Scribd
Upload
2 views

Assignment 1 PCS

This document outlines the assignment for the Principles of Communication Systems course, detailing ten questions related to amplitude modulation, frequency modulation, and various modulation schemes. Each question requires explanations, derivations, and calculations, focusing on concepts such as spectral equations, modulation indices, and receiver operations. The assignment is due on March 21, 2025, and is aimed at enhancing understanding of communication principles.

Uploaded by

mithrashishir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
2 views

Assignment 1 PCS

This document outlines the assignment for the Principles of Communication Systems course, detailing ten questions related to amplitude modulation, frequency modulation, and various modulation schemes. Each question requires explanations, derivations, and calculations, focusing on concepts such as spectral equations, modulation indices, and receiver operations. The assignment is due on March 21, 2025, and is aimed at enhancing understanding of communication principles.

Uploaded by

mithrashishir
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Assignment 1

Principles of Communication systems (BEC402)


Semester: 4th Section: A
Issue: 17/3/2025 Due: 21/3/2025
Sl. Question BLT CO
No.
1 Define standard form of amplitude modulation, derive its equation L2 CO1
and explain each term. Derive the Spectral equation of AM wave and
hence draw and explain the AM spectrum for Single tone message
signal.
2 Explain in detail the working of switching modulator with the help of L2 CO1
necessary diagrams, waveforms and derivations.
3 An audio frequency signal, 5 cos ( 2 π 103 t ) ,is used to amplitude L3 CO1

modulate a carrier signal100 cos ( 2 π 106 t ), Assume modulation index


of 0.4. Find i) Sideband frequencies ii) Bandwidth required iii) Total
transmitted power iv) Efficiency.
4 Describe DSBSC modulation scheme. Express DSBSC in time and L2 CO1
frequency domain.
5 With necessary diagrams, waveforms and equations explain the L2 CO1
working of Ring modulator
6 A carrier signal 93.5 MHz is FM modulated with a message signal of L3 CO2
bandwidth 5kHz. The maximum deviation is found to be 40kHz,
calculate a) Carrier Swing b) Lowest and highest frequency
component in FM c) Modulation index d) Bandwidth of FM output.
7 Discuss the advantages and disadvantages of Frequency Modulation. L2 CO2
8 The input to an FM receiver has an S/N of 2.8. The modulating L3 CO2
frequency is 1.5 kHz. The maximum permitted deviation is 4 kHz.
What are (a) the frequency deviation caused by the noise and (b) the
improved output S/N?
9 With a neat block diagram explain the operation of a Super- L2 CO2
heterodyne receiver.
10 Explain voltage control oscillator frequency modulator with neat L2 CO2
diagram.

You might also like