Scribd
Upload
3 views

Lp-week 8 Hand Tools

This document outlines a detailed lesson plan for an 8th-grade Technology and Livelihood Education class focused on Electronic Products Assembly and Services. The lesson aims to teach students about hand tools used in electronics, including their identification, selection, and importance. It includes objectives, subject matter, learning strategies, activities, evaluation, and an assignment for further research.

Uploaded by

leattnerrezada
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
3 views

Lp-week 8 Hand Tools

This document outlines a detailed lesson plan for an 8th-grade Technology and Livelihood Education class focused on Electronic Products Assembly and Services. The lesson aims to teach students about hand tools used in electronics, including their identification, selection, and importance. It includes objectives, subject matter, learning strategies, activities, evaluation, and an assignment for further research.

Uploaded by

leattnerrezada
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 9

A Detailed Lesson Plan in Technology and Livelihood Education

Electronic Products Assembly and Services(EPAS) 8

Name: Ivy J. Omandam Subject: TLE VIII- EPAS


Position: Student Teacher Year & Section: 8
Date & Time: April 24, 2023 School: Looc National High School
11:00- 12:00 am
Time Frame: 1 hour

I. OBJECTIVES
At the end of the lesson, the students will be able to;
a. Identify the appropriate hand tools use in electronics.
b. Select appropriate hand tools according to task requirements.
c. Appreciate the importance of hand tools.
II. SUBJECT MATTER: Hand tools
A. References: K to 12 Learning Module pages 5-10
B. Materials: Power point presentation and Instructional Materials
C. Strategies: Discussion, Group Activity
D. Process: Preparing & Identifying
III. LEARNING STRATEGIES

Teachers Activity Students Activity


A. Preparatory Activities
1. Prayer
Everybody stand for our prayer. Praying
2. Greetings
Good morning class! Good morning
Kindly pick up some pieces of Students are picking up some pieces of
papers and arrange your chairs papers and arranging their chairs properly.
properly.

Present ma’am

3. Checking of Attendance
Let us check your attendance.
Please say present if your name is
called.
4. Review of past lesson
Class, what was our topic last
meeting? Electronics

Okay very good!


5. Motivation
Directions: I will be showing you a
different pictures and you’ll identify
what it is. For the student that got
the correct answer will be given 5
points. Ready? Yes, ma’am!
Students are participating

B. Learning Activities
1. Analysis
Based from the activity, what do you
think is our topic today? Ma’am our topic is all about hand tools.

Very good, let us give 3 claps!

Let us know first, the word hand tools?


A hand tool is any tool that is powered by Basic Hand Tools
hand rather than a motor.
Driving of Tools

1. Screwdrivers are hand tools specifically


designed to insert and tighten, or to
loosen and remove screws. A screwdriver
comprises a head or tip, which engages
with a screw, a mechanism to apply force
by rotating the tip, and some way to
position and support the screwdriver, the
tip of which is shaped in to fit a particular
type of screw.

a. Slotted Screwdriver is used to drive or


fasten negative slotted screws.

b. Phillips Screwdriver – used to drive or


fasten positive slotted screws. It is a
screwdriver that could take greater torque
and could provide tighter fastenings.

c. Jeweler's Screwdriver Set – is a set of


small screw drivers composed of slotted
and Phillips screwdrivers.

Soldering Tools

1. Soldering Iron – is a device for applying


heat to melt solder in attaching two metal
parts. A soldering iron is composed of a
heated metal tip and an insulated
handle. For electrical work, wires are usually
soldered to printed circuit boards,
other wires, or small terminals. A low-power
iron (20-30 Watts) is suitable for this work.

2. Soldering Tool Stand – is a place where


the soldering iron is placed during
usage. This will keep the soldering iron away
from flammable materials. The
stand often comes with a sponge used in
cleaning the tip of the soldering iron.

3. Desoldering tool is used in removing


soldered wires and components on printed
circuit boards for troubleshooting and repair
purposes.

Splicing Tools

1. Long Nose is used for holding, bending, and


stretching the lead of electronic component
or connecting wires.

2. Side Cutter is a wire-cutting pliers, though


they are not used to grab or turn anything,
but are used to cut wires.

3. Wire Stripper is a pair of opposing blades


much like scissors or wire cutters. The
addition of a center notch makes it easier to
cut the insulation without cutting the wire.

Boring Tools

1. 12V Mini-Drill – is used to bore or drill


holes in the printed circuit board (PCB)
with sizes from 1/32” – 1/16”.

2. Portable Electric Drill is used for boring


hole(s) in plastic or metal chassis with
the used of drill bits having sizes from 1/6” to
approximately 1/4”.

3. Metal Files These are hand tools having a


series of sharp, parallel ridges or teeth.
Most files have a narrow, pointed tang at
one end to which a handle can be fitted.
Flat File is parallel in width and tapered in
thickness; they are used for flat
surfaces and edges.
Half Round File is tapered in width and
thickness, coming to a point, and
is narrower than a standard half round and
used for filing inside of rings.
Round File - is also called rat-tail file which
is gradually tapered and
used for many tasks that require a round tool,
such as enlarging round holes or cutting a
scalloped edge.
Cutting Tools

1. Utility Knife is a common tool used in


cutting various trades and crafts for
a variety of purposes.

2. Hacksaw is used for cutting metals. Some


have pistol grips which keep the
hacksaw firm and easy to grip. The small
hand-held hacksaws consist of a metal arch
with a handle that fits around narrow, rigid
blade.

Auxiliary Tools
1. Magnifying Glass is a convex lens which is
used to produce a magnified image
of an object. The lens is usually mounted on
a frame with a handle. A magnifying glass
works by creating a magnified virtual image
of an object behind the lens. Some
magnifying glasses are foldable with built-in
light.
2. Paint Brush – made of bristles set in handle,
use for cleaning dirty parts of a
circuit or an object.

Do you have any questions?


Ok, let us have an activity. No, ma’am!

2. Activity
Directions: Give the appropriate name of the
tools of the following:
1.

Answer
1. Desoldering Pump
2. Screwdriver
3. Slotted screwdriver
4. Soldering iron
2. 5. Side cutter plier

3.

4.

5.
3. Abstraction
Based on our discussion,
How important to have a hand It is important to have to have hand tool in
tool in your house? our house because it helps us do the basic
repair of our appliances immediately.

Very good!
4. Application
Direction: Match the different hand tools with their
actual pictures. Write the letter on a
separate sheet.
1. Desoldering tool
2. Soldering iron
3. Soldering stand
4. Long nose pliers
5. Portable electric drill
6. Paint brush
7. Hacksaw
8. Side-cutter
9. Wire splicer
10. Magnifying glass
5. EVALUATION Answer
Directions: Get ¼ sheet of paper and answer 1. Jewellers screwdriver set
the question given below. 2. Soldering stand
1. It is a set of small screw drivers 3. Long nose
composed of slotted and Phillips 4. Portable Electric Drill
screwdrivers. 5. Hacksaw
2. A place where the soldering iron is
placed during usage.
3. Used for holding, bending, and
stretching the lead of electronic
component or connecting wires.

4. It is used for boring hole(s) in plastic or


metal chassis with the used of drill bits
having sizes from 1/6” to approximately
1/4”.
5. It is used for cutting metals.

6. ASSIGNMENT
Research in advance about
resistor.

Prepared by:
Ivy J. Omandam
Student Intern
Noted by:
Roderico M. Paña
Cooperating Teacher

You might also like