PT.

WINGS SURYA
Jl. Kalisosok Kidul No. 2 Surabaya – 60175

Telp.( 031 ) 3524251, 3524252 - 3524253 - 3524254 ( 4 Lines ) Fax : 3531737

MATERIAL SAFETY DATA SHEET

SECTION I : PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME : FLOOR CLEANER

MANUFACTURE NAME : PT. WINGS SURYA

ADDRESS ( Number, Street, City, Zip Code, Country ): Jalan Raya Driyorejo Km 22.9
Driyorejo- Gresik, Jawa Timur 61177
INDONESIA

Customer Service : P.O.Box. PT. WINGS SURYA 60012

Surabaya – Indonesia
0-800-18-18-818 (Toll Free)
031-5325005 (Handphone)

SECTION II : COMPOSITION AND INGREDIENT

Main Ingredient
Benzalkonium Chloride CAS #63449-41-2
Alcohol Ethoxylate CAS #68439-50-9

SECTION III : HAZARDS IDENTIFICATION

This product is classified as non-hazardous material

SECTION IV : FIRST AID MEASURES

EYES : Immediately flush eyes with large amounts of water for at

least 15 minutes while holding the eyelids open. Get prompt
medical attention

SKIN : Remove contaminated clothing and wash skin with plenty

of water. If irritation persist, see medical attention. Wash
clothing before reuse

INHALATION : Fresh air and rest. Obtain medical attention if symptoms develop.

INGESTION : Contact local poison control center or physician IMMEDIATELY!

SECTION V : FIRE AND EXPLOSION HAZARD DATA

Flammablility : Not flammable

Explosion Hazard : None

SECTION VI : ACCIDENTIAL RELEASE MEASURES

Steps to be taken in the event : Disposal is to be performed in compliance with applicable laws.
of spills, leaks, or release Small of household quantities may be disposed of in refuse or
sewer. For large (industrials) releases, cover with inert, absor
bent material, and remove to the disposal container. Material
may be slippery if spilled. Flush with plenty of water.

Waste disposal methods : Dispose of unused containers of product in accordance with

Applicabel federal, state/ provincial and local regulation

Published date : November 11th, 2022 / Rev : 1

Halaman 1 dari 3
 PT. WINGS SURYA
Jl. Kalisosok Kidul No. 2 Surabaya – 60175

Telp.( 031 ) 3524251, 3524252 - 3524253 - 3524254 ( 4 Lines ) Fax : 3531737

MATERIAL SAFETY DATA SHEET

SECTION VII : HANDLING AND STORAGE

Handling : No special procedure necessary

Store : Store in the original closed packaging under ambient conditions.

Avoid extremes heat, store in cool, dry place. Keep container
Closed all the time. Keep away from food and from children.

SECTION VIII : EXPOSURE CONTROLS AND PERSONAL PROTECTION

Respiratory Protection : No special precautions for casual exposure.

Hand Protection : For long sustained exposure, use suitable protective clothing
When necessary, e.g. polyethylene/rubber gloves

Eye Protection : If potential for ye contact exists, wear chemical goggles.

SECTION IX : PHYSICAL DAN CHEMICAL PROPERTIES

Appearance :Transparant, viscous liquid with scent

Vicosity (cps) : 600 – 1200
Solubility in Water : Soluble
pH : 6.0 – 8.0
Specific Gravity : 0.9980 – 1.0010

SECTION X : STABILITY AND REACTIVITY DATA

Stability : Stable product, no dangerous reactions known

Hazardous Polymerization : will not occur

SECTION XI : TOXICOLOGICAL INFORMATION

Not Data Available.

SECTION XII : ECOLOGICAL INFORMATION

No Data Available. The product is not expected to present an environment hazard.

SECTION XIII : DISPOSAL CONSIDERATION

Specify the appropriate Methods Disposal : Small amounts may be flushed with water to sewer. Larger
Volumes must be sent to approved plant to destruction. Collect
in marked containers and deliver to approved disposal. Disposal
of waste to be in accordance with the local regulation.

Published date : November 11th, 2022 / Rev : 1

Halaman 2 dari 3
 PT. WINGS SURYA
Jl. Kalisosok Kidul No. 2 Surabaya – 60175

Telp.( 031 ) 3524251, 3524252 - 3524253 - 3524254 ( 4 Lines ) Fax : 3531737

MATERIAL SAFETY DATA SHEET

SECTION XIV : TRANSPORTATION INFORMATION

The finished product is non hazardous under DOT

SECTION XV : REGULATORY DATA

Follow all regulations in your country or region

SECTION XVI : OTHER INFORMATION

To the best of manufacturer’s knowledge, the information contained herein is accurate. Such information may be
( without limitation ) invalild if the specified material is used in combination with another, in a particular process,
or under unsual conditions. Determination of suitability or any material for any given purpose is the sole
responsibility of the user who assumes all risk and responsibililty therefore. All materials may present unknown
hazards and should be used with appropriate caution. The manufacturer cannot and does not guarantee that the
hazards described herein are the only ones that exist.

Published date : November 11th, 2022 / Rev : 1

Halaman 3 dari 3