2022년_1학기_중간고사
2022년_1학기_중간고사
2.
Determine values of (6pt) and (6pt) that cause the circuit shown in Figure
below.
3.
(a) Find v1, v2 and v3 for the circuit below. (6pt)
- You can use a better one between mesh and node -
(b) Determine the current in the circuit shown in Figure below. (8pt)
4.
Check the superposition rule by solving in two ways (Zoom) (by comparing
those). (8pt)
5.
(a) Find the Thevenin equivalent for the circuit at terminal a-b. (10pt)
(b) Find the Norton equivalent for the circuit at terminal a-b (12pt)
- hint: source transformation
6. The circuit shown in Figure has reached steady-state before the switch opens
at time t=0.
a)Determine the values of , , , . (12pt)
b)Determine the values of , . (4pt)
7.
a)Find the load resistance( ) for the maximum power delivered to the load.
(8pt)
b)Determine the maximum power in that case. (4pt)