Scribd
Upload
2 views1 page

Machine Efficiency

The document lists various machines along with their efficiency percentages, previous faults, and the probability of repetition of those faults. Most machines report high efficiency, with some requiring monitoring or maintenance due to past issues. Notable concerns include the PECVD machine with a 70% efficiency and the second screen printing machine at 62%, both indicating the need for further attention.

Uploaded by

M.elazab Mohamed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2 views1 page

Machine Efficiency

The document lists various machines along with their efficiency percentages, previous faults, and the probability of repetition of those faults. Most machines report high efficiency, with some requiring monitoring or maintenance due to past issues. Notable concerns include the PECVD machine with a 70% efficiency and the second screen printing machine at 62%, both indicating the need for further attention.

Uploaded by

M.elazab Mohamed
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

machines machine efficiency % Previous faults Probability of repetition

1 Texturing 100 no faults until now


no , but maybe some lakeage Under the boxes

2 Drying machine 100 no faults until now


no , but need to cheak the oil
change one fuse due to the hige temperature in furnace.
3 Diffusion 85 maybe , and need Weekly monitoring
because of the cold water unit had been stopped (no water in the island)
for cold water unit
the pump stopped one time because of there was
4 Plasma etching 87 sblockage in the nitrogen line. no

5 Removing PSG 85 some leakage outside the machine because the drain line was blocked no , and need to monthly purging for
the drain pathway

6 PECVD 70 some problems in special gass valves


yes , and some other problems

7 Frist screen printing

Problems in some Conveyor belts and the compressed air system in addition to
8 Seconed screen printing 62 yes , and some other problems
the problem in the software of the machine

9 3th screen printing

10 Testing & sorting 90 new problem in CDA input valves of the machine
still solving it

11 Manual cell welding 95 no faults until now


no , but we need some arrangements

12 Manual string welding 100 no faults until now no , but we will make suction pins to
hold the cell

13 Layup 95 no faults until now no , need some tools amd training to replace
one cell in the strinhg
no faults until now but we need to make door no , but we need to make door
14 EL test 90 above the panel to reduce the light above the panel to reduce the light

15 Lamination 100 no faults until now just Preventive maintenance no , need Weekly monitoring for
Oil level in each pump

16 Fraiming 85 there was a problem in compressed air system but now it works good
no , need some tools for selicon gun

17 V I test for module 100 no faults until now


no ,

You might also like