AGRO POINT

HUBS

The integrated solutions

for modern agricultural
attachments

Edition
202 1
 3

AGRO POINT
HUBS

The integrated solutions for

modern agricultural attachments

Demand of today’s agricultural market is permanent increasing of

productivity respecting the environment at the same time.

Agricultural equipment should satisfy a very rigid and demandable

conditions of farmers: longer, harder and faster operating with
minimal work stops.

In order to satisfy a modern tendency in agricultural equipment

development, FKL has developed the AGRO POINT product line.
In combination with disc this bearing hub is designed to work in
various agricultural applications.

Our goal is to propose a complete range of modern hubs in order to have

a ready solutions for any agricultural machinery.

Each model of hub has a certain loading capacity and basic

dimensions but, mounting dimensions could be customer tailored
solutions.

Considering that time is the most important factor for farmers,

AGRO POINT product line is made as a long-term integrated solution
which doesn’t require maintanance or service and simply to be
replaced after its lifetime.

FKL AGRO POINT helps to reduce the lubricant consumption and its
unique sealing solution reduces possible soil contamination.

Providing the Best Solutions

AGRO POINT HUBS |
4 5

Sealing Type Overview Dirtblock Seal

DESCRIPTION DESIGN

Flange side/Open side Cross section Flange side/Open side Cross section FKL Dirtblock Seal is high-durability solution The labyrinth design effectively prevents mud
created for heavy-duty applications in harsh penetration and dissipates the heat produced
environmental and operating conditions. It is during operation. Design of hydrodynamic aid
ideal for use where grease must be held increases the pumping rate and reduces
Metal protective cap+S seal/
RS seal/3-lip seal 3-lip seal in contact with rotary shaft and bearing temperature rise and rubber wear.
assemblies, while at the same time sealing
Machine: Seed Drills Machine: Seed Drills against external contaminants is required.

S seal/ Improved Seal Rubber Multiple Lips

Double 3-lip seal+ Provides protection in very
Reduces temperature rise
Strong steel shield O-ring+S seal/ harsh working conditions
3-lip seal
Machine: Seed Drills
Machine: Seed Drills

1 2
3-lip seal/
3-lip seal 3

Machine: Seed Drills O-ring+Steel shield+S seal/ 4

Double 3-lip seal+
Strong steel shield Galvanized Sheet Metal
Protection against
Machine: Seed Drills external contaminants
3-lip seal/ High Quality Grease and internal grease
S seal+Metal Water resistant grease leakage
protective cap 6
to ensure pre-lubrication
Machine: Seed Drills
and offer better reliability
during operation 5
O-ring+Steel shield+RS seal/
RS seal+Dirtblock seal+
Forged cover plate
Steel Shield+S seal/
3-lip seal+ Machine: Disc Harrows
Forged cover plate
Machine: Seed Drills Strengthened Sealing Lip
With several bumper lips Spring Loaded Radial Seal
give better sealing and Are used to provide a
protection against mud, suitable overlap of rubber
O-Ring+Steel Shield+ water and other
O-ring+Steel Shield+S seal/ and sheet metal
RS seal/ contaminants
S seal+Dirtblock seal+
Double 3-lip seal+
Forged cover plate
Metal protective cap
Machine: Seed Drills
Machine: Disc Harrows

Specific seal design could be recommended and developed by our design engineers in order to provide the best solution
for specific application and typical environment.

| AGRO POINT HUBS AGRO POINT HUBS |

6 7

HUB Testing AGRO POINT Designation System

FKL’s engineering-design team utilizes various Testing validation of: FKL’s AGRO POINT designation system consist Prefixes and suffixes can be added to the basic
tests of AGRO POINT HUBS in order to validate - Calculated bearing life time (working hours and of an identification for the Hub type, connection designation of the Hubs.
their performance before field testings. hectares), to the disc and connection to the machine.
- Efficiency of anticorrosive protection,
Types of Testing: - Sealing effectiveness,
- Service Life (picture 1.) - Shaft tensile strength,
- Mud Slurry (picture 2.) - Inner design, Type and Size
- Salt Chamber (picture 3.) - Durability, Connection to disc
- The efficiency of complete solution. Connection to the machine

XH BX
IL XX - XX / XT - MX
00

1. Service Life Test

M - size of the thread or

inch size thread
B - bore of the bearing

Number of holes on the flange

T - Threaded
H - Without thread
00 - Without holes
2. Mud Slurry Test No pitch circle diameter

Pitch circle diameter (mm)

Size

Integrated Bearing

3. Salt Chamber Test

| AGRO POINT HUBS AGRO POINT HUBS |

8 9

A G R O P O I N T I L1 0 A G R O P O I N T I L10
T H E B E A R I N G S O LU T I O N F O R S E E D I N G M A C H I N E S , I N T E G R AT E D F L A N G E A N D S H A F T T H E B E A R I N G S O LU T I O N F O R S E E D I N G M A C H I N E S , I N T E G R AT E D F L A N G E A N D S H A F T

PRODUCT DESCRIPTION
Four-point contact ball bearing
Steel shield
Provides hermetic bearing protection
AGRO POINT IL10 offers improved hub against penetration of contaminants
solution to support producers of seeders.
Optimized internal hub design, four-point S seal
Double 3-lip seal
contact ball bearing, corrosion protected
flange made from forging and split inner
ring which allows higher load rating, make
this solution more reliable for the seed
drills operation.

A D VA N TA G E S
C= 32 kN
Co=22 kN
- Two inner rings are “connected” by small
overlap between them where the one inner ring IL10 J D H/T M L L1 F kg
is the shaft at the same time. IL10-60/6T-M16 RH 60 72 6xM8x1 M16x1.5 right hand 46.5 23 21.2 0.41
- More reliable than simply “connection“ of IL10-60/6T-M16 LH 60 72 6xM8x1 M16x1.5 left hand 44.5 23 21.2 0.41
inner ring by light metal-sheet ring.
- Could be mounted between two discs from
inside.
- Higher load rating provides longer life time.
- Integrated shaft – no needs for screw supply ADDITIONAL OPTIONS
and mounting which means easier mounting
and saving the mounting time.
G R E AT E R P R O F I T O P P O RT U N I T I E S - Different number of holes;
- Increased reliability of this solution due to - Different hole distance;
much robust inner construction. - Different shaft;
- Reduction of assembly and labor costs due
- Hole/thread option;
to easy mounting and replacement.
- Other similar modifications.
- Maximizing profit rate of the Buyer by S seal/ RS seal/
double 3-lip seal
using of high quality level unit per 3-lip seal

optimized price.

MOUNTING INSTRUCTIONS

- Hexagon screws M8x1, class 8 with helical

spring washer;
- Disc diameter: up to 400 mm;
- Required tools: Torque wrench with hexagon
socket: size 24 (M16), Torque 130 Nm.

| AGRO POINT HUBS AGRO POINT HUBS |

10 11

AGRO POINT IL20 AGRO POINT IL20

T H E B E A R I N G S O LU T I O N F O R S E E D I N G M A C H I N E S , I N T E G R AT E D F L A N G E
T H E B E A R I N G S O LU T I O N F O R S E E D I N G M A C H I N E S , I N T E G R AT E D F L A N G E
Metal protective cap
S seal Provides hermetic bearing protection
against penetration of contaminats
PRODUCT DESCRIPTION
Four-point contact ball bearing

AGRO POINT IL20 offers improved hub

solution to support producers of seeders.
Optimized internal hub design, four-point
contact ball bearing, with integrated 3-lip seal
C= 22 kN
flange gives the possibility for higher Co=15.2 kN
loads, faster and more reliable operating
of seeding machines.

Figure 1 Figure 2 Figure 3 Figure 4

Figure 5
A D VA N TA G E S IL20 J D H/T d C d1 M L L1 L2 E F kg Figure
IL20-70/6T-B12 70 80 6xM6 - - 12.2 - 32.5 25.5 25.5 - - 0.59 3
IL20-71/6T-B16 71 81 6xM8 - - 16.03 - 25.5 - 22.5 - - 0.51 2
IL20-73/6H-B16 73.5 94 6x6.4 - - 16 - 40.7 24 27 - - 0.75 3
- Extended product reliability. IL20-74/6H-B20 74 94 6x9 - - 20 - 37.7 24 18 - - 0.48 1
- Forged flange increases the rigidity of the hub IL20-75/5H-M16-R 75 94 5x6.7 - - - M16x1.5 51.7 24 - - 14 0.53 4
IL20-75/5H-M16-L 75 94 5x6.7 - - - M16x1.5-left 51.7 24 - - 14 0.53 4
and prevents deformation at mounting and IL20-75/6H-B16 75 94 6x6.4 - - 16 - 37.7 24 18 - - 0.50 1
IL20-75/6H-B17 75 94 6x6.4 - - 17 - 37.7 24 18 - - 0.50 1
operating. IL20-75/6H-B20 75 94 6x6.4 - - 20 - 37.7 24 18 - - 0.50 1
- Longer hub’s lifetime due to powerful sealing IL20-79/6H-B16 79.4 94 6x8.1 - - 16 - 24 - 24 - - 0.50 2
IL20-80/5H-M16 80 94 5x8.5 20 18.5 - M16 60.5 25.5 - 13.5 21.5 0.66 5
and higher load rating for 12% comparing to IL20-80/6H-M16 80 94 6x8.5 20 18.5 - M16 60.5 25.5 - 13.5 21.5 0.59 5
version with double row angular contact ball IL20-80/6T-M16x2 80 94 6xM8x1.25 20 18.5 - M16x2 71.6 38 - 12.4 21.2 0.73 5
IL20-82/5T-B16 82 108 5xM8 - - 16.2 - 24 - 24 - - 0.64 2
bearing in metal sheet housing PL-7520. IL20-85/6H-B20 85 95 6x6.4 - - 20 - 37.7 24 18 - - 0.48 1
IL20-92/5H-M16-R 92 108 5x6.4 - - - M16x1.5 51.7 24 - - 14 0.67 4
- Maintenance-free design helps to extend IL20-92/5H-M16-L 92 108 5x6.4 - - - M16x1.5-left 51.7 24 - - 14 0.67 4
service life and cuts operating costs.
- Corrosion protected flange surface. G R E AT E R P R O F I T O P P O RT U N I T I E S
- Hermetically pressed metal protective cap
ADDITIONAL OPTIONS
prevents penetration of dust and humidity.
- Reduction of assembly and labor costs due
to easy mounting and replacement. - 3-lip sealing on both sides is also available.
- Maximizing profit rate of the Buyer by - Design flexibility: inner diameter of the hub
using of high quality level unit per 16 mm, 17 mm and 20 mm and possibility of
optimized price. different J parameter.
3-lip seal/ 3-lip seal/
S seal 3-lip seal

MOUNTING INSTRUCTIONS

- Rivets 6 mm or 1/4”;
- Self locking class 8 hex nuts with helical
spring washer;
- Disc diameter: up to 400 mm;
- Required tools: Torque wrench with hexagon
socket: size 24 (M16), Torque 130 Nm;
size 30 (M20), Torque 200 Nm.

| AGRO POINT HUBS AGRO POINT HUBS |

12 13

AGRO POINT IL25 AGRO POINT IL25

T H E B E A R I N G S O LU T I O N F O R S E E D I N G M A C H I N E S , I N T E G R AT E D F L A N G E T H E B E A R I N G S O LU T I O N F O R S E E D I N G M A C H I N E S , I N T E G R AT E D F L A N G E

Steel shield
PRODUCT DESCRIPTION RS seal
Four-point contact ball bearing
Double 3-lip seal
Metal protective cap
AGRO POINT IL25 is FKL‘s high-performance Provides hermetic bearing protection
O-ring
solution for finger weeders, no-till and against penetration of contaminats

strip-till seeders, coulter disc blades for

seeders and marker disc blade for ploughs.
The hub is greased and sealed for the
lifetime of the bearing.

Optimized internal bearing design (double-row

angular contact ball bearing) with integrated
flange and double 3-lip sealing provides a
multiple service life of this bearing, higher
loads, faster and more reliable operating of
machines.

C= 32 kN
A D VA N TA G E S Co=22 kN

IL25 J D H/T d C M L L1 E F kg
- Longer hub‘s lifetime due to powerful
IL25-80/5H-M16 80 100 5x8.5 20 18.5 M16 73 38 13.5 21.5 0.92
sealing solution. IL25-80/5H-M16-T 80 100 5x8.5 20 18.5 M16 73 38 13.5 21.5 0.99
- Forged flange provides rigidity of the hub IL25-80/6T-M16-T-40 80 100 6xM8 20 18.5 M16 73 38 13.5 21.5 0.99
and prevents deformation at mounting and IL25-80/6T-M16-T 80 100 6xM8 20 18.5 M16 73 38 11 24 0.99
operating.
- Maintenance-free design helps to extend
service life and cut operating costs. ADDITIONAL OPTIONS
G R E AT E R P R O F I T O P P O RT U N I T I E S
- Corrosion protected flange.
- Easy mounting and replacement. - Design flexibility: the hub is available with
- A bigger load rating for 45% and 10% than IL20 - Reduction of assembly and labor costs due different J parameter, number of holes and
and IL30 hub ranges have, respectively. to easy mounting and replacement. shaft bore (with or without shaft).
- Maximizing profit rate of the Buyer by using
of high quality level unit per optimized price.
RS seal/
double 3-lip seal

MOUNTING INSTRUCTIONS

- Hexagon screws M8x1, class 8 with helical

spring washer;
- Disc diameter: up to 400 mm;
- Required tools: Torque wrench with hexagon
socket: size 24 (M16), Torque 130 Nm.

| AGRO POINT HUBS AGRO POINT HUBS |

14 15

AGRO POINT IL30 A G R O P O I N T I L 30

THE BEARING SOLUTION FOR HARSH SEEDING CONDITIONS AND COULTER DISCS OF PLOUGHS, THE BEARING SOLUTION FOR HARSH SEEDING CONDITIONS AND COULTER DISCS OF PLOUGHS,
INTEGRATED FLANGE INTEGRATED FLANGE

PRODUCT DESCRIPTION
Four-point contact ball bearing
S-Type seal 3-lip seal Double 3-lip seal
AGRO POINT IL30 is reinforced version
of IL20 for heavy duty seeding machines O-ring
working in harsh conditions and coulter discs
for ploughs as well.

It is recommended for use in NO-TILL

FARMING technology, for direct seeding
machines. That demand higher loads and
working in harsh seeding conditions. Steel shield
Steel shield O-ring
No-till farming implies way of growing crops
without disturbing the soil through tillage.
Optimized internal hub design, four-point
contact ball bearing with integrated flange, C= 29.6 kN
gives the possibility for higher loads, faster and Co=21 kN Figure 1 Figure 2 Figure 3
more reliable operating of seeders.
IL30 J D D1 H/T d C d1 M L L1 E F kg Figure
IL30-95/6H-M20 95.5 117 63 6x8.5 28 25.4 - M20 76 35 15.5 25.5 1.21 3
IL30-98/4T-B30 98 117 - 4xM12x1.25 - - 30 - - 23.8 - - 0.91 1
IL30-98/4T-M20 98 117 63 4xM8 20 17 - M20 77 40 7 30 1.14 3
IL30-98/4H-B30 98 117 - 4x10 - - 30 - - 23.8 - - 0.91 1
IL30-98/5T-B30 98 117 - 5xM12x1.5 - - 30 - - 24.8 - - 0.93 1
A D VA N TA G E S IL30-100/4T-M24x2 100 117 74 4xM10 30 27.5 - M24x2 89 42.3 18.7 28 1.51 2

- Extended product reliability. G R E AT E R P R O F I T O P P O RT U N I T I E S

- Longer hub’s life span due to powerful sealing ADDITIONAL OPTIONS
and increased load rating for 30% comparing to
IL20. - Reduction of assembly and labor costs - Standard seal design could be improved by
- Maintenance-free design helps to extend due to easy mounting and replacement. triple lip sealing on both sides or double 3-lip
service life and cut operating costs. - Maximizing profit rate of the Buyer by sealing on opposite disc side.
- Corrosion protected flange surface. using of high quality level unit per - The hub is available with different J parameter,
hole patterns and number of holes. S seal/ 3-lip seal/ S seal/
optimized price. 3-lip seal 3-lip seal double 3-lip seal

MOUNTING INSTRUCTIONS

- Bolt M12x1.25 mounting torque: 100 Nm;

- Nut torque: 300 Nm;
- Self locking class 8 hex nuts (M22 and M24)
with helical spring washer;
- Required tools: Torque wrench with hexagon
socket: size 19 (Bolts M12x1.25);
size 32 (Nut M22);
size 36 (Nut M24).

| AGRO POINT HUBS AGRO POINT HUBS |

16 17

AGRO POINT IL35 A G R O P O I N T I L 35

THE BEARING SOLUTION FOR HARSH SEEDING CONDITIONS AND COULTER DISCS OF PLOUGHS, THE BEARING SOLUTION FOR HARSH SEEDING CONDITIONS AND COULTER DISCS OF PLOUGHS,
INTEGRATED FLANGE INTEGRATED FLANGE

PRODUCT DESCRIPTION 3-lip seal

Four-point contact ball bearing
O-ring
AGRO POINT IL35 is reinforced version RS seal
of IL25 for finger weeders, no-till and Steel shield

strip-till seeders, coulter disc blades for

seeders. The hub is greased and sealed for
the lifetime of the bearing.

Optimized internal bearing design (double-row

angular contact ball bearing) with integrated
flange and combination of 3-lip sealing and
RS seal with steel shield provides a multiple
service life of this bearing, higher loads,
faster and more reliable operating of
machines.

C= 37.5 kN
Co=26.5 kN

A D VA N TA G E S IL30 J D H/T d L L2 kg
IL35-88/4T-B30 88 105 4x8x1.25 30 55 42 1

- Extended product reliability.

- Longer hub‘s lifetime due to powerful
sealing solution.
- Forged flange provides rigidity of the hub
and prevents deformation at mounting and ADDITIONAL OPTIONS
G R E AT E R P R O F I T O P P O RT U N I T I E S
operating.
- Maintenance-free design helps to extend - The hub is available with different J parameter,
service life and cut operating costs. hole patterns and number of holes.
- Reduction of assembly and labor costs
- Corrosion protected flange.
due to easy mounting and replacement.
- Easy mounting and replacement.
- Maximizing profit rate of the Buyer by
- A bigger load rating for 17% than IL25 has
using of high quality level unit per 3-lip seal/
respectively. RS seal
optimized price.

MOUNTING INSTRUCTIONS

- Bolt M8x1.25 mounting torque: 100 Nm;

- Nut torque: 300 Nm;
- Self locking class 8 hex nuts (M22 and M24)
with helical spring washer;
- Required tools: Torque wrench with hexagon
socket: size 30 (Nut M20);
size 32 (Nut M22).

| AGRO POINT HUBS AGRO POINT HUBS |

18 19

A G R O P O I N T I L4 0 A G R O P O I N T I L40
I N T E G R AT E D F L A N G E , M A I N T E N A N C E F R E E B E A R I N G I N T E G R AT E D F L A N G E , M A I N T E N A N C E F R E E B E A R I N G
Steel shield
Double row angular contact ball bearing
RS seal
PRODUCT DESCRIPTION Dirtblock seal
Forged cover plate
O-ring

AGRO POINT IL40 is FKL‘s high performance

solution for disc harrows, greased and sealed
for the lifetime of the hub.
Optimized internal hub design, double row
angular contact ball bearing, with integrated
flange and Dirtblock sealing option provide
extended service life and significantly improved
contamination exclusion than the conventional
solutions have.

A D VA N TA G E S
C= 42.9 kN
Co=36.3 kN Figure 1 Figure 2
- Longer hub‘s lifetime due to powerful IL40 J D H/T d C M G L L1 E F kg Figure
Dirtblock sealing. IL40-98/4T-M22 98 117 4xM12x1.25 27.95 25.4 M22x1.5 - 102 60 17 25 2.16 2
- Higher impact resistance from flange side of IL40-98/5T-M22 98 117 5xM12x1.25 27.95 25.4 M22x1.5 - 102 60 17 25 2.16 2
IL40-98/6T-M22 98 117 6xM12x1.25 27.95 25.4 M22x1.5 - 102 60 17 25 2.16 2
the hub due to the thicker forged cover.
IL40-98/4T-M24 98 117 4xM12x1.25 30 27.5 M24x2 - 106 60 17 29 2.16 2
- Maintenance-free design helps to extend IL40-98/5T-M24 98 117 5xM12x1.25 30 27.5 M24x2 - 106 60 17 29 2.20 2
service life and cut operationg costs. IL40-98/6T-M24 98 117 6xM12x1.25 30 27.5 M24x2 - 106 60 17 29 2.20 2
- Corrosion protected flange surface. IL40-100/6T-M20x1.5 100 117 6xM10 34 31 M20x1.5 M20x1.5 69 55 14 26 2 1

- Easy mounting and replacement.

ADDITIONAL OPTIONS

R E CO M M E N D E D W O R K I N G CO N D I T I O N S G R E AT E R P R O F I T O P P O RT U N I T I E S - Design flexibility: the hub is available with

different J parameter, hole patterns and
number of holes.
- Tractor speed: 5-20 km/h - Reduction of assembly and labor costs due - Aftermarket kit is also available optionally:
- Temperature range: -20 to +50 C to easy mounting and replacement. Agro Point bearing, bolts M12x1.25, special
- Disc diameter: from 400 to 560 mm - Maximizing profit rate of the Buyer by locking spring washer, nut M22x1.5.
using of high quality level unit per optimized RS seal/
Dirtblock seal
Note: for discs from 500 to 560 mm elastic price.
suspension is mandatory.

MOUNTING INSTRUCTIONS

- Bolt M12x1.25 mounting torque: 100 Nm.

- Nut torque: 300 Nm.
- Self locking class 8 hex nuts (M22 and M24)
with helical spring washer.
- Required tools: Torque wrench hexagon
socket: size 19 (Bolts M12x1.25);
size 32 (Nut M22);
size 36 (Nut M24).

| AGRO POINT HUBS AGRO POINT HUBS |

20 21

A G R O P O I N T I L4 0 M A G R O P O I N T I L40 M
I N T E G R AT E D F L A N G E , M A I N T E N A N C E F R E E B E A R I N G I N T E G R AT E D F L A N G E , M A I N T E N A N C E F R E E B E A R I N G

Steel shield
Double row angular contact ball bearing
PRODUCT DESCRIPTION RS seal
Dirtblock seal
Forged cover plate
AGRO POINT IL40M is modified solution of IL40 O-ring
hub for disc harrows, greased and sealed for the
lifetime of the hub.
Bigger and stronger integrated flange,
optimized internal hub design, double
row angular contact ball bearing, with
integrated flange and Dirtblock sealing
option provide extended service life and
significantly improved contamination exclusion
than the conventional solutions have.

A D VA N TA G E S C= 42.9 kN
Co=36.3 kN Figure 1 Figure 2
- Longer hub‘s lifetime due to powerful IL40M J D H/T d C M G L L1 E F kg Figure
Dirtblock sealing. IL40-104/5T-M22x1.5-01 104 145 5xM12x1.25 27.95 25.4 M22x1.5 - 101 55 21 25 2.48 2
- Higher impact resistance and more robust IL40-108/5T-M22x1.5 108 145 5xM12x1.25 27.95 25.4 M22x1.5 - 102 60 17 25 2.70 2
IL40-110/4H-M24x1.5 110 145 4x13 24 22.5 M24x1.5 - 129 74 20 35 2.81 2
solution than IL40 type. IL40-110/4H-M30x2 110 145 4x13 34.9 32.4 M30x2 - 134 76 20 38 3.20 2
- Maintenance-free design helps to extend IL40-110/6H-M22x1.5 110 145 6x10.5 28 25.4 M22x1.5 - 110 60 17 33 2.62 2
service life and cut operationg costs. IL40-112/5T-M24x2 112 145 5xM12x1.5 30 28 M24x2 - 101 55 21 25 2.48 2
- Corrosion protected flange surface. IL40-115/5H-M22x1.5 115 145 5x13 28 25.5 M22x1.5 - 101 55 18 28 2.48 2
IL40-120/4H-M22x1.5 120 145 4x11 28 25.4 M22x1.5 - 110 60 17 33 2.79 2
- Easy mounting and replacement.
IL40-127/4T-3/4-16UNF 127 145 4x1/2”-13UNC 31.8 29 - 3/4”-16 UNF 71.5 60 11.5 38.1 2.50 1

ADDITIONAL OPTIONS

R E CO M M E N D E D W O R K I N G CO N D I T I O N S G R E AT E R P R O F I T O P P O RT U N I T I E S - Design flexibility: the hub is available with

different J parameter, hole patterns and
number of holes.
- Tractor speed: 5-20 km/h - Reduction of assembly and labor costs due - Aftermarket kit is also available optionally:
- Temperature range: -20 to +50 C to easy mounting and replacement. Agro Point bearing, bolts M12x1.25, special
- Disc diameter: from 500 to 610 mm - Maximizing profit rate of the Buyer by locking spring washer, nut M22x1.5.
using of high quality level unit per optimized RS seal/
Dirtblock seal
Note: for discs from 560 to 610 mm elastic price.
suspension is mandatory.

MOUNTING INSTRUCTIONS

- Bolt M12x1.25 mounting torque: 100 Nm;

- Nut torque: 300 Nm;
- Self locking class 8 hex nuts (M22 and M24)
with helical spring washer;
- Required tools: Torque wrench
hexagon socket: size 19 (Bolts M12x1.25);
size 32 (Nut M22);
size 36 (Nut M24).

| AGRO POINT HUBS AGRO POINT HUBS |

22 23

A G R O P O I N T I L 50 A G R O P O I N T I L 50
I N T E G R AT E D F L A N G E , M A I N T E N A N C E - F R E E B E A R I N G F O R I N D E P E N D E N T D I S C S I N T E G R AT E D F L A N G E , M A I N T E N A N C E - F R E E B E A R I N G F O R I N D E P E N D E N T D I S C S

Steel shield
Double row angular contact ball bearing
PRODUCT DESCRIPTION RS seal F
Dirtblock seal
Forged cover plate
AGRO POINT IL50 is FKL’s high performance O-ring
solution for disc harrows. The hubs are greased
and sealed for the lifetime of the hub.

Optimized internal hub design, double row Figure 2

angular contact ball bearing, with integrated J
flange and Dirtblock sealing option provide
extended service life and significantly improved
contamination exclusion than the conventional
solutions have.

A D VA N TA G E S
C= 60 kN
Co=45.8 kN Figure 1 Figure 3
- Longer hub’s life span due to the
IL50 J D H/T d C d2 M L L1 E F kg Figure
powerful Dirtblock sealing and 30% higher
IL50-98/4T-M22 98 117 4xM12x1.25 27.95 25.4 - M22x1.5 102 60 17 25 2.51 1
load rating comparing to IL40 and other IL50-98/5T-M22 98 117 5xM12x1.25 27.95 25.4 - M22x1.5 102 60 17 25 2.50 1
competitive hubs from the same range. IL50-98/6T-M22 98 117 6xM12x1.25 27.95 25.4 - M22x1.5 102 60 17 25 2.51 1
- Maintenance-free design helps to extend IL50-98/6T-M22-113 98 117 6xM12x1.25 27.95 25.4 - M22x1.5 113 60 28 25 2.54 1
service life and cut operating costs. IL50-98/4T-M24 98 117 4xM12x1.25 30 27.5 - M24x2 106 60 17 29 2.55 1
IL50-98/5T-M24 98 117 5xM12x1.25 30 27.5 - M24x2 106 60 17 29 2.55 1
- Corrosion protected flange surface. IL50-98/6T-M24 98 117 6xM12x1.25 30 27.5 - M24x2 106 60 17 29 2.51 1
- Easy mounting and replacement. IL50-98/4T-B30-F 98 117 4xM12x1.25 - - 45 - - 61 - - 1.87 2
IL50-98/4T-B30-J 98 117 4xM12x1.25 - - - - - 60 - - 1.96 3
IL50-100/4T-1” 100 117 4xM10 30 27.95 - 1” SAE14h 125 60 36 29 2.67 1
IL50-100/6T-M24.R 100 117 6xM10x1.25 30 27 - M24x1.5 97.5 60 15.5 22 2.51 1
IL50-100/6T-M24.L 100 117 6xM10x1.25 30 27 - M24x1.5-Left 97.5 60 15.5 22 2.51 1
R E CO M M E N D E D W O R K I N G CO N D I T I O N S G R E AT E R P R O F I T O P P O RT U N I T I E S IL50-103/5T-M22 103 119 5xM12x1.25 27.95 25.4 - M22x1.5 102 60 17 25 2.51 1

ADDITIONAL OPTIONS
- Tractor speed: 5 ÷ 20 km/h - Reduction of assembly and labor costs due
- Temperature range: -20 ÷ +50°C to easy mounting and replacement. - Design flexibility: the hub is available with
- Disc diameter: from 560-710 mm - Maximizing profit rate of the Buyer by different J parameter, hole patterns and
number of holes.
using of high quality level unit per optimized
- Aftermarket kit is also available optionally:
price.
Agro Point bearing, bolts M12x1.25, special
locking spring washer, nut M22x1.5.
RS seal/
Dirtblock seal

MOUNTING INSTRUCTIONS

- Bolt M12x1.25 mounting torque: 100 Nm.

- Nut torque: 300 Nm.
- Self locking class 8 hex nuts (M22 and M24)
with helical spring washer.
- Required tools: Torque wrench hexagon
socket: size 19 (Bolts M12x1.25);
size 32 (Nut M22);
size 36 (Nut M24).

| AGRO POINT HUBS AGRO POINT HUBS |

24 25

A G R O P O I N T I L 50 M A G R O P O I N T I L 50 M
I N T E G R AT E D F L A N G E , M A I N T E N A N C E - F R E E B E A R I N G F O R I N D E P E N D E N T D I S C S I N T E G R AT E D F L A N G E , M A I N T E N A N C E - F R E E B E A R I N G F O R I N D E P E N D E N T D I S C S

PRODUCT DESCRIPTION
Steel shield
Double row angular contact ball bearing
AGRO POINT IL50M is modified solution RS seal
of IL50 for disc harrows. The hubs are greased Dirtblock seal
and sealed for the lifetime of the hub. Forged cover plate
O-ring
Bigger and more robust flange, optimized
internal hub design, double row angular
contact ball bearing, with integrated flange
and Dirtblock sealing option provide extended
service life and significantly improved
contamination exclusion than the conventional
solutions have.

A D VA N TA G E S
C= 60 kN
- Longer hub’s life span due to the Co=45.8 kN Figure 1 Figure 2
powerful Dirtblock sealing and 30% higher
load rating comparing to IL40M and other IL50M J D H/T d C M G L L1 E F kg Figure
competitive hubs from the same range. IL50-105/4H-M24x1.5-RH 105 145 4x12.3 30 27 M24x1.5-RH - 97.5 60 15.5 22 3.10 2
IL50-105/4H-M24x1.5-LH 105 145 4x12.3 30 27 M24x1.5-LH - 97.5 60 15.5 22 3.10 2
- Maintenance-free design helps to extend
IL50-112/5T-M24x2 112 145 5xM12x1.25 30 28 M24x2 - 106 60 20 26 3.02 2
service life and cut operating costs. IL50-115/5H-M22 115 145 5x13 27.95 25.4 M22x1.5 - 102 60 17 25 2.95 2
- Corrosion protected flange surface. IL50-120/6H-M24x1.5 120 145 6x13 30 27 M24x1.5 - 97.5 60 15.5 22 2.96 2
- Easy mounting and replacement. IL50-122/6T-M20x1.5 122 145 6xM12x1.25 31.8 29 - M20x1.5 75 60 15 26 2.99 1
IL50-127/4H-3/4-16UNF 127 145 4x13.5 31.8 29 - 3/4”–16UNF 71.5 60 11.5 38.1 2.82 1

G R E AT E R P R O F I T O P P O RT U N I T I E S ADDITIONAL OPTIONS
R E CO M M E N D E D W O R K I N G CO N D I T I O N S

- Design flexibility: the hub is available with

- Tractor speed: 5 ÷ 20 km/h - Reduction of assembly and labor costs due different J parameter, hole patterns and
- Temperature range: -20 ÷ +50°C to easy mounting and replacement. number of holes.
- Disc diameter: from 630-710 mm - Maximizing profit rate of the Buyer by - Aftermarket kit is also available optionally:
using of high quality level unit per optimized Agro Point bearing, bolts M12x1.25, special
locking spring washer, nut M22x1.5.
price.
RS seal/
Dirtblock seal

MOUNTING INSTRUCTIONS

- Bolt M12x1.25 mounting torque: 100 Nm.

- Nut torque: 300 Nm.
- Self locking class 8 hex nuts (M22 and M24)
with helical spring washer.
- Required tools: Torque wrench hexagon
socket: size 19 (Bolts M12x1.25);
size 32 (Nut M22);
size 36 (Nut M24).

| AGRO POINT HUBS AGRO POINT HUBS |

26 27

A G R O P O I N T I L 60 AGRO POINT IL60

M A I N T E N A N C E - F R E E B E A R I N G W I T H I N T E G R AT E D F L A N G E F O R H A R S H T I L L A G E M A I N T E N A N C E - F R E E B E A R I N G W I T H I N T E G R AT E D F L A N G E F O R H A R S H T I L L A G E
Steel shield
Double row angular contact ball bearing
S seal
PRODUCT DESCRIPTION Dirtblock seal

Forged cover plate

AGRO POINT IL60 is designed as a heavy duty O-ring
option of standard size IL50 for harsh tillage
and larger disc diameter.
Combination of larger components and
reliable Dirtblock seal provides the hub
operating at higher loads and tillage speeds
as well.
AGRO POINT IL60 with integrated flange is
greased and sealed for the lifetime with
Dirtblock sealing option provide extended
service life and significantly improved
contamination exclusion than the conventional C= 66.35 kN
solutions have. Co=56.5 kN Figure 1 Figure 2
IL60 J D H/T d C M G L L1 E F kg Figure
IL60-00-M20X1.5 - 160 blank 31 34.9 - M20X1.5 78 63 - 40 4.2 1
IL60-120/4H-M20 120 160 4x11 34 31 - M20 96 82 - 14 4.35 1
A D VA N TA G E S IL60-122/6H-M24 122 160 6x12 35 32.5 M24x2 - 106.5 63 16.5 27 4.20 2
IL60-130/6T-M24 130 160 6xM12x1.25 30 28 M24x2 - 121 63 24.5 33.5 4.10 2
IL60-130/6T-M27 130 160 6xM12x1.25 36 33.5 M27x2 - 117.5 63 21 33.5 4.40 2
- 11% higher load rating comparing to IL60-130/6T-M30-03 130 160 6xM12x1.25 40 37 M30x1.5 - 124 63 32 29 4.40 2
standard hub size IL50. IL60-130/6T-M30-112-03 130 160 6xM12x1.25 40 37 M30x1.5 - 112 63 20 29 4.40 2
- 31% larger shaft diameter comparing to IL60-133/4H-3/4-16UNF 133.35 160 4x13.5 31 34.9 - 3/4”-16UNF 78 63 - 40 4.10 1
IL60-140/5T-M27 140 160 5xM12x1.25 36 33.5 M27x2 - 117.5 63 21 33.5 4.40 2
standard hub size IL50. IL60-140/5H-M30 140 160 5x13 35 32.5 M30x1.5 - 110.5 63 19.5 26 4.30 2
- Maintenance-free design helps to extend IL60-140/6T-M27 140 160 6xM12x1.25 36 33.5 M27x2 - 117.5 63 21 33.5 4.40 2
service life and cut operating costs. IL60-145/4H-M27x2.A-RH 145 180 4x17 - - - M27x2-7H right 108 71 - - 5.52 1
IL60-145/4H-M27x2.A-LH 145 180 4x17 - - - M27x2-7H left 108 71 - - 5.52 1
- Corrosion protected flange surface. G R E AT E R P R O F I T O P P O RT U N I T I E S IL60-150/6T-M24 150 180 6xM12x1.25 30 28 M24x2 - 121 63 24.5 33.5 4.5 2
- Easy mounting and replacement.
ADDITIONAL OPTIONS
R E CO M M E N D E D W O R K I N G - Reduction of assembly and labor costs due - Design flexibility: the hub is available with
CO N D I T I O N S to easy mounting and replacement. different J parameter, hole patterns and
- Maximizing profit rate of the Buyer by number of holes.
using of high quality level unit per - Aftermarket kit is also available optionally:
- Tractor speed: 5 ÷ 20 km/h Agro Point bearing, bolts M12x1.25, special
optimized price.
- Temperature range: -20 ÷ +50°C locking spring washer, nut M22x1.5.
S seal/Dirtblock seal
- Disc diameter: over 710 mm

MOUNTING INSTRUCTIONS

- Bolt M12x1.25 mounting torque: 100 Nm.

- Nut torque: 400 Nm.
- Self locking class 8 hex nuts (M24 and M27)
with helical spring washer.
- Required tools: Torque wrench with hexagon
socket: size 19 (Bolts M12x1,25);
size 36 (Nut M24);
size 41 (Nut M27).

| AGRO POINT HUBS AGRO POINT HUBS |

28 29

A G R O P O I N T I L70 A G R O P O I N T I L70
M A I N T E N A N C E - F R E E B E A R I N G W I T H I N T E G R AT E D F L A N G E F O R H A R S H T I L L A G E M A I N T E N A N C E - F R E E B E A R I N G W I T H I N T E G R AT E D F L A N G E F O R H A R S H T I L L A G E

Steel shield
RS seal
PRODUCT DESCRIPTION Double row angular contact ball bearing
Dirtblock seal
Forged cover plate
AGRO POINT IL70 is designed as a heavy duty
O-ring
option of standard size IL60 for harsh tillage and
larger disc diameter.
Combination of larger components and
reliable Dirtblock seal provides the hub
operating at higher loads and tillage speeds as
well.
AGRO POINT IL70 with integrated flange is
greased and sealed for the lifetime with
Dirtblock sealing option provide extended
service life and significantly improved
contamination exclusion than the conventional
solutions have.

C= 94.45 kN
A D VA N TA G E S Co=77.88 kN

IL70 J D d H/T M L L1 kg
- 42% higher load rating comparing to IL70-180/6H-M30 180 212 34 6x15 M30x2 144.5 70 7.5
standard hub size IL60.
- 7% larger shaft diameter.
- Maintenance-free design helps to extend
service life and cut operating costs.
- Corrosion protected flange surface. ADDITIONAL OPTIONS
- Easy mounting and replacement. G R E AT E R P R O F I T O P P O RT U N I T I E S - Design flexibility: the hub is available with
different J parameter, hole patterns and
number of holes.
R E CO M M E N D E D W O R K I N G - Aftermarket kit is also available optionally:
- Reduction of assembly and labor costs due
CO N D I T I O N S Agro Point bearing, special locking spring
to easy mounting and replacement. washer, nut M30x2.
- Maximizing profit rate of the Buyer by
- Tractor speed: 5 ÷ 20 km/h using of high quality level unit per RS seal/
- Temperature range: -20 ÷ +50°C optimized price. Dirtblock seal
- Disc diameter: over 710 mm

MOUNTING INSTRUCTIONS

- Nut torque: 400 Nm.

- Self locking class 8 hex nuts (M30 and M33)
with helical spring washer.
- Required tools: Torque wrench with hexagon
socket: size 46 (Nut M30);
size 50 (Nut M33).

| AGRO POINT HUBS AGRO POINT HUBS |

30 31

FKL HUBS WITH LOCKING SPRING WASHER FKL HUBS WITH LOCKING SPRING WASHER
INSTRUCTIONS FOR INSTALLATION INSTRUCTIONS FOR INSTALLATION

PRODUCT DESCRIPTION

FKL Hubs for seeding and tillage

equipment are designed to operate in the
most difficult working conditions. The hubs
are lubricated for life, sealed and protected
against corrosion and therefore does not
require any additional maintenance. A
complex sealing system protects the hub Figure 1 Figure 2
from penetration of water and all other
Designation J D H/T d C M L L1 E F R R1 kg Figure
contaminants at all weather conditions as IL20-75/4H-M20x1.5-T-44 75 94 4x8.5 25 23 M20x1.5 61 26 15 20 - - 0.77 1
well as during its entire lifetime. IL20-75/6T-M20x1.5-T-44 75 94 6xM6 25 23 M20x1.5 61 26 15 20 - - 0.77 1
IL40-98/5H-M22-04 98 117 5x12.5 27.95 25.4 M22x1.5 108.5 60 16 29 - - 2.36 2
IL50-98/6T-M24x2-04 98 117 6xM12x1.75 32 29.6 M24x2 111 60 20 27 - - 2.83 2
IL50-120/4T-M24x2-04 120 145 4xM10x1.5 30 27.8 M24x2 111 60 20 27 - - 3.30 2
PRODUCT 3D VIEW IL50-120/6T-M24x2-04-R633 120 145 6xM12x1.75 30 27.8 M24x2 129.2 63.2 35 27 - 633 3.61 2
IL50-120/6T-M24x2-04-R633-114 120 145 6xM12x1.75 30 27.8 M24x2 114.2 63.2 20 27 - 633 3.53 2
IL50-120/6T-M24x2-04-R635-149 120 145 6xM12x1.75 30 27.8 M24x2 149.2 63.2 56 27 635 - 3.57 2
IL60-130/6T-M27-44 130 160 6xM12x1.25 35 32.5 M27x2 120 63 25 25.7 - - 4.32 2
IL60-140/5H-M30-44 140 160 5x13 35 32.5 M30x1.5 110.5 63 16 28 - - 4.29 2

A D VA N TA G E S *

- No “D” shape hole required - only two

drilled holes: one hole to fit the shaft
diameter and another hole with 9 mm
diameter for the washer fitting.
- Machining the Disc Arm with a simple
tool. R E CO M M E N D AT I O N Recommended tightening torque for the bolts:
- Provides sufficient axial force for proper
M M6 M8 M10 M12 M16
hub operation throughout its lifetime. * Recommended Shaft and Hole tolerances Nm 16 28 56 98 175
The special FKL spring washer prevents the
- Proper hub installation extends signifi- according to ISO standard are C10/h10.
shaft turning at the nut tightening and due to Recommended tightening torque for nuts for
cantly its lifetime. For basic sizes: 28÷40
its spring properties provides 6 tons of axial the mounting to the machine frame:
C10=+0.194/+0.11 M
clamping force. M22 M24 M27 M30 M33
h10=0/-0.084 Nm 300 300 400 400 400

MOUNTING INSTRUCTIONS

- The user must maintain the flatness of the - Nuts for mounting the hub to the machine
disc arm plate within 0.2 mm on the both side. frame and the disc connection bolts must be
Variation of thickness must be in tolerance tightened with an appropriate torque.
according to standards.
| AGRO POINT HUBS AGRO POINT HUBS |
 FACTORY OF ROLLING BEARINGS
AND CARDAN SHAFTS
Industrial zone bb
21235 Temerin
SERBIA

AGRO POINT
HUBS

Head of Sales +381 21 6841 222

Sales Managers
(Foreign Markets) +381 21 6841 205
+381 21 6841 201
+381 21 6841 190

(Inland Market) +381 11 3610 833

+381 21 6841 231
+381 21 6841 188
+381 21 6841 187

Marketing +381 21 6841 208

Copyright © 2021 FKL. All rights reserved.

These contents are the copyright of the publisher and may not be reproduced, in total or partially, without express consent of the publisher. Every precautions were taken to ensure the accuracy of
the information in this publication but no liability can be accepted for any errors or omissions. Prepared by FKL DOO Temerin, Serbia.
Editor in Chief: Ljiljana Marić; Copy Editors: Laslo Koman, Dejan Zrilić, Biljana Obrenović, Nina Đaković, Milan Mijušković
Photos, Layout and Prepress: Jasenka Martinović and Monja Madić
Print: Stojkov, August 2021.