Scribd
Upload
18 views4 pages

Automotive EE Course Quiz and Answers

The document contains a quiz on automotive electrical and electronics covering safety precautions, component identification, removal and installation procedures, cleaning practices, and general knowledge. Key topics include the importance of PPE, the function of various electrical components, and proper tool usage. The quiz emphasizes safety, correct procedures, and maintenance in automotive electrical work.

Uploaded by

fikresilassieedom
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
18 views4 pages

Automotive EE Course Quiz and Answers

The document contains a quiz on automotive electrical and electronics covering safety precautions, component identification, removal and installation procedures, cleaning practices, and general knowledge. Key topics include the importance of PPE, the function of various electrical components, and proper tool usage. The quiz emphasizes safety, correct procedures, and maintenance in automotive electrical work.

Uploaded by

fikresilassieedom
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Automotive Electrical and Electronics

Course Quiz and Answers


Unit One: Preparing for Work
1. 1. What is the primary safety precaution when working with automotive electrical
systems?

Answer: Disconnect the battery.

2. 2. What does PPE stand for?

Answer: Personal Protective Equipment.

3. 3. Which tool is used to measure voltage, amperage, and resistance?

Answer: Multimeter.

4. 4. Which of the following is NOT a typical electrical hazard?

Answer: Water leaks.

5. 5. Why should tools be inspected before use?

Answer: To verify they function correctly and are safe.

Unit Two: Identifying Locations


6. 1. Where is the starter motor typically located in a vehicle?

Answer: Near the engine flywheel housing.

7. 2. Where are spark plugs typically found in a four-cylinder engine?

Answer: On the top or side of the engine head.

8. 3. Which of the following best describes the alternator’s position?

Answer: Attached to the engine via a drive belt.

9. 4. What is the function of the ECU?

Answer: To control electronic systems in the vehicle.

10. 5. Which system is responsible for wiper operation?

Answer: Accessories electrical.


Unit Three: Removing Components
11. 1. What is the first step before removing the alternator?

Answer: Disconnecting the battery.

12. 2. Why is it important to label disconnected wires during component removal?

Answer: To prevent mixing up connections.

13. 3. Which tool is typically used to remove spark plugs?

Answer: Spark plug wrench.

14. 4. Why should the engine cool before removing electrical components?

Answer: To avoid burns.

15. 5. What is the main reason for reading the service manual before removing
components?

Answer: To ensure correct procedures.

Unit Four: Installing Components


16. 1. Which step is crucial before installing a starter motor?

Answer: Ensuring the mounting plate is aligned.

17. 2. Why is torque specification important during installation?

Answer: It ensures proper tightness without damage.

18. 3. When connecting the alternator belt, what is essential?

Answer: Proper tension.

19. 4. What should be checked after installing headlights?

Answer: Proper alignment and functionality.

20. 5. What is a good practice when connecting horn wires?

Answer: Ensure polarity and secure connections.

Unit Five: Cleaning Up


21. 1. What is one purpose of cleaning tools after use?

Answer: Maintain their functionality and safety.


22. 2. How should scrap metal be disposed of?

Answer: Shred and separate for recycling.

23. 3. Which waste is ground up and separated before reuse?

Answer: Batteries.

24. 4. What is the recommended treatment for soiled rags with solvents?

Answer: Pre-treat and incinerate.

25. 5. Which of the following is a correct reason to follow OHS procedures?

Answer: To comply with regulations and ensure safety.

General Course Knowledge


26. 1. Which document should always be consulted for exact procedures?

Answer: Manufacturer’s service manual.

27. 2. What is the function of a circuit tester?

Answer: To check for voltage in a circuit.

28. 3. Why is hazard identification important?

Answer: To control or eliminate risks.

29. 4. Why is it important to wear PPE while working on electrical systems?

Answer: To reduce risk of injury.

30. 5. What is the main purpose of a vehicle’s ignition system?

Answer: To ignite the fuel-air mixture.

Additional
31. 1. Which is NOT an electrical/electronic component commonly found under the hood?

Answer: Tail light.

32. 2. What tool is best for stripping insulation from wires?

Answer: Wire stripper.

33. 3. Which system includes the horn and wipers?


Answer: Accessories electrical system.

34. 4. What is the recommended method for handling old spark plugs?

Answer: Place them in a tray by cylinder number.

35. 5. Which of the following is NOT recommended when removing components?

Answer: Work alone without supervision.

Course Practice
36. 1. Why is regular maintenance of tools and equipment important?

Answer: To keep them functional and safe.

37. 2. What happens if a wire is reconnected incorrectly?

Answer: It can cause component failure or short circuits.

38. 3. Which component is critical to charge the battery while driving?

Answer: Alternator.

39. 4. What is the final step after any electrical installation?

Answer: Test the system functionality.

40. 5. What is the nominal duration of the module?

Answer: 40 hours.

You might also like