Scribd
Upload
3 views

Eee Prblms

The document contains a series of tutorial problems related to electrical engineering concepts, including nodal and mesh analysis, series RL, RLC, and RC circuits, as well as superposition, Thevenin's and Norton's theorems. It includes specific questions that require calculations for impedance, power factor, and voltage across components. Additionally, it specifies which questions to solve for a digital assignment.

Uploaded by

praveenrajlaptop777
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
3 views

Eee Prblms

The document contains a series of tutorial problems related to electrical engineering concepts, including nodal and mesh analysis, series RL, RLC, and RC circuits, as well as superposition, Thevenin's and Norton's theorems. It includes specific questions that require calculations for impedance, power factor, and voltage across components. Additionally, it specifies which questions to solve for a digital assignment.

Uploaded by

praveenrajlaptop777
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

EEE1019 Tutorial Problems

Q.1

Q.2

Figure 2
Q.3

Q.4 Apply nodal analysis and determine node voltages for the circuit shown below

Q.5 For the circuit shown below apply mesh analysis and determine mesh currents
Q.6 For the circuit shown below apply mesh analysis and determine currents I1, I2, I3

Q.7 Determine the voltage across 10  using nodal analysis for the circuit shown below

Q.8 Write the node equations and determine the node voltages for the circuit shown below

Q.9 In a series RL circuit if Vs = 20sin(10t + 30o ) V, R= 10  and L=0.8 H. Determine impedance,

power factor, current, voltage across resistor and inductor.


Q.10 In a series RLC circuit if Vs = 22sin(1000t + 30o ) V, R= 12 , L=8 mH and C=100 F.

Determine impedance, power factor, current, voltage across inductor and capacitor.

Q.11 In a series RC circuit if Vs = 20sin(1000t + 10o ) V, R= 8  and C=40 F.

Determine impedance, power factor, current, voltage across inductor and capacitor.
Q.12 The voltage and current across a branch is

v(t ) = 50cos(100t + 30 ) V and i(t ) = 2cos(100t + 50 ) A.

Determine a) impedance b) real power c) reactive power d) apparent power

Q.13 The impedance of a load branch is 4+j0.8 , the voltage across the branch is 4020o V.
Determine a) power factor angle b) real power c) reactive power d) apparent power.
Q.14 For the circuit shown below calculate the current I using superposition theorem

Q.15 Determine the voltage across 2+j5  impedance for the circuit shown below using
superposition theorem. All reactances and resistances are measured in ohms
Q.16 In the circuit shown below, find the current through 6  resistor using superposition theorem

Q.17 Determine current in 10  resistance using Norton’s theorem in the network shown below

Q.18 Find the Thevenin’s equivalent circuit across A-B also draw the Norton’s equivalent for the
circuit shown below.
Q.19 For the circuit shown below, calculate the value of load resistance RL for which maximum
power transfer will occur from source to load. Also calculate the maximum power.

Q.20 Determine the maximum power that can be delivered to the variable resistor R shown in
below figure.
Q.21 For the circuit shown below, obtain the Thevenin’s equivalent seen from terminals a) a-b c)
b-c.

Q.22 Fill in the following table by performing the necessary conversions. Show the step-by-step
process during the conversion

Q.23 Write the Boolean expression for the outputs F1 and F2 in the logic circuit and draw the
truth table
Q.24 Determine the Boolean expression for the outputs F1 and F2 in the logic circuit and draw
the truth table

Q.25 Draw the logic circuit and truth table for the Boolean expression shown below

Q.26 Draw the logic circuit and truth table for the Boolean function F shown below

Q.27 Draw the logic circuit and truth table for the Boolean function F shown below

****************************************************************************
For Digital assignment solve the questions Q.3, Q.10, Q.14, and Q.18

You might also like