Scribd
Upload
11 views4 pages

BEE QUESTION unit 1 and 2.

The document consists of a series of questions related to electrical engineering concepts, including Kirchhoff's laws, Norton’s equivalent circuit, Ohm's Law, and the behavior of circuit components in AC circuits. It covers topics such as power factor, impedance, resonance, and time domain analysis of RL circuits, along with practical problems involving calculations. The questions are structured to assess understanding of both theoretical principles and practical applications in electrical circuits.

Uploaded by

ssudipmishra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
11 views4 pages

BEE QUESTION unit 1 and 2.

The document consists of a series of questions related to electrical engineering concepts, including Kirchhoff's laws, Norton’s equivalent circuit, Ohm's Law, and the behavior of circuit components in AC circuits. It covers topics such as power factor, impedance, resonance, and time domain analysis of RL circuits, along with practical problems involving calculations. The questions are structured to assess understanding of both theoretical principles and practical applications in electrical circuits.

Uploaded by

ssudipmishra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

BEE QUESTION

Q1. State and explain kirchoff’s laws.

Q2. Draw Norton’s Equivalent circuit.

Q3. What is ohms Law ? Also its limitations.

Q4. An electric iron is rated 1000W, 240V. Find the current drawn resistance of the heating

element.

Q5.Draw neat circuit diagram, explain the behavior of individual components, (resistor, inductor,

capacitor) in an AC circuit.

Q6. .Find the current in 28 ohm resistor using source conversion method.

Q7. Derive the voltage and current equations in time domain for first order RL circuit.

Q8. State and explain thevenin’s theorem. Using thevenin’s theorem, determine the current flowing
through the load resistance (RL) in Figure 1.

UNIT 2

Q1.Define power factor. What is power factor of a pure capacitor?

Q2.What is the effect of frequency on inductive reactance?


Q3. In a RL series circuit a voltage of 10Vat 50Hz produces a currentof700mA while the same voltage
at75Hzproduces 500mA current. What is the value of R and Lin the circuit?

Q4.What is relation between line and phase value of voltage and current for  Star connection  Delta
connection

Q5. Define a) peak factor and b)form factor.

Q6.Define apparent power and reactive power of an AC circuit.

7.What is effect of frequency on capacitive reactance?

8.What is impedance? Give its unit.

9.A resistance of 15Ω is connected in series with an inductance of 0.02H.This combination is


connected across 200V, 50Hz supply. Calculate a) current flowing in circuit, b) power factor.

10. Differentiate between star and delta connection.

11. What is admittance? Give its units

12. A seriesRLcircuitdrawsacurrentof1A.when connected acrossa10V, 50Hz.AC supply.


Assumingtheresistance5Ω, find inductance of the circuit. What is its power factor?

13. Based on power factor, categories different types of electric loads. .Also define RMS value of AC.

14 .Give an explanation of the peak and form factor in terms of alternating currents.

15. Differentiate phase and phasor difference with example.

16. Write voltage and current relations between line and phase values for star and delta connected
three phase AC systems.

17 .Draw a sine waveform and indicate peak value, rms value and instanteous value on it.

18. Derive the relationship between voltage and current for purely inductive circuit. Also show that the
average power consumed by the circuit is zero.

19. An alternating voltage is given as v=220 sin314t ,determine it’s

a)maximum value

b)effective value

c) form factor

d)value of voltage after 0.002sec taking reckoning time from the instant when voltage is zero and
becoming positive.

e)time after which voltage attains 110V for the first time.

20. A resistance of 15 ohm and a capacitor of 150 micro farad are connected in series across a 230 V,50
Hz supply.

Estimate (a) Impedance of the circuit


(b)Current

(c) Power factor and phase angle

(d)Power consumed in the circuit.

21. Discuss the time domain analysis of first order series RL circuit with circuit diagram. 10. A series
circuit consisting of a 10Ω resistor, a 100µF capacitor and a 10mH inductor is driven by a 50Hz AC.
Voltage source of maximum value 100 volts. Calculate the equivalent impedance , current in the circuit
and the phase angle.

22. Describe the BH curve and its significance in characterizing magnetic materials.

23. Define resonance and derive relation for resonance condition in series RLC circuit.

24. Discuss the three phase transformer connections.

25. Define resonance and derive relation for resonance condition in series RLC circuit.

You might also like