Pioneering for You

Submersible pump for Groundwater . DURAN

Wilo Zetos K10

Multistage stainless steel cast submersible pump
 2 Zetos K8

Zetos K10
New Borehole Series from Wilo

Using an innovative new manufacturing process – called Precision Cast has allowed
Wilo to re-define hydraulic efficiency, while significantly reducing the machining
(84%).

This allows for

ƒƒQuicker delivery times Hydraulics
ƒƒReduced manufacturing costs
ƒ Increased efficiencies up to 88% (84% Ave)
ƒƒImproved hydraulic efficiencies
ƒ Short Bearing Distances (Reduces bending/fatigue)
ƒ 84% reduction in machining = Low Embedded Carbon
Coupled with the revised motor design,
ƒ Engineered Fixing of impellers to Shafts (Key/Splines)
the Zetos K8 has delivered significant
ƒ Encapsulated Bearings – impervious to Solids
improvements in operating costs.
ƒ Vibration Bearing Mountings
ƒ Internal Check Valve with Guide Sleeve to prevent sand blocking
ƒ CT – Efficiency coating (optional)
ƒ No Special Tools (Designed to be repaired)
ƒ Double Bearings – with Spiral Grooves
ƒ Shaft Protection Sleeves – Standard
ƒ 20% oversized shaft
ƒ Sand content up to 150 g/m³
ƒ Reduced material waste
ƒ Reduced embedded carbon
ƒ Significant improvement in tolerance
ƒ Engineered options to specific application – available
ƒ Material Options – 316 standard, Duplex optional
ƒ CERAM – Ceramic coating / wear part options
 Zetos K8 3

Zetos K10
Features
No. Feature Function Customer advantage

Configurable Universal application due

to numerous hydraulic/
mechanical designs

1 Wear ring made of EPDM, Elastic deformation Increased service life

optionally made of stainless Reduced abrasion /
steel corrosion

2 Additional bearing clearance Avoids the ingress of Improved efficiency

solids into the bearing

3 Radial bearing with form Avoids rotation of the Increased operation

closure bearing reliability

4 Defined casting for improved Increased balancing Increased operation

balance resulting in smooth and reliability
reduced bearing load.

5 Screwed clamp sleeve Not self-locking Simple assembly +

disassembly

6 Thin wall thickness, smooth Reduced weight and Reduced costs with high-
surfaces lower hydraulic losses quality material and high
efficiency

A recent example from a raw water extraction in England:

Original (2010) Existing (2014) Zetos (2016)

Unit Type Competitor NK87-10 / NU911 K8. 130-10 / NU801

Duty 600 GPM @ 540 ft. 645 GPM @ 540 ft. 645 GPM at 540 ft.

Power P2 (at Duty Point) 102kw 84kw 74kw

Material Pressed 304SS Cast Iron/Bronze (plus efficiency coating) Cast 316 SS

2016 Price $42,220 $46,387 $31,233

* Annual Energy Consumption: $104,239 $98,990 $75,635

Motors
ƒ Dual Material Rotor Shaft
ƒ Double Internal Shroud
ƒ Temperature Equalisation (Direct Cooling)
ƒ VFD Compatible
ƒ Rewindable Motors
ƒ Potable Water Filling
ƒ Counter Thrust and Thrust Bearings (Positive & Negative loads)
ƒ Nema Coupling
ƒ Oversized shaft
ƒ PE3 irradiated Winding option (72deg C Medium)
Rotor Shafts are dual material – the output
ƒ High and Low Voltage from 230-2300v
shaft part is DUPLEX, and friction welded to a ƒ Cooled & Lubricated Bearings
high density steel rotor shaft. ƒ No Special Tools required (designed to be repaired)
ƒ Standard Components (bearing/seals)
This assists with high magnetic conductivity ƒ Shroud Options (Flow & Pressure/Material
and increase flux density – improving motor ƒ Horizontal & Vertical Mounting options
efficiency significantly – while reducing cost.
 Tender text
Contact
E-mail
Phone
Fax
Customer Project ID Proyecto sin nombrar 2025-02-07 12:09:40.971

Project name
Contact Installation location
E-mail Customer pos. No.
Phone

Date 2025-02-07

Pos.no Qty. Description PG

K10.310
1 Centrifugal pump: K10.310
Well & waterworks version, in corrosion-resistant material design "C"

For use in cold, clean, chemically corrosive water applications with a max. sand content of 150
mg/l and max. particle size of 2 mm.
To this end, it is imperative to get the manufacturer to check the material durability by means of
water analysis.

HYDRAULICS

Single or multistage semi-axial submersible pump in waterworks version for vertical/horizontal

installation in staged construction.
All housing components in high-quality precision-cast stainless steel version with replaceable neck
rings made of wear-resistant materials.
Shaft and connection elements are made of high-alloy stainless steel.
Impellers in solid-metal design.
Duty point adjustment possible by impeller optimisation.
Shaft guidance by rubber plain bearings.
Radial bearings completely fluid lubricated and maintenance-free.

Submersible pump: K10.310

Type of impeller:
Number of stages: 1 - 15
Max. impeller diameter: 186 mm
Min. impeller diameter 150 mm
Max. pumped water temperature: 20 °C
(higher temperature on request)
With/without non-return valve: with non-return valve
Unit diameter: 10" (Ø245 - Ø275)
(exact diameter on request)

Selected number of stages: 2

MOTOR

"NEMA Standard" submersible motor in glandless pump technology.

In three-phase current version with rewindable stator.
Motor stator, shaft ends and connectors made of stainless steel.
Motor end parts in solid cast-iron design.
Radial bearing through water-lubricated and -cooled plain bearing made of special artificial carbon,
with incorporated spiral or longitudinal grooves.
Single-disc axial bearing or alternatively Mitchell-type tilting pad axial bearing for high loads.
Support plates and tilting pads made of stainless steel, impeller wear ring made of artificial carbon.
With integrated rotating seal ring for negative axial thrust.
Motor filling with pure potable water or water/propylene glycol
Optionally available with winding temperature monitoring by PTC thermistor or PT 100 sensor.

MOTOR DATA

Selected motor: NU 911-2/50-108

Rated power: 108 kW
Power consumption of the motor at rated power: 122.7 kW
Current consumption of the motor at rated power: 181.2 A
Number of poles: 2
Rated speed: 3456 1/min

Software version Spaix® 5-2024.2 - 2024/08/29 (Build 124), 64 bit

Subject to change Data version 21.11.2024 Pages 1/ 7
 Tender text
Contact
E-mail
Phone
Fax
Customer Project ID Proyecto sin nombrar 2025-02-07 12:09:40.971

Project name
Contact Installation location
E-mail Customer pos. No.
Phone

Date 2025-02-07

Pos.no Qty. Description PG

Cos phi at rated power: 0.85
Efficiency of the motor at rated power: 88 %
Rated frequency: 60 Hz
Starting current for direct starting: 900.0 A
Starting current for star-delta starting: 300.0 A
Starting torque: 291.0 Nm
Moment of inertia: 0.0659 kg m²
Maximum switching frequency per hour: 10
Switching break: 5 minutes
Permissible axial thrust downward: 50000 N
Permissible axial thrust upward: 5000 N
Motor filling volume: 20 l
Possible installation type: Horizontal and vertical
Maximum pumped water temperature 25 °C
(higher temperature on request)

DUTY POINT DATA

Volume flow: 340.73 m³/h

Delivery head: 85.36 m
Pump efficiency at duty point: 84.1 %
Power consumption of the motor at duty point (P1): 106.8 kW
NPSH value of the pump at duty point: 13.4 m
Impeller diameter: 182.8 mm

MATERIALS

Suction piece: 1.4408

Stage- /guide casing: 1.4408
Impeller: 1.4408
Stationary wear ring: EPDM
Pump shaft: 1.4462
clamp sleeve: 1.4462
Bearing sleeve: EPDM
Connecting screws: A4
Nuts: A4
Non-return valve: 1.4408 / AISI 316
:

1 Motor: NU 911-2/50-108
1 Shaft seal: Mechanical shaft seal
1 Flange connections: NRV G 6 I PN 63
1 Installation type: Vertical installation
1 Product version: Submersible motor pump - design C
Well & waterworks version, in corrosion-resistant material design "C"

For use in cold, clean, chemically corrosive water applications with a max. sand content of 150
mg/l and max. particle size of 2 mm.
To this end, it is imperative to get the manufacturer to check the material durability by means of
water analysis.

HYDRAULICS

Single or multistage semi-axial submersible pump in waterworks version for vertical/horizontal

Software version Spaix® 5-2024.2 - 2024/08/29 (Build 124), 64 bit

Subject to change Data version 21.11.2024 Pages 2/ 7
 Tender text
Contact
E-mail
Phone
Fax
Customer Project ID Proyecto sin nombrar 2025-02-07 12:09:40.971

Project name
Contact Installation location
E-mail Customer pos. No.
Phone

Date 2025-02-07

Pos.no Qty. Description PG

installation in staged construction.
All housing components in high-quality precision-cast stainless steel version with replaceable neck
rings made of wear-resistant materials.
Shaft and connection elements are made of high-alloy stainless steel.
Impellers in solid-metal design.
Duty point adjustment possible by impeller optimisation.
Shaft guidance by rubber plain bearings.
Radial bearings completely fluid lubricated and maintenance-free.

Submersible pump: K10.310

Type of impeller:
Number of stages: 1 - 15
Max. impeller diameter: 186 mm
Min. impeller diameter 150 mm
Max. pumped water temperature: 20 °C
(higher temperature on request)
With/without non-return valve: with non-return valve
Unit diameter: 10" (Ø245 - Ø275)
(exact diameter on request)

Selected number of stages: 2

MOTOR

"NEMA Standard" submersible motor in glandless pump technology.

In three-phase current version with rewindable stator.
Motor stator, shaft ends and connectors made of stainless steel.
Motor end parts in solid cast-iron design.
Radial bearing through water-lubricated and -cooled plain bearing made of special artificial carbon,
with incorporated spiral or longitudinal grooves.
Single-disc axial bearing or alternatively Mitchell-type tilting pad axial bearing for high loads.
Support plates and tilting pads made of stainless steel, impeller wear ring made of artificial carbon.
With integrated rotating seal ring for negative axial thrust.
Motor filling with pure potable water or water/propylene glycol
Optionally available with winding temperature monitoring by PTC thermistor or PT 100 sensor.

MOTOR DATA

Selected motor: NU 911-2/50-108

Rated power: 108 kW
Power consumption of the motor at rated power: 122.7 kW
Current consumption of the motor at rated power: 181.2 A
Number of poles: 2
Rated speed: 3456 1/min
Cos phi at rated power: 0.85
Efficiency of the motor at rated power: 88 %
Rated frequency: 60 Hz
Starting current for direct starting: 900.0 A
Starting current for star-delta starting: 300.0 A
Starting torque: 291.0 Nm
Moment of inertia: 0.0659 kg m²
Maximum switching frequency per hour: 10
Switching break: 5 minutes
Permissible axial thrust downward: 50000 N
Permissible axial thrust upward: 5000 N
Motor filling volume: 20 l
Possible installation type: Horizontal and vertical

Software version Spaix® 5-2024.2 - 2024/08/29 (Build 124), 64 bit

Subject to change Data version 21.11.2024 Pages 3/ 7
 Tender text
Contact
E-mail
Phone
Fax
Customer Project ID Proyecto sin nombrar 2025-02-07 12:09:40.971

Project name
Contact Installation location
E-mail Customer pos. No.
Phone

Date 2025-02-07

Pos.no Qty. Description PG

Maximum pumped water temperature 25 °C
(higher temperature on request)

DUTY POINT DATA

Volume flow: 340.73 m³/h

Delivery head: 85.36 m
Pump efficiency at duty point: 84.1 %
Power consumption of the motor at duty point (P1): 106.8 kW
NPSH value of the pump at duty point: 13.4 m
Impeller diameter: 182.8 mm

MATERIALS

Suction piece: 1.4408

Stage- /guide casing: 1.4408
Impeller: 1.4408
Stationary wear ring: EPDM
Pump shaft: 1.4462
clamp sleeve: 1.4462
Bearing sleeve: EPDM
Connecting screws: A4
Nuts: A4
Non-return valve: 1.4408 / AISI 316
:

Software version Spaix® 5-2024.2 - 2024/08/29 (Build 124), 64 bit

Subject to change Data version 21.11.2024 Pages 4/ 7