Scribd
Upload
3 views6 pages

PROKON 1-2-7 (1)

The document presents the results of a structural analysis performed by Software Consultants (Pty) Ltd, detailing load cases and their effects on a beam structure. It includes nodal displacements, reactions at ultimate and serviceability limit states, and axial forces for various load combinations. The analysis indicates maximum deflections and reactions at specified nodes under different load scenarios.

Uploaded by

eliezer
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
3 views6 pages

PROKON 1-2-7 (1)

The document presents the results of a structural analysis performed by Software Consultants (Pty) Ltd, detailing load cases and their effects on a beam structure. It includes nodal displacements, reactions at ultimate and serviceability limit states, and axial forces for various load combinations. The analysis indicates maximum deflections and reactions at specified nodes under different load scenarios.

Uploaded by

eliezer
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

Job Number Sheet

Job Title
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com
E-Mail : [email protected] Calcs by Checked by Date

============================= LOAD CASE L ================================

*** BEAM ELEMENT LOADS ***

Element Dir P a Wl Wr a(left) Length dT


kN m kN/m kN/m m m °C

1-2 Y 0.00 0.000 -6.00 -6.00 0.00 0.90 0.00

============================= LOAD COMBINATIONS ===============================

Load Comb Description

C1

Comb. Load factor for each load case: Ultimate Limit State

D L

C1 1.40 1.60

Comb. Load factor for each load case: Serviceability Limit State

D L

C1 1.00 1.00

========================== OWN WEIGHT ACCELERATIONS ===========================

Direction Acceleration (g)


X 0.00
Y -1.00
Z 0.00

========================== OUTPUT: LINEAR ANALYSIS ============================


====================== NODAL POINT DISPLACEMENTS at SLS =======================

Node Lcase X-disp. Y-disp Z-rot.


mm mm rad.

1 D 0.00 0.00 0.0002


L 0.00 0.00 0.0013
C1 0.00 0.00 0.0015
2 D -0.01 -0.05 -0.0002
L -0.06 -0.37 -0.0013
C1 -0.07 -0.42 -0.0015
3 D 0.00 0.00 0.0000
L 0.00 0.00 -0.0001
C1 0.00 0.00 -0.0002

============================== REACTIONS AT ULS ===============================


(In rotated axes where applicable)
Note:Only load combinations have ULSses = 1

Node Lcase X-force Y-forcet Z-moment


kN kN kNm

1 D 0.94 0.38 0.00


L 6.94 2.89 0.00
C1 12.42 5.15 0.00
3 D -0.94 0.36 0.00
L -6.94 2.51 0.00
C1 -12.42 4.52 0.00

EQUILIBRIUM CHECK AT ULS:

LC APPLIED LOADS & MOMENTS about (0.0,0.0,0.0) in global axes

Sum of: Px Py Mz

D 0.00 -0.74 -0.34


L 0.00 -5.40 -2.43
C1 0.00 -9.68 -4.36

LC REACTIONS & REACTION MOMENTS about (0.0,0.0,0.0) in global axes

Sum of: Rx Ry MRz


Job Number Sheet
Job Title
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com
E-Mail : [email protected] Calcs by Checked by Date

D 0.00 0.74 0.34


L 0.00 5.40 2.43
C1 0.00 9.68 4.36

================== REACTIONS AT SLS (Combinations only) =======================

(In rotated axes


Node Lcase X-force Y-forcet Z-moment
kN kN kNm

1 C1 7.88 3.27 0.00


3 C1 -7.88 2.87 0.00

============ BEAM ELEMENT END FORCES IN LOCAL ELEMENT AXES at ULS ==============

Elem Lcase Axial Y-Shea M-xx Axial Y-Shea M-xx


kN kN kNm kN kN kNm

1-2 D -0.72 0.38 0.05 0.72 0.32 -0.03


L -5.32 2.89 0.40 5.32 2.51 -0.24
C1 -9.51 5.14 0.72 9.51 4.48 -0.42
2-3 D 0.79 -0.04 -0.03 -0.80 0.07 -0.02
L 5.87 -0.42 -0.24 -5.87 0.42 -0.17
C1 10.49 -0.73 -0.42 -10.50 0.76 -0.30
1-3 D -0.01 0.22 0.05 -0.01 -0.22 0.02
L 0.00 1.63 0.40 0.00 -1.63 0.17
C1 -0.01 2.91 0.72 -0.01 -2.91 0.30

============================== STATISTICAL DATA ===============================

Weights of beam elements: (Added to load case D)

Section Designation Total Mass


(kN) (kg)

7 50x50x2.0 S1 0.065 6.6


---------------------
0.065 6.6

Total weight of structure = 0.06 kN

No. of real numbers in Stiffness matrix = 0 (0 bytes)


Time used to analyse = 0: 0:0.006 seconds
Total number of : Nodes = 3
Beam Elements = 3
Cable Elements = 0
Shell Elements = 0
Supports = 2
Section Properties = 1
Load Cases = 2
Load Combinations = 1

=============================== END OF OUTPUT =================================


Job Number Sheet
Job Title
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com
E-Mail : [email protected] Calcs by Checked by Date

Deflections for Load Case C1

Maximum Deflections for Load Combination C1:


X :-0.07 mm at node 2 1
Y :-0.42 mm at node 2
Y

3 X

Deflections for Load Case D

Maximum Deflections for Load Case D:


X :-0.01 mm at node 2 1
Y :-0.05 mm at node 2
Y

3 X
Job Number Sheet
Job Title
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com
E-Mail : [email protected] Calcs by Checked by Date

Deflections for Load Case L

Maximum Deflections for Load Case L:


X :-0.06 mm at node 2 1
Y :-0.37 mm at node 2
Y

3 X

Reactions for Load Combination C1

Reactions: Load Comb :C1


12.42 1

Y 5.151

3 -12.42
X

4.524
Job Number Sheet
Job Title
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com
E-Mail : [email protected] Calcs by Checked by Date

Reactions for Load Case D

Reactions: Load Case :D


.9379 1

Y .3823

3 -.9379
X

.3574

Reactions for Load Case L

Reactions: Load Case :L


6.943 1

Y 2.885

3 -6.943
X

2.515
Job Number Sheet
Job Title
Software Consultants (Pty) Ltd Client
Internet: http://www.prokon.com
E-Mail : [email protected] Calcs by Checked by Date

Axial Forces for Load Combination C1

Y -9.51

10.49 0

3 X

You might also like