
bugs); how to move, remove, or orphan packages (Moving, removing, renaming, orphaning, adopting, and reintroduc-
ing packages); how to port packages (Porting and being ported); and how and when to do interim releases of other
maintainers' packages (Non-Maintainer Uploads (NMUs)).
The resources discussed in this reference include the mailing lists (Mailing lists) and servers (Debian machines); a
discussion of the structure of the Debian archive (The Debian archive); explanation of the different servers which
accept package uploads (Uploading to ftp-master); and a discussion of resources which can help maintainers with the
quality of their packages (Overview of Debian Maintainer Tools).
It should be clear that this reference does not discuss the technical details of Debian packages nor how to generate
them. Nor does this reference detail the standards to which Debian software must comply. All of such information can
be found in the Debian Policy Manual.
Furthermore, this document is not an expression of formal policy. It contains documentation for the Debian system
and generally agreed-upon best practices. Thus, it is not what is called a normative document.

3
Debian Developer’s Reference, Release 13.15

4 Chapter 1. Scope of This Document

 CHAPTER

TWO

APPLYING TO BECOME A MEMBER

2.1 Getting started

So, you've read all the documentation, you've gone through the Debian New Maintainers' Guide (or its successor,
Guide for Debian Maintainers), understand what everything in the hello example package is for, and you're about to
Debianize your favorite piece of software. How do you actually become a Debian developer so that your work can be
incorporated into the Project?
Firstly, subscribe to [email protected] if you haven't already. Send the word subscribe in the
Subject of an email to [email protected]. In case of problems, contact the list admin-
istrator at [email protected]. More information on available mailing lists can be found in Mailing
lists. [email protected] is another list, which is mandatory for anyone who wishes to
follow Debian's development.
You should subscribe and lurk (that is, read without posting) for a bit before doing any coding, and you should post
about your intentions to work on something to avoid duplicated effort.
Another good list to subscribe to is [email protected]. See Debian mentors and sponsors for
details. The IRC channel #debian can also be helpful; see IRC channels.
When you know how you want to contribute to Debian, you should get in contact with existing Debian maintainers who
are working on similar tasks. That way, you can learn from experienced developers. For example, if you are interested
in packaging existing software for Debian, you should try to get a sponsor. A sponsor will work together with you on
your package and upload it to the Debian archive once they are happy with the packaging work you have done. You
can find a sponsor by mailing the [email protected] mailing list, describing your package and
yourself and asking for a sponsor (see Sponsoring packages and https://wiki.debian.org/DebianMentorsFaq for more
information on sponsoring). On the other hand, if you are interested in porting Debian to alternative architectures or
kernels you can subscribe to port specific mailing lists and ask there how to get started. Finally, if you are interested in
documentation or Quality Assurance (QA) work you can join maintainers already working on these tasks and submit
patches and improvements.
One pitfall could be a too-generic local part in your email address: Terms like mail, admin, root, master should be
avoided, please see https://www.debian.org/MailingLists/ for details.

5
Debian Developer’s Reference, Release 13.15

2.2 Debian mentors and sponsors

The mailing list [email protected] has been set up for novice maintainers who seek help with
initial packaging and other developer-related issues. Every new developer is invited to subscribe to that list (see Mailing
lists for details).
Those who prefer one-on-one help (e.g., via private email) should also post to that list and an experienced developer
will volunteer to help.
In addition, if you have some packages ready for inclusion in Debian, but are waiting for your new member application
to go through, you might be able find a sponsor to upload your package for you. Sponsors are people who are official
Debian Developers, and who are willing to criticize and upload your packages for you. Please read the debian-mentors
FAQ at https://wiki.debian.org/DebianMentorsFaqfirst.
If you wish to be a mentor and/or sponsor, more information is available in Interacting with prospective Debian devel-
opers.

2.3 Registering as a Debian member

Before you decide to register with Debian, you will need to read all the information available at the New Members
Corner. It describes in detail the preparations you have to do before you can register to become a Debian member. For
example, before you apply, you have to read the Debian Social Contract. Registering as a member means that you agree
with and pledge to uphold the Debian Social Contract; it is very important that member are in accord with the essential
ideas behind Debian. Reading the GNU Manifesto would also be a good idea.
The process of registering as a member is a process of verifying your identity and intentions, and checking your technical
skills. As the number of people working on Debian has grown to over 1000 and our systems are used in several very
important places, we have to be careful about being compromised. Therefore, we need to verify new members before
we can give them accounts on our servers and let them upload packages.
Before you actually register you should have shown that you can do competent work and will be a good contributor.
You show this by submitting patches through the Bug Tracking System and having a package sponsored by an existing
Debian Developer for a while. Also, we expect that contributors are interested in the whole project and not just in
maintaining their own packages. If you can help other maintainers by providing further information on a bug or even
a patch, then do so!
Registration requires that you are familiar with Debian's philosophy and technical documentation. Furthermore, you
need a OpenPGP key which has been signed by an existing Debian maintainer. If your OpenPGP key is not signed yet,
you should try to meet a Debian Developer in person to get your key signed. There's a Key Signing Coordination page
which should help you find a Debian Developer close to you. (If there is no Debian Developer close to you, alternative
ways to pass the ID check may be permitted as an absolute exception on a case-by-case-basis. See the identification
page for more information.)
If you do not have an OpenPGP key yet, generate one. Every developer needs an OpenPGP key in order to sign and
verify package uploads. You should read the manual for the software you are using, since it has much important
information that is critical to its security. Many more security failures are due to human error than to software failure
or high-powered spy techniques. See Maintaining your public key for more information on maintaining your public
key.
Debian uses the GNU Privacy Guard (package gnupg version 2 or better) as its baseline standard. You can use some
other implementation of OpenPGP as well. Note that OpenPGP is an open standard based on RFC 9580.
Your key length must be greater than 2048 bits (4096 bits is preferred); there is no reason to use a smaller key, and
doing so would be much less secure.

6 Chapter 2. Applying to Become a Member

 Debian Developer’s Reference, Release 13.15

If your public key isn't on a public key server such as subkeys.pgp.net, please read the documentation available at
NM Step 2: Identification. That document contains instructions on how to put your key on the public key servers. The
New Maintainer Group will put your public key on the servers if it isn't already there.
Some countries restrict the use of cryptographic software by their citizens. This need not impede one's activities as
a Debian package maintainer however, as it may be perfectly legal to use cryptographic products for authentication,
rather than encryption purposes. If you live in a country where use of cryptography even for authentication is forbidden
then please contact us so we can make special arrangements.
To apply as a new member, you need an existing Debian Developer to support your application (an advocate). After
you have contributed to Debian for a while, and you want to apply to become a registered developer, an existing devel-
oper with whom you have worked over the past months has to express their belief that you can contribute to Debian
successfully.
When you have found an advocate, have your OpenPGP key signed and have already contributed to Debian for a while,
you're ready to apply. You can simply register on our application page. After you have signed up, your advocate has to
confirm your application. When your advocate has completed this step you will be assigned an Application Manager
who will go with you through the necessary steps of the New Member process. You can always check your status on
the applications status board.
For more details, please consult New Members Corner at the Debian web site. Make sure that you are familiar with
the necessary steps of the New Member process before actually applying. If you are well prepared, you can save a lot
of time later on.

2.3. Registering as a Debian member 7

Debian Developer’s Reference, Release 13.15

8 Chapter 2. Applying to Become a Member

 CHAPTER

THREE

DEBIAN DEVELOPER'S DUTIES

3.1 Package Maintainer's Duties

As a package maintainer, you're supposed to provide high-quality packages that are well integrated into the system and
that adhere to the Debian Policy.

3.1.1 Work towards the next stable release

Providing high-quality packages in unstable is not enough; most users will only benefit from your packages when
they are released as part of the next stable release. You are thus expected to collaborate with the release team to
ensure your packages get included.
More concretely, you should monitor whether your packages are migrating to testing (see The testing distribution).
When the migration doesn't happen after the test period, you should analyze why and work towards fixing this. It
might mean fixing your package (in the case of release-critical bugs or failures to build on some architecture) but it can
also mean updating (or fixing, or removing from testing) other packages to help complete a transition in which your
package is entangled due to its dependencies. The release team might provide you some input on the current blockers
of a given transition if you are not able to identify them.

3.1.2 Maintain packages in stable

Most of the package maintainer's work goes into providing updated versions of packages in unstable, but their job
also entails taking care of the packages in the current stable release.
While changes in stable are discouraged, they are possible. Whenever a security problem is reported, you should
collaborate with the security team to provide a fixed version (see Handling security-related bugs). When bugs of
severity important (or more) are reported against the stable version of your packages, you should consider providing
a targeted fix. You can ask the stable release team whether they would accept such an update and then prepare a
stable upload (see Special case: uploads to the stable and oldstable distributions).

9
Debian Developer’s Reference, Release 13.15

3.1.3 Manage release-critical bugs

Generally you should deal with bug reports on your packages as described in Handling bugs. However, there's a special
category of bugs that you need to take care of — the so-called release-critical bugs (RC bugs). All bug reports that have
severity critical, grave or serious make the package unsuitable for inclusion in the next stable release. They
can thus delay the Debian release (when they affect a package in testing) or block migrations to testing (when they
only affect the package in unstable). In the worst scenario, they will lead to the package's removal. That's why these
bugs need to be corrected as quickly as possible.
If, for any reason, you aren't able fix an RC bug in a package of yours within 2 weeks (for example due to time constraints,
or because it's difficult to fix), you should mention it clearly in the bug report and you should tag the bug help to invite
other volunteers to chime in. Be aware that RC bugs are frequently the targets of Non-Maintainer Uploads (see Non-
Maintainer Uploads (NMUs)) because they can block the testing migration of many packages.
Lack of attention to RC bugs is often interpreted by the QA team as a sign that the maintainer has disappeared without
properly orphaning their package. The MIA team might also get involved, which could result in your packages being
orphaned (see Dealing with inactive and/or unreachable maintainers).

3.1.4 Coordination with upstream developers

A big part of your job as Debian maintainer will be to stay in contact with the upstream developers. Debian users
will sometimes report bugs that are not specific to Debian to our bug tracking system. These bug reports should be
forwarded to the upstream developers so that they can be fixed in a future upstream release. Usually it is best if you can
do this, but alternatively, you may ask the bug submitter to do it.
While it's not your job to fix non-Debian specific bugs, you may freely do so if you're able. When you make such
fixes, be sure to pass them on to the upstream maintainers as well. Debian users and developers will sometimes submit
patches to fix upstream bugs — you should evaluate and forward these patches upstream.
In cases where a bug report is forwarded upstream, it may be helpful to remember that the bts-link service can help
with synchronizing states between the upstream bug tracker and the Debian one.
If you need to modify the upstream sources in order to build a policy compliant package, then you should propose a
nice fix to the upstream developers which can be included there, so that you won't have to modify the sources of the
next upstream version. Whatever changes you need, always try not to fork from the upstream sources.
If you find that the upstream developers are or become hostile towards Debian or the free software community, you may
want to re-consider the need to include the software in Debian. Sometimes the social cost to the Debian community is
not worth the benefits the software may bring.

3.2 Administrative Duties

A project of the size of Debian relies on some administrative infrastructure to keep track of everything. As a project
member, you have some duties to ensure everything keeps running smoothly.

10 Chapter 3. Debian Developer's Duties

 Debian Developer’s Reference, Release 13.15

3.2.1 Maintaining your Debian information

There's a LDAP database containing information about Debian developers at https://db.debian.org/. You should enter
your information there and update it as it changes. Most notably, make sure that the address where your debian.org
email gets forwarded to is always up to date, as well as the address where you get your debian-private subscription if
you choose to subscribe there.
For more information about the database, please see The Developers Database.

3.2.2 Maintaining your public key

Be very careful with your private keys. Do not place them on any public servers or multiuser machines, such as the
Debian servers (see Debian machines). Back your keys up; keep a copy offline. Read the documentation that comes
with your software; read the PGP FAQ and OpenPGP Best Practices.
You need to ensure not only that your key is secure against being stolen, but also that it is secure against being lost.
Generate and make a copy (best also in paper form) of your revocation certificate; this is needed if your key is lost.
If you add signatures to your public key, or add user identities, you can update the Debian key ring by sending your
key to the key server at keyring.debian.org. Updates are processed at least once a month by the debian-keyring
package maintainers.
If you need to add a completely new key or remove an old key, you need to get the new key signed by another developer.
If the old key is compromised or invalid, you also have to add the revocation certificate. If there is no real reason
for a new key, the Keyring Maintainers might reject the new key. Details can be found at https://keyring.debian.org/
replacing_keys.html.
The same key extraction routines discussed in Registering as a Debian member apply.
You can find a more in-depth discussion of Debian key maintenance in the documentation of the debian-keyring
package and the https://keyring.debian.org/ site.

3.2.3 Voting

Even though Debian isn't really a democracy, we use a democratic process to elect our leaders and to approve general
resolutions. These procedures are defined by the Debian Constitution.
Other than the yearly leader election, votes are not routinely held, and they are not undertaken lightly. Each proposal is
first discussed on the [email protected] mailing list and it requires several endorsements before the
project secretary starts the voting procedure.
You don't have to track the pre-vote discussions, as the secretary will issue several calls for votes on
[email protected] (and all developers are expected to be subscribed to that list).
Democracy doesn't work well if people don't take part in the vote, which is why we encourage all developers to vote.
Voting is conducted via OpenPGP-signed/encrypted email messages.
The list of all proposals (past and current) is available on the Debian Voting Information page, along with information
on how to make, second and vote on proposals.

3.2. Administrative Duties 11

Debian Developer’s Reference, Release 13.15

3.2.4 Going on vacation gracefully

It is common for developers to have periods of absence, whether those are planned vacations or simply being buried
in other work. The important thing to notice is that other developers need to know that you're on vacation so that they
can do whatever is needed if a problem occurs with your packages or other duties in the project.
Usually this means that other developers are allowed to NMU (see Non-Maintainer Uploads (NMUs)) your package if
a big problem (release critical bug, security update, etc.) occurs while you're on vacation. Sometimes it's nothing as
critical as that, but it's still appropriate to let others know that you're unavailable.
In order to inform the other developers, there are two things that you should do. First send a mail to
[email protected] with [VAC] prepended to the subject of your message1 and state the period of
time when you will be on vacation. You can also give some special instructions on what to do if a problem occurs.
The other thing to do is to mark yourself as on vacation in the The Developers Database (this information is only
accessible to Debian developers). Don't forget to remove the on vacation flag when you come back!
Ideally, you should sign up at the OpenPGP coordination pages when booking a holiday and check if anyone there is
looking for signing. This is especially important when people go to exotic places where we don't have any developers
yet but where there are people who are interested in applying.

3.2.5 Retiring

If you choose to leave the Debian project, you should make sure you do the following steps:
• Orphan all your packages, as described in Orphaning a package.
• Remove yourself from uploaders for co- or team-maintained packages.
• If you received mails via a @debian.org e-mail alias (e.g. [email protected]) and would like to get removed,
open a RT ticket for the Debian System Administrators. Just send an e-mail to [email protected] with
"Debian RT" somewhere in the subject stating from which aliases you'd like to get removed.
• Please remember to also retire from teams, e.g. remove yourself from team wiki pages or salsa groups.
• Use the link https://nm.debian.org/process/emeritus to log in to nm.debian.org, request emeritus status and write
a goodbye message that will be automatically posted on debian-private.
Authentication to the NM site requires an SSO browser certificate. You can generate them on https://sso.debian.
org.
In the case you run into problems opening the retirement process yourself, contact NM front desk using
[email protected]
It is important that the above process is followed, because finding inactive developers and orphaning their packages
takes significant time and effort.

3.2.6 Returning after retirement

A retired developer's account is marked as "emeritus" when the process in Retiring is followed, and "removed" other-
wise. Retired developers with an "emeritus" account can get their account re-activated as follows:
• Get access to an salsa account (either by remembering the credentials for your old guest account or by requesting
a new one as described at SSO Debian wiki page.
• Mail [email protected] for further instructions.
1 This is so that the message can be easily filtered by people who don't want to read vacation notices.

12 Chapter 3. Debian Developer's Duties

 Debian Developer’s Reference, Release 13.15

• Go through a shortened NM process (to ensure that the returning developer still knows important parts of P&P
and T&S).
Retired developers with a "removed" account need to go through full NM again.

3.2. Administrative Duties 13

Debian Developer’s Reference, Release 13.15

14 Chapter 3. Debian Developer's Duties

 CHAPTER

FOUR

RESOURCES FOR DEBIAN MEMBERS

In this chapter you will find a very brief roadmap of the Debian mailing lists, the Debian machines which may be
available to you as a member, and all the other resources that are available to help you in your work.

4.1 Mailing lists

Much of the conversation between Debian developers (and users) is managed through a wide array of mailing lists
we host at lists.debian.org. To find out more on how to subscribe or unsubscribe, how to post and how not
to post, where to find old posts and how to search them, how to contact the list maintainers and see various other
information about the mailing lists, please read https://www.debian.org/MailingLists/. This section will only cover
aspects of mailing lists that are of particular interest to developers.

4.1.1 Basic rules for use

When replying to messages on the mailing list, please do not send a carbon copy (CC) to the original poster unless they
explicitly request to be copied. Anyone who posts to a mailing list should read it to see the responses.
Cross-posting (sending the same message to multiple lists) is discouraged. As ever on the net, please trim down the
quoting of articles you're replying to. In general, please adhere to the usual conventions for posting messages.
Please read the code of conduct for more information. The Debian Community Guidelines are also worth reading.

4.1.2 Core development mailing lists

The core Debian mailing lists that developers should use are:
• [email protected], used to announce important things to developers. All devel-
opers are expected to be subscribed to this list.
• [email protected], used to discuss various development related technical issues.
• [email protected], where the Debian Policy is discussed and voted on.
• [email protected], used to discuss various non-technical issues related to the project.
There are other mailing lists available for a variety of special topics; see https://lists.debian.org/ for a list.

15
Debian Developer’s Reference, Release 13.15

4.1.3 Special lists

[email protected] is a special mailing list for private discussions amongst Debian developers. It
is meant to be used for posts which for whatever reason should not be published publicly. As such, it is a low volume list,
and users are urged not to use [email protected] unless it is really necessary. Moreover, do not
forward email from that list to anyone. Archives of this list are not available on the web for obvious reasons, but you can
see them using your shell account on master.debian.org and looking in the ~debian/archive/debian-private/
directory.
[email protected] is a special mailing list used as a grab-bag for Debian related correspondence
such as contacting upstream authors about licenses, bugs, etc. or discussing the project with others where it might be
useful to have the discussion archived somewhere.

4.1.4 Requesting new development-related lists

Before requesting a mailing list that relates to the development of a package (or a small group of related packages),
please consider if using an alias (via a .forward-aliasname file on master.debian.org, which translates into a reasonably
nice [email protected] address) is more appropriate.
If you decide that a regular mailing list on lists.debian.org is really what you want, go ahead and fill in a request,
following the HOWTO.

4.2 IRC channels

Several IRC channels are dedicated to Debian's development. They are mainly hosted on the Open and free technology
community (OFTC) network. The irc.debian.org DNS entry is an alias to irc.oftc.net.
The main channel for Debian in general is #debian. This is a large, general-purpose channel where users can find
recent news in the topic and served by bots. #debian is for English speakers; there are also #debian.de, #debian-fr,
#debian-br and other similarly named channels for speakers of other languages.
The main channel for Debian development is #debian-devel. It is a very active channel; it will typically have a
minimum of 150 people at any time of day. It's a channel for people who work on Debian, it's not a support channel
(there's #debian for that). It is however open to anyone who wants to lurk (and learn). Its topic is commonly full of
interesting information for developers.
Since #debian-devel is an open channel, you should not speak there of issues that are discussed in
[email protected]. There's another channel for this purpose, it's called #debian-private and
it's protected by a key. This key is available at master.debian.org:~debian/misc/irc-password.
There are other additional channels dedicated to specific subjects. #debian-bugs is used for coordinating bug squash-
ing parties. #debian-boot is used to coordinate the work on the debian-installer. #debian-doc is occasionally used
to talk about documentation, like the document you are reading. Other channels are dedicated to an architecture or a
set of packages: #debian-kde, #debian-dpkg, #debian-perl, #debian-python...
Some non-English developers' channels exist as well, for example #debian-devel-fr for French speaking people
interested in Debian's development.
Channels dedicated to Debian also exist on other IRC networks.

16 Chapter 4. Resources for Debian Members

 Debian Developer’s Reference, Release 13.15

4.3 Documentation

This document contains a lot of information which is useful to Debian developers, but it cannot contain everything.
Most of the other interesting documents are linked from The Developers' Corner. Take the time to browse all the links;
you will learn many more things.

4.4 Debian machines

Debian has several computers working as servers, most of which serve critical functions in the Debian project. Most
of the machines are used for porting activities, and they all have a permanent connection to the Internet.
Some of the machines are available for individual developers to use, as long as the developers follow the rules set forth
in the Debian Machine Usage Policies.
Generally speaking, you can use these machines for Debian-related purposes as you see fit. Please be kind to system
administrators, and do not use up tons and tons of disk space, network bandwidth, or CPU without first getting the
approval of the system administrators. Usually these machines are run by volunteers.
Please take care to protect your Debian passwords and SSH keys installed on Debian machines. Avoid login or upload
methods which send passwords over the Internet in the clear, such as Telnet, FTP, POP etc.
Please do not put any material that doesn't relate to Debian on the Debian servers, unless you have prior permission.
The current list of Debian machines is available at https://db.debian.org/machines.cgi. That web page contains machine
names, contact information, information about who can log in, SSH keys etc.
If you have a problem with the operation of a Debian server, and you think that the system operators need to be notified
of this problem, you can check the list of open issues in the DSA (Debian System Administration) Team's queue of our
request tracker at https://rt.debian.org/ (you can login with user "debian", its password is available at master.debian.
org:~debian/misc/rt-password). To report a new problem in the request tracker, simply send a mail to admin@rt.
debian.org and make sure to put the string "Debian RT" somewhere in the subject. To contact the DSA team by email,
use [email protected] for anything that contains private or privileged information and should not be made public, and
[email protected] otherwise. The DSA team is also present on the #debian-admin IRC channel
on OFTC.
If you have a problem with a certain service, not related to the system administration (such as packages to be removed
from the archive, suggestions for the web site, etc.), generally you'll report a bug against a pseudo-package. See Bug
reporting for information on how to submit bugs.
Some of the core servers are restricted, but the information from there is mirrored to another server.

4.4.1 The bugs server

bugs.debian.org is the canonical location for the Bug Tracking System (BTS).
If you plan on doing some statistical analysis or processing of Debian bugs, this would be the place to do it. Please
describe your plans on [email protected] before implementing anything, however, to reduce un-
necessary duplication of effort or wasted processing time.

4.3. Documentation 17
Debian Developer’s Reference, Release 13.15

4.4.2 The ftp-master server

The ftp-master.debian.org server holds the canonical copy of the Debian archive. Generally, packages uploaded
to ftp.upload.debian.org end up on this server; see Uploading a package.
It is restricted; a mirror is available on mirror.ftp-master.debian.org.
Problems with the Debian FTP archive generally need to be reported as bugs against the ftp.debian.org pseudo-
package or an email to [email protected], but also see the procedures in Moving, removing, renaming, orphan-
ing, adopting, and reintroducing packages.

4.4.3 The www-master server

The main web server is www-master.debian.org. It holds the official web pages, the face of Debian for most newbies.
If you find a problem with the Debian web server, you should generally submit a bug against the pseudo-package www.
debian.org. Remember to check whether or not someone else has already reported the problem to the Bug Tracking
System.

4.4.4 The people web server

people.debian.org is the server used for developers' own web pages about anything related to Debian.
If you have some Debian-specific information which you want to serve on the web, you can do this by putting material
in the public_html directory under your home directory on people.debian.org. This will be accessible at the
URL https://people.debian.org/~your-user-id/.
You should only use this particular location because it will be backed up, whereas on other hosts it won't.
Usually the only reason to use a different host is when you need to publish materials subject to the U.S. export restric-
tions, in which case you can use one of the other servers located outside the United States.
Send mail to [email protected] if you have any questions.

4.4.5 salsa.debian.org: Git repositories and collaborative development platform

If you want to use a git repository for any of your Debian work, you can use Debian's GitLab instance called Salsa for
that purpose. Gitlab provides also the possibility to have merge requests, wiki pages, bug trackers among many other
services as well as a fine-grained tuning of access permission, to help working on projects collaboratively.
For more information, please see the documentation at https://wiki.debian.org/Salsa/Doc.
Any Debian package hosted on Salsa has also access to the Salsa CI . The Salsa CI pipeline mimics the tests that are
run after each upload to Debian, but instead of having to wait for results or risk the health of the Debian repositories,
Salsa CI provides you with instant feedback about any problems the changes you made may have created or solved.

18 Chapter 4. Resources for Debian Members

 Debian Developer’s Reference, Release 13.15

4.4.6 GitHub.com: Submitting pull requests to upstream repositories

If some upstream repository is hosted on GitHub.com, you can use the Debian organization to create repository forks
and submit changed branches with pull requests to upstream maintainers.
The organization is open to all Debian Members. To request membership, open an issue in the Debian/.github meta
repository.

4.4.7 chroots to different distributions

On some machines, there are chroots to different distributions available. You can use them like this:

vore$ dchroot unstable

Executing shell in chroot: /org/vore.debian.org/chroots/user/unstable

In all chroots, the normal user home directories are available. You can find out which chroots are available via https:
//db.debian.org/machines.cgi.

4.5 The Developers Database

The Developers Database, at https://db.debian.org/, is an LDAP directory for managing Debian developer attributes.
You can use this resource to search the list of Debian developers. Part of this information is also available through the
finger service on Debian servers; try finger [email protected] to see what it reports.
Developers can log into the database to change various information about themselves, such as:
• forwarding address for your debian.org email as well as spam handling. See https://db.debian.org/forward.html
for a description of all the options.
• subscription to debian-private
• whether you are on vacation
• personal information such as your address, country, the latitude and longitude of the place where you live for use
in the world map of Debian developers, phone and fax numbers, IRC nickname and web page
• password and preferred shell on Debian Project machines
Most of the information is not accessible to the public, naturally. For more information please read the online docu-
mentation that you can find at https://db.debian.org/doc-general.html.
Developers can also submit their SSH keys to be used for authorization on the official Debian machines, and even add
new *.debian.net DNS entries. Those features are documented at https://db.debian.org/doc-mail.html.

4.6 The Debian archive

The Debian distribution consists of a lot of packages (currently around 30000 source packages) and a few additional
files (such as documentation and installation disk images).
Here is an example directory tree of a complete Debian archive:

dists/stable/main/
dists/stable/main/binary-amd64/
dists/stable/main/binary-armel/
(continues on next page)

4.5. The Developers Database 19

Debian Developer’s Reference, Release 13.15

(continued from previous page)

dists/stable/main/binary-i386/
...
dists/stable/main/source/
...
dists/stable/main/disks-amd64/
dists/stable/main/disks-armel/
dists/stable/main/disks-i386/
...

dists/stable/contrib/
dists/stable/contrib/binary-amd64/
dists/stable/contrib/binary-armel/
dists/stable/contrib/binary-i386/
...
dists/stable/contrib/source/

dists/stable/non-free/
dists/stable/non-free/binary-amd64/
dists/stable/non-free/binary-armel/
dists/stable/non-free/binary-i386/
...
dists/stable/non-free/source/

dists/stable/non-free-firmware/
dists/stable/non-free-firmware/binary-amd64/
dists/stable/non-free-firmware/binary-armel/
dists/stable/non-free-firmware/binary-i386/
...
dists/stable/non-free-firmware/source/

dists/testing/
dists/testing/main/
...
dists/testing/contrib/
...
dists/testing/non-free/
...
dists/testing/non-free-firmware/
...

dists/unstable
dists/unstable/main/
...
dists/unstable/contrib/
...
dists/unstable/non-free/
...
dists/unstable/non-free-firmware/
...

pool/
pool/main/a/
(continues on next page)

20 Chapter 4. Resources for Debian Members

 Debian Developer’s Reference, Release 13.15

(continued from previous page)

pool/main/a/apt/
...
pool/main/b/
pool/main/b/bash/
...
pool/main/liba/
pool/main/liba/libalias-perl/
...
pool/main/m/
pool/main/m/mailx/
...
pool/non-free/d/
pool/non-free/d/doc-rfc/
...
pool/non-free-firmware/f/
pool/non-free-firmware/f/firmware-nonfree/
...

As you can see, the top-level directory contains two directories, dists/ and pool/. The latter is a “pool” in which
the packages actually are, and which is handled by the archive maintenance database and the accompanying programs.
The former contains the distributions, stable, testing and unstable. The Packages and Sources files in the
distribution subdirectories can reference files in the pool/ directory. The directory tree below each of the distributions
is arranged in an identical manner. What we describe below for stable is equally applicable to the unstable and
testing distributions.
dists/stable contains four directories, namely main, contrib, non-free and non-free-firmware.
In each of the areas, there is a directory for the source packages (source) and a directory for each supported architecture
(binary-i386, binary-amd64, etc.).
The main area contains additional directories which hold the disk images and some essential pieces of documentation
required for installing the Debian distribution on a specific architecture (disks-i386, disks-amd64, etc.).

4.6.1 Sections

The main section of the Debian archive is what makes up the official Debian distribution. The main section is official
because it fully complies with all our guidelines. The other two sections do not, to different degrees; as such, they are
not officially part of Debian.
Every package in the main section must fully comply with the Debian Free Software Guidelines (DFSG) and with all
other policy requirements as described in the Debian Policy Manual. The DFSG is our definition of “free software.”
Check out the Debian Policy Manual for details.
Packages in the contrib section have to comply with the DFSG, but may fail other requirements. For instance, they
may depend on non-free packages.
Packages which do not conform to the DFSG are placed in the non-free or non-free-firmware sections. These
packages are not considered as part of the Debian distribution, though we enable their use, and we provide infrastructure
(such as our bug-tracking system and mailing lists) for these non-free software packages.
The Debian Policy Manual contains a more exact definition of the four sections. The above discussion is just an
introduction.
The separation of the four sections at the top-level of the archive is important for all people who want to distribute
Debian, either via FTP servers on the Internet or on CD-ROMs: by distributing only the main and contrib sections,

4.6. The Debian archive 21

Debian Developer’s Reference, Release 13.15

one can avoid any legal risks. Some packages in the non-free section do not allow commercial distribution, for
example.
On the other hand, a CD-ROM vendor could easily check the individual package licenses of the packages in non-free
and include as many on the CD-ROMs as it's allowed to. (Since this varies greatly from vendor to vendor, this job can't
be done by the Debian developers.)
Note that the term section is also used to refer to categories which simplify the organization and browsing of available
packages: admin, net, utils, etc. Once upon a time, these sections (subsections, rather) existed in the form of
subdirectories within the Debian archive. Nowadays, these exist only in the Section header fields of packages.

4.6.2 Architectures

In the first days, the Linux kernel was only available for Intel i386 (or greater) platforms, and so was Debian. But
as Linux became more and more popular, the kernel was ported to other architectures and Debian started to support
them. And as if supporting so much hardware was not enough, Debian decided to build some ports based on other
Unix kernels, like hurd and kfreebsd.
Debian GNU/Linux 1.3 was only available as i386. Debian 2.0 shipped for i386 and m68k architectures. Debian
2.1 shipped for the i386, m68k, alpha, and sparc architectures. Since then Debian has grown hugely. Debian 9
supports a total of ten Linux architectures (amd64, arm64, armel, armhf, i386, mips, mips64el, mipsel, ppc64el,
and s390x) and two kFreeBSD architectures (kfreebsd-i386 and kfreebsd-amd64).
Information for developers and users about the specific ports are available at the Debian Ports web pages.

4.6.3 Packages

There are two types of Debian packages, namely source and binary packages.
Depending on the format of the source package, it will consist of one or more files in addition to the mandatory .dsc
file:
• with format “1.0”, it has either a .tar.gz file or both an .orig.tar.gz and a .diff.gz file;
• with format “3.0 (quilt)”, it has a mandatory .orig.tar.{gz,bz2,xz} upstream tarball, multiple optional
.orig-component.tar.{gz,bz2,xz} additional upstream tarballs and a mandatory debian.tar.{gz,bz2,
xz} debian tarball;
• with format “3.0 (native)”, it has only a single .tar.{gz,bz2,xz} tarball.
If a package is developed specially for Debian and is not distributed outside of Debian, there is just one .tar.{gz,bz2,
xz} file, which contains the sources of the program; it's called a “native” source package. If a package is distributed
elsewhere too, the .orig.tar.{gz,bz2,xz} file stores the so-called upstream source code, that is the source
code that's distributed by the upstream maintainer (often the author of the software). In this case, the .diff.gz
or the debian.tar.{gz,bz2,xz} contains the changes made by the Debian maintainer.
The .dsc file lists all the files in the source package together with checksums (md5sums, sha1sums, sha256sums) and
some additional info about the package (maintainer, version, etc.).

22 Chapter 4. Resources for Debian Members

 Debian Developer’s Reference, Release 13.15

4.6.4 Distributions

The directory system described in the previous chapter is itself contained within distribution directories. Each
distribution is actually contained in the pool directory in the top level of the Debian archive itself.
To summarize, the Debian archive has a root directory within a mirror site. For instance, at the mirror site ftp.us.
debian.org the Debian archive itself is contained in /debian, which is a common location (another is /pub/debian).
A distribution comprises Debian source and binary packages, and the respective Sources and Packages index files,
containing the header information from all those packages. The former are kept in the pool/ directory, while the latter
are kept in the dists/ directory of the archive (for backwards compatibility).

4.6.4.1 Stable, testing, and unstable

There are always distributions called stable (residing in dists/stable), testing (residing in dists/testing),
and unstable (residing in dists/unstable). This reflects the development process of the Debian project.
Active development is done in the unstable distribution (that's why this distribution is sometimes called the
development distribution). Every Debian developer can update their packages in this distribution at any time.
Thus, the contents of this distribution change from day to day. Since no special effort is made to make sure everything
in this distribution is working properly, it is sometimes literally unstable.
The testing distribution is generated automatically by taking packages from unstable if they satisfy certain criteria.
Those criteria should ensure a good quality for packages within testing. The update to testing is launched twice
each day, right after the new packages have been installed. See The testing distribution.
After a period of development, once the release manager deems fit, the testing distribution is frozen, meaning that the
policies which control how packages move from unstable to testing are tightened. Packages which are too buggy
are removed. No changes are allowed into testing except for bug fixes. After some time has elapsed, depending
on progress, the testing distribution is frozen even further. Details of the handling of the testing distribution are
published by the Release Team on debian-devel-announce. After the open issues are solved to the satisfaction of the
Release Team, the distribution is released. Releasing means that testing is renamed to stable, and a new copy is
created for the new testing, and the previous stable is renamed to oldstable and stays there until it is finally
archived. On archiving, the contents are moved to archive.debian.org.
This development cycle is based on the assumption that the unstable distribution becomes stable after passing a
period of being in testing. Even once a distribution is considered stable, a few bugs inevitably remain — that's why
the stable distribution is updated every now and then. However, these updates are tested very carefully and have to be
introduced into the archive individually to reduce the risk of introducing new bugs. You can find proposed additions to
stable in the proposed-updates directory. Those packages in proposed-updates that pass muster are periodically
moved as a batch into the stable distribution and the revision level of the stable distribution is incremented (e.g., ‘6.0’
becomes ‘6.0.1’, ‘5.0.7’ becomes ‘5.0.8’, and so forth). Please refer to Special case: uploads to the stable and oldstable
distributions for details.
Note that development in unstable during the freeze should not be continued as usual, as packages are still build in
unstable, before they migrate to testing, thus unstable should only contain packages meant for testing. Thus
only upload to unstable during freezes, if you are planning to request an unblock (or if the package is not in testing).
If you want to develop new stuff for after the freeze, upload to experimental instead.

4.6. The Debian archive 23

Debian Developer’s Reference, Release 13.15

4.6.4.2 More information about the testing distribution

Packages are usually installed into the testing distribution after they have undergone some degree of testing in
unstable.
For more details, please see the The testing distribution.

4.6.4.3 Experimental

The experimental distribution is a special distribution. It is not a full distribution in the same sense as stable,
testing and unstable are. Instead, it is meant to be a temporary staging area for highly experimental software
where there's a good chance that the software could break your system, or software that's just too unstable even for the
unstable distribution (but there is a reason to package it nevertheless). Users who download and install packages from
experimental are expected to have been duly warned. In short, all bets are off for the experimental distribution.
These are the sources.list 5 lines for experimental:

deb http://deb.debian.org/debian/ experimental main

deb-src http://deb.debian.org/debian/ experimental main

If there is a chance that the software could do grave damage to a system, it is likely to be better to put it into
experimental. For instance, an experimental compressed file system should probably go into experimental.
Whenever there is a new upstream version of a package that introduces new features but breaks a lot of old ones, it
should either not be uploaded, or be uploaded to experimental. A new, beta, version of some software which uses a
completely different configuration can go into experimental, at the maintainer's discretion. If you are working on an
incompatible or complex upgrade situation, you can also use experimental as a staging area, so that testers can get
early access.
Some experimental software can still go into unstable, with a few warnings in the description, but that isn't recom-
mended because packages from unstable are expected to propagate to testing and thus to stable. You should
not be afraid to use experimental since it does not cause any pain to the ftpmasters, the experimental packages are
periodically removed once you upload the package in unstable with a higher version number.
New software which isn't likely to damage your system can go directly into unstable.
An alternative to experimental is to use your personal web space on people.debian.org.

4.6.5 Release code names

Every released Debian distribution has a code name: Debian 10 is called buster; Debian 11, bullseye; Debian
12, bookworm; the next release, Debian 13, will be called trixie and Debian 14 will be called forky. There is
also a pseudo-distribution, called sid, which is the current unstable distribution; since packages are moved from
unstable to testing as they approach stability, sid itself is never released. As well as the usual contents of a Debian
distribution, sid contains packages for architectures which are not yet officially supported or released by Debian. These
architectures are planned to be integrated into the mainstream distribution at some future date. The codenames and
versions for older releases are listed on the website.
Since Debian has an open development model (i.e., everyone can participate and follow the development) even the
unstable and testing distributions are distributed to the Internet through the Debian FTP and HTTP server net-
work. Thus, if we had called the directory which contains the release candidate version testing, then we would
have to rename it to stable when the version is released, which would cause all FTP mirrors to re-retrieve the whole
distribution (which is quite large).
On the other hand, if we called the distribution directories Debian-x.y from the beginning, people would think that
Debian release x.y is available. (This happened in the past, where a CD-ROM vendor built a Debian 1.0 CD-ROM
based on a pre-1.0 development version. That's the reason why the first official Debian release was 1.1, and not 1.0.)

24 Chapter 4. Resources for Debian Members

 Debian Developer’s Reference, Release 13.15

Thus, the names of the distribution directories in the archive are determined by their code names and not their release
status (e.g., bookworm). These names stay the same during the development period and after the release; symbolic
links, which can be changed easily, indicate the currently released stable distribution. That's why the real distribution
directories use the code names, while symbolic links for stable, testing, and unstable point to the appropriate
release directories.

4.7 Debian mirrors

The various download archives and the web site have several mirrors available in order to relieve our canonical servers
from heavy load. In fact, some of the canonical servers aren't public — a first tier of mirrors balances the load instead.
That way, users always access the mirrors and get used to using them, which allows Debian to better spread its bandwidth
requirements over several servers and networks, and basically makes users avoid hammering on one primary location.
Note that the first tier of mirrors is as up-to-date as it can be since they update when triggered from the internal sites
(we call this push mirroring).
All the information on Debian mirrors, including a list of the available public FTP/HTTP servers, can be found at
https://www.debian.org/mirror/. This useful page also includes information and tools which can be helpful if you are
interested in setting up your own mirror, either for internal or public access.
Note that mirrors are generally run by third parties who are interested in helping Debian. As such, developers generally
do not have accounts on these machines.

4.8 The Incoming system

The Incoming system is responsible for collecting updated packages and installing them in the Debian archive. It
consists of a set of directories and scripts that are installed on ftp-master.debian.org.
Packages are uploaded by all the maintainers into a directory called UploadQueue. This directory is scanned every few
minutes by a daemon called queued, *.command-files are executed, and remaining and correctly signed *.changes-
files are moved together with their corresponding files to the unchecked directory. This directory is not visible for
most Developers, as ftp-master is restricted; it is scanned every 15 minutes by the dak process-upload script, which
verifies the integrity of the uploaded packages and their cryptographic signatures. If the package is considered ready
to be installed, it is moved into the done directory. If this is the first upload of the package (or it has new binary
packages), it is moved to the new directory, where it waits for approval by the ftpmasters. If the package contains files
to be installed by hand it is moved to the byhand directory, where it waits for manual installation by the ftpmasters.
Otherwise, if any error has been detected, the package is refused and is moved to the reject directory.
Once the package is accepted, the system sends a confirmation mail to the maintainer and closes all the bugs marked
as fixed by the upload, and the auto-builders may start recompiling it. The package is now publicly accessible at
https://incoming.debian.org/ until it is really installed in the Debian archive. This happens four times a day (and is also
called the dinstall run for historical reasons); the package is then removed from incoming and installed in the pool
along with all the other packages. Once all the other updates (generating new Packages and Sources index files for
example) have been made, a special script is called to ask all the primary mirrors to update themselves.
The archive maintenance software will also send the OpenPGP signed .changes file that you uploaded to
the appropriate mailing lists. If a package is released with the Distribution set to stable, the announce-
ment is sent to [email protected]. If a package is released with Distribution set to
unstable or experimental, the announcement will be posted to [email protected]
or [email protected] instead.
Though ftp-master is restricted, a copy of the installation is available to all developers on mirror.ftp-master.
debian.org.

4.7. Debian mirrors 25

Debian Developer’s Reference, Release 13.15

4.9 Package information

4.9.1 On the web

Each package has several dedicated web pages. https://packages.debian.org/package-name displays each ver-
sion of the package available in the various distributions. Each version links to a page which provides information,
including the package description, the dependencies, and package download links.
The bug tracking system tracks bugs for each package. You can view the bugs of a given package at the URL https:/
/bugs.debian.org/package-name.

4.9.2 The dak ls utility

dak ls is part of the dak suite of tools, listing available package versions for all known distributions and architectures.
The dak tool is available on ftp-master.debian.org, and on the mirror on mirror.ftp-master.debian.org. It
uses a single argument corresponding to a package name. An example will explain it better:

$ dak ls evince
evince | 3.22.1-3+deb11u2 | oldstable | source, amd64, arm64, armel, armhf,
˓→ i386, mips, mips64el, mipsel, ppc64el, s390x
evince | 3.22.1-3+deb11u2 | oldstable-debug | source
evince | 3.30.2-3+deb12u1 | stable | source, amd64, arm64, armel, armhf,
˓→ i386, mips, mips64el, mipsel, ppc64el, s390x
evince | 3.30.2-3+deb12u1 | stable-debug | source
evince | 3.38.2-1 | testing | source, amd64, arm64, armel, armhf,
˓→ i386, mips64el, mipsel, ppc64el, s390x
evince | 3.38.2-1 | unstable | source, amd64, arm64, armel, armhf,
˓→ i386, mips64el, mipsel, ppc64el, s390x
evince | 3.38.2-1 | unstable-debug | source
evince | 40.4-1 | buildd-experimental | source, amd64, arm64, armel, armhf,
˓→ i386, mips64el, mipsel, ppc64el, s390x
evince | 40.4-1 | experimental | source, amd64, arm64, armel, armhf,
˓→ i386, mips64el, mipsel, ppc64el, s390x
evince | 40.4-1 | experimental-debug | source

In this example, you can see that the version in unstable differs from the version in testing and that there has
been a binary-only NMU of the package for all architectures. Each version of the package has been recompiled on all
architectures.

4.10 The Debian Package Tracker

The Debian Package Tracker is an email and web-based tool to track the activity of a source package. You can get the
same emails that the package maintainer gets, simply by subscribing to the package in the Debian Package Tracker.
The package tracker has a web interface at https://tracker.debian.org/ that puts together a lot of information about each
source package. It features many useful links (BTS, QA stats, contact information, DDTP translation status, buildd
logs) and gathers much more information from various places (30 latest changelog entries, testing status, etc.). It's a
very useful tool if you want to know what's going on with a specific source package. Furthermore, once authenticated,
you can subscribe and unsubscribe from any package with a single click.
You can jump directly to the web page concerning a specific source package with a URL like https://tracker.
debian.org/pkg/sourcepackage.

26 Chapter 4. Resources for Debian Members

 Debian Developer’s Reference, Release 13.15

For more in-depth information, you should have a look at its documentation. Among other things, it explains you how
to interact with it by email, how to filter the mails that it forwards, how to configure your VCS commit notifications,
how to leverage its features for maintainer teams, etc.

4.11 Developer's packages overview

A QA (quality assurance) web portal is available at https://qa.debian.org/developer.php which displays a table listing all
the packages of a single developer (including those where the party is listed as a co-maintainer). The table gives a good
summary about the developer's packages: number of bugs by severity, list of available versions in each distribution,
testing status and much more including links to any other useful information.
It is a good idea to look up your own data regularly so that you don't forget any open bugs, and so that you don't forget
which packages are your responsibility.

4.12 Debian's FusionForge installation: Alioth

Until Alioth was deprecated and eventually turned off in June 2018, it was a Debian service based on a slightly modified
version of the FusionForge software (which evolved from SourceForge and GForge). This software offered developers
access to easy-to-use tools such as bug trackers, patch managers, project/task managers, file hosting services, mailing
lists, VCS repositories, etc.
For many previously offered services replacements exist. This is important to know, as there are still many references
to alioth which still need fixing. If you encounter such references please take the time to try fixing them, for example
by filing bugs or when possible fixing the reference.

4.13 Goodies for Debian Members

Benefits available to Debian Members are documented on https://wiki.debian.org/MemberBenefits.

4.11. Developer's packages overview 27

Debian Developer’s Reference, Release 13.15

28 Chapter 4. Resources for Debian Members

 CHAPTER

FIVE

MANAGING PACKAGES

This chapter contains information related to creating, uploading, maintaining, and porting packages.

5.1 New packages

If you want to create a new package for the Debian distribution, you should first check the Work-Needing and Prospective
Packages (WNPP) list. Checking the WNPP list ensures that no one is already working on packaging that software,
and that effort is not duplicated. Read the WNPP web pages for more information.
Assuming no one else is already working on your prospective package, you must then submit a bug report (Bug re-
porting) against the pseudo-package wnpp describing your plan to create a new package, including, but not limiting
yourself to, the description of the package (so that others can review it), the license of the prospective package, and the
current URL where it can be downloaded from.
You should set the subject of the bug to ITP: foo -- short description, substituting the name of the new package for
foo. The severity of the bug report must be set to wishlist. Please send a copy to [email protected].
org by using the X-Debbugs-CC header (don't use CC:, because that way the message's subject won't indicate the bug
number). If you are packaging so many new packages (>10) that notifying the mailing list in separate messages is too
disruptive, send a summary after filing the bugs to the debian-devel list instead. This will inform the other developers
about upcoming packages and will allow a review of your description and package name.
Please include a Closes: #nnnnn entry in the changelog of the new package in order for the bug report to be auto-
matically closed once the new package is installed in the archive (see When bugs are closed by new uploads).
If you think your package needs some explanations for the administrators of the NEW package queue, include them in
your changelog, send to [email protected] a reply to the email you receive as a maintainer after your upload,
or reply to the rejection email in case you are already re-uploading.
When closing security bugs include CVE numbers as well as the Closes: #nnnnn. This is useful for the security
team to track vulnerabilities. If an upload is made to fix the bug before the advisory ID is known, it is encouraged to
modify the historical changelog entry with the next upload. Even in this case, please include all available pointers to
background information in the original changelog entry.
There are a number of reasons why we ask maintainers to announce their intentions:
• It helps the (potentially new) maintainer to tap into the experience of people on the list, and lets them know if
anyone else is working on it already.
• It lets other people thinking about working on the package know that there already is a volunteer, so efforts may
be shared.
• It lets the rest of the maintainers know more about the package than the one line description and the usual
changelog entry Initial release that gets posted to [email protected].

29
Debian Developer’s Reference, Release 13.15

• It is helpful to the people who live off unstable (and form our first line of testers). We should encourage these
people.
• The announcements give maintainers and other interested parties a better feel of what is going on, and what is
new, in the project.
Please see https://ftp-master.debian.org/REJECT-FAQ.html for common rejection reasons for a new package.

5.2 Recording changes in the package

Changes that you make to the package need to be recorded in the debian/changelog file, for human users to read
and comprehend. These changes should provide a concise description of what was changed, why (if it's in doubt), and
note if any bugs were closed. They also record when the packaging was completed. This file will be installed in /usr/
share/doc/package/changelog.Debian.gz, or /usr/share/doc/package/changelog.gz for native packages.
The debian/changelog file conforms to a certain structure, with a number of different fields. One field of note, the
distribution, is described in Picking a distribution. More information about the structure of this file can be found
in the Debian Policy section titled debian/changelog.
Changelog entries can be used to automatically close Debian bugs when the package is installed into the archive. See
When bugs are closed by new uploads.
It is conventional that the changelog entry of a package that contains a new upstream version of the software looks like
this:

* New upstream release.

There are tools to help you create entries and finalize the changelog for release — see devscripts and dpkg-dev-el.
See also Best practices for debian/changelog.

5.3 Testing the package

Before you upload your package, you should do basic testing on it. At a minimum, you should try the following activities
(you'll need to have an older version of the same Debian package around):
• Run lintian over the package. You can run lintian as follows: lintian -v package-version.changes. This
will check the source package as well as the binary package. If you don't understand the output that lintian
generates, try adding the -i switch, which will cause lintian to output a very verbose description of the prob-
lem.
Normally, a package should not be uploaded if it causes lintian to emit errors (they will start with E).
For more information on lintian, see lintian.
• Optionally run debdiff (see debdiff ) to analyze changes from an older version, if one exists.
• Install the package and make sure the software works in an up-to-date unstable system.
• Upgrade the package from an older version to your new version.
• Remove the package, then reinstall it.
• Installing, upgrading and removal of packages can either be tested manually or by using the piuparts tool.
• Copy the source package in a different directory and try unpacking it and rebuilding it. This tests if the package
relies on existing files outside of it, or if it relies on permissions being preserved on the files shipped inside the
.diff.gz file.

30 Chapter 5. Managing Packages

 Debian Developer’s Reference, Release 13.15

5.4 Layout of the source package

There are two types of Debian source packages:

• the so-called native packages, where there is no distinction between the original sources and the patches applied
for Debian
• the (more common) packages where there's an original source tarball file accompanied by another file that con-
tains the changes made by Debian
For the native packages, the source package includes a Debian source control file (.dsc) and the source tarball (.tar.
{gz,bz2,xz}). A source package of a non-native package includes a Debian source control file, the original source
tarball (.orig.tar.{gz,bz2,xz}) and the Debian changes (.diff.gz for the source format “1.0” or .debian.tar.
{gz,bz2,xz} for the source format “3.0 (quilt)”).
With source format “1.0”, whether a package is native or not was determined by dpkg-source at build time. Nowadays
it is recommended to be explicit about the desired source format by putting either “3.0 (quilt)” or “3.0 (native)” in
debian/source/format. The rest of this section relates only to non-native packages.
The first time a version is uploaded that corresponds to a particular upstream version, the original source tar file must
be uploaded and included in the .changes file. Subsequently, this very same tar file should be used to build the new
diffs and .dsc files, and will not need to be re-uploaded.
By default, dpkg-genchanges and dpkg-buildpackage will include the original source tar file if and only if the
current changelog entry has a different upstream version from the preceding entry. This behavior may be modified by
using -sa to always include it or -sd to always leave it out.
If no original source is included in the upload, the original source tar-file used by dpkg-source when constructing the
.dsc file and diff to be uploaded must be byte-for-byte identical with the one already in the archive.
Please notice that, in non-native packages, permissions on files that are not present in the *.orig.tar.{gz,bz2,xz}
will not be preserved, as diff does not store file permissions in the patch. However, when using source format “3.0
(quilt)”, permissions of files inside the debian directory are preserved since they are stored in a tar archive.

5.5 Picking a distribution

Each upload needs to specify which distribution the package is intended for. The package build process extracts this
information from the first line of the debian/changelog file and places it in the Distribution field of the .changes
file.
Packages are normally uploaded into unstable. Uploads to unstable or experimental should use these suite names
in the changelog entry; uploads for other supported suites should use the suite codenames, as they avoid any ambiguity.
Actually, there are other possible distributions: codename-security, but read Handling security-related bugs for
more information on those.
It is not possible to upload a package into several distributions at the same time.

5.4. Layout of the source package 31

Debian Developer’s Reference, Release 13.15

5.5.1 Special case: uploads to the stable and oldstable distributions

Uploading to stable means that the package will be transferred to the proposed-updates-new queue for review
by the stable release managers, and if approved will be installed in the stable-proposed-updates directory of the
Debian archive. From there, it will be included in stable with the next point release.
Uploads to a supported stable release should target their suite name in the changelog, i.e. bookworm or bullseye.
You should normally use reportbug and the release.debian.org pseudo-package to send a source debdiff, ra-
tionale and associated bug numbers to the stable release managers, and await a request to upload or further information.
If you are confident that the upload will be accepted without changes, please feel free to upload at the same time as
filing the release.debian.org bug. However if you are new to the process, we would recommend getting approval
before uploading so you get a chance to see if your expectations align with ours.
Either way, there must be an accompanying bug for tracking, and your upload must comply with these acceptance
criteria defined by the the stable release managers. These criteria are designed to help the process be as smooth and
frustration-free as possible.
• The bug you want to fix in stable must be fixed in unstable already (and not waiting in NEW or the delayed
queue).
• The bug should be of severity "important" or higher.
• Bug meta-data - particularly affected versions - must be up to date.
• Fixes must be minimal and relevant and include a sufficiently detailed changelog entry.
• A source debdiff of the proposed change must be included in your request (not just the raw patches or "a debdiff
can be found at $URL").
• The proposed package must have a correct version number (e.g. ...+deb12u1 for bookworm or +deb11u1 for
bullseye) and you should be able to explain what testing it has had. See the Debian Policy for the version
number: https://www.debian.org/doc/debian-policy/ch-controlfields.html#special-version-conventions
• The update must be built in an stable environment or chroot (or oldstable if you target that).
• Fixes for security issues should be co-ordinated with the security team, unless they have explicitly stated that
they will not issue an DSA for the bug (e.g. via a "no-dsa" marker in the Debian Security Tracker).
• Do not close release.debian.org bugs in debian/changelog. They will be closed by the release team once
the package has reached the respective point release.
It is recommended to use reportbug as it eases the creation of bugs with correct meta-data. The release team makes
extensive use of usertags to sort and manage requests and incorrectly tagged reports may take longer to be noticed and
processed.
Uploads to the oldstable distributions are possible as long as it hasn't been archived. The same rules as for stable
apply.
In the past, uploads to stable were used to address security problems as well. However, this practice is deprecated,
as uploads used for Debian security advisories (DSA) are automatically copied to the appropriate proposed-updates
archive when the advisory is released. See Handling security-related bugs for detailed information on handling security
problems. If the security team deems the problem to be too benign to be fixed through a DSA, the stable release managers
are usually willing to include your fix nonetheless in a regular upload to stable.

32 Chapter 5. Managing Packages

 Debian Developer’s Reference, Release 13.15

5.5.2 Special case: the stable-updates suite

Sometimes the stable release managers will decide that an update to stable should be made available to users sooner
than the next scheduled point release. In such cases, they can copy the update to the stable-updates suite, use of
which is enabled by the installer by default.
Initially, the process described in Special case: uploads to the stable and oldstable distributions. should be followed as
usual. If you think that the upload should be released via stable-updates, mention this in your request. Examples
of circumstances in which the upload may qualify for such treatment are:
• The update is urgent and not of a security nature. Security updates will continue to be pushed through the security
archive. Examples include packages broken by the flow of time (c.f. spamassassin and the year 2010 problem)
and fixes for bugs introduced by point releases.
• The package in question is a data package and the data must be updated in a timely manner (e.g. tzdata).
• Fixes to leaf packages that were broken by external changes (e.g. video downloading tools and tor).
• Packages that need to be current to be useful (e.g. clamav).
• Uploads to stable-updates should target their suite name in the changelog as usual, e.g. bookworm.
Once the upload has been accepted to proposed-updates and is ready for release, the stable release man-
agers will then copy it to the stable-updates suite and issue a Stable Update Announcement (SUA) via the
debian-stable-announce mailing list.
Any updates released via stable-updates will be included in stable with the next point release as usual.

5.5.3 Special case: uploads to testing/testing-proposed-updates

Please see the information in the Direct updates to testing for details.

5.6 Uploading a package

5.6.1 Source and binary uploads

Each upload to Debian consists of a signed .changes file describing the requested change to the archive, plus the
source and binary package files that are referenced by the .changes file.
If possible, the version of a package that is uploaded should be a source-only changes file. These are typically named
*_source.changes, and reference the source package, but no binary .deb or .udeb packages. All of the correspond-
ing architecture-dependent and architecture-independent binary packages, for all architectures, will be built automati-
cally by the build daemons in a controlled and predictable environment (see wanna-build for more details). However,
there are several situations where this is not possible.
The first upload of a new source package (see New packages) must include binary packages, so that they can be reviewed
by the archive administrators before they are added to Debian.
If new binary packages are added to an existing source package, then the first upload that lists the new binary packages
in debian/control must include binary packages, again so that they can be reviewed by the archive administrators
before they are added to Debian. It is preferred for these uploads to be done via the experimental suite.
Uploads that will be held for review in other queues, such as packages being added to the *-backports suites, might
also require inclusion of binary packages.
The build daemons will automatically attempt to build any main or contrib package for which the build-dependencies
are available. Packages in non-free and non-free-firmware will not be built by the build daemons unless the
package has been marked as suitable for auto-building (see Marking non-free packages as auto-buildable).

5.6. Uploading a package 33

Debian Developer’s Reference, Release 13.15

The build daemons only install build-dependencies from the main archive area. This means that if a source package has
build-dependencies that are in the contrib, non-free or non-free-firmware archive areas, then uploads of that
package need to include prebuilt binary packages for every architecture that will be supported. By definition this can
only be the case for source packages that are themselves in the contrib, non-free or non-free-firmware archive
areas.
Bootstrapping a new architecture, or a new version of a package with circular dependencies (such as a self-hosting
compiler), will sometimes also require an upload that includes binary packages.
Binary packages in the main archive area that were not built by Debian's official build daemons will not usually be
allowed to migrate from unstable to testing, so an upload that contains binary packages built by the package's
maintainer must usually be followed by a source-only upload after the binary upload has been accepted. This restriction
does not apply to contrib, non-free or non-free-firmware packages.

5.6.2 Uploading to ftp-master

To upload a package, you should upload the files (including the signed changes and dsc file) with anonymous ftp
to ftp.upload.debian.org in the directory /pub/UploadQueue/. To get the files processed there, they need to be
signed with a key in the Debian Developers keyring or the Debian Maintainers keyring (see https://wiki.debian.org/
DebianMaintainer).
Please note that you should transfer the changes file last. Otherwise, your upload may be rejected because the archive
maintenance software will parse the changes file and see that not all files have been uploaded.
You may also find the Debian packages dupload or dput useful when uploading packages.These handy programs help
automate the process of uploading packages into Debian.
For removing packages or cancelling an upload, please see ftp://ftp.upload.debian.org/pub/UploadQueue/README
and the Debian package dcut.
Finally, you should think about the status of your package with relation to testing before uploading to unstable. If
you have a version in unstable waiting to migrate then it is generally a good idea to let it migrate before uploading
another new version. You should also check the The Debian Package Tracker for transition warnings to avoid making
uploads that disrupt ongoing transitions.

5.6.3 Delayed uploads

It is sometimes useful to upload a package immediately, but to want this package to arrive in the archive only a few
days later. For example, when preparing a Non-Maintainer Uploads (NMUs), you might want to give the maintainer a
few days to react.
An upload to the delayed directory keeps the package in the deferred uploads queue. When the specified waiting time is
over, the package is moved into the regular incoming directory for processing. This is done through automatic uploading
to ftp.upload.debian.org in upload-directory DELAYED/X-day (X between 0 and 15). 0-day is uploaded multiple
times per day to ftp.upload.debian.org.
With dput, you can use the --delayed DELAY parameter to put the package into one of the queues.

34 Chapter 5. Managing Packages

 Debian Developer’s Reference, Release 13.15

5.6.4 Security uploads

Do NOT upload a package to the security upload queue (on *.security.upload.debian.org) without prior au-
thorization from the security team. If the package does not exactly meet the team's requirements, it will cause many
problems and delays in dealing with the unwanted upload. For details, please see Handling security-related bugs.

5.6.5 Other upload queues

There is an alternative upload queue in Europe at ftp://ftp.eu.upload.debian.org/pub/UploadQueue/. It operates in the

same way as ftp.upload.debian.org, but should be faster for European developers.
Packages can also be uploaded via ssh to ssh.upload.debian.org; files should be put /srv/upload.debian.org/
UploadQueue. This queue does not support Delayed uploads.

5.6.6 Notifications

The Debian archive maintainers are responsible for handling package uploads. For the most part, uploads are auto-
matically handled on a daily basis by the archive maintenance tools, dak process-upload. Specifically, updates to
existing packages to the unstable distribution are handled automatically. In other cases, notably new packages, plac-
ing the uploaded package into the distribution is handled manually. When uploads are handled manually, the change
to the archive may take some time to occur. Please be patient.
In any case, you will receive an email notification indicating that the package has been added to the archive, which also
indicates which bugs will be closed by the upload. Please examine this notification carefully, checking if any bugs you
meant to close didn't get triggered.
The installation notification also includes information on what section the package was inserted into. If there is a
disparity, you will receive a separate email notifying you of that. Read on below.
Note that if you upload via queues, the queue daemon software will also send you a notification by email.
Also note that new uploads are announced on the IRC channels channel #debian-devel-changes. If your upload
fails silently, it could be that your package is improperly signed, in which case you can find more explanations on
ssh.upload.debian.org:/srv/upload.debian.org/queued/run/log.

5.7 Specifying the package section, subsection and priority

The debian/control file's Section and Priority fields do not actually specify where the file will be placed in the
archive, nor its priority. In order to retain the overall integrity of the archive, it is the archive maintainers who have
control over these fields. The values in the debian/control file are actually just hints.
The archive maintainers keep track of the canonical sections and priorities for packages in the override file. If
there is a disparity between the override file and the package's fields as indicated in debian/control, then you
will receive an email noting the divergence when the package is installed into the archive. You can either correct your
debian/control file for your next upload, or else you may wish to make a change in the override file.
To alter the actual section that a package is put in, you need to first make sure that the debian/control file in your pack-
age is accurate. Next, submit a bug against ftp.debian.org requesting that the section or priority for your package
be changed from the old section or priority to the new one. Use a Subject like override: PACKAGE1:section/
priority, [...], PACKAGEX:section/priority, and include the justification for the change in the body of the
bug report.
For more information about override files, see dpkg-scanpackages 1 and https://www.debian.org/Bugs/
Developer#maintincorrect.

5.7. Specifying the package section, subsection and priority 35

Debian Developer’s Reference, Release 13.15

Note that the Section field describes both the section as well as the subsection, which are described in Sections. If the
section is main, it should be omitted. The list of allowable subsections can be found in https://www.debian.org/doc/
debian-policy/ch-archive.html#s-subsections.

5.8 Handling bugs

Every developer has to be able to work with the Debian bug tracking system. This includes knowing how to file bug
reports properly (see Bug reporting), how to update them and reorder them, and how to process and close them.
The bug tracking system's features are described in the BTS documentation for developers. This includes closing bugs,
sending followup messages, assigning severities and tags, marking bugs as forwarded, and other issues.
Operations such as reassigning bugs to other packages, merging separate bug reports about the same issue, or reopening
bugs when they are prematurely closed, are handled using the so-called control mail server. All of the commands
available on this server are described in the BTS control server documentation.

5.8.1 Monitoring bugs

If you want to be a good maintainer, you should periodically check the Debian bug tracking system (BTS) for your
packages. The BTS contains all the open bugs against your packages. You can check them by browsing this page:
https://bugs.debian.org/[email protected].
Maintainers interact with the BTS via email addresses at bugs.debian.org. Documentation on available commands
can be found at https://www.debian.org/Bugs/, or, if you have installed the doc-debian package, you can look at the
local files /usr/share/doc/debian/bug-*.
Some find it useful to get periodic reports on open bugs. You can add a cron job such as the following if you want to
get a weekly email outlining all the open bugs against your packages:

# ask for weekly reports of bugs in my packages

0 17 * * fri echo "index maint address" | mail [email protected]

Replace address with your official Debian maintainer address.

5.8.2 Responding to bugs

When responding to bugs, make sure that any discussion you have about bugs is sent to the original submitter of the
bug, the bug itself and (if you are not the maintainer of the package) the maintainer. Sending an email to 123@bugs.
debian.org will send the mail to the maintainer of the package and record your email with the bug log. If you don't
remember the submitter email address, you can use [email protected] to also contact the submitter
of the bug. The latter address also records the email with the bug log, so if you are the maintainer of the package
in question, it is enough to send the reply to [email protected]. Otherwise you should include
[email protected] so that you also reach the package maintainer.
If you get a bug which mentions FTBFS, this means Fails to build from source. Porters frequently use this acronym.
Once you've dealt with a bug report (e.g. fixed it), mark it as done (close it) by sending an explanation message to
[email protected]. If you're fixing a bug by changing and uploading the package, you can automate bug
closing as described in When bugs are closed by new uploads.
You should never close bugs via the bug server close command sent to [email protected]. If you do so,
the original submitter will not receive any information about why the bug was closed.

36 Chapter 5. Managing Packages

 Debian Developer’s Reference, Release 13.15

5.8.3 Bug housekeeping

As a package maintainer, you will often find bugs in other packages or have bugs reported against your packages which
are actually bugs in other packages. The bug tracking system's features are described in the BTS documentation for
Debian developers. Operations such as reassigning, merging, and tagging bug reports are described in the BTS control
server documentation. This section contains some guidelines for managing your own bugs, based on the collective
Debian developer experience.
Filing bugs for problems that you find in other packages is one of the civic obligations of maintainership, see Bug
reporting for details. However, handling the bugs in your own packages is even more important.
Here's a list of steps that you may follow to handle a bug report:
1. Decide whether the report corresponds to a real bug or not. Sometimes users are just calling a program in the
wrong way because they haven't read the documentation. If you diagnose this, just close the bug with enough
information to let the user correct their problem (give pointers to the good documentation and so on). If the same
report comes up again and again you may ask yourself if the documentation is good enough or if the program
shouldn't detect its misuse in order to give an informative error message. This is an issue that may need to be
brought up with the upstream author.
If the bug submitter disagrees with your decision to close the bug, they may reopen it until you find an agreement
on how to handle it. If you don't find any, you may want to tag the bug wontfix to let people know that the bug
exists but that it won't be corrected. Please make sure that the bug submitter understands the reasons for your
decision by adding an explanation to the message that adds the wontfix tag.
If this situation is unacceptable, you (or the submitter) may want to require a decision of the technical committee
by filing a new bug against the tech-ctte pseudo-package with a summary of the situation. Before doing so,
please read the recommended procedure.
2. If the bug is real but it's caused by another package, just reassign the bug to the right package. If you don't know
which package it should be reassigned to, you should ask for help on IRC channels or on debian-devel@lists.
debian.org. Please inform the maintainer(s) of the package you reassign the bug to, for example by Cc:ing the
message that does the reassign to [email protected] and explaining your reasons in that
mail. Please note that a simple reassignment is not e-mailed to the maintainers of the package being reassigned
to, so they won't know about it until they look at a bug overview for their packages.
If the bug affects the operation of your package, please consider cloning the bug and reassigning the clone to the
package that really causes the behavior. Otherwise, the bug will not be shown in your package's bug list, possibly
causing users to report the same bug over and over again. You should block "your" bug with the reassigned,
cloned bug to document the relationship.
3. Sometimes you also have to adjust the severity of the bug so that it matches our definition of the severity. That's
because people tend to inflate the severity of bugs to make sure their bugs are fixed quickly. Some bugs may
even be dropped to wishlist severity when the requested change is just cosmetic.
4. If the bug is real but the same problem has already been reported by someone else, then the two relevant bug
reports should be merged into one using the merge command of the BTS. In this way, when the bug is fixed,
all of the submitters will be informed of this. (Note, however, that emails sent to one bug report's submitter
won't automatically be sent to the other report's submitter.) For more details on the technicalities of the merge
command and its relative, the unmerge command, see the BTS control server documentation.
5. The bug submitter may have forgotten to provide some information, in which case you have to ask them for the
required information. You may use the moreinfo tag to mark the bug as such. Moreover if you can't reproduce
the bug, you tag it unreproducible. Anyone who can reproduce the bug is then invited to provide more
information on how to reproduce it. After a few months, if this information has not been sent by someone, the
bug may be closed.
6. If the bug is related to the packaging, you just fix it. If you are not able to fix it yourself, then tag the bug as help.
You can also ask for help on [email protected] or [email protected]. If it's

5.8. Handling bugs 37

Debian Developer’s Reference, Release 13.15

an upstream problem, you have to forward it to the upstream author. Forwarding a bug is not enough, you have
to check at each release if the bug has been fixed or not. If it has, you just close it, otherwise you have to remind
the author about it. If you have the required skills you can prepare a patch that fixes the bug and send it to the
author at the same time. Make sure to send the patch to the BTS and to tag the bug as patch.
7. If you have fixed a bug in your local copy, or if a fix has been committed to the VCS repository, you may tag the
bug as pending to let people know that the bug is corrected and that it will be closed with the next upload (add
the closes: in the changelog). This is particularly useful if you are several developers working on the same
package.
8. Once a corrected package is available in the archive, the bug should be closed indicating the version in which it
was fixed. This can be done automatically; read When bugs are closed by new uploads.

5.8.4 When bugs are closed by new uploads

As bugs and problems are fixed in your packages, it is your responsibility as the package maintainer to close these bugs.
However, you should not close a bug until the package which fixes the bug has been accepted into the Debian archive.
Therefore, once you get notification that your updated package has been installed into the archive, you can and should
close the bug in the BTS. Also, the bug should be closed with the correct version.
However, it's possible to avoid having to manually close bugs after the upload — just list the fixed bugs in your debian/
changelog file, following a certain syntax, and the archive maintenance software will close the bugs for you. For
example:

acme-cannon (3.1415) unstable; urgency=low

* Frobbed with options (closes: Bug#98339)

* Added safety to prevent operator dismemberment, closes: bug#98765,
bug#98713, #98714.
* Added man page. Closes: #98725.

Technically speaking, the following Perl regular expression describes how bug closing changelogs are identified:

/closes:\s*(?:bug)?\#?\s?\d+(?:,\s*(?:bug)?\#?\s?\d+)*/ig

We prefer the closes: #XXX syntax, as it is the most concise entry and the easiest to integrate with the text of the
changelog. Unless specified differently by the -v-switch to dpkg-buildpackage, only the bugs closed in the most
recent changelog entry are closed (basically, exactly the bugs mentioned in the changelog-part in the .changes file are
closed).
Historically, uploads identified as Non-Maintainer Uploads (NMUs) were tagged fixed instead of being closed, but
that practice was ceased with the advent of version-tracking. The same applied to the tag fixed-in-experimental.
If you happen to mistype a bug number or forget a bug in the changelog entries, don't hesitate to undo any damage
the error caused. To reopen wrongly closed bugs, send a reopen XXX command to the bug tracking system's control
address, [email protected]. To close any remaining bugs that were fixed by your upload, email the .
changes file to [email protected], where XXX is the bug number, and put Version: YYY and an empty
line as the first two lines of the body of the email, where YYY is the first version where the bug has been fixed.
Bear in mind that it is not obligatory to close bugs using the changelog as described above. If you simply want to close
bugs that don't have anything to do with an upload you made, do it by emailing an explanation to XXX-done@bugs.
debian.org. Do not close bugs in the changelog entry of a version if the changes in that version of the package don't
have any bearing on the bug.
For general information on how to write your changelog entries, see Best practices for debian/changelog.

38 Chapter 5. Managing Packages

 Debian Developer’s Reference, Release 13.15

5.8.5 Handling security-related bugs

Due to their sensitive nature, security-related bugs must be handled carefully. The Debian Security Team exists to
coordinate this activity, keeping track of outstanding security problems, helping maintainers with security problems or
fixing them themselves, sending security advisories, and maintaining security.debian.org.
When you become aware of a security-related bug in a Debian package, whether or not you are the maintainer, col-
lect pertinent information about the problem, and promptly contact the security team by emailing team@security.
debian.org. If desired, email can be encrypted with the Debian Security Contact key, see https://www.debian.org/
security/faq#contact for details. DO NOT UPLOAD any packages for stable without contacting the team. Useful
information includes, for example:
• Whether or not the bug is already public.
• Which versions of the package are known to be affected by the bug. Check each version that is present in a
supported Debian release, as well as testing and unstable.
• The nature of the fix, if any is available (patches are especially helpful)
• Any fixed packages that you have prepared yourself (send the resulting debdiff or alternatively only the .diff.gz
and .dsc files and read Preparing packages to address security issues first)
• Any assistance you can provide to help with testing (exploits, regression testing, etc.)
• Any information needed for the advisory (see Security Advisories)
As the maintainer of the package, you have the responsibility to maintain it, even in the stable release. You are in the
best position to evaluate patches and test updated packages, so please see the sections below on how to prepare packages
for the Security Team to handle.

5.8.5.1 Debian Security Tracker

The security team maintains a central database, the Debian Security Tracker. This contains all public information that
is known about security issues: which packages and versions are affected or fixed, and thus whether stable, testing
and/or unstable are vulnerable. Information that is still confidential is not added to the tracker.
You can search it for a specific issue, but also on package name. Look for your package to see which issues are still open.
If you can, please provide more information about those issues, or help to address them in your package. Instructions
are on the tracker web pages.

5.8.5.2 Confidentiality

Unlike most other activities within Debian, information about security issues must sometimes be kept private for a time.
This allows software distributors to coordinate their disclosure in order to minimize their users' exposure. Whether this
is the case depends on the nature of the problem and corresponding fix, and whether it is already a matter of public
knowledge.
There are several ways developers can learn of a security problem:
• they notice it on a public forum (mailing list, web site, etc.)
• someone files a bug report
• someone informs them via private email
In the first two cases, the information is public and it is important to have a fix as soon as possible. In the last case,
however, it might not be public information. In that case there are a few possible options for dealing with the problem:
• If the security exposure is minor, there is sometimes no need to keep the problem a secret and a fix should be
made and released.

5.8. Handling bugs 39

Debian Developer’s Reference, Release 13.15

• If the problem is severe, it is preferable to share the information with other vendors and coordinate a release. The
security team keeps in contact with the various organizations and individuals and can take care of that.
In all cases if the person who reports the problem asks that it not be disclosed, such requests should be honored, with
the obvious exception of informing the security team in order that a fix may be produced for a stable release of Debian.
When sending confidential information to the security team, be sure to mention this fact.
Please note that if secrecy is needed you may not upload a fix to unstable (or anywhere else, such as a public VCS
repository). It is not sufficient to obfuscate the details of the change, as the code itself is public, and can (and will) be
examined by the general public.
There are two reasons for releasing information even though secrecy is requested: the problem has been known for a
while, or the problem or exploit has become public.
The Security Team has a PGP-key to enable encrypted communication about sensitive issues. See the Security Team
FAQ for details.

5.8.5.3 Security Advisories

Security advisories are only issued for the current, released stable distribution, and not for testing or unstable.
When released, advisories are sent to the [email protected] mailing list and posted
on the security web page. Security advisories are written and posted by the security team. However they certainly do
not mind if a maintainer can supply some of the information for them, or write part of the text. Information that should
be in an advisory includes:
• A description of the problem and its scope, including:
– The type of problem (privilege escalation, denial of service, etc.)
– What privileges may be gained, and by whom (if any)
– How it can be exploited
– Whether it is remotely or locally exploitable
– How the problem was fixed
This information allows users to assess the threat to their systems.
• Version numbers of affected packages
• Version numbers of fixed packages
• Information on where to obtain the updated packages (usually from the Debian security archive)
• References to upstream advisories, CVE identifiers, and any other information useful in cross-referencing the
vulnerability

5.8.5.4 Preparing packages to address security issues

One way that you can assist the security team in their duties is to provide them with fixed packages suitable for a security
advisory for the stable Debian release.
When an update is made to the stable release, care must be taken to avoid changing system behavior or introducing new
bugs. In order to do this, make as few changes as possible to fix the bug. Users and administrators rely on the exact
behavior of a release once it is made, so any change that is made might break someone's system. This is especially
true of libraries: make sure you never change the API (Application Program Interface) or ABI (Application Binary
Interface), no matter how small the change.

40 Chapter 5. Managing Packages

 Debian Developer’s Reference, Release 13.15

This means that moving to a new upstream version is not a good solution. Instead, the relevant changes should be
back-ported to the version present in the current stable Debian release. Generally, upstream maintainers are willing to
help if needed. If not, the Debian security team may be able to help.
In some cases, it is not possible to back-port a security fix, for example when large amounts of source code need to be
modified or rewritten. If this happens, it may be necessary to move to a new upstream version. However, this is only
done in extreme situations, and you must always coordinate that with the security team beforehand.
Related to this is another important guideline: always test your changes. If you have an exploit available, try it and see
if it indeed succeeds on the unpatched package and fails on the fixed package. Test other, normal actions as well, as
sometimes a security fix can break seemingly unrelated features in subtle ways.
Do NOT include any changes in your package which are not directly related to fixing the vulnerability. These will only
need to be reverted, and this wastes time. If there are other bugs in your package that you would like to fix, make an
upload to proposed-updates in the usual way, after the security advisory is issued. The security update mechanism is
not a means for introducing changes to your package which would otherwise be rejected from the stable release, so
please do not attempt to do this.
Review and test your changes as much as possible. Check the differences from the previous version repeatedly
(interdiff from the patchutils package and debdiff from devscripts are useful tools for this, see debdiff ).
Be sure to verify the following items:
• Target the right distribution in your debian/changelog: codename-security (e.g. bookworm-security).
Do not target distribution-proposed-updates or stable!
• Make descriptive, meaningful changelog entries. Others will rely on them to determine whether a particular bug
was fixed. Add closes: statements for any Debian bugs filed. Always include an external reference, preferably
a CVE identifier, so that it can be cross-referenced. However, if a CVE identifier has not yet been assigned, do
not wait for it but continue the process. The identifier can be cross-referenced later.
• Make sure the version number is proper. It must be greater than the current package, but less than package
versions in later distributions. If in doubt, test it with dpkg --compare-versions. Be careful not to re-use
a version number that you have already used for a previous upload, or one that conflicts with a binNMU. The
convention is to append +debXu1 (where X is the major release number), e.g. 1:2.4.3-4+deb12u1, of course
increasing 1 for any subsequent uploads.
• Unless the upstream source has been uploaded to security.debian.org before (by a previous security up-
date), build the upload with full upstream source (dpkg-buildpackage -sa). If there has been a previous
upload to security.debian.org with the same upstream version, you may upload without upstream source
(dpkg-buildpackage -sd).
• Be sure to use the exact same ``*.orig.tar.{gz,bz2,xz}`` as used in the normal archive, otherwise it is not possible
to move the security fix into the main archives later.
• Build the package on a clean system which only has packages installed from the distribution you are building
for. If you do not have such a system yourself, you can use a debian.org machine (see Debian machines) or setup
a chroot (see pbuilder and debootstrap).

5.8. Handling bugs 41

Debian Developer’s Reference, Release 13.15

5.8.5.5 Uploading the fixed package

Do NOT upload a package to the security upload queue (on *.security.upload.debian.org) without prior au-
thorization from the security team. If the package does not exactly meet the team's requirements, it will cause many
problems and delays in dealing with the unwanted upload.
Do NOT upload your fix to proposed-updates without coordinating with the security team. Packages from
security.debian.org will be copied into the proposed-updates directory automatically. If a package with the
same or a higher version number is already installed into the archive, the security update will be rejected by the archive
system. That way, the stable distribution will end up without a security update for this package instead.
Once you have created and tested the new package and it has been approved by the security team, it needs to be uploaded
so that it can be installed in the archives. For security uploads, the place to upload to is ftp://ftp.security.
upload.debian.org/pub/SecurityUploadQueue/.
Once an upload to the security queue has been accepted, the package will automatically be built for all architectures
and stored for verification by the security team.
Uploads that are waiting for acceptance or verification are only accessible by the security team. This is necessary since
there might be fixes for security problems that cannot be disclosed yet.
If a member of the security team accepts a package, it will be installed on security.debian.org as well as proposed
for the proper distribution-proposed-updates on ftp-master.debian.org.

5.9 Moving, removing, renaming, orphaning, adopting, and reintro-

ducing packages

Some archive manipulation operations are not automated in the Debian upload process. These procedures should be
manually followed by maintainers. This chapter gives guidelines on what to do in these cases.

5.9.1 Moving packages

Sometimes a package will change its section. For instance, a package from the non-free section might be GPL'd in a
later version, in which case the package should be moved to main or contrib.1
If you need to change the section for one of your packages, change the package control information to place the package
in the desired section, and re-upload the package (see the Debian Policy Manual for details). You must ensure that you
include the .orig.tar.{gz,bz2,xz} in your upload (even if you are not uploading a new upstream version), or it
will not appear in the new section together with the rest of the package. If your new section is valid, it will be moved
automatically. If it does not, then contact the ftpmasters in order to understand what happened.
If, on the other hand, you need to change the subsection of one of your packages (e.g., devel, admin), the procedure
is slightly different. Correct the subsection as found in the control file of the package, and re-upload that. Also, you'll
need to get the override file updated, as described in Specifying the package section, subsection and priority.
1 See the Debian Policy Manual for guidelines on what section a package belongs in.

42 Chapter 5. Managing Packages

 Debian Developer’s Reference, Release 13.15

5.9.2 Removing packages

If for some reason you want to completely remove a package (say, if it is an old compatibility library which is no
longer required), you need to file a bug against ftp.debian.org asking that the package be removed; as with all bugs,
this bug should normally have normal severity. The bug title should be in the form RM: package [architecture list]
-- reason, where package is the package to be removed and reason is a short summary of the reason for the removal
request. [architecture list] is optional and only needed if the removal request only applies to some architectures, not
all. Note that the reportbug will create a title conforming to these rules when you use it to report a bug against the
ftp.debian.org pseudo-package.
If you want to remove a package you maintain, you should note this in the bug title by prepending ROM (Request
Of Maintainer). There are several other standard acronyms used in the reasoning for a package removal; see https:
//ftp-master.debian.org/removals.html for a complete list. That page also provides a convenient overview of pending
removal requests.
Note that removals can only be done for the unstable, experimental and stable distributions. Packages are not
removed from testing directly. Rather, they will be removed automatically after the package has been removed from
unstable and no package in testing depends on it. (Removals from testing are possible though by filing a removal
bug report against the release.debian.org pseudo-package. See Removals from testing.)
There is one exception when an explicit removal request is not necessary: If a (source or binary) package is no longer
built from source, it will be removed semi-automatically. For a binary-package, this means if there is no longer any
source package producing this binary package; if the binary package is just no longer produced on some architectures,
a removal request is still necessary. For a source-package, this means that all binary packages it refers to have been
taken over by another source package.
In your removal request, you have to detail the reasons justifying the request. This is to avoid unwanted removals and to
keep a trace of why a package has been removed. For example, you can provide the name of the package that supersedes
the one to be removed.
Usually you only ask for the removal of a package maintained by yourself. If you want to remove another package, you
have to get the approval of its maintainer. Should the package be orphaned and thus have no maintainer, you should
first discuss the removal request on [email protected]. If there is a consensus that the package should
be removed, you should reassign and retitle the O: bug filed against the wnpp package instead of filing a new bug as
removal request.
Further information relating to these and other package removal related topics may be found at https://wiki.debian.org/
ftpmaster_Removalsand https://qa.debian.org/howto-remove.html.
If in doubt concerning whether a package is disposable, email [email protected] asking for opin-
ions. Also of interest is the apt-cache program from the apt package. When invoked as apt-cache showpkg pack-
age, the program will show details for package, including reverse depends. Other useful programs include apt-cache
rdepends, apt-rdepends, build-rdeps (in the devscripts package) and grep-dctrl. Removal of orphaned
packages is discussed on [email protected].
Once the package has been removed, the package's bugs should be handled. They should either be reassigned to
another package in the case where the actual code has evolved into another package (e.g. libfoo12 was removed
because libfoo13 supersedes it) or closed if the software is simply no longer part of Debian. When closing the bugs,
to avoid marking the bugs as fixed in versions of the packages in previous Debian releases, they should be marked as
fixed in the version <most-recent-version-ever-in-Debian>+rm.

5.9. Moving, removing, renaming, orphaning, adopting, and reintroducing packages 43

Debian Developer’s Reference, Release 13.15

5.9.2.1 Removing packages from Incoming

In the past, it was possible to remove packages from incoming. However, with the introduction of the new incoming
system, this is no longer possible.4 Instead, you have to upload a new revision of your package with a higher version
than the package you want to replace. Both versions will be installed in the archive but only the higher version will
actually be available in unstable since the previous version will immediately be replaced by the higher. However, if
you do proper testing of your packages, the need to replace a package should not occur too often anyway.

5.9.3 Replacing or renaming packages

When the upstream maintainers for one of your packages chose to rename their software (or you made a mistake naming
your package), you should follow a two-step process to rename it. In the first step, change the debian/control file
to reflect the new name and to replace, provide and conflict with the obsolete package name (see the Debian Policy
Manual for details). Please note that you should only add a Provides relation if all packages depending on the obsolete
package name continue to work after the renaming. Once you've uploaded the package and the package has moved into
the archive, file a bug against ftp.debian.org asking to remove the package with the obsolete name (see Removing
packages). Do not forget to properly reassign the package's bugs at the same time.
At other times, you may make a mistake in constructing your package and wish to replace it. The only way to do this
is to increase the version number and upload a new version. The old version will be expired in the usual manner. Note
that this applies to each part of your package, including the sources: if you wish to replace the upstream source tarball
of your package, you will need to upload it with a different version. An easy possibility is to replace foo_1.00.orig.
tar.gz with foo_1.00+0.orig.tar.gz or foo_1.00.orig.tar.bz2. This restriction gives each file on the ftp
site a unique name, which helps to ensure consistency across the mirror network.

5.9.4 Orphaning a package

If you can no longer maintain a package, you need to inform others, and see that the package is marked as orphaned.
You should set the package maintainer to Debian QA Group <[email protected]> and submit a bug report
against the pseudo package wnpp. The bug report should be titled O: package -- short description indicating that the
package is now orphaned. The severity of the bug should be set to normal; if the package has a priority of standard or
higher, it should be set to important. If you feel it's necessary, send a copy to [email protected] by
putting the address in the X-Debbugs-CC: header of the message (no, don't use CC:, because that way the message's
subject won't indicate the bug number).
If you just intend to give the package away, but you can keep maintainership for the moment, then you should instead
submit a bug against wnpp and title it RFA: package -- short description. RFA stands for Request For Adoption.
More information is on the WNPP web pages.

5.9.5 Adopting a package

A list of packages in need of a new maintainer is available in the Work-Needing and Prospective Packages list (WNPP).
If you wish to take over maintenance of any of the packages listed in the WNPP, please take a look at the aforementioned
page for information and procedures.
It is not OK to simply take over a package without assent of the current maintainer — that would be package hijacking.
You can, of course, contact the current maintainer and ask them for permission to take over the package.
However, when a package has been neglected by the maintainer, you might be able to take over package maintainer-
ship by following the package salvaging process as described in Package Salvaging. If you have reason to believe a
maintainer is no longer active at all, see Dealing with inactive and/or unreachable maintainers.
4 Though, if a package still is in the upload queue and hasn't been moved to Incoming yet, it can be removed. (see Uploading to ftp-master)

44 Chapter 5. Managing Packages

 Debian Developer’s Reference, Release 13.15

Complaints about maintainers should be brought up on the developers' mailing list. If the discussion doesn't end with a
positive conclusion, and the issue is of a technical nature, consider bringing it to the attention of the technical committee
(see the technical committee web page for more information).
If you take over an old package, you probably want to be listed as the package's official maintainer in the bug system.
This will happen automatically once you upload a new version with an updated Maintainer field, although it can take
a few hours after the upload is done. If you do not expect to upload a new version for a while, you can use The Debian
Package Tracker to get the bug reports. However, make sure that the old maintainer has no problem with the fact that
they will continue to receive the bugs during that time.

5.9.6 Reintroducing packages

Packages are often removed due to release-critical bugs, absent maintainers, too few users or poor quality in general.
While the process of reintroduction is similar to the initial packaging process, you can avoid some pitfalls by doing
some historical research first.
You should check why the package was removed in the first place. This information can be found in the removal item in
the news section of the PTS page for the package or by browsing the log of removals. The removal bug will tell you why
the package was removed and will give some indication of what you will need to work on in order to reintroduce the
package. It may indicate that the best way forward is to switch to some other piece of software instead of reintroducing
the package.
It may be appropriate to contact the former maintainers to find out if they are working on reintroducing the package,
interested in co-maintaining the package or interested in sponsoring the package if needed.
You should do all the things required before introducing new packages (New packages).
You should base your work on the latest packaging available that is suitable. That might be the latest version from
unstable, which will still be present in the snapshot archive.
The version control system used by the previous maintainer might contain useful changes, so it might be a good idea
to have a look there. Check if the control file of the previous package contained any headers linking to the version
control system for the package and if it still exists.
Package removals from unstable (not testing, stable or oldstable) trigger the closing of all bugs related to the
package. You should look through all the closed bugs (including archived bugs) and unarchive and reopen any that
were closed in a version ending in +rm and still apply. Any that no longer apply should be marked as fixed in the correct
version if that is known.
Package removals from unstable also trigger marking the package as removed in the Debian Security Tracker. Debian
members should mark removed issues as unfixed in the security tracker repository and all others should contact the
security team to report reintroduced packages.

5.10 Porting and being ported

Debian supports an ever-increasing number of architectures. Even if you are not a porter, and you don't use any archi-
tecture but one, it is part of your duty as a maintainer to be aware of issues of portability. Therefore, even if you are not
a porter, you should read most of this chapter.
Porting is the act of building Debian packages for architectures that are different from the original architecture of
the package maintainer's binary package. It is a unique and essential activity. In fact, porters do most of the actual
compiling of Debian packages. For instance, when a maintainer uploads a (portable) source package with binaries for
the i386 architecture, it will be built for each of the other architectures, amounting to 10 more builds.

5.10. Porting and being ported 45

Debian Developer’s Reference, Release 13.15

5.10.1 Being kind to porters

Porters have a difficult and unique task, since they are required to deal with a large volume of packages. Ideally, every
source package should build right out of the box. Unfortunately, this is often not the case. This section contains a
checklist of gotchas often committed by Debian maintainers — common problems which often stymie porters, and
make their jobs unnecessarily difficult.
The first and most important thing is to respond quickly to bugs or issues raised by porters. Please treat porters with
courtesy, as if they were in fact co-maintainers of your package (which, in a way, they are). Please be tolerant of succinct
or even unclear bug reports; do your best to hunt down whatever the problem is.
By far, most of the problems encountered by porters are caused by packaging bugs in the source packages. Here is a
checklist of things you should check or be aware of.
1. Make sure that your Build-Depends and Build-Depends-Indep settings in debian/control are set prop-
erly. The best way to validate this is to use the debootstrap package to create an unstable chroot environment
(see debootstrap). Within that chrooted environment, install the build-essential package and any package
dependencies mentioned in Build-Depends and/or Build-Depends-Indep. Finally, try building your pack-
age within that chrooted environment. These steps can be automated by the use of the pbuilder program, which
is provided by the package of the same name (see pbuilder).
If you can't set up a proper chroot, dpkg-depcheck may be of assistance (see dpkg-depcheck).
See the Debian Policy Manual for instructions on setting build dependencies.
2. Don't set architecture to a value other than all or any unless you really mean it. In too many cases, maintainers
don't follow the instructions in the Debian Policy Manual. Setting your architecture to only one architecture (such
as i386 or amd64) is usually incorrect.
3. Make sure your source package is correct. Do dpkg-source -x package.dsc to make sure your source package
unpacks properly. Then, in there, try building your package from scratch with dpkg-buildpackage.
4. Make sure you don't ship your source package with the debian/files or debian/substvars files. They
should be removed by the clean target of debian/rules.
5. Make sure you don't rely on locally installed or hacked configurations or programs. For instance, you should
never be calling programs in /usr/local/bin or the like. Try not to rely on programs being set up in a special
way. Try building your package on another machine, even if it's the same architecture.
6. Don't depend on the package you're building being installed already (a sub-case of the above issue). There are,
of course, exceptions to this rule, but be aware that any case like this needs manual bootstrapping and cannot be
done by automated package builders.
7. Don't rely on the compiler being a certain version, if possible. If not, then make sure your build dependencies
reflect the restrictions, although you are probably asking for trouble, since different architectures sometimes
standardize on different compilers.
8. Make sure your debian/rules contains separate binary-arch and binary-indep targets, as the Debian
Policy Manual requires. Make sure that both targets work independently, that is, that you can call the target
without having called the other before. To test this, try to run dpkg-buildpackage -B.
9. When you can't support your package on a particular architecture, you shouldn't use the Architecture field to
reflect that (it's also a pain to maintain correctly). If the package fails to build from source, you can just let it be
and interested people can take a look at the build logs. If the package would actually build, the trick is to add
a Build-Depends on unsupported-architecture [!the-not-supported-arch]. The buildds will not
build the package as the build dependencies are not fullfiled on that arch. To prevent building on 32-bits architec-
tures, the architecture-is-64bit build dependency can be used, as architecture-is-little-endian
can be used to prevent building on big endian systems.

46 Chapter 5. Managing Packages

 Debian Developer’s Reference, Release 13.15

5.10.2 Guidelines for porter uploads

If the package builds out of the box for the architecture to be ported to, you are in luck and your job is easy. This section
applies to that case; it describes how to build and upload your binary package so that it is properly installed into the
archive. If you do have to patch the package in order to get it to compile for the other architecture, you are actually
doing a source NMU, so consult When and how to do an NMU instead.
For a porter upload, no changes are being made to the source. You do not need to touch any of the files in the source
package. This includes debian/changelog.
The way to invoke dpkg-buildpackage is as dpkg-buildpackage -B -m porter-email. Of course, set porter-email
to your email address. This will do a binary-only build of only the architecture-dependent portions of the package, using
the binary-arch target in debian/rules.
If you are working on a Debian machine for your porting efforts and you need to sign your upload locally for its
acceptance in the archive, you can run debsign on your .changes file to have it signed conveniently, or use the
remote signing mode of dpkg-sig.

5.10.2.1 Recompilation or binary-only NMU

Sometimes the initial porter upload is problematic because the environment in which the package was built was not
good enough (outdated or obsolete library, bad compiler, etc.). Then you may just need to recompile it in an updated
environment. However, you have to bump the version number in this case, so that the old bad package can be replaced
in the Debian archive (dak refuses to install new packages if they don't have a version number greater than the currently
available one).
You have to make sure that your binary-only NMU doesn't render the package uninstallable. This could happen when a
source package generates arch-dependent and arch-independent packages that have inter-dependencies generated using
dpkg's substitution variable $(Source-Version).
Despite the required modification of the changelog, these are called binary-only NMUs — there is no need in this case
to trigger all other architectures to consider themselves out of date or requiring recompilation.
Such recompilations require special magic version numbering, so that the archive maintenance tools recognize that,
even though there is a new Debian version, there is no corresponding source update. If you get this wrong, the archive
maintainers will reject your upload (due to lack of corresponding source code).
The magic for a recompilation-only NMU is triggered by using a suffix appended to the package version number,
following the form bnumber. For instance, if the latest version you are recompiling against was version 2.9-3, your
binary-only NMU should carry a version of 2.9-3+b1. If the latest version was 3.4+b1 (i.e, a native package with a
previous recompilation NMU), your binary-only NMU should have a version number of 3.4+b2.2
Similar to initial porter uploads, the correct way of invoking dpkg-buildpackage is dpkg-buildpackage -B to
only build the architecture-dependent parts of the package.
2 In the past, such NMUs used the third-level number on the Debian part of the revision to denote their recompilation-only status; however, this

syntax was ambiguous with native packages and did not allow proper ordering of recompile-only NMUs, source NMUs, and security NMUs on the
same package, and has therefore been abandoned in favor of this new syntax.

5.10. Porting and being ported 47

Debian Developer’s Reference, Release 13.15

5.10.2.2 When to do a source NMU if you are a porter

Porters doing a source NMU generally follow the guidelines found in Non-Maintainer Uploads (NMUs), just like non-
porters. However, it is expected that the wait cycle for a porter's source NMU is smaller than for a non-porter, since
porters have to cope with a large quantity of packages. Again, the situation varies depending on the distribution they
are uploading to. It also varies whether the architecture is a candidate for inclusion into the next stable release; the
release managers decide and announce which architectures are candidates.
If you are a porter doing an NMU for unstable, the above guidelines for porting should be followed, with two varia-
tions. Firstly, the acceptable waiting period — the time between when the bug is submitted to the BTS and when it is
OK to do an NMU — is seven days for porters working on the unstable distribution. This period can be shortened
if the problem is critical and imposes hardship on the porting effort, at the discretion of the porter group. (Remember,
none of this is Policy, just mutually agreed upon guidelines.) For uploads to stable or testing, please coordinate
with the appropriate release team first.
Secondly, porters doing source NMUs should make sure that the bug they submit to the BTS should be of severity
serious or greater. This ensures that a single source package can be used to compile every supported Debian ar-
chitecture by release time. It is very important that we have one version of the binary and source package for all
architectures in order to comply with many licenses.
Porters should try to avoid patches which simply kludge around bugs in the current version of the compile environment,
kernel, or libc. Sometimes such kludges can't be helped. If you have to kludge around compiler bugs and the like, make
sure you #ifdef your work properly; also, document your kludge so that people know to remove it once the external
problems have been fixed.
Porters may also have an unofficial location where they can put the results of their work during the waiting period. This
helps others running the port have the benefit of the porter's work, even during the waiting period. Of course, such
locations have no official blessing or status, so buyer beware.

5.10.3 Porting infrastructure and automation

There is infrastructure and several tools to help automate package porting. This section contains a brief overview of
this automation and porting to these tools; see the package documentation or references for full information.

5.10.3.1 Mailing lists and web pages

Web pages containing the status of each port can be found at https://www.debian.org/ports/.
Each port of Debian has a mailing list. The list of porting mailing lists can be found at https://lists.debian.org/ports.html.
These lists are used to coordinate porters, and to connect the users of a given port with the porters.

5.10.3.2 Porter tools

Descriptions of several porting tools can be found in Porting tools.

48 Chapter 5. Managing Packages

 Debian Developer’s Reference, Release 13.15

5.10.3.3 wanna-build

The wanna-build system is used as a distributed, client-server build distribution system. It is usually used in conjunc-
tion with build daemons running the buildd program. Build daemons are slave hosts, which contact the central
wanna-build system to receive a list of packages that need to be built.
wanna-build is not yet available as a package; however, all Debian porting efforts are using it for automated package
building. The tool used to do the actual package builds, sbuild, is available as a package; see its description in sbuild.
Please note that the packaged version is not the same as the one used on build daemons, but it is close enough to
reproduce problems.
Most of the data produced by wanna-build that is generally useful to porters is available on the web at https://buildd.
debian.org/. This data includes nightly updated statistics, queueing information and logs for build attempts.
We are quite proud of this system, since it has so many possible uses. Independent development groups can use the
system for different sub-flavors of Debian, which may or may not really be of general interest (for instance, a flavor of
Debian built with gcc bounds checking). It will also enable Debian to recompile entire distributions quickly.
The wanna-build team, in charge of the buildds, can be reached at [email protected]. To
determine who (wanna-build team, release team) and how (mail, BTS) to contact, refer to https://lists.debian.org/
debian-project/2009/03/msg00096.html.
When requesting binNMUs or give-backs (retries after a failed build), please use the format described at https://release.
debian.org/wanna-build.txt.

5.10.4 When your package is not portable

Some packages still have issues with building and/or working on some of the architectures supported by Debian, and
cannot be ported at all, or not within a reasonable amount of time. An example is a package that is SVGA-specific
(only available for i386 and amd64), or uses other hardware-specific features not supported on all architectures.
In order to prevent broken packages from being uploaded to the archive, and wasting buildd time, you need to do a few
things:
• First, make sure your package does fail to build on architectures that it cannot support. There are a few ways to
achieve this. The preferred way is to have a small testsuite during build time that will test the functionality, and
fail if it doesn't work. This is a good idea anyway, as this will prevent (some) broken uploads on all architectures,
and also will allow the package to build as soon as the required functionality is available.
Additionally, if you believe the list of supported architectures is pretty constant, you should change any to a list
of supported architectures in debian/control. This way, the build will fail also, and indicate this to a human
reader without actually trying.
• In order to prevent autobuilders from needlessly trying to build your package, it must be included in
Packages-arch-specific, a list used by the wanna-build script. The current version is available as
https://wiki.debian.org/PackagesArchSpecific; please see the top of the file for whom to contact for changes.
Please note that it is insufficient to only add your package to Packages-arch-specific without making it fail to build
on unsupported architectures: A porter or any other person trying to build your package might accidentally upload it
without noticing it doesn't work. If in the past some binary packages were uploaded on unsupported architectures,
request their removal by filing a bug against ftp.debian.org.

5.10. Porting and being ported 49

Debian Developer’s Reference, Release 13.15

5.10.5 Marking non-free packages as auto-buildable

By default packages from the non-free and non-free-firmware sections are not built by the autobuilder network
(mostly because the license of the packages could disapprove). To enable a package to be built, you need to perform
the following steps:
1. Check whether it is legally allowed and technically possible to auto-build the package;
2. Add XS-Autobuild: yes into the header part of debian/control;
3. Send an email to [email protected] and explain why the package can legitimately and technically
be auto-built.

5.11 Non-Maintainer Uploads (NMUs)

Every package has one or more maintainers. Normally, these are the people who work on and upload new versions of
the package. In some situations, it is useful that other developers can upload a new version as well, for example if they
want to fix a bug in a package they don't maintain, when the maintainer needs help to respond to issues. Such uploads
are called Non-Maintainer Uploads (NMU).

5.11.1 When and how to do an NMU

Before doing an NMU, consider the following questions:

• Have you geared the NMU towards helping the maintainer? As there might be disagreement on the notion of
whether the maintainer actually needs help on not, the DELAYED queue exists to give time to the maintainer to
react and has the beneficial side-effect of allowing for independent reviews of the NMU diff.
• Does your NMU really fix bugs? ("Bugs" means any kind of bugs, e.g. wishlist bugs for packaging a new
upstream version, but care should be taken to minimize the impact to the maintainer.) Fixing cosmetic issues or
changing the packaging style in NMUs is discouraged.
• Did you give enough time to the maintainer? When was the bug reported to the BTS? Being busy for a week or
two isn't unusual. Is the bug so severe that it needs to be fixed right now, or can it wait a few more days?
• How confident are you about your changes? Please remember the Hippocratic Oath: "Above all, do no harm."
It is better to leave a package with an open grave bug than applying a non-functional patch, or one that hides the
bug instead of resolving it. If you are not 100% sure of what you did, it might be a good idea to seek advice from
others. Remember that if you break something in your NMU, many people will be very unhappy about it.
• Have you clearly expressed your intention to NMU, at least in the BTS? If that didn't generate any feedback, it
might also be a good idea to try to contact the maintainer by other means (email to the maintainer addresses or
private email, IRC).
• If the maintainer is usually active and responsive, have you tried to contact them? In general it should be consid-
ered preferable that maintainers take care of an issue themselves and that they are given the chance to review and
correct your patch, because they can be expected to be more aware of potential issues which an NMUer might
miss. It is often a better use of everyone's time if the maintainer is given an opportunity to upload a fix on their
own.
When doing an NMU, you must first make sure that your intention to NMU is clear. Then, you must send a patch
with the differences between the current package and your proposed NMU to the BTS. The nmudiff script in the
devscripts package might be helpful.
While preparing the patch, you had better be aware of any package-specific practices that the maintainer might be
using. Taking them into account reduces the burden of integrating your changes into the normal package workflow and

50 Chapter 5. Managing Packages

 Debian Developer’s Reference, Release 13.15

thus increases the chances that integration will happen. A good place to look for possible package-specific practices is
debian/README.source.
Unless you have an excellent reason not to do so, you must then give some time to the maintainer to react (for example,
by uploading to the DELAYED queue). Here are some recommended values to use for delays:
• Upload fixing only release-critical bugs older than 7 days, with no maintainer activity on the bug for 7 days and
no indication that a fix is in progress: 0 days
• Upload fixing only release-critical bugs older than 7 days: 2 days
• Upload fixing only release-critical and important bugs: 5 days
• Other NMUs: 10 days
Those delays are only examples. In some cases, such as uploads fixing security issues, or fixes for trivial bugs that
block a transition, it is desirable that the fixed package reaches unstable sooner.
Sometimes, release managers decide to encourage NMUs with shorter delays for a subset of bugs (e.g release-critical
bugs older than 7 days). Also, some maintainers list themselves in the Low Threshold NMU list, and accept that NMUs
are uploaded without delay. But even in those cases, it's still a good idea to give the maintainer a few days to react before
you upload, especially if the patch wasn't available in the BTS before, or if you know that the maintainer is generally
active.
After you upload an NMU, you are responsible for the possible problems that you might have introduced. You must
keep an eye on the package (subscribing to the package on the PTS is a good way to achieve this).
This is not a license to perform NMUs thoughtlessly. If you NMU when it is clear that the maintainers are active and
would have acknowledged a patch in a timely manner, or if you ignore the recommendations of this document, your
upload might be a cause of conflict with the maintainer. You should always be prepared to defend the wisdom of any
NMU you perform on its own merits.

5.11.2 NMUs and debian/changelog

Just like any other (source) upload, NMUs must add an entry to debian/changelog, telling what has changed with
this upload. The first line of this entry must explicitly mention that this upload is an NMU, e.g.:

* Non-maintainer upload.

The way to version NMUs differs for native and non-native packages.
If the package is a native package (without a Debian revision in the version number), the version must be the version
of the last maintainer upload, plus +nmuX, where X is a counter starting at 1. If the last upload was also an NMU, the
counter should be increased. For example, if the current version is 1.5, then an NMU would get version 1.5+nmu1.
If the package is not a native package, you should add a minor version number to the Debian revision part of the version
number (the portion after the last hyphen). This extra number must start at 1. For example, if the current version is
1.5-2, then an NMU would get version 1.5-2.1. If a new upstream version is packaged in the NMU, the Debian
revision is set to 0, for example 1.6-0.1.
In both cases, if the last upload was also an NMU, the counter should be increased. For example, if the current version
is 1.5+nmu3 (a native package which has already been NMUed), the NMU would get version 1.5+nmu4.
A special versioning scheme is needed to avoid disrupting the maintainer's work, since using an integer for the Debian
revision will potentially conflict with a maintainer upload already in preparation at the time of an NMU, or even one
sitting in the ftp NEW queue. It also has the benefit of making it visually clear that a package in the archive was not
made by the official maintainer.
If you upload a package to testing or stable, you sometimes need to "fork" the version number tree. This is the case for
security uploads, for example. For this, a version of the form +debXuY should be used, where X is the major release

5.11. Non-Maintainer Uploads (NMUs) 51

Debian Developer’s Reference, Release 13.15

number, and Y is a counter starting at 1. For example, while bookworm (Debian 12) is stable, a security NMU to stable
for a package at version 1.5-3 would have version 1.5-3+deb12u1, whereas a security upload to trixie would get
version 1.5-3+deb13u1.

5.11.3 Using the DELAYED/ queue

Having to wait for a response after you request permission to NMU is inefficient, because it costs the NMUer a context
switch to come back to the issue. The DELAYED queue (see Delayed uploads) allows the developer doing the NMU to
perform all the necessary tasks at the same time. For instance, instead of telling the maintainer that you will upload the
updated package in 7 days, you should upload the package to DELAYED/7 and tell the maintainer that they have 7 days
to react. During this time, the maintainer can ask you to delay the upload some more, or cancel your upload.
You can cancel your upload using dcut. In case you uploaded foo_1.2-1.1_all.changes to a DELAYED queue, you
can run dcut cancel foo_1.2-1.1_all.changes to cancel your upload. The .changes file does not need to be
present locally as you instruct dcut to upload a command file removing a remote filename. The .changes file name is
the same that you used when uploading.
The DELAYED queue should not be used to put additional pressure on the maintainer. In particular, it's important that
you are available to cancel or delay the upload before the delay expires since the maintainer cannot cancel the upload
themselves.
If you make an NMU to DELAYED and the maintainer updates the package before the delay expires, your upload will
be rejected because a newer version is already available in the archive. Ideally, the maintainer will take care to include
your proposed changes (or at least a solution for the problems they address) in that upload.

5.11.4 NMUs from the maintainer's point of view

When someone NMUs your package, this means they want to help you to keep it in good shape. This gives users fixed
packages faster. You can consider asking the NMUer to become a co-maintainer of the package. Receiving an NMU
on a package is not a bad thing; it just means that the package is interesting enough for other people to work on it.
To acknowledge an NMU, include its changes and changelog entry in your next maintainer upload. If you do not
acknowledge the NMU by including the NMU changelog entry in your changelog, the bugs will remain closed in the
BTS but will be listed as affecting your maintainer version of the package.
Note that if you ever need to revert a NMU that packages a new upstream version, it is recommended to use a fake
upstream version like CURRENT +reallyFORMER until one can upload the latest version again. More information
can be found in https://www.debian.org/doc/debian-policy/ch-controlfields.html#epochs-should-be-used-sparingly.

5.11.5 Source NMUs vs Binary-only NMUs (binNMUs)

The full name of an NMU is source NMU. There is also another type, namely the binary-only NMU, or binNMU. A
binNMU is also a package upload by someone other than the package's maintainer. However, it is a binary-only upload.
When a library (or other dependency) is updated, the packages using it may need to be rebuilt. Since no changes to the
source are needed, the same source package is used.
BinNMUs are usually triggered on the buildds by wanna-build. An entry is added to debian/changelog, explaining
why the upload was needed and increasing the version number as described in Recompilation or binary-only NMU.
This entry should not be included in the next upload.
Buildds upload packages for their architecture to the archive as binary-only uploads. Strictly speaking, these are binN-
MUs. However, they are not normally called NMU, and they don't add an entry to debian/changelog.

52 Chapter 5. Managing Packages

 Debian Developer’s Reference, Release 13.15

5.11.6 NMUs vs QA uploads

NMUs are uploads of packages by somebody other than their assigned maintainer. There is another type of upload
where the uploaded package is not yours: QA uploads. QA uploads are uploads of orphaned packages.
QA uploads are very much like normal maintainer uploads: they may fix anything, even minor issues; the version
numbering is normal, and there is no need to use a delayed upload. The difference is that you are not listed as the
Maintainer or Uploader for the package. Also, the changelog entry of a QA upload has a special first line:

* QA upload.

If you want to do an NMU, and it seems that the maintainer is not active, it is wise to check if the package is orphaned
(this information is displayed on the package's Package Tracking System page). When doing the first QA upload to
an orphaned package, the maintainer should be set to Debian QA Group <[email protected]>. Orphaned
packages which did not yet have a QA upload still have their old maintainer set. There is a list of them at https:
//qa.debian.org/orphaned.html.
Instead of doing a QA upload, you can also consider adopting the package by making yourself the maintainer. You
don't need permission from anybody to adopt an orphaned package; you can just set yourself as maintainer and upload
the new version (see Adopting a package).

5.11.7 NMUs vs team uploads

Sometimes you are fixing and/or updating a package because you are member of a packaging team (which uses a mailing
list as Maintainer or Uploader; see Collaborative maintenance) but you don't want to add yourself to Uploaders
because you do not plan to contribute regularly to this specific package. If it conforms with your team's policy, you
can perform a normal upload without being listed directly as Maintainer or Uploader. In that case, you should start
your changelog entry with the following line:

* Team upload.

5.12 Package Salvaging

Package salvaging is the process by which one attempts to save a package that, while not officially orphaned, appears
poorly maintained or completely unmaintained. This is a weaker and faster procedure than orphaning a package of-
ficially through the powers of the MIA team. Salvaging a package is not meant to replace MIA handling, and differs
in that it does not imply anything about the overall activity of a maintainer. Instead, it handles a package maintain-
ership transition for a single package only, leaving any other package or Debian membership or upload rights (when
applicable) untouched.
Note that the process is only intended for actively taking over maintainership. Do not start a package salvaging process
when you do not intend to maintain the package for a prolonged time. If you only want to fix certain things, but not
take over the package, you must use the NMU process, even if the package would be eligible for salvaging. The NMU
process is explained in Non-Maintainer Uploads (NMUs).
Another important thing to remember: It is not acceptable to hijack others' packages. If followed, this salvaging process
will help you to ensure that your endeavour is not a hijack but a (legal) salvaging procedure, and you can counter any
allegations of hijacking with a reference to this process. Thanks to this process, new contributors should no longer be
afraid to take over packages that have been neglected or entirely forgotten.
The process is split into two phases: In the first phase you determine whether the package in question is eligible for the
salvaging process. Only when the eligibility has been determined you may enter the second phase, the actual package
salvaging.

5.12. Package Salvaging 53

Debian Developer’s Reference, Release 13.15

For additional information, rationales and FAQs on package salvaging, please visit the Salvaging Packages page on the
Debian wiki.

5.12.1 When a package is eligible for package salvaging

A package becomes eligible for salvaging when it has been neglected by the current maintainer. To determine that a
package has really been neglected by the maintainer, the following indicators give a rough idea what to look for:
• NMUs, especially if there has been more than one NMU in a row.
• Bugs filed against the package do not have answers from the maintainer.
• Upstream has released several versions, but despite there being a bug entry asking for it, it has not been packaged.
• There are QA issues with the package.
You will have to use your judgement as to whether a given combination factors constitutes neglect; in case the maintainer
disagrees they have only to say so (see below). If you're not sure about your judgement or simply want to be on the safe
side, there is a more precise (and conservative) set of conditions in the Package Salvaging wiki page. These conditions
represent a current Debian consensus on salvaging criteria. In any case you should explain your reasons for thinking
the package is neglected when you file an Intent to Salvage bug later.

5.12.2 How to salvage a package

If and only if a package has been determined to be eligible for package salvaging, any prospective maintainer may start
the following package salvaging procedure.
1. Open a bug with the severity "important" against the package in question, expressing the intent to take over main-
tainership of the package. For this, the title of the bug should start with ITS: package-name3 . You may alterna-
tively offer to only take co-maintenance of the package. When you file the bug, you must inform all maintainers,
uploaders and if applicable the packaging team explicitly by adding them to X-Debbugs-CC. Additionally, if the
maintainer(s) seem(s) to be generally inactive, please inform the MIA team by adding [email protected] to
X-Debbugs-CC as well. As well as the explicit expression of the intent to salvage, please also take the time to
document your assessment of the eligibility in the bug report, for example by listing the criteria you've applied
and adding some data to make it easier for others to assess the situation.
2. In this step you need to wait in case any objections to the salvaging are raised; the maintainer, any current uploader
or any member of the associated packaging team of the package in question may object publicly in response to
the bug you've filed within 21 days, and this terminates the salvaging process.
The current maintainers may also agree to your intent to salvage by filing a (signed) public response to the the
bug. They might propose that you become a co-maintainer instead of the sole maintainer. On team maintained
packages, a member of the associated team can accept your salvaging proposal by sending out a signed agreement
notice to the ITS bug, alternatively inviting you to become a new co-maintainer of the package. The team may
require you to keep the package under the team's umbrella, but then may ask or invite you to join the team. In
any of these cases where you have received the OK to proceed, you can upload the new package immediately as
the new (co-)maintainer, without the need to utilise the DELAYED queue as described in the next step.
3. After the 21 days delay, if no answer has been sent to the bug from the maintainer, one of the uploaders or team,
you may upload the new release of the package into the DELAYED queue with a minimum delay of seven days.
You should close the salvage bug in the changelog and you must also send an nmudiff to the bug ensuring that
copies are sent to the maintainer and any uploaders (including teams) of the package by CC'ing them in the mail
to the BTS.
3 ITS is shorthand for "Intend to Salvage"

54 Chapter 5. Managing Packages

 Debian Developer’s Reference, Release 13.15

During the waiting time of the DELAYED queue, the maintainer can accept the salvaging, do an upload themselves
or (ask to) cancel the upload. The latter two of these will also stop the salvaging process, but the maintainer must
reply to the salvaging bug with more information about their action.

5.13 Collaborative maintenance

Collaborative maintenance is a term describing the sharing of Debian package maintenance duties by several people.
This collaboration is almost always a good idea, since it generally results in higher quality and faster bug fix turnaround
times. It is strongly recommended that packages with a priority of standard or which are part of the base set have
co-maintainers.
Generally there is a primary maintainer and one or more co-maintainers. The primary maintainer is the person whose
name is listed in the Maintainer field of the debian/control file. Co-maintainers are all the other maintainers,
usually listed in the Uploaders field of the debian/control file.
In its most basic form, the process of adding a new co-maintainer is quite easy:
• Set up the co-maintainer with access to the sources you build the package from. Generally this implies you are
using a network-capable version control system, such as Git. Salsa (see salsa.debian.org: Git repositories and
collaborative development platform) provides Git repositories, amongst other collaborative tools.
• Add the co-maintainer's correct maintainer name and address to the Uploaders field in the first paragraph of the
debian/control file.

Uploaders: John Buzz <[email protected]>, Adam Rex <[email protected]>

• Using the PTS (The Debian Package Tracker), the co-maintainers should subscribe themselves to the appropriate
source package.
Another form of collaborative maintenance is team maintenance, which is recommended if you maintain several pack-
ages with the same group of developers. In that case, the Maintainer and Uploaders field of each package must be
managed with care. It is recommended to choose between one of the two following schemes:
1. Put the team member mainly responsible for the package in the Maintainer field. In the Uploaders, put the
mailing list address, and the team members who care for the package.
2. Put the mailing list address in the Maintainer field. In the Uploaders field, put the team members who care for
the package. In this case, you must make sure the mailing list accepts bug reports without any human interaction
(like moderation for non-subscribers).
In any case, it is a bad idea to automatically put all team members in the Uploaders field. It clutters the Developer's
Package Overview listing (see Developer's packages overview) with packages one doesn't really care for, and creates a
false sense of good maintenance. For the same reason, team members do not need to add themselves to the Uploaders
field just because they are uploading the package once, they can do a “Team upload” (see NMUs vs team uploads).
Conversely, it is a bad idea to keep a package with only the mailing list address as a Maintainer and no Uploaders.

5.13. Collaborative maintenance 55

Debian Developer’s Reference, Release 13.15

5.14 The testing distribution

5.14.1 Basics

Packages are usually installed into the testing distribution after they have undergone some degree of testing in
unstable.
They must be in sync on all architectures and mustn't have dependencies that make them uninstallable; they also have
to have generally no known release-critical bugs at the time they're installed into testing. This way, testing should
always be close to being a release candidate. Please see below for details.

5.14.2 Updates from unstable

The scripts that update the testing distribution are run twice each day, right after the installation of the updated
packages; these scripts are called britney. They generate the Packages files for the testing distribution, but they
do so in an intelligent manner; they try to avoid any inconsistency and to use only non-buggy packages.
The inclusion of a package from unstable is conditional on the following:
• The package must have been available in unstable for a certain number of days, see Selecting the upload
urgency. Please note that the urgency is sticky, meaning that the highest urgency uploaded since the previous
testing transition is taken into account;
• It must not have new release-critical bugs (RC bugs affecting the version available in unstable, but not affecting
the version in testing);
• It must be available on all architectures on which it has previously been built in unstable. The dak ls utility
may be of interest to check that information;
• It must not break any dependency of a package which is already available in testing;
• The packages on which it depends must either be available in testing or they must be accepted into testing
at the same time (and they will be if they fulfill all the necessary criteria);
• The phase of the project. I.e. automatic transitions are turned off during the freeze of the testing distribution.
To find out whether a package is progressing into testing or not, see the testing script output on the web page of the
testing distribution, or use the program grep-excuses which is in the devscripts package. This utility can easily
be used in a crontab 5 to keep yourself informed of the progression of your packages into testing.
The update_excuses file does not always give the precise reason why the package is refused; you may have to find
it on your own by looking for what would break with the inclusion of the package. The testing web page gives some
more information about the usual problems which may be causing such troubles.
Sometimes, some packages never enter testing because the set of interrelationship is too complicated and cannot be
sorted out by the scripts. See below for details.
Some further dependency analysis is shown on https://release.debian.org/migration/ — but be warned: this page also
shows build dependencies that are not considered by britney.

56 Chapter 5. Managing Packages

 Debian Developer’s Reference, Release 13.15

5.14.2.1 Out-of-date

For the testing migration script, outdated means: There are different versions in unstable for the release architec-
tures (except for the architectures in outofsync_arches; outofsync_arches is a list of architectures that don't keep up (in
britney.py), but currently, it's empty). Outdated has nothing whatsoever to do with the architectures this package
has in testing.
Consider this example:

alpha arm
testing 1 -
unstable 1 2

The package is out of date on alpha in unstable, and will not go to testing. Removing the package would not help
at all; the package is still out of date on alpha, and will not propagate to testing.
However, if ftp-master removes a package in unstable (here on arm):

alpha arm hurd-i386

testing 1 1 -
unstable 2 - 1

In this case, the package is up to date on all release architectures in unstable (and the extra hurd-i386 doesn't matter,
as it's not a release architecture).
Sometimes, the question is raised if it is possible to allow packages in that are not yet built on all architectures: No.
Just plainly no. (Except if you maintain glibc or so.)

5.14.2.2 Removals from testing

Sometimes, a package is removed to allow another package in: This happens only to allow another package to go in
if it's ready in every other sense. Suppose e.g. that a cannot be installed with the new version of b; then a may be
removed to allow b in.
Of course, there is another reason to remove a package from testing: it's just too buggy (and having a single RC-bug
is enough to be in this state).
Furthermore, if a package has been removed from unstable, and no package in testing depends on it any more,
then it will automatically be removed.

5.14.2.3 Circular dependencies

A situation which is not handled very well by britney is if package a depends on the new version of package b, and vice
versa.
An example of this is:

testing unstable
a 1; depends: b=1 2; depends: b=2
b 1; depends: a=1 2; depends: a=2

5.14. The testing distribution 57

Debian Developer’s Reference, Release 13.15

Neither package a nor package b is considered for update.

Currently, this requires some manual hinting from the release team. Please contact them by sending mail to
[email protected] if this happens to one of your packages.

5.14.2.4 Influence of package in testing

Generally, there is nothing that the status of a package in testing means for transition of the next version from
unstable to testing, with two exceptions: If the RC-bugginess of the package goes down, it may go in even if it is
still RC-buggy. The second exception is if the version of the package in testing is out of sync on the different arches:
Then any arch might just upgrade to the version of the source package; however, this can happen only if the package
was previously forced through, the arch is in outofsync_arches, or there was no binary package of that arch present in
unstable at all during the testing migration.
In summary this means: The only influence that a package being in testing has on a new version of the same package
is that the new version might go in easier.

5.14.2.5 Details

If you are interested in details, this is how britney works:

The packages are looked at to determine whether they are valid candidates. This gives the update excuses. The most
common reasons why a package is not considered are too young, RC-bugginess, and out of date on some arches. For
this part of britney, the release managers have hammers of various sizes, called hints (see below), to force britney to
consider a package.
Now, the more complex part happens: Britney tries to update testing with the valid candidates. For that, britney
tries to add each valid candidate to the testing distribution. If the number of uninstallable packages in testing doesn't
increase, the package is accepted. From that point on, the accepted package is considered to be part of testing, such
that all subsequent installability tests include this package. Hints from the release team are processed before or after
this main run, depending on the exact type.
If you want to see more details, you can look it up on https://release.debian.org/britney/update_output/.
The hints are available via https://release.debian.org/britney/hints/, where you can find the description as well. With the
hints, the Debian Release team can block or unblock packages, ease or force packages into testing, remove packages
from testing, approve uploads to Direct updates to testing or override the urgency.

5.14.3 Direct updates to testing

The testing distribution is fed with packages from unstable according to the rules explained above. However,
in some cases, it is necessary to upload packages built only for testing. For that, you may want to upload to
testing-proposed-updates.
Keep in mind that packages uploaded there are not automatically processed; they have to go through the hands of the
release manager. So you'd better have a good reason to upload there. In order to know what a good reason is in the
release managers' eyes, you should read the instructions that they regularly give on debian-devel-announce@lists.
debian.org.
You should not upload to testing-proposed-updates when you can update your packages through unstable. If
you can't (for example because you have a newer development version in unstable), you may use this facility. Even
if a package is frozen, updates through unstable are possible, if the upload via unstable does not pull in any new
dependencies.
Version numbers are usually selected by appending +debXuY, where X is the major release number of Debian and Y
is a counter starting at 1. e.g. 1:2.4.3-4+deb12u1.

58 Chapter 5. Managing Packages

 Debian Developer’s Reference, Release 13.15

Please make sure you didn't miss any of these items in your upload:
• Make sure that your package really needs to go through testing-proposed-updates, and can't go through
unstable;
• Make sure that you included only the minimal amount of changes;
• Make sure that you included an appropriate explanation in the changelog;
• Make sure that you've written the testing Release code names (e.g. trixie) into your target distribution;
• Make sure that you've built and tested your package in testing, not in unstable;
• Make sure that your version number is higher than the version in testing and testing-proposed-updates,
and lower than in unstable;
• Ask for authorization for uploading from the release managers.
• After uploading and successful build on all platforms, contact the release team at debian-release@lists.
debian.org and ask them to approve your upload.

5.14.4 Frequently asked questions

5.14.4.1 What are release-critical bugs, and how do they get counted?

All bugs of some higher severities are by default considered release-critical; currently, these are critical, grave and
serious bugs.
Such bugs are presumed to have an impact on the chances that the package will be released with the stable release of
Debian: in general, if a package has open release-critical bugs filed on it, it won't get into testing, and consequently
won't be released in stable.
The unstable bug count comprises all release-critical bugs that are marked to apply to package/version combinations
available in unstable for a release architecture. The testing bug count is defined analogously.

5.14.4.2 How could installing a package into testing possibly break other packages?

The structure of the distribution archives is such that they can only contain one version of a package; a package is
defined by its name. So when the source package acmefoo is installed into testing, along with its binary packages
acme-foo-bin, acme-bar-bin, libacme-foo1 and libacme-foo-dev, the old version is removed.
However, the old version may have provided a binary package with an old soname of a library, such as libacme-foo0.
Removing the old acmefoo will remove libacme-foo0, which will break any packages that depend on it.
Evidently, this mainly affects packages that provide changing sets of binary packages in different versions (in turn,
mainly libraries). However, it will also affect packages upon which versioned dependencies have been declared of the
==, <=, or << varieties.
When the set of binary packages provided by a source package changes in this way, all the packages that depended
on the old binaries will have to be updated to depend on the new binaries instead. Because installing such a source
package into testing breaks all the packages that depended on it in testing, some care has to be taken now: all
the depending packages must be updated and ready to be installed themselves so that they won't be broken, and, once
everything is ready, manual intervention by the release manager or an assistant is normally required.
If you are having problems with complicated groups of packages like this, contact [email protected].
org or [email protected] for help.

5.14. The testing distribution 59

Debian Developer’s Reference, Release 13.15

5.15 The Stable backports archive

5.15.1 Basics

Once a package reaches the testing distribution, it is possible for anyone with upload rights in Debian (see below
about this) to build and upload a backport of that package to stable-backports, to allow easy installation of the
version from testing onto a system that is tracking the stable distribution.
One should not upload a version of a package to stable-backports until the matching version has already reached
the testing archive.

5.15.2 Exception to the testing-first rule

The only exception to the above rule, is when there's an important security fix that deserves a quick upload: in such a
case, there is no need to delay an upload of the security fix to the stable-backports archive. However, it is strongly
advised that the package is first fixed in unstable before uploading a fix to the stable-backports archive.

5.15.3 Who can maintain packages in the stable-backports archive?

It is not necessarily up to the original package maintainer to maintain the stable-backports version of the package.
Anyone can do it, and one doesn't even need approval from the original maintainer to do so. It is however good practice
to first get in touch with the original maintainer of the package before attempting to start the maintenance of a package in
stable-backports. The maintainer can, if they wish, decide to maintain the backport themselves, or help you doing
so. It is not uncommon, for example, to apply a patch to the unstable version of a package, to facilitate its backporting.

5.15.4 When can one start uploading to stable-backports?

The new stable-backports is created before the freeze of the next stable suite. However, it is not allowed to upload
there until the very end of the freeze cycle. The stable-backports archive is usually opened a few weeks before the
final release of the next stable suite, but it doesn't make sense to upload until the release has actually happened.

5.15.5 How long must a package be maintained when uploaded to stable-

backports?

The stable-backports archive is maintained for bugs and security issues during the whole life-cycle of the Debian
stable suite. Therefore, an upload to stable-backports, implies a willingness to maintain the backported package
for the duration of the stable suite, which can be expected to be about 3 years from its initial release.
The person uploading to backports is also supposed to maintain the backported packages for security during the lifetime
of stable.
It is to be noted that the stable-backports isn't part of the LTS or ELTS effort. The stable-backports FTP
masters will close the stable-backports repositories for uploads once stable reaches end-of-life (ie: when
stable becomes maintained by the LTS team only). Therefore there won't be any maintenance of packages from
stable-backports after the official end of life of the stable suite, as uploads will not be accepted.

60 Chapter 5. Managing Packages

 Debian Developer’s Reference, Release 13.15

5.15.6 How often shall one upload to stable-backports?

The packages in backports are supposed to follow the developments that are happening in Testing. Therefore, it is
expected that any significant update in testing should trigger an upload into stable-backports, until the new
stable is released. However, please do not backport minor version changes without user visible changes or bugfixes.

5.15.7 How can one learn more about backporting?

You can learn more about how to contribute directly on the backport web site.
It is also recommended to read the Frequently Asked Questions (FAQ).

5.15. The Stable backports archive 61

Debian Developer’s Reference, Release 13.15

62 Chapter 5. Managing Packages

 CHAPTER

SIX

BEST PACKAGING PRACTICES

Debian's quality is largely due to the Debian Policy, which defines explicit baseline requirements that all Debian pack-
ages must fulfill. Yet there is also a shared history of experience which goes beyond the Debian Policy, an accumulation
of years of experience in packaging. Many very talented people have created great tools, tools which help you, the De-
bian maintainer, create and maintain excellent packages.
This chapter provides some best practices for Debian developers. All recommendations are merely that, and are not
requirements or policy. These are just some subjective hints, advice and pointers collected from Debian developers.
Feel free to pick and choose whatever works best for you.

6.1 Best practices for debian/rules

The following recommendations apply to the debian/rules file. Since debian/rules controls the build process and
selects the files that go into the package (directly or indirectly), it's usually the file maintainers spend the most time on.

6.1.1 Helper scripts

The rationale for using helper scripts in debian/rules is that they let maintainers use and share common logic among
many packages. Take for instance the question of installing menu entries: you need to put the file into /usr/share/
menu (or /usr/lib/menu for executable binary menufiles, if this is needed), and add commands to the maintainer
scripts to register and unregister the menu entries. Since this is a very common thing for packages to do, why should
each maintainer rewrite all this on their own, sometimes with bugs? Also, supposing the menu directory changed, every
package would have to be changed.
Helper scripts take care of these issues. Assuming you comply with the conventions expected by the helper script, the
helper takes care of all the details. Changes in policy can be made in the helper script; then packages just need to be
rebuilt with the new version of the helper and no other changes.
Overview of Debian Maintainer Tools contains a couple of different helpers. The most common and best (in our
opinion) helper system is debhelper. Previous helper systems, such as debmake, were monolithic: you couldn't
pick and choose which part of the helper you found useful, but had to use the helper to do everything. debhelper,
however, is a number of separate little dh_* programs. For instance, dh_installman installs and compresses man
pages, dh_installmenu installs menu files, and so on. Thus, it offers enough flexibility to be able to use the little
helper scripts, where useful, in conjunction with hand-crafted commands in debian/rules.
You can get started with debhelper by reading debhelper 1, and looking at the examples that come with the pack-
age. dh_make, from the dh-make package (see dh-make), can be used to convert a vanilla source package to a
debhelperized package. This shortcut, though, should not convince you that you do not need to bother understanding
the individual dh_* helpers. If you are going to use a helper, you do need to take the time to learn to use that helper, to
learn its expectations and behavior.

63
Debian Developer’s Reference, Release 13.15

6.1.2 Separating your patches into multiple files

Big, complex packages may have many bugs that you need to deal with. If you correct a number of bugs directly in
the source, and you're not careful, it can get hard to differentiate the various patches that you applied. It can get quite
messy when you have to update the package to a new upstream version which integrates some of the fixes (but not all).
You can't take the total set of diffs (e.g., from .diff.gz) and work out which patch sets to back out as a unit as bugs
are fixed upstream.
Fortunately, with the source format “3.0 (quilt)” it is now possible to keep patches separate without having to modify
debian/rules to set up a patch system. Patches are stored in debian/patches/ and when the source package is
unpacked patches listed in debian/patches/series are automatically applied. As the name implies, patches can be
managed with quilt.
When using the older source “1.0”, it's also possible to separate patches but a dedicated patch system must be used:
the patch files are shipped within the Debian patch file (.diff.gz), usually within the debian/ directory. The only
difference is that they aren't applied immediately by dpkg-source, but by the build rule of debian/rules, through a
dependency on the patch rule. Conversely, they are reverted in the clean rule, through a dependency on the unpatch
rule.
quilt is the recommended tool for this. It does all of the above, and also allows one to manage patch series. See the
quilt package for more information.

6.1.3 Multiple binary packages

A single source package will often build several binary packages, either to provide several flavors of the same software
(e.g., the vim source package) or to make several small packages instead of a big one (e.g., so the user can install only
the subset needed, and thus save some disk space, see for example the libxml2 source package).
The second case can be easily managed in debian/rules. You just need to move the appropriate files from the build
directory into the package's temporary trees. You can do this using install or dh_install from debhelper. Be
sure to check the different permutations of the various packages, ensuring that you have the inter-package dependencies
set right in debian/control.
The first case is a bit more difficult since it involves multiple recompiles of the same software but with different con-
figuration options. The vim source package is an example of how to manage this using a hand-crafted debian/rules
file.

6.2 Best practices for debian/control

The following practices are relevant to the debian/control file. They supplement the Policy on package descriptions.
The description of the package, as defined by the corresponding field in the control file, contains both the package
synopsis and the long description for the package. General guidelines for package descriptions describes common
guidelines for both parts of the package description. Following that, The package synopsis, or short description provides
guidelines specific to the synopsis, and The long description contains guidelines specific to the description.

64 Chapter 6. Best Packaging Practices

 Debian Developer’s Reference, Release 13.15

6.2.1 General guidelines for package descriptions

The package description should be written for the average likely user, the average person who will use and benefit from
the package. For instance, development packages are for developers, and can be technical in their language. More
general-purpose applications, such as editors, should be written for a less technical user.
Our review of package descriptions lead us to conclude that most package descriptions are technical, that is, are not
written to make sense for non-technical users. Unless your package really is only for technical users, this is a problem.
How do you write for non-technical users? Avoid jargon. Avoid referring to other applications or frameworks that the
user might not be familiar with — GNOME or KDE is fine, since users are probably familiar with these terms, but
GTK is probably not. Try not to assume any knowledge at all. If you must use technical terms, introduce them.
Be objective. Package descriptions are not the place for advocating your package, no matter how much you love it.
Remember that the reader may not care about the same things you care about.
References to the names of any other software packages, protocol names, standards, or specifications should use their
canonical forms, if one exists. For example, use X Window System, X11, or X; not X Windows, X-Windows, or X
Window. Use GTK, not GTK+ or gtk. Use GNOME, not Gnome. Use PostScript, not Postscript or postscript.
If you are having problems writing your description, you may wish to send it along to debian-l10n-english@lists.
debian.org and request feedback.

6.2.2 The package synopsis, or short description

Policy says the synopsis line (the short description) must be concise, not repeating the package name, but also infor-
mative.
The synopsis functions as a phrase describing the package, not a complete sentence, so sentential punctuation is inap-
propriate: it does not need extra capital letters or a final period (full stop). It should also omit any initial indefinite or
definite article — "a", "an", or "the". Thus for instance:

Package: libeg0
Description: exemplification support library

Technically this is a noun phrase minus articles, as opposed to a verb phrase. A good heuristic is that it should be
possible to substitute the package name and synopsis into this formula:
The package name provides {a,an,the,some} synopsis.
Sets of related packages may use an alternative scheme that divides the synopsis into two parts, the first a description
of the whole suite and the second a summary of the package's role within it:

Package: eg-tools
Description: simple exemplification system (utilities)

Package: eg-doc
Description: simple exemplification system - documentation

These synopses follow a modified formula. Where a package "name" has a synopsis "suite (role)" or "suite - role", the
elements should be phrased so that they fit into the formula:
The package name provides {a,an,the} role for the suite.

6.2. Best practices for debian/control 65

Debian Developer’s Reference, Release 13.15

6.2.3 The long description

The long description is the primary information available to the user about a package before they install it. It should
provide all the information needed to let the user decide whether to install the package. Assume that the user has already
read the package synopsis.
The long description should consist of full and complete sentences.
The first paragraph of the long description should answer the following questions: what does the package do? what task
does it help the user accomplish? It is important to describe this in a non-technical way, unless of course the audience
for the package is necessarily technical.
Long descriptions of related packages, for example built from the same source, can share paragraphs in order to in-
crease consistency and reduce the workload for translators, but you need at least one separate paragraph describing the
package's specific role.
The following paragraphs should answer the following questions: Why do I as a user need this package? What other
features does the package have? What outstanding features and deficiencies are there compared to other packages (e.g.,
if you need X, use Y instead)? Is this package related to other packages in some way that is not handled by the package
manager (e.g., is this the client for the foo server)?
Be careful to avoid spelling and grammar mistakes. Ensure that you spell-check it. Both ispell and aspell have
special modes for checking debian/control files:

ispell -d american -g debian/control

aspell -d en -D -c debian/control

Users usually expect these questions to be answered in the package description:

• What does the package do? If it is an add-on to another package, then the short description of the package we
are an add-on to should be put in here.
• Why should I want this package? This is related to the above, but not the same (this is a mail user agent; this is
cool, fast, interfaces with PGP and LDAP and IMAP, has features X, Y, and Z).
• If this package should not be installed directly, but is pulled in by another package, this should be mentioned.
• If the package is experimental, or there are other reasons it should not be used, if there are other packages that
should be used instead, it should be here as well.
• How is this package different from the competition? Is it a better implementation? more features? different
features? Why should I choose this package?

6.2.4 Upstream home page

We recommend that you add the URL for the package's home page in the Homepage field of the Source section in
debian/control. Adding this information in the package description itself is considered deprecated.

66 Chapter 6. Best Packaging Practices

 Debian Developer’s Reference, Release 13.15

6.2.5 Version Control System location

There are additional fields for the location of the Version Control System in debian/control.

6.2.5.1 Vcs-Browser

Value of this field should be a https:// URL pointing to a web-browsable copy of the Version Control System
repository used to maintain the given package, if available.
The information is meant to be useful for the final user, willing to browse the latest work done on the package (e.g.
when looking for the patch fixing a bug tagged as pending in the bug tracking system).

6.2.5.2 Vcs-*

Value of this field should be a string identifying unequivocally the location of the Version Control System repository
used to maintain the given package, if available. * identifies the Version Control System; currently the following
systems are supported by the package tracking system: arch, bzr (Bazaar), cvs, darcs, git, hg (Mercurial), mtn
(Monotone), svn (Subversion).
The information is meant to be useful for a user knowledgeable in the given Version Control System and willing to
build the current version of a package from the VCS sources. Other uses of this information might include automatic
building of the latest VCS version of the given package. To this end the location pointed to by the field should better
be version agnostic and point to the main branch (for VCSs supporting such a concept). Also, the location pointed to
should be accessible to the final user; fulfilling this requirement might imply pointing to an anonymous access of the
repository instead of pointing to an SSH-accessible version of the same.
In the following example, an instance of the field for a Git repository of the vim package is shown. Note how the URL
is in the https:// scheme (instead of ssh://). The use of the Vcs-Browser and Homepage fields described above
is also shown.

Source: vim
<snip>
Vcs-Git: https://salsa.debian.org/vim-team/vim.git
Vcs-Browser: https://salsa.debian.org/vim-team/vim
Homepage: https://www.vim.org

Maintaining the packaging in a version control system, and setting a Vcs-* header is good practice and makes it easier
for others to contribute changes.
Almost all packages in Debian that use a version control system use Git; if you create a new package, using Git is a
good idea simply because it's the system that contributors will be familiar with.
DEP-14 defines a common layout for Debian packages.

6.3 Best practices for debian/changelog

The following practices supplement the Policy on changelog files.

6.3. Best practices for debian/changelog 67

Debian Developer’s Reference, Release 13.15

6.3.1 Writing useful changelog entries

The changelog entry for a package revision documents changes in that revision, and only them. Concentrate on de-
scribing significant and user-visible changes that were made since the last version.
Focus on what was changed — who, how and when are usually less important. Having said that, remember to politely
attribute people who have provided notable help in making the package (e.g., those who have sent in patches).
There's no need to elaborate the trivial and obvious changes. You can also aggregate several changes in one entry. On
the other hand, don't be overly terse if you have undertaken a major change. Be especially clear if there are changes
that affect the behaviour of the program. For further explanations, use the README.Debian file.
Use common English so that the majority of readers can comprehend it. Avoid abbreviations, tech-speak and jar-
gon when explaining changes that close bugs, especially for bugs filed by users that did not strike you as particularly
technically savvy. Be polite, don't swear.
It is sometimes desirable to prefix changelog entries with the names of the files that were changed. However, there's no
need to explicitly list each and every last one of the changed files, especially if the change was small or repetitive. You
may use wildcards.
When referring to bugs, don't assume anything. Say what the problem was, how it was fixed, and append the closes:
#nnnnn string. See When bugs are closed by new uploads for more information.

6.3.2 Selecting the upload urgency

The release team have indicated that they expect most uploads to unstable to use urgency=medium. That is, you
should choose urgency=medium unless there is some particular reason for the upload to migrate to testing more
quickly or slowly (see also Updates from unstable). For example, you might select urgency=low if the changes since
the last upload are large and might be disruptive in unanticipated ways.
The delays are currently 2, 5 or 10 days, depending on the urgency (high, medium or low). The actual numbers are
actually controled by the britney configuration which also includes accelerated migrations when Autopkgtest passes.

6.3.3 Common misconceptions about changelog entries

The changelog entries should not document generic packaging issues (Hey, if you're looking for foo.conf, it's in
/etc/blah/.), since administrators and users are supposed to be at least remotely acquainted with how such things are
generally arranged on Debian systems. Do, however, mention if you change the location of a configuration file.
The only bugs closed with a changelog entry should be those that are actually fixed in the same package revision.
Closing unrelated bugs in the changelog is bad practice. See When bugs are closed by new uploads.
The changelog entries should not be used for random discussion with bug reporters (I don't see segfaults when starting
foo with option bar; send in more info), general statements on life, the universe and everything (sorry this upload took
me so long, but I caught the flu), or pleas for help (the bug list on this package is huge, please lend me a hand). Such
things usually won't be noticed by their target audience, but may annoy people who wish to read information about
actual changes in the package. See Responding to bugs for more information on how to use the bug tracking system.
It is an old tradition to acknowledge bugs fixed in non-maintainer uploads in the first changelog entry of the proper
maintainer upload. As we have version tracking now, it is enough to keep the NMUed changelog entries and just
mention this fact in your own changelog entry.

68 Chapter 6. Best Packaging Practices

 Debian Developer’s Reference, Release 13.15

6.3.4 Common errors in changelog entries

The following examples demonstrate some common errors or examples of bad style in changelog entries.

* Fixed all outstanding bugs.

This doesn't tell readers anything too useful, obviously.

* Applied patch from Jane Random.

What was the patch about?

* Late night install target overhaul.

Overhaul which accomplished what? Is the mention of late night supposed to remind us that we shouldn't trust that
code?

* Fix vsync fw glitch w/ ancient CRTs.

Too many acronyms (what does "fw" mean, "firmware"?), and it's not overly clear what the glitch was actually about,
or how it was fixed.

* This is not a bug, closes: #nnnnnn.

First of all, there's absolutely no need to upload the package to convey this information; instead, use the bug tracking
system. Secondly, there's no explanation as to why the report is not a bug.

* Has been fixed for ages, but I forgot to close; closes: #54321.

If for some reason you didn't mention the bug number in a previous changelog entry, there's no problem, just close the
bug normally in the BTS. There's no need to touch the changelog file, presuming the description of the fix is already in
(this applies to the fixes by the upstream authors/maintainers as well; you don't have to track bugs that they fixed ages
ago in your changelog).

* Closes: #12345, #12346, #15432

Where's the description? If you can't think of a descriptive message, start by inserting the title of each different bug.

6.3.5 Supplementing changelogs with NEWS.Debian files

Important news about changes in a package can also be put in NEWS.Debian files. The news will be displayed by tools
like apt-listchanges, before all the rest of the changelogs. This is the preferred means to let the user know about
significant changes in a package. It is better than using debconf notes since it is less annoying and the user can go
back and refer to the NEWS.Debian file after the install. And it's better than listing major changes in README.Debian,
since the user can easily miss such notes.
The file format is the same as a debian changelog file, but leave off the asterisks and describe each news item with a
full paragraph when necessary rather than the more concise summaries that would go in a changelog. It's a good idea
to run your file through dpkg-parsechangelog to check its formatting as it will not be automatically checked during
build as the changelog is. Here is an example of a real NEWS.Debian file:

cron (3.0pl1-74) unstable; urgency=low

The checksecurity script is no longer included with the cron package:

(continues on next page)

6.3. Best practices for debian/changelog 69

Debian Developer’s Reference, Release 13.15

(continued from previous page)

it now has its own package, checksecurity. If you liked the
functionality provided with that script, please install the new
package.

-- Steve Greenland <[email protected]> Sat, 6 Sep 2003 17:15:03 -0500

The NEWS.Debian file is installed as /usr/share/doc/package/NEWS.Debian.gz. It is compressed, and always has

that name even in Debian native packages. If you use debhelper, dh_installchangelogs will install debian/NEWS
files for you.
Unlike changelog files, you need not update NEWS.Debian files with every release. Only update them if you have
something particularly newsworthy that user should know about. If you have no news at all, there's no need to ship a
NEWS.Debian file in your package. No news is good news!

6.4 Best practices around security

A set of suggestions and links to other reference documents around security aspects for packaging can be found at the
Developer's Best Practices for OS Security chapter inside the Securing Debian Manual.

6.5 Best practices for maintainer scripts

Maintainer scripts include the files debian/postinst, debian/preinst, debian/prerm and debian/postrm.
These scripts take care of any package installation or deinstallation setup that isn't handled merely by the creation
or removal of files and directories. The following instructions supplement the Debian Policy.
Maintainer scripts must be idempotent. That means that you need to make sure nothing bad will happen if the script is
called twice where it would usually be called once.
Standard input and output may be redirected (e.g. into pipes) for logging purposes, so don't rely on them being a tty.
All prompting or interactive configuration should be kept to a minimum. When it is necessary, you should use the
debconf package for the interface. Remember that prompting in any case can only be in the configure stage of the
postinst script.
Keep the maintainer scripts as simple as possible. We suggest you use pure POSIX shell scripts. Remember, if you do
need any bash features, the maintainer script must have a bash shebang line. POSIX shell or Bash are preferred to Perl,
since they enable debhelper to easily add bits to the scripts.
If you change your maintainer scripts, be sure to test package removal, double installation, and purging. Be sure that
a purged package is completely gone, that is, it must remove any files created, directly or indirectly, in any maintainer
script.
If you need to check for the existence of a command, you should use something like

if command -v install-docs > /dev/null; then ...

You can use this function to search $PATH for a command name, passed as an argument. It returns true (zero) if the
command was found, and false if not. This is really the best way, since command -v is a shell-builtin for many shells
and is defined in POSIX.
Using which is an acceptable alternative, since it is from the required debianutils package.

70 Chapter 6. Best Packaging Practices

 Debian Developer’s Reference, Release 13.15

6.6 Configuration management with debconf

Debconf is a configuration management system that can be used by all the various packaging scripts (postinst
mainly) to request feedback from the user concerning how to configure the package. Direct user interactions must now
be avoided in favor of debconf interaction. This will enable non-interactive installations in the future.
Debconf is a great tool but it is often poorly used. Many common mistakes are listed in the debconf-devel 7 man page.
It is something that you must read if you decide to use debconf. Also, we document some best practices here.
These guidelines include some writing style and typography recommendations, general considerations about debconf
usage as well as more specific recommendations for some parts of the distribution (the installation system for instance).

6.6.1 Do not abuse debconf

Since debconf appeared in Debian, it has been widely abused and several criticisms received by the Debian distribution
come from debconf abuse with the need of answering a wide bunch of questions before getting any little thing installed.
Keep usage notes to where they belong: the NEWS.Debian, or README.Debian file. Only use notes for important
notes that may directly affect the package usability. Remember that notes will always block the install until confirmed
or bother the user by email.
Carefully choose the questions' priorities in maintainer scripts. See debconf-devel 7 for details about priorities. Most
questions should use medium and low priorities.

6.6.2 General recommendations for authors and translators

6.6.2.1 Write correct English

Most Debian package maintainers are not native English speakers. So, writing properly phrased templates may not be
easy for them.
Please use (and abuse) [email protected] mailing list. Have your templates proofread.
Badly written templates give a poor image of your package, of your work... or even of Debian itself.
Avoid technical jargon as much as possible. If some terms sound common to you, they may be impossible to understand
for others. If you cannot avoid them, try to explain them (use the extended description). When doing so, try to balance
between verbosity and simplicity.

6.6.2.2 Be kind to translators

Debconf templates may be translated. Debconf, along with its sister package po-debconf, offers a simple framework
for getting templates translated by translation teams or even individuals.
Please use gettext-based templates. Install po-debconf on your development system and read its documentation (man
po-debconf is a good start).
Avoid changing templates too often. Changing template text induces more work for translators, which will get their
translation fuzzied. A fuzzy translation is a string for which the original changed since it was translated, therefore
requiring some update by a translator to be usable. When changes are small enough, the original translation is kept in
PO files but marked as fuzzy.
If you plan to do changes to your original templates, please use the notification system provided with the po-debconf
package, namely the podebconf-report-po, to contact translators. Most active translators are very responsive and

6.6. Configuration management with debconf 71

Debian Developer’s Reference, Release 13.15

getting their work included along with your modified templates will save you additional uploads. If you use gettext-
based templates, the translator's name and e-mail addresses are mentioned in the PO files headers and will be used by
podebconf-report-po.
A recommended use of that utility is:

cd debian/po && podebconf-report-po --call --languageteam --withtranslators --deadline=

˓→"+10 days"

This command will first synchronize the PO and POT files in debian/po with the template files listed in debian/po/
POTFILES.in. Then, it will send a call for new translations, in the [email protected] mailing list.
Finally, it will also send a call for translation updates to the language team (mentioned in the Language-Team field of
each PO file) as well as the last translator (mentioned in Last-translator).
Giving a deadline to translators is always appreciated, so that they can organize their work. Please remember that
some translation teams have a formalized translate/review process and a delay lower than 10 days is considered as
unreasonable. A shorter delay puts too much pressure on translation teams and should be kept for very minor changes.
If in doubt, you may also contact the translation team for a given language ([email protected]), or
the [email protected] mailing list.

6.6.2.3 Unfuzzy complete translations when correcting typos and spelling

When the text of a debconf template is corrected and you are sure that the change does not affect translations, please
be kind to translators and unfuzzy their translations.
If you don't do so, the whole template will not be translated as long as a translator will send you an update.
To unfuzzy translations, you can use msguntypot (part of the po4a package).
1. Regenerate the POT and PO files.

debconf-updatepo

2. Make a copy of the POT file.

cp templates.pot templates.pot.orig

3. Make a copy of all the PO files.

mkdir po_fridge; cp *.po po_fridge

4. Change the debconf template files to fix the typos.

5. Regenerate the POT and PO files (again).

debconf-updatepo

At this point, the typo fix fuzzied all the translations, and this unfortunate change is the only one between the PO
files of your main directory and the one from the fridge. Here is how to solve this.
6. Discard fuzzy translation, restore the ones from the fridge.

cp po_fridge/*.po .

7. Manually merge the PO files with the new POT file, but taking the useless fuzzy into account.

msguntypot -o templates.pot.orig -n templates.pot *.po

72 Chapter 6. Best Packaging Practices

 Debian Developer’s Reference, Release 13.15

8. Clean up.

rm -rf templates.pot.orig po_fridge

6.6.2.4 Do not make assumptions about interfaces

Templates text should not make reference to widgets belonging to some debconf interfaces. Sentences like If you answer
Yes... have no meaning for users of graphical interfaces that use checkboxes for boolean questions.
String templates should also avoid mentioning the default values in their description. First, because this is redundant
with the values seen by the users. Also, because these default values may be different from the maintainer choices (for
instance, when the debconf database was preseeded).
More generally speaking, try to avoid referring to user actions. Just give facts.

6.6.2.5 Do not use first person

You should avoid the use of first person (I will do this... or We recommend...). The computer is not a person and the
Debconf templates do not speak for the Debian developers. You should use neutral construction. Those of you who
already wrote scientific publications, just write your templates like you would write a scientific paper. However, try
using the active voice if still possible, like Enable this if ... instead of This can be enabled if....

6.6.2.6 Be gender neutral

As a way of showing our commitment to our diversity statement, please use gender-neutral constructions in your writing.
This means avoiding pronouns like he/she when referring to a role (like "maintainer") whose gender is unknown.
Instead, you should use the plural form (singular they).

6.6.3 Templates fields definition

This part gives some information which is mostly taken from the debconf-devel 7 manual page.

6.6.3.1 Type

string

Results in a free-form input field that the user can type any string into.

password

Prompts the user for a password. Use this with caution; be aware that the password the user enters will be written to
debconf's database. You should probably clean that value out of the database as soon as is possible.

6.6. Configuration management with debconf 73

Debian Developer’s Reference, Release 13.15

boolean

A true/false choice. Remember: true/false, not yes/no...

select

A choice between one of a number of values. The choices must be specified in a field named 'Choices'. Separate the
possible values with commas and spaces, like this: Choices: yes, no, maybe.
If choices are translatable strings, the 'Choices' field may be marked as translatable by using __Choices. The double
underscore will split out each choice in a separate string.
The po-debconf system also offers interesting possibilities to only mark some choices as translatable. Example:

Template: foo/bar
Type: Select
#flag:translate:3
__Choices: PAL, SECAM, Other
_Description: TV standard:
Please choose the TV standard used in your country.

In that example, only the 'Other' string is translatable while others are acronyms that should not be translated. The
above allows only 'Other' to be included in PO and POT files.
The debconf templates flag system offers many such possibilities. The po-debconf 7 manual page lists all these possi-
bilities.

multiselect

Like the select data type, except the user can choose any number of items from the choices list (or chose none of them).

note

Rather than being a question per se, this datatype indicates a note that can be displayed to the user. It should be used
only for important notes that the user really should see, since debconf will go to great pains to make sure the user sees
it; halting the install for them to press a key, and even mailing the note to them in some cases.

text

This type is now considered obsolete: don't use it.

74 Chapter 6. Best Packaging Practices

 Debian Developer’s Reference, Release 13.15

error

This type is designed to handle error messages. It is mostly similar to the note type. Front ends may present it differently
(for instance, the dialog front end of cdebconf draws a red screen instead of the usual blue one).
It is recommended to use this type for any message that needs user attention for a correction of any kind.

6.6.3.2 Description: short and extended description

Template descriptions have two parts: short and extended. The short description is in the Description: line of the
template.
The short description should be kept short (50 characters or so) so that it may be accommodated by most debconf
interfaces. Keeping it short also helps translators, as usually translations tend to end up being longer than the original.
The short description should be able to stand on its own. Some interfaces do not show the long description by default,
or only if the user explicitly asks for it or even do not show it at all. Avoid things like: "What do you want to do?"
The short description does not necessarily have to be a full sentence. This is part of the keep it short and efficient
recommendation.
The extended description should not repeat the short description word for word. If you can't think up a long description,
then first, think some more. Post to debian-devel. Ask for help. Take a writing class! That extended description is
important. If after all that you still can't come up with anything, leave it blank.
The extended description should use complete sentences. Paragraphs should be kept short for improved readability.
Do not mix two ideas in the same paragraph but rather use another paragraph.
Don't be too verbose. User tend to ignore too long screens. 20 lines are by experience a border you shouldn't cross,
because that means that in the classical dialog interface, people will need to scroll, and lot of people just don't do that.
The extended description should never include a question.
For specific rules depending on templates type (string, boolean, etc.), please read below.

6.6.3.3 Choices

This field should be used for select and multiselect types. It contains the possible choices that will be presented to
users. These choices should be separated by commas.

6.6.3.4 Default

This field is optional. It contains the default answer for string, select and multiselect templates. For multiselect tem-
plates, it may contain a comma-separated list of choices.

6.6.4 Template fields specific style guide

6.6.4.1 Type field

No specific indication except: use the appropriate type by referring to the previous section.

6.6. Configuration management with debconf 75

Debian Developer’s Reference, Release 13.15

6.6.4.2 Description field

Below are specific instructions for properly writing the Description (short and extended) depending on the template
type.

String/password templates

• The short description is a prompt and not a title. Avoid question style prompts (IP Address?) in favour of opened
prompts (IP address:). The use of colons is recommended.
• The extended description is a complement to the short description. In the extended part, explain what is being
asked, rather than ask the same question again using longer words. Use complete sentences. Terse writing style
is strongly discouraged.

Boolean templates

• The short description should be phrased in the form of a question, which should be kept short and should generally
end with a question mark. Terse writing style is permitted and even encouraged if the question is rather long
(remember that translations are often longer than original versions).
• Again, please avoid referring to specific interface widgets. A common mistake for such templates is if you answer
Yes-type constructions.

Select/Multiselect

• The short description is a prompt and not a title. Do not use useless "Please choose..." constructions. Users are
clever enough to figure out they have to choose something... :)
• The extended description will complete the short description. It may refer to the available choices. It may also
mention that the user may choose more than one of the available choices, if the template is a multiselect one
(although the interface often makes this clear).

Notes

• The short description should be considered to be a title.

• The extended description is what will be displayed as a more detailed explanation of the note. Phrases, no terse
writing style.
• Do not abuse debconf. Notes are the most common way to abuse debconf. As written in the debconf-devel
manual page: it's best to use them only for warning about very serious problems. The NEWS.Debian or README.
Debian files are the appropriate location for a lot of notes. If, by reading this, you consider converting your Note
type templates to entries in NEWS.Debian or README.Debian, please consider keeping existing translations for
the future.

76 Chapter 6. Best Packaging Practices

 Debian Developer’s Reference, Release 13.15

6.6.4.3 Choices field

If the Choices are likely to change often, please consider using the __Choices trick. This will split each individual
choice into a single string, which will considerably help translators for doing their work.

6.6.4.4 Default field

If the default value for a select template is likely to vary depending on the user language (for instance, if the choice is
a language choice), please use the _Default trick, documented in po-debconf 7.
This special field allows translators to put the most appropriate choice according to their own language. It will become
the default choice when their language is used while your own mentioned Default Choice will be used when using
English.
Do not use an empty default field. If you don't want to use default values, do not use Default at all.
If you use po-debconf (and you should; see Be kind to translators), consider making this field translatable, if you think
it may be translated.
Example, taken from the geneweb package templates:

Template: geneweb/lang
Type: select
__Choices: Afrikaans (af), Bulgarian (bg), Catalan (ca), Chinese (zh), Czech (cs),␣
˓→Danish (da), Dutch (nl), English (en), Esperanto (eo), Estonian (et), Finnish (fi),␣

˓→French (fr), German (de), Hebrew (he), Icelandic (is), Italian (it), Latvian (lv),␣

˓→Norwegian (no), Polish (pl), Portuguese (pt), Romanian (ro), Russian (ru), Spanish␣

˓→(es), Swedish (sv)

# This is the default choice. Translators may put their own language here
# instead of the default.
# WARNING : you MUST use the ENGLISH NAME of your language
# For instance, the French translator will need to put French (fr) here.
_Default: English[ translators, please see comment in PO files]
_Description: Geneweb default language:

Note the use of brackets, which allow internal comments in debconf fields. Also note the use of comments, which will
show up in files the translators will work with.
The comments are needed as the _Default trick is a bit confusing: the translators may put in their own choice.

6.7 Internationalization

This section contains global information for developers to make translators' lives easier. More information for transla-
tors and developers interested in internationalization are available in the Internationalisation and localisation in Debian
documentation.

6.7. Internationalization 77
Debian Developer’s Reference, Release 13.15

6.7.1 Handling debconf translations

Like porters, translators have a difficult task. They work on many packages and must collaborate with many different
maintainers. Moreover, most of the time, they are not native English speakers, so you may need to be particularly
patient with them.
The goal of debconf was to make package configuration easier for maintainers and for users. Originally, translation of
debconf templates was handled with debconf-mergetemplate. However, that technique is now deprecated; the best
way to accomplish debconf internationalization is by using the po-debconf package. This method is easier both for
maintainer and translators; transition scripts are provided.
Using po-debconf, the translation is stored in .po files (drawing from gettext translation techniques). Special
template files contain the original messages and mark which fields are translatable. When you change the value of a
translatable field, by calling debconf-updatepo, the translation is marked as needing attention from the translators.
Then, at build time, the dh_installdebconf program takes care of all the needed magic to add the template along
with the up-to-date translations into the binary packages. Refer to the po-debconf 7 manual page for details.

6.7.2 Internationalized documentation

Internationalizing documentation is crucial for users, but a lot of labor. There's no way to eliminate all that work, but
you can make things easier for translators.
If you maintain documentation of any size, it is easier for translators if they have access to a source control system.
That lets translators see the differences between two versions of the documentation, so, for instance, they can see
what needs to be retranslated. It is recommended that the translated documentation maintain a note about what source
control revision the translation is based on. An interesting system is provided by doc-check in the debian-installer
package, which shows an overview of the translation status for any given language, using structured comments for the
current revision of the file to be translated and, for a translated file, the revision of the original file the translation is
based on. You might wish to adapt and provide that in your VCS area.
If you maintain XML or SGML documentation, we suggest that you isolate any language-independent information and
define those as entities in a separate file that is included by all the different translations. This makes it much easier, for
instance, to keep URLs up to date across multiple files.
Some tools (e.g. po4a, poxml, or the translate-toolkit) are specialized in extracting the translatable material
from different formats. They produce PO files, a format quite common to translators, which permits seeing what needs
to be re-translated when the translated document is updated.

6.8 Common packaging situations

6.8.1 Packages using autoconf/automake

Keeping autoconf's config.sub and config.guess files up to date is critical for porters, especially on more volatile
architectures. Some very good packaging practices for any package using autoconf and/or automake have been
synthesized in /usr/share/doc/autotools-dev/README.Debian.gz from the autotools-dev package. You're
strongly encouraged to read this file and to follow the given recommendations.

78 Chapter 6. Best Packaging Practices

 Debian Developer’s Reference, Release 13.15

6.8.2 Libraries

Libraries are always difficult to package for various reasons. The policy imposes many constraints to ease their main-
tenance and to make sure upgrades are as simple as possible when a new upstream version comes out. Breakage in a
library can result in dozens of dependent packages breaking.
Good practices for library packaging have been grouped in the library packaging guide.

6.8.3 Documentation

Be sure to follow the Policy on documentation.

If your package contains documentation built from XML or SGML, we recommend you not ship the XML or SGML
source in the binary package(s). If users want the source of the documentation, they should retrieve the source package.
Policy specifies that documentation should be shipped in HTML format. We also recommend shipping documentation
in PDF and plain text format if convenient and if output of reasonable quality is possible. However, it is generally not
appropriate to ship plain text versions of documentation whose source format is HTML.
Major shipped manuals should register themselves with doc-base on installation. See the doc-base package docu-
mentation for more information.
Debian policy (section 12.1) directs that manual pages should accompany every program, utility, and function, and
suggests them for other objects like configuration files. If the work you are packaging does not have such manual
pages, consider writing them for inclusion in your package, and submitting them upstream.
The manpages do not need to be written directly in the troff format. Popular source formats are DocBook, POD and
reST, which can be converted using xsltproc, pod2man and rst2man respectively. To a lesser extent, the help2man
program can also be used to write a stub.

6.8.4 Specific types of packages

Several specific types of packages have special sub-policies and corresponding packaging rules and practices:
• Perl related packages have a Perl policy; some examples of packages following that policy are libdbd-pg-perl
(binary perl module) or libmldbm-perl (arch independent perl module).
• Python related packages have their Python policy; see /usr/share/doc/python/python-policy.txt.gz in
the python package.
• Emacs related packages have the emacs policy.
• Java related packages have their java policy.
• OCaml related packages have their own policy, found in /usr/share/doc/ocaml/
ocaml_packaging_policy.gz from the ocaml package. A good example is the camlzip source package.
• Packages providing XML or SGML DTDs should conform to the recommendations found in the sgml-base-doc
package.
• Lisp packages should register themselves with common-lisp-controller, about which see /usr/share/
doc/common-lisp-controller/README.packaging.
• Rust packaging is described in the Debian Rust Team Book;.

6.8. Common packaging situations 79

Debian Developer’s Reference, Release 13.15

6.8.5 Architecture-independent data

It is not uncommon to have a large amount of architecture-independent data packaged with a program. For example,
audio files, a collection of icons, wallpaper patterns, or other graphic files. If the size of this data is negligible compared
to the size of the rest of the package, it's probably best to keep it all in a single package.
However, if the size of the data is considerable, consider splitting it out into a separate, architecture-independent package
(_all.deb). By doing this, you avoid needless duplication of the same data into ten or more .debs, one per each
architecture. While this adds some extra overhead into the Packages files, it saves a lot of disk space on Debian
mirrors. Separating out architecture-independent data also reduces processing time of lintian (see Package lint
tools) when run over the entire Debian archive.

6.8.6 Needing a certain locale during build

If you need a certain locale during build, you can create a temporary file via this trick:
If you set LOCPATH to the equivalent of /usr/lib/locale, and LC_ALL to the name of the locale you generate, you
should get what you want without being root. Something like this:

LOCALE_PATH=debian/tmpdir/usr/lib/locale
LOCALE_NAME=en_IN
LOCALE_CHARSET=UTF-8

mkdir -p $LOCALE_PATH
localedef -i $LOCALE_NAME.$LOCALE_CHARSET -f $LOCALE_CHARSET $LOCALE_PATH/$LOCALE_NAME.
˓→$LOCALE_CHARSET

# Using the locale

LOCPATH=$LOCALE_PATH LC_ALL=$LOCALE_NAME.$LOCALE_CHARSET date

6.8.7 Make transition packages deborphan compliant

Deborphan is a program for helping users to detect which packages can safely be removed from the system, i.e. the ones
that have no packages depending on them. The default operation is to search only within the libs and oldlibs sections,
to hunt down unused libraries. But when passed the right argument, it tries to catch other useless packages.
For example, with --guess-dummy, deborphan tries to search all transitional packages which were needed for upgrade
but which can now be removed. For that, it currently looks for the string dummy or transitional in their short description,
though it would be better to search for both strings, as there are some dummy or transitional packages, which have other
purposes.
So, when you are creating such a package, please make sure to add transitional dummy package to the short
description to make this explicit. If you are looking for examples, just run: apt-cache search .|grep dummy or
apt-cache search .|grep transitional.
Also, it is recommended to adjust its section to oldlibs and its priority to optional in order to ease deborphan's
job.

80 Chapter 6. Best Packaging Practices

 Debian Developer’s Reference, Release 13.15

6.8.8 Best practices for .orig.tar.{gz,bz2,xz} files

There are two kinds of original source tarballs: Pristine source and repackaged upstream source.

6.8.8.1 Pristine source

The defining characteristic of a pristine source tarball is that the .orig.tar.{gz,bz2,xz} file is byte-for-byte iden-
tical to a tarball officially distributed by the upstream author.1 This makes it possible to use checksums to easily verify
that all changes between Debian's version and upstream's are contained in the Debian diff. Also, if the original source
is huge, upstream authors and others who already have the upstream tarball can save download time if they want to
inspect your packaging in detail.
There are no universally accepted guidelines that upstream authors follow regarding the directory structure inside their
tarball, but dpkg-source is nevertheless able to deal with most upstream tarballs as pristine source. Its strategy is
equivalent to the following:
1. It unpacks the tarball in an empty temporary directory by doing

zcat path/to/packagename_upstream-version.orig.tar.gz | tar xf -

2. If, after this, the temporary directory contains nothing but one directory and no other files, dpkg-source renames
that directory to packagename-upstream-version(.orig). The name of the top-level directory in the tarball does
not matter, and is forgotten.
3. Otherwise, the upstream tarball must have been packaged without a common top-level directory (shame on the up-
stream author!). In this case, dpkg-source renames the temporary directory itself to packagename-upstream-
version(.orig).

6.8.8.2 Repackaged upstream source

You should upload packages with a pristine source tarball if possible, but there are various reasons why it might not
be possible. This is the case if upstream does not distribute the source as gzipped tar at all, or if upstream's tarball
contains non-DFSG-free material that you must remove before uploading.
In these cases the developer must construct a suitable .orig.tar.{gz,bz2,xz} file themselves. We refer to such
a tarball as a repackaged upstream source. Note that a repackaged upstream source is different from a Debian-native
package. A repackaged source still comes with Debian-specific changes in a separate .diff.gz or .debian.tar.
{gz,bz2,xz} and still has a version number composed of upstream-version and debian-version.
There may be cases where it is desirable to repackage the source even though upstream distributes a .tar.{gz,bz2,
xz} that could in principle be used in its pristine form. The most obvious is if significant space savings can be achieved
by recompressing the tar archive or by removing genuinely useless cruft from the upstream archive. Use your own
discretion here, but be prepared to defend your decision if you repackage source that could have been pristine.
A repackaged .orig.tar.{gz,bz2,xz}
1. should be documented in the resulting source package. Detailed information on how the repackaged source was
obtained, and on how this can be reproduced should be provided in debian/copyright, ideally in a way that
can be done automatically with uscan. If that really doesn't work, at least provide a get-orig-source target in
your debian/rules file that repeats the process, even though that was actually deprecated in the 4.1.4 version
of the Debian policy.
1 We cannot prevent upstream authors from changing the tarball they distribute without also incrementing the version number, so there can be no

guarantee that a pristine tarball is identical to what upstream currently distributing at any point in time. All that can be expected is that it is identical
to something that upstream once did distribute. If a difference arises later (say, if upstream notices that they weren't using maximal compression in
their original distribution and then re-gzip it), that's just too bad. Since there is no good way to upload a new .orig.tar.{gz,bz2,xz} for the
same version, there is not even any point in treating this situation as a bug.

6.8. Common packaging situations 81

Debian Developer’s Reference, Release 13.15

2. should not contain any file that does not come from the upstream author(s), or whose contents has been changed
by you.2
3. should, except where impossible for legal reasons, preserve the entire building and portability infrastructure
provided by the upstream author. For example, it is not a sufficient reason for omitting a file that it is used only
when building on MS-DOS. Similarly, a Makefile provided by upstream should not be omitted even if the first
thing your debian/rules does is to overwrite it by running a configure script.
(Rationale: It is common for Debian users who need to build software for non-Debian platforms to fetch the
source from a Debian mirror rather than trying to locate a canonical upstream distribution point).
4. may use packagename-upstream-version+dfsg (or any other suffix which is added to the tarball name) as the
name of the top-level directory in its tarball. This makes it possible to distinguish pristine tarballs from repack-
aged ones.
5. should be compressed with xz (or gzip or bzip) with maximal compression.

6.8.8.3 Changing binary files

Sometimes it is necessary to change binary files contained in the original tarball, or to add binary files that are not in
it. This is fully supported when using source packages in “3.0 (quilt)” format; see the dpkg-source1 manual page for
details. When using the older format “1.0”, binary files can't be stored in the .diff.gz so you must store a uuencoded
(or similar) version of the file(s) and decode it at build time in debian/rules (and move it in its official location).

6.8.9 Best practices for debug packages

A debug package is a package that contains additional information that can be used by gdb. Since Debian binaries
are stripped by default, debugging information, including function names and line numbers, is otherwise not available
when running gdb on Debian binaries. Debug packages allow users who need this additional debugging information
to install it without bloating a regular system with the information.
The debug packages contain separated debugging symbols that gdb can find and load on the fly when debugging a
program or library. The convention in Debian is to keep these symbols in /usr/lib/debug/path, where path is the
path to the executable or library. For example, debugging symbols for /usr/bin/foo go in /usr/lib/debug/usr/
bin/foo, and debugging symbols for /usr/lib/libfoo.so.1 go in /usr/lib/debug/usr/lib/libfoo.so.1.

6.8.9.1 Automatically generated debug packages

Debug symbol packages can be generated automatically for any binary package that contains executable binaries, and
except for corner cases, it should not be necessary to use the old manually generated ones anymore. The package name
for a automatic generated debug symbol package ends in -dbgsym.
The dbgsym packages are not installed into the regular archives, but in dedicated archives. That means, if you need
the debug symbols for debugging, you need to add this archives to your apt configuration and then install the dbgsym
package you are interested in. Please read https://wiki.debian.org/HowToGetABacktrace on how to do that.
2 As a special exception, if the omission of non-free files would lead to the source failing to build without assistance from the Debian diff, it

might be appropriate to instead edit the files, omitting only the non-free parts of them, and/or explain the situation in a README.source file in the
root of the source tree. But in that case please also urge the upstream author to make the non-free components easier to separate from the rest of the
source.

82 Chapter 6. Best Packaging Practices

 Debian Developer’s Reference, Release 13.15

6.8.9.2 Manual -dbg packages

Before the advent of the automatic dbgsym packages, debug packages needed to be manually generated. The
name of a manual debug packages ends in -dbg. It is recommended to migrate such old legacy packages to
the new dbgsym packages whenever possible. The procedure to convert your package is described in https://
wiki.debian.org/AutomaticDebugPackages but the gist is to use the --dbgsym-migration='pkgname-dbg (<<
currentversion~)' switch of the dh_strip command.
However, sometimes it is not possible to convert to the new dbgsym packages, or you will encounter the old manual
-dbg packages in the archives, so you might need to deal with them. It is not recommended to create manual -dbg
packages for new packages, except if the automatic ones won't work for some reason.
One reason could be that debug packages contains an entire special debugging build of a library or other binary. How-
ever, usually separating debugging information from the already built binaries is sufficient and will also save space and
build time.
This is the case, for example, for debugging symbols of Python extensions. For now the right way to package Python
extension debug symbols is to use -dbg packages as described in https://wiki.debian.org/Python/DbgBuilds.
To create -dbg packages, the package maintainer has to explicitly specify them in debian/control.
The debugging symbols can be extracted from an object file using objcopy --only-keep-debug. Then the object
file can be stripped, and objcopy --add-gnu-debuglink used to specify the path to the debugging symbol file.
objcopy 1 explains in detail how this works.
Note that the debug package should depend on the package that it provides debugging symbols for, and this dependency
should be versioned. For example:

Depends: libfoo (= ${binary:Version})

The dh_strip command in debhelper supports creating debug packages, and can take care of using objcopy to
separate out the debugging symbols for you. If your package uses debhelper/9.20151219 or newer, you don't need
to do anything. debhelper will generate debug symbol packages (as package-dbgsym) for you with no additional
changes to your source package.

6.8.10 Best practices for meta-packages

A meta-package is a mostly empty package that makes it easy to install a coherent set of packages that can evolve over
time. It achieves this by depending on all the packages of the set. Thanks to the power of APT, the meta-package
maintainer can adjust the dependencies and the user's system will automatically get the supplementary packages. The
dropped packages that were automatically installed will be also be marked as removal candidates (and are even auto-
matically removed by aptitude). gnome and linux-image-amd64 are two examples of meta-packages (built by the
source packages meta-gnome2 and linux-latest).
The long description of the meta-package must clearly document its purpose so that the user knows what they will lose
if they remove the package. Being explicit about the consequences is recommended. This is particularly important for
meta-packages that are installed during initial installation and that have not been explicitly installed by the user. Those
tend to be important to ensure smooth system upgrades and the user should be discouraged from uninstalling them to
avoid potential breakages.

6.8. Common packaging situations 83

Debian Developer’s Reference, Release 13.15

84 Chapter 6. Best Packaging Practices

 CHAPTER

SEVEN

BEYOND PACKAGING

Debian is about a lot more than just packaging software and maintaining those packages. This chapter contains infor-
mation about ways, often really critical ways, to contribute to Debian beyond simply creating and maintaining packages.
As a volunteer organization, Debian relies on the discretion of its members in choosing what they want to work on and
in choosing the most critical thing to spend their time on.

7.1 Bug reporting

We encourage you to file bugs as you find them in Debian packages. In fact, Debian developers are often the first line
testers. Finding and reporting bugs in other developers' packages improves the quality of Debian.
Read the instructions for reporting bugs in the Debian bug tracking system.
Try to submit the bug from a normal user account at which you are likely to receive mail, so that people can reach you
if they need further information about the bug. Do not submit bugs as root.
You can use a tool like reportbug 1 to submit bugs. It can automate and generally ease the process.
Make sure the bug is not already filed against a package. Each package has a bug list easily reachable at https://bugs.
debian.org/packagename. Utilities like querybts 1 can also provide you with this information (and reportbug will
usually invoke querybts before sending, too).
Try to direct your bugs to the proper location. When for example your bug is about a package which overwrites files
from another package, check the bug lists for both of those packages in order to avoid filing duplicate bug reports.
For extra credit, you can go through other packages, merging bugs which are reported more than once, or tagging bugs
fixed when they have already been fixed. Note that when you are neither the bug submitter nor the package maintainer,
you should not actually close the bug (unless you secure permission from the maintainer).
From time to time you may want to check what has been going on with the bug reports that you submitted. Take this
opportunity to close those that you can't reproduce anymore. To find out all the bugs you submitted, you just have to
visit https://bugs.debian.org/from:your-email-addr.

85
Debian Developer’s Reference, Release 13.15

7.1.1 Reporting lots of bugs at once (mass bug filing)

Reporting a great number of bugs for the same problem on a great number of different packages — i.e., more than 10
— is a deprecated practice. Take all possible steps to avoid submitting bulk bugs at all. For instance, if checking for
the problem can be automated, add a new check to lintian so that an error or warning is emitted.
If you report more than 10 bugs on the same topic at once, it is recommended that you send a message to
[email protected] describing your intention before submitting the report, and mentioning the fact
in the subject of your mail. This will allow other developers to verify that the bug is a real problem. In addition, it will
help prevent a situation in which several maintainers start filing the same bug report simultaneously.
Please use the programs dd-list and if appropriate whodepends (from the package devscripts) to generate a list
of all affected packages, and include the output in your mail to [email protected].
Note that when sending lots of bugs on the same subject, you should send the bug report to [email protected].
org so that the bug report is not forwarded to the bug distribution mailing list.
The program mass-bug (from the package devscripts) can be used to file bug reports against a list of packages.

7.1.1.1 Usertags

You may wish to use BTS usertags when submitting bugs across a number of packages. Usertags are similar to normal
tags such as 'patch' and 'wishlist' but differ in that they are user-defined and occupy a namespace that is unique to a
particular user. This allows multiple sets of developers to 'usertag' the same bug in different ways without conflicting.
To add usertags when filing bugs, specify the User and Usertags pseudo-headers:

To: [email protected]
Subject: title-of-bug

Package: pkgname
[ ... ]
User: email-addr
Usertags: tag-name [ tag-name ... ]

description-of-bug ...

Note that tags are separated by spaces and cannot contain underscores. If you are filing bugs for a particular group or
team it is recommended that you set the User to an appropriate mailing list after describing your intention there.
To view bugs tagged with a specific usertag, visit https://bugs.debian.org/cgi-bin/pkgreport.cgi?
users=email-addr&tag=tag-name.

7.2 Quality Assurance effort

7.2.1 Daily work

Even though there is a dedicated group of people for Quality Assurance, QA duties are not reserved solely for them.
You can participate in this effort by keeping your packages as bug-free as possible, and as lintian-clean (see lintian) as
possible. If you do not find that possible, then you should consider orphaning some of your packages (see Orphaning
a package). Alternatively, you may ask the help of other people in order to catch up with the backlog of bugs that
you have (you can ask for help on [email protected] or [email protected]). At the
same time, you can look for co-maintainers (see Collaborative maintenance).

86 Chapter 7. Beyond Packaging

 Debian Developer’s Reference, Release 13.15

7.2.2 Bug squashing parties

From time to time the QA group organizes bug squashing parties to get rid of as many problems as possible. They
are announced on [email protected] and the announcement explains which area will
be the focus of the party: usually they focus on release critical bugs but it may happen that they decide to help finish a
major upgrade (like a new perl version that requires recompilation of all the binary modules).
The rules for non-maintainer uploads differ during the parties because the announcement of the party is considered
prior notice for NMU. If you have packages that may be affected by the party (because they have release critical bugs
for example), you should send an update to each of the corresponding bug to explain their current status and what you
expect from the party. If you don't want an NMU, or if you're only interested in a patch, or if you will deal with the bug
yourself, please explain that in the BTS.
People participating in the party have special rules for NMU; they can NMU without prior notice if they upload their
NMU to DELAYED/3-day at least. All other NMU rules apply as usual; they should send the patch of the NMU to the
BTS (to one of the open bugs fixed by the NMU, or to a new bug, tagged fixed). They should also respect any particular
wishes of the maintainer.
If you don't feel confident about doing an NMU, just send a patch to the BTS. It's far better than a broken NMU.

7.3 Contacting other maintainers

During your lifetime within Debian, you will have to contact other maintainers for various reasons. You may want to
discuss a new way of cooperating between a set of related packages, or you may simply remind someone that a new
upstream version is available and that you need it.
Looking up the email address of the maintainer for the package can be distracting. Fortunately, there is a simple email
alias, [email protected], which provides a way to email the maintainer, whatever their individual email
address (or addresses) may be. Replace package with the name of a source or a binary package.
You may also be interested in contacting the persons who are subscribed to a given source package via The Debian
Package Tracker. You can do so by using the [email protected] email address.

7.4 Dealing with inactive and/or unreachable maintainers

If you notice that a package is lacking maintenance, you should make sure that the maintainer is active and will continue
to work on their packages. It is possible that they are not active anymore, but haven't registered out of the system, so to
speak. On the other hand, it is also possible that they just need a reminder.
There is a simple system (the MIA database) in which information about maintainers who are deemed Missing In Action
is recorded. When a member of the QA group contacts an inactive maintainer or finds more information about one, this
is recorded in the MIA database. This system is available in /org/qa.debian.org/mia on the host qa.debian.org,
and can be queried with the mia-query tool. Use mia-query --help to see how to query the database. If you find
that no information has been recorded about an inactive maintainer yet, or that you can add more information, you
should generally proceed as follows.
The first step is to politely contact the maintainer, and wait a reasonable time for a response. It is quite hard to define
reasonable time, but it is important to take into account that real life is sometimes very hectic. One way to handle this
would be to send a reminder after two weeks.
A non-functional e-mail address is a violation of Debian Policy. If an e-mail "bounces", please file a bug against the
package and submit this information to the MIA database.

7.3. Contacting other maintainers 87

Debian Developer’s Reference, Release 13.15

If the maintainer doesn't reply within four weeks (a month), one can assume that a response will probably not happen.
If that happens, you should investigate further, and try to gather as much useful information about the maintainer in
question as possible. This includes:
• The echelon information available through the developers' LDAP database, which indicates when the
developer last posted to a Debian mailing list. (This includes mails about uploads distributed via the
[email protected] list.) Also, remember to check whether the maintainer is
marked as on vacation in the database.
• The number of packages this maintainer is responsible for, and the condition of those packages. In particular,
are there any RC bugs that have been open for ages? Furthermore, how many bugs are there in general? Another
important piece of information is whether the packages have been NMUed, and if so, by whom.
• Is there any activity of the maintainer outside of Debian? For example, they might have posted something recently
to non-Debian mailing lists or news groups.
A bit of a problem are packages which were sponsored — the maintainer is not an official Debian developer. The
echelon information is not available for sponsored people, for example, so you need to find and contact the Debian
developer who has actually uploaded the package. Given that they signed the package, they're responsible for the upload
anyhow, and are likely to know what happened to the person they sponsored.
It is also allowed to post a query to [email protected], asking if anyone is aware of the whereabouts
of the missing maintainer. Please Cc: the person in question.
Once you have gathered all of this, you can contact [email protected]. People on this alias will use the information
you provide in order to decide how to proceed. For example, they might orphan one or all of the packages of the
maintainer. If a package has been NMUed, they might prefer to contact the NMUer before orphaning the package —
perhaps the person who has done the NMU is interested in the package.
One last word: please remember to be polite. We are all volunteers and cannot dedicate all of our time to Debian. Also,
you are not aware of the circumstances of the person who is involved. Perhaps they might be seriously ill or might even
have died — you do not know who may be on the receiving side. Imagine how a relative will feel if they read the e-mail
of the deceased and find a very impolite, angry and accusing message!
On the other hand, although we are volunteers, a package maintainer has made a commitment and therefore has a
responsibility to maintain the package. So you can stress the importance of the greater good — if a maintainer does not
have the time or interest anymore, they should let go and give the package to someone with more time and/or interest.
If you are interested in working on the MIA team, please have a look at the README file in /org/qa.debian.org/
mia on qa.debian.org, where the technical details and the MIA procedures are documented, and contact mia@qa.
debian.org.

88 Chapter 7. Beyond Packaging

 Debian Developer’s Reference, Release 13.15

7.5 Interacting with prospective Debian developers

Debian's success depends on its ability to attract and retain new and talented volunteers. If you are an experienced
developer, we recommend that you get involved with the process of bringing in new developers. This section describes
how to help new prospective developers.

7.5.1 Sponsoring packages

Sponsoring a package means uploading a package for a maintainer who is not able to do it on their own. It's not a trivial
matter; the sponsor must verify the packaging and ensure that it is of the high level of quality that Debian strives to
have.
Debian Developers can sponsor packages. Debian Maintainers can't.
The process of sponsoring a package is:
1. The maintainer prepares a source package (.dsc) and puts it online somewhere (like on mentors.debian.net) or
even better, provides a link to a public VCS repository (see salsa.debian.org: Git repositories and collaborative
development platform) where the package is maintained.
2. The sponsor downloads (or checks out) the source package.
3. The sponsor reviews the source package. If they find issues, they inform the maintainer and ask them to provide
a fixed version (the process starts over at step 1).
4. The sponsor could not find any remaining problem. They build the package, sign it, and upload it to Debian.
Before delving into the details of how to sponsor a package, you should ask yourself whether adding the proposed
package is beneficial to Debian.
There's no simple rule to answer this question; it can depend on many factors: is the upstream codebase mature and not
full of security holes? Are there pre-existing packages that can do the same task and how do they compare to this new
package? Has the new package been requested by users and how large is the user base? How active are the upstream
developers?
You should also ensure that the prospective maintainer is going to be a good maintainer. Do they already have some
experience with other packages? If yes, are they doing a good job with them (check out some bugs)? Are they familiar
with the package and its programming language? Do they have the skills needed for this package? If not, are they able
to learn them?
It's also a good idea to know where they stand with respect to Debian: do they agree with Debian's philosophy and do
they intend to join Debian? Given how easy it is to become a Debian Member, you might want to only sponsor people
who plan to join. That way you know from the start that you won't have to act as a sponsor indefinitely.

7.5.1.1 Sponsoring a new package

New maintainers usually have certain difficulties creating Debian packages — this is quite understandable. They will
make mistakes. That's why sponsoring a brand new package into Debian requires a thorough review of the Debian
packaging. Sometimes several iterations will be needed until the package is good enough to be uploaded to Debian.
Thus being a sponsor implies being a mentor.
Don't ever sponsor a new package without reviewing it. The review of new packages done by ftpmasters mainly ensures
that the software is really free. Of course, it happens that they stumble on packaging problems but they really should
not. It's your task to ensure that the uploaded package complies with the Debian Free Software Guidelines and is of
good quality.

7.5. Interacting with prospective Debian developers 89

Debian Developer’s Reference, Release 13.15

Building the package and testing the software is part of the review, but it's also not enough. The rest of this section
contains a non-exhaustive list of points to check in your review.1
• Verify that the upstream tarball provided is the same that has been distributed by the upstream author (when the
sources are repackaged for Debian, generate the modified tarball yourself).
• Run lintian (see lintian). It will catch many common problems. Be sure to verify that any lintian overrides
set up by the maintainer are fully justified.
• Run licensecheck (part of devscripts) and verify that debian/copyright seems correct and complete. Look
for license problems (like files with “All rights reserved” headers, or with a non-DFSG compliant license). grep
-ri is your friend for this task.
• Build the package with pbuilder (or any similar tool, see pbuilder) to ensure that the build-dependencies are
complete.
• Proofread debian/control: does it follow the best practices (see Best practices for debian/control)? Are the
dependencies complete?
• Proofread debian/rules: does it follow the best practices (see Best practices for debian/rules)? Do you see
some possible improvements?
• Proofread the maintainer scripts (preinst, postinst, prerm, postrm, config): will the preinst/postrm
work when the dependencies are not installed? Are all the scripts idempotent (i.e. can you run them multiple
times without consequences)?
• Review any change to upstream files (either in .diff.gz, or in debian/patches/ or directly embedded in the
debian tarball for binary files). Are they justified? Are they properly documented (with DEP-3 for patches)?
• For every file, ask yourself why the file is there and whether it's the right way to achieve the desired result. Is the
maintainer following the best packaging practices (see Best Packaging Practices)?
• Build the packages, install them and try the software. Ensure that you can remove and purge the packages. Maybe
test them with piuparts.
If the audit did not reveal any problems, you can build the package and upload it to Debian. Remember that even
if you're not the maintainer, as a sponsor you are still responsible for what you upload to Debian. That's why you're
encouraged to keep up with the package through The Debian Package Tracker.
Note that you should not need to modify the source package to put your name in the changelog or in the control
file. The Maintainer field of the control file and the changelog should list the person who did the packaging, i.e.
the sponsee. That way they will get all the BTS mail.
Instead, you should instruct dpkg-buildpackage to use your key for the signature. You do that with the -k option:

dpkg-buildpackage -kKEY-ID

If you use debuild and debsign, you can even configure it permanently in ~/.devscripts:

DEBSIGN_KEYID=KEY-ID

1 You can find more checks in the wiki, where several developers share their own sponsorship checklists.

90 Chapter 7. Beyond Packaging

 Debian Developer’s Reference, Release 13.15

7.5.1.2 Sponsoring an update of an existing package

You will usually assume that the package has already gone through a full review. So instead of doing it again, you will
carefully analyze the difference between the current version and the new version prepared by the maintainer. If you
have not done the initial review yourself, you might still want to have a deeper look just in case the initial reviewer was
sloppy.
To be able to analyze the difference, you need both versions. Download the current version of the source package (with
apt-get source) and rebuild it (or download the current binary packages with aptitude download). Download
the source package to sponsor (usually with dget).
Read the new changelog entry; it should tell you what to expect during the review. The main tool you will use is
debdiff (provided by the devscripts package); you can run it with two source packages (.dsc files), or two binary
packages, or two .changes files (it will then compare all the binary packages listed in the .changes).
If you compare the source packages (excluding upstream files in the case of a new upstream version, for example by
filtering the output of debdiff with filterdiff -i '*/debian/*'), you must understand all the changes you see
and they should be properly documented in the Debian changelog.
If everything is fine, build the package and compare the binary packages to verify that the changes on the source package
have no unexpected consequences (some files dropped by mistake, missing dependencies, etc.).
You might want to check out the Package Tracking System (see The Debian Package Tracker) to verify if the maintainer
has not missed something important. Maybe there are translation updates sitting in the BTS that could have been
integrated. Maybe the package has been NMUed and the maintainer forgot to integrate the changes from the NMU
into their package. Maybe there's a release critical bug that they have left unhandled and that's blocking migration to
testing. If you find something that they could have done (better), it's time to tell them so that they can improve for
next time, and so that they have a better understanding of their responsibilities.
If you have found no major problem, upload the new version. Otherwise ask the maintainer to provide you a fixed
version.

7.5.2 Granting upload permissions to DMs

After a Debian Maintainer's key has been added to the debian-maintainers keyring, a Debian Developer may grant
upload permissions to the DM for specific packages by uploading a signed dak command to ftp.upload.debian.org as
described in the FTP-Master's announcement to debian-devel.
This process can be simplified with the help of the dcut command from the dput-ng package. Note that this does not
work with the dcut command from the dput package!
For example:

dcut dm --uid 0xfedcba9876543210 --allow nano --deny bash

If the DM's key is not in the keyring package yet but in the DD's local keyring, use the --force option and the
fingerprint, without spaces and, in this special case, without the 0x prefix and in all uppercase:

dcut --force dm --uid FEDCBA9876543210FEDCBA9876543210 --allow nano

7.5. Interacting with prospective Debian developers 91

Debian Developer’s Reference, Release 13.15

7.5.3 Advocating new developers

See the page about advocating a prospective developer at the Debian web site.

7.5.4 Handling new maintainer applications

Please see Checklist for Application Managers at the Debian web site.

92 Chapter 7. Beyond Packaging

 CHAPTER

EIGHT

INTERNATIONALIZATION AND TRANSLATIONS

Debian supports an ever-increasing number of natural languages. Even if you are a native English speaker and do not
speak any other language, it is part of your duty as a maintainer to be aware of issues of internationalization (abbreviated
i18n because there are 18 letters between the 'i' and the 'n' in internationalization). Therefore, even if you are ok with
English-only programs, you should read most of this chapter.
According to Introduction to i18n from Tomohiro KUBOTA, I18N (internationalization) means modification of soft-
ware or related technologies so that software can potentially handle multiple languages, customs, and other differences,
while L10N (localization) means implementation of a specific language for already-internationalized software.
l10n and i18n are interconnected, but the difficulties related to each of them are very different. It's not really difficult to
allow a program to change the language in which texts are displayed based on user settings, but it is very time consuming
to actually translate these messages. On the other hand, setting the character encoding is trivial, but adapting the code
to use several character encodings is a really hard problem.
Setting aside the i18n problems, where no general guideline can be given, there is actually no central infrastructure for
l10n within Debian which could be compared to the buildd mechanism for porting. So most of the work has to be done
manually.

8.1 How translations are handled within Debian

Handling translation of the texts contained in a package is still a manual task, and the process depends on the kind of
text you want to see translated.
For program messages, the gettext infrastructure is used most of the time. Often the translation is handled upstream
within projects like the Free Translation Project, the GNOME Translation Project or the KDE Localization project.
The only centralized resources within Debian are the Central Debian translation statistics, where you can find some
statistics about the translation files found in the actual packages and download those files.
Package descriptions have translations since many years and Maintainers don't need to do anything special to support
translated package descriptions; translators should use the Debian Description Translation Project (DDTP).
For debconf templates, maintainers should use the po-debconf package to ease the work of translators. Some statis-
tics can be found on the Central Debian translation statistics site.
For web pages, each l10n team has access to the relevant VCS, and the statistics are available from the Central Debian
translation statistics site.
For general documentation about Debian, the process is more or less the same as for the web pages (the translators have
access to the VCS), but there are no statistics pages.
Another part of i18n work is package-specific documentation (man pages, info documents, other formats). At least the
man page translations are po-based as most other things mentioned above.

93
Debian Developer’s Reference, Release 13.15

8.2 I18N & L10N FAQ for maintainers

This is a list of problems that maintainers may face concerning i18n and l10n. While reading this, keep in mind that
there is no real consensus on these points within Debian, and that this is only advice. If you have a better idea for
a given problem, or if you disagree on some points, feel free to provide your feedback, so that this document can be
enhanced.

8.2.1 How to get a given text translated

To translate package descriptions, you have nothing to do; the DDTP infrastructure will dispatch the material to translate
to volunteers with no need for interaction on your part.
For all other material (debconf templates, gettext files, man pages, or other documentation), the best solution is to ask
on debian-i18n for a translation in different languages. Some translation team members are subscribed to this list, and
they will take care of the needed coordination, to get the material translated and reviewed. Once they are done, you
will get your translated document from them in your mailbox or via a wishlist bugreport. It is also recommended, to
use the po-debconf tools for i18n integration.

8.2.2 How to get a given translation reviewed

From time to time, individuals translate some texts in your package and will ask you for inclusion of the translation
in the package. This can become problematic if you are not fluent in the given language. It is a good idea to send the
document to the corresponding l10n mailing list, asking for a review. Once it has been done, you should feel more
confident in the quality of the translation, and feel safe to include it in your package.

8.2.3 How to get a given translation updated

If you have some translations of a given text lying around, each time you update the original, you should ask the previous
translator to update the translation with your new changes. Keep in mind that this task takes time; at least one week to
get the update reviewed and all.
If the translator is unresponsive, you may ask for help on the corresponding l10n mailing list. If everything fails, don't
forget to put a warning in the translated document, stating that the translation is somehow outdated, and that the reader
should refer to the original document if possible.
Avoid removing a translation completely because it is outdated. Old documentation is often better than no documen-
tation at all for non-English speakers.

8.2.4 How to handle a bug report concerning a translation

The best solution may be to mark the bug as forwarded to upstream, and forward it to both the previous translator and
their team (using the corresponding debian-l10n-XXX mailing list).

94 Chapter 8. Internationalization and Translations

 Debian Developer’s Reference, Release 13.15

8.3 I18N & L10N FAQ for translators

While reading this, please keep in mind that there is no general procedure within Debian concerning these points, and
that in any case, you should collaborate with your team and the package maintainer.

8.3.1 How to help the translation effort

Choose what you want to translate, make sure that nobody is already working on it (using your debian-l10n-XXX mail-
ing list), translate it, get it reviewed by other native speakers on your l10n mailing list, and provide it to the maintainer
of the package (see next point).

8.3.2 How to provide a translation for inclusion in a package

Make sure your translation is correct (asking for review on your l10n mailing list) before providing it for inclusion.
It will save time for everyone, and avoid the chaos resulting in having several versions of the same document in bug
reports.
The best solution is to file a regular bug containing the translation against the package. Make sure to use both the patch
and l10n tags, and to not use a severity higher than 'wishlist', since the lack of translation never prevented a program
from running.

8.4 Best current practice concerning l10n

• As a maintainer, never edit the translations in any way (even to reformat the layout) without asking on the corre-
sponding l10n mailing list. You risk for example breaking the encoding of the file by doing so. Moreover, what
you consider an error can be right (or even needed) in the given language.
• As a translator, if you find an error in the original text, make sure to report it. Translators are often the most
attentive readers of a given text, and if they don't report the errors they find, nobody will.
• In any case, remember that the major issue with l10n is that it requires several people to cooperate, and that it is
very easy to start a flamewar about small problems because of misunderstandings. So if you have problems with
your interlocutor, ask for help on the corresponding l10n mailing list, on debian-i18n, or even on debian-devel
(but beware, l10n discussions very often become flamewars on that list :)
• In any case, cooperation can only be achieved with mutual respect.

8.3. I18N & L10N FAQ for translators 95

Debian Developer’s Reference, Release 13.15

96 Chapter 8. Internationalization and Translations

 CHAPTER

NINE

OVERVIEW OF DEBIAN MAINTAINER TOOLS

This section contains a rough overview of the tools available to maintainers. The following is by no means complete
or definitive, but just a guide to some of the more popular tools.
Debian maintainer tools are meant to aid developers and free their time for critical tasks. As Larry Wall says, there's
more than one way to do it.
Some people prefer to use high-level package maintenance tools and some do not. Debian is officially agnostic on this
issue; any tool that gets the job done is fine. Therefore, this section is not meant to stipulate to anyone which tools they
should use or how they should go about their duties of maintainership. Nor is it meant to endorse any particular tool to
the exclusion of a competing tool.
Most of the descriptions of these packages come from the actual package descriptions themselves. Further information
can be found in the package documentation itself. You can also see more info with the command apt-cache show
package-name.

9.1 Core tools

The following tools are pretty much required for any maintainer.

9.1.1 dpkg-dev

dpkg-dev contains the tools (including dpkg-source) required to unpack, build, and upload Debian source packages.
These utilities contain the fundamental, low-level functionality required to create and manipulate packages; as such,
they are essential for any Debian maintainer.

9.1.2 debconf

debconf provides a consistent interface to configuring packages interactively. It is user interface independent, allowing
end-users to configure packages with a text-only interface, an HTML interface, or a dialog interface. New interfaces
can be added as modules.
You can find documentation for this package in the debconf-doc package.
Many feel that this system should be used for all packages that require interactive configuration; see Configuration
management with debconf . debconf is not currently required by Debian Policy, but that may change in the future.

97
Debian Developer’s Reference, Release 13.15

9.1.3 fakeroot

fakeroot simulates root privileges. This enables you to build packages without being root (packages usually want to
install files with root ownership). If you have fakeroot installed, dpkg-buildpackage will use it automatically.

9.2 Package lint tools

According to the Free On-line Dictionary of Computing (FOLDOC), lint is: "A Unix C language processor which car-
ries out more thorough checks on the code than is usual with C compilers." Package lint tools help package maintainers
by automatically finding common problems and policy violations in their packages.

9.2.1 lintian

lintian dissects Debian packages and emits information about bugs and policy violations. It contains automated
checks for many aspects of Debian policy as well as some checks for common errors.
You should periodically get the newest lintian from unstable and check over all your packages. Notice that the -i
option provides detailed explanations of what each error or warning means, what its basis in Policy is, and commonly
how you can fix the problem.
Refer to Testing the package for more information on how and when to use Lintian.
You can also see a summary of all problems reported by Lintian on your packages at https://lintian.debian.org/. These
reports contain the latest lintian output for the whole development distribution (unstable).

9.2.2 lintian-brush

lintian-brush contains a set of scripts that can automatically fix more than 80 common lintian issues in Debian
packages.
It comes with a wrapper script that invokes the scripts, updates the changelog (if desired) and commits each change to
version control.

9.2.3 piuparts

piuparts is the .deb package installation, upgrading, and removal testing tool.
piuparts tests that .deb packages handle installation, upgrading, and removal correctly. It does this by creating
a minimal Debian installation in a chroot, and installing, upgrading, and removing packages in that environment, and
comparing the state of the directory tree before and after. piuparts reports any files that have been added, removed,
or modified during this process.
piuparts is meant as a quality assurance tool for people who create .deb packages to test them before they upload
them to the Debian archive.

98 Chapter 9. Overview of Debian Maintainer Tools

 Debian Developer’s Reference, Release 13.15

9.2.4 debdiff

debdiff (from the devscripts package, devscripts) compares file lists and control files of two packages. It is a
simple regression test, as it will help you notice if the number of binary packages has changed since the last upload, or
if something has changed in the control file. Of course, some of the changes it reports will be all right, but it can help
you prevent various accidents.
You can run it over a pair of binary packages:

debdiff package_1-1_arch.deb package_2-1_arch.deb

Or even a pair of changes files:

debdiff package_1-1_arch.changes package_2-1_arch.changes

For more information please see debdiff 1.

9.2.5 diffoscope

diffoscope provides in-depth comparison of files, archives, and directories.

diffoscope will try to get to the bottom of what makes files or directories different. It will recursively unpack archives
of many kinds and transform various binary formats into more human readable form to compare them.
Originally developed to compare two .deb files or two changes files nowadays it can compare two tarballs, ISO
images, or PDF just as easily and supports a huge variety of filetypes.
The differences can be shown in a text or HTML report or as JSON output.

9.2.6 duck

duck, the Debian Url ChecKer, processes several fields in the debian/control, debian/upstream, debian/
copyright, debian/patches/* and systemd.unit files and checks if URLs, VCS links and email address domains
found therein are valid.

9.2.7 adequate

adequate checks packages installed on the system and reports bugs and policy violations.
The following checks are currently implemented:
• broken symlinks
• missing copyright file
• obsolete conffiles
• Python modules not byte-compiled
• /bin and /sbin binaries requiring /usr/lib libraries
• missing libraries, undefined symbols, symbol size mismatches
• license conflicts
• program name collisions
• missing alternatives

9.2. Package lint tools 99

Debian Developer’s Reference, Release 13.15

• missing binfmt interpreters and detectors

• missing pkg-config dependencies

9.2.8 i18nspector

i18nspector is a tool for checking translation templates (POT), message catalogues (PO) and compiled message
catalogues (MO) files for common problems.

9.2.9 cme

cme is a tool from the libconfig-model-dpkg-perl package is an editor for dpkg source files with validation. Check
the package description to see what it can do.

9.2.10 licensecheck

licensecheck attempts to determine the license that applies to each file passed to it, by searching the start of the file
for text belonging to various licenses.

9.2.11 blhc

blhc is a tool which checks build logs for missing hardening flags.

9.3 Helpers for debian/rules

Package building tools make the process of writing debian/rules files easier. See Helper scripts for more information
about why these might or might not be desired.

9.3.1 debhelper

debhelper is a collection of programs that can be used in debian/rules to automate common tasks related to building
binary Debian packages. debhelper includes programs to install various files into your package, compress files, fix
file permissions, and integrate your package with the Debian menu system.
Unlike some approaches, debhelper is broken into several small, simple commands, which act in a consistent manner.
As such, it allows more fine-grained control than some of the other debian/rules tools.
There are a number of little debhelper add-on packages, too transient to document. You can see the list of most of
them by doing apt-cache search ^dh-.
When choosing a debhelper compatibility level for your package, you should choose the highest compatibility level
that is supported in the most recent stable release. Only use a higher compatibility level if you need specific features
that are provided by that compatibility level that are not available in earlier levels.
In the past the compatibility level was defined in debian/compat, however nowadays it is much better to not use that
but rather to use a versioned build-dependency like debhelper-compat (=12).

100 Chapter 9. Overview of Debian Maintainer Tools

 Debian Developer’s Reference, Release 13.15

9.3.2 dh-make

The dh-make package contains dh_make, a program that creates a skeleton of files necessary to build a Debian package
out of a source tree. As the name suggests, dh_make is a rewrite of debmake, and its template files use dh_* programs
from debhelper.
While the rules files generated by dh_make are in general a sufficient basis for a working package, they are still just
the groundwork: the burden still lies on the maintainer to finely tune the generated files and make the package entirely
functional and Policy-compliant.

9.3.3 equivs

equivs is another package for making packages. It is often suggested for local use if you need to make a package
simply to fulfill dependencies. It is also sometimes used when making meta-packages, which are packages whose only
purpose is to depend on other packages.

9.4 Package builders

The following packages help with the package building process, general driving of dpkg-buildpackage, as well as
handling supporting tasks.

9.4.1 git-buildpackage

git-buildpackage provides the capability to inject or import Debian source packages into a Git repository, build a
Debian package from the Git repository, and helps in integrating upstream changes into the repository.
These utilities provide an infrastructure to facilitate the use of Git by Debian maintainers. This allows one to keep
separate Git branches of a package for stable, unstable and possibly experimental distributions, along with the
other benefits of a version control system.

9.4.2 debootstrap

The debootstrap package and script allows you to bootstrap a Debian base system into any part of your filesystem.
By base system, we mean the bare minimum of packages required to operate and install the rest of the system.
Having a system like this can be useful in many ways. For instance, you can chroot into it if you want to test your
build dependencies. Or you can test how your package behaves when installed into a bare base system. Chroot builders
use this package; see below.

9.4.3 pbuilder

pbuilder constructs a chrooted system, and builds a package inside the chroot. It is very useful to check that a
package's build dependencies are correct, and to be sure that unnecessary and wrong build dependencies will not exist
in the resulting package.
A related package is cowbuilder, which speeds up the build process using a COW filesystem on any standard Linux
filesystem.

9.4. Package builders 101

Debian Developer’s Reference, Release 13.15

9.4.4 sbuild

sbuild is another automated builder. It can use chrooted environments as well. It can be used stand-alone, or as part
of a networked, distributed build environment. As the latter, it is part of the system used by porters to build binary
packages for all the available architectures. See wanna-build for more information, and https://buildd.debian.org/ to
see the system in action.

9.5 Package uploaders

The following packages help automate or simplify the process of uploading packages into the official archive.

9.5.1 dupload

dupload is a package and a script to automatically upload Debian packages to the Debian archive, to log the upload,
and to optionally send mail about the upload of a package. It supports various kinds of hooks to extend its functionality,
and can be configured for new upload locations or methods, although by default it provides various hooks performing
checks and comes configured with all Debian upload locations.

9.5.2 dput

The dput package and script do much the same thing as dupload, but in a different way. Out of the box it supports to
run dinstall in dry-run mode after the upload.

9.5.3 dcut

The dcut script (part of the package dput, dput) helps in removing files from the ftp upload directory.

9.6 Maintenance automation

The following tools help automate different maintenance tasks, from adding changelog entries or signature lines and
looking up bugs in Emacs to making use of the newest and official config.sub.

9.6.1 devscripts

devscripts is a package containing wrappers and tools that are very helpful for maintaining your Debian packages.
Example scripts include debchange (or its alias, dch), which manipulates your debian/changelog file from the
command-line, and debuild, which is a wrapper around dpkg-buildpackage. The bts utility is also very helpful
to update the state of bug reports on the command line. uscan can be used to watch for new upstream versions of your
packages (see https://wiki.debian.org/debian/watch for more info on that). suspicious-source outputs a list of files
which are not common source files.
See the devscripts 1 manual page for a complete list of available scripts.

102 Chapter 9. Overview of Debian Maintainer Tools

 Debian Developer’s Reference, Release 13.15

9.6.2 reportbug

reportbug is a tool designed to make the reporting of bugs in Debian and derived distributions relatively painless. Its
features include:
• Integration with mutt and mh/nmh mail readers.
• Access to outstanding bug reports to make it easier to identify whether problems have already been reported.
• Automatic checking for newer versions of packages.
reportbug is designed to be used on systems with an installed mail transport agent; however, you can edit the config-
uration file and send reports using any available mail server.
This package also includes the querybts script for browsing the Debian bug tracking system.

9.6.3 autotools-dev

autotools-dev contains best practices for people who maintain packages that use autoconf and/or automake. Also
contains canonical config.sub and config.guess files, which are known to work on all Debian ports.

9.6.4 dpkg-repack

dpkg-repack creates a Debian package file out of a package that has already been installed. If any changes have been
made to the package while it was unpacked (e.g., files in /etc were modified), the new package will inherit the changes.
This utility can make it easy to copy packages from one computer to another, or to recreate packages that are installed
on your system but no longer available elsewhere, or to save the current state of a package before you upgrade it.

9.6.5 alien

alien converts binary packages between various packaging formats, including Debian, RPM (RedHat), LSB (Linux
Standard Base), Solaris, and Slackware packages.

9.6.6 dpkg-dev-el

dpkg-dev-el is an Emacs lisp package that provides assistance when editing some of the files in the debian directory
of your package. For instance, there are handy functions for listing a package's current bugs, and for finalizing the latest
entry in a debian/changelog file.

9.6.7 dpkg-depcheck

dpkg-depcheck (from the devscripts package, devscripts) runs a command under strace to determine all the
packages that were used by the said command.
For Debian packages, this is useful when you have to compose a Build-Depends line for your new package: running
the build process through dpkg-depcheck will provide you with a good first approximation of the build-dependencies.
For example:

dpkg-depcheck -b debian/rules build

9.6. Maintenance automation 103

Debian Developer’s Reference, Release 13.15

dpkg-depcheck can also be used to check for run-time dependencies, especially if your package uses exec 2 to run
other programs.
For more information please see dpkg-depcheck 1.

9.6.8 debputy

The debputy tools is new since 2024. While its main purpose is to offer a new Debian package build paradigm, it
includes subcommands that can be used on any existing Debian package to validate the correctness of most of the files
in debian/*, and in many cases also automatically fix them.
To check correctness of files in debian/* run:

debputy lint --spellcheck

To format debian/control and debian/tests/control files

debputy reformat --style black

Using the reformat command obsoletes using wrap-and-sort -ast.

The debputy tool also includes a language server which, when integrated with a code editor, can give real-time feedback
on the correctness of files in debian/* while editing them.
For more information please see debputy 1.

9.7 Porting tools

The following tools are helpful for porters and for cross-compilation.

9.7.1 dpkg-cross

dpkg-cross is a tool for installing libraries and headers for cross-compiling in a way similar to dpkg. Furthermore,
the functionality of dpkg-buildpackage and dpkg-shlibdeps is enhanced to support cross-compiling.

9.8 Documentation and information

The following packages provide information for maintainers or help with building documentation.

9.8.1 debian-policy

The debian-policy package contains the Debian Policy Manual and related documents, which are:
• Debian Policy Manual
• Filesystem Hierarchy Standard (FHS)
• Debian Menu sub-policy
• Debian Perl sub-policy
• Debian configuration management specification

104 Chapter 9. Overview of Debian Maintainer Tools

 Debian Developer’s Reference, Release 13.15

• Machine-readable debian/copyright specification

• Autopkgtest - automatic as-installed package testing
• Authoritative list of virtual package names
• Policy checklist for upgrading your packages
The Debian Policy Manual the policy relating to packages and details of the packaging mechanism. It covers everything
from required gcc options to the way the maintainer scripts (postinst etc.) work, package sections and priorities,
etc.
Also useful is the file /usr/share/doc/debian-policy/upgrading-checklist.txt.gz, which lists changes be-
tween versions of policy.

9.8.2 doc-debian

doc-debian contains lots of useful Debian-specific documentation:

• Debian Linux Manifesto
• Constitution for the Debian Project
• Debian Social Contract
• Debian Free Software Guidelines
• Debian Bug Tracking System documentation
• Introduction to the Debian mailing lists

9.8.3 developers-reference

The developers-reference package contains the document you are reading right now, the Debian Developer's Ref-
erence, a set of guidelines and best practices which has been established by and for the community of Debian developers.

9.8.4 maint-guide

The maint-guide package contains the Debian New Maintainers' Guide.

This document tries to describe the building of a Debian package to ordinary Debian users and prospective developers.
It uses fairly non-technical language, and it's well covered with working examples.

9.8.5 debmake-doc

The debmake-doc package contains the Guide for Debian Maintainers.

This document is newer than Debian New Maintainers' Guide and intends to replace it. The Guide for Debian Main-
tainers caters to those learning Debian packaging and covers a wide range of topics and tools, along with plenty of
examples about various types of packaging issues.

9.8. Documentation and information 105

Debian Developer’s Reference, Release 13.15

9.8.6 packaging-tutorial

This tutorial is an introduction to Debian packaging. It teaches prospective developers how to modify existing packages,
how to create their own packages, and how to interact with the Debian community.
In addition to the main tutorial, it includes three practical sessions on modifying the grep package, and packaging the
gnujump game and a Java library.

9.8.7 how-can-i-help

how-can-i-help shows opportunities for contributing to Debian. how-can-i-help hooks into APT to list opportuni-
ties for contributions to Debian (orphaned packages, bugs tagged 'newcomer') for packages installed locally, after each
APT invocation. It can also be invoked directly, and then lists all opportunities for contribution (not just the new ones).

9.8.8 docbook-xml

docbook-xml provides the DocBook XML DTDs, which are commonly used for Debian documentation (as is the
older debiandoc SGML DTD).
The docbook-xsl package provides the XSL files for building and styling the source to various output formats. You
will need an XSLT processor, such as xsltproc, to use the XSL stylesheets. Documentation for the stylesheets can be
found in the various docbook-xsl-doc-* packages.
To produce PDF from FO, you need an FO processor, such as xmlroff or fop. Another tool to generate PDF from
DocBook XML is dblatex.

9.8.9 debiandoc-sgml

debiandoc-sgml provides the DebianDoc SGML DTD, which has been commonly used for Debian documentation,
but is now deprecated (docbook-xml or python3-sphinx should be used instead).

9.8.10 debian-keyring

Contains the public OpenPGP keys of Debian Developers and Maintainers. See Maintaining your public key and the
package documentation for more information.

9.8.11 debian-el

debian-el provides an Emacs mode for viewing Debian binary packages. This lets you examine a package without
unpacking it.

106 Chapter 9. Overview of Debian Maintainer Tools