Scribd
Upload
6 views2 pages

Analisador de Cabo e Antena RigExpert 600 MHZ

The RigExpert AA-600, AA-1000, and AA-1400 are advanced antenna analyzers designed for testing and tuning antennas and feedlines, offering frequency ranges of 0.1 to 600 MHz, 0.1 to 1000 MHz, and 0.1 to 1400 MHz respectively. They feature user-friendly measurement modes, SWR and impedance measurement capabilities, and can connect to a PC for enhanced functionality. The analyzers are suitable for both professionals and hobbyists, with options for different display modes and calibration features.

Uploaded by

carlaoengenharia1959
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
6 views2 pages

Analisador de Cabo e Antena RigExpert 600 MHZ

The RigExpert AA-600, AA-1000, and AA-1400 are advanced antenna analyzers designed for testing and tuning antennas and feedlines, offering frequency ranges of 0.1 to 600 MHz, 0.1 to 1000 MHz, and 0.1 to 1400 MHz respectively. They feature user-friendly measurement modes, SWR and impedance measurement capabilities, and can connect to a PC for enhanced functionality. The analyzers are suitable for both professionals and hobbyists, with options for different display modes and calibration features.

Uploaded by

carlaoengenharia1959
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

RigExpert Antenna Analyzers AA-600 / AA-1000 / AA-1400

Main Menu Single-point SWR


measurement

"Show all" screen SWR graph

0.1 ... 600 МHz 0.1 ... 1000 МHz 0.1 ... 1400 МHz

RigExpert AA-600, AA-1000 and AA-1400 are powerful


antenna analyzers designed for testing, checking, tuning or
repairing antennas and antenna feedlines. R, X graph Impulse response and
step response graph
Mainly, these are SWR (Standing Wave Ratio) and impedance
measurement instruments (vector impedance analyzers).

Easy-to use measurement modes, as well as additional


features such as connection to a personal computer make
RigExpert AA-600, AA-1000 and AA-1400 attractive for
professionals and hobbyists.
Multi-point SWR Frequency entry
measurement
The analyzers are available in non-US version (with ability
to display Smith chart) and US version (displaying a polar chart
instead).

The following tasks are easily accomplished by using


these analyzers:
• Rapid check-out of an antenna
"Save to memory" Data values at cursor
• Tuning an antenna to resonance screen
• Antenna SWR and impedance measurement and
comparison before and after specific event (rain,
hurricane, etc.)
• Making coaxial lines or measuring their parameters
• Cable testing and fault location
• Measuring capacitance or inductance of reactive loads

Smith chart Polar chart

Rig Expert Ukraine Ltd., Yakira st. 17A, 04119, Kyiv, phone/fax +380 44 353-92-42
AA-600 / AA-1000 / AA-1400 RigExpert Antenna Analyzers

AntScope
Specifications software capabilities
Frequency range: 0.1 to 600 MHz — AA-600
0.1 to 1000 MHz — AA-1000
0.1 to 1400 MHz — AA-1400
Frequency entry: 1 kHz resolution
Measurement for 25, 50, 75 and 100-Ohm systems
SWR measurement range: 1 to 100 in numerical mode,
1 to 10 in graph mode SWR graph
SWR display: numerical or easily-readable bar
R and X range: 0…10000, -10000…10000 in numerical mode,
0…1000, -1000…1000 in graph mode

Display modes:
• SWR at single or multiple frequencies
• SWR, return loss, R, X, Z, L, C at single frequency
• SWR graph, 80 points
• R, X graph, 80 points Return loss graph
• Smith (or polar) chart, 80 points
• TDR (Time Domain Reflectometer) graph

Optional open-short-load calibration in SWR, R,X or Smith/polar


chart graph modes

RF output:
• Connector type: N R,X,Z graph,
• Output signal shape: rectangular, 0.1 to 200 MHz. For higher series model
frequencies, harmonics of the main signal are used.
• Output power: -10 dBm (at 50 Ohm load)

Power:
• Three 1.5 V, alcaline batteries, type AA
• Three 1.2 V, 1800…3000 mAh, Ni-MH batteries, type AA
• Max. 3 hours of continuous measurement, max. 2 days in stand-by
mode when fully charged batteries are used
Impulse response
• When the analyzer is connected to a PC or a DC adapter with USB and step response graph
socket, it takes power from these sources

Interface:
• 320x240 color TFT display
• 6x3 keys on the water-proof keypad
• Multilingual menus and help screens
• USB connection to a personal computer

Dimensions: 23x10x5.5 cm (9x4x2”)


Smith chart
Operating temperature: 0…40 °C (32…104 °F)
Weight: 650g (23 Oz)

You might also like