Scribd
Upload
8 views9 pages

HM594X302

The document presents the steel code checking results for a project titled 'Eastgrove China', utilizing the midas Gen software based on AISC (15th)-LRFD16 standards. It includes detailed load combinations, member specifications, material properties, and calculations for moment magnification factors, axial strength, and flexural strength. The analysis confirms that the member meets the necessary design criteria and specifications for structural integrity.

Uploaded by

Royce John Bañas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
8 views9 pages

HM594X302

The document presents the steel code checking results for a project titled 'Eastgrove China', utilizing the midas Gen software based on AISC (15th)-LRFD16 standards. It includes detailed load combinations, member specifications, material properties, and calculations for moment magnification factors, axial strength, and flexural strength. The analysis confirms that the member meets the necessary design criteria and specifications for structural integrity.

Uploaded by

Royce John Bañas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

midas Gen Steel Code Checking Result

PROJECT TITLE :
Company Integritus Consultancy Client
Author asus File Name Eastgrove China.acs

------------------------------------------------------------------------------------------
midas Gen - Steel Code Checking[ AISC(15th)-LRFD16 ] Gen 2021
==========================================================================================

+============================================================+
| MIDAS(Modeling, Integrated Design & Analysis Software) |
| midas Gen - Design & checking system for windows |
+============================================================+
| Steel Member Applicable Code Checking |
| Based On Eurocode3:05, Eurocode3, AISC(15th)-LRFD16, |
| AISC(15th)-ASD16, AISC(14th)-LRFD10, |
| AISC(14th)-ASD10, AISC(13th)-LRFD05, |
| AISC(13th)-ASD05, AISC-LRFD2K, AISC-LRFD93, |
| AISC-ASD89, CSA-S16-01, BS5950-90 |
| |
| |
| |
| |
| |
| |
| (c)SINCE 1989 |
+============================================================+
| MIDAS Information Technology Co.,Ltd. (MIDAS IT) |
| MIDAS IT Design Development Team |
+============================================================+
| HomePage : www.MidasUser.com |
+============================================================+
| Gen 2021 |
+============================================================+

*. DEFINITION OF LOAD COMBINATIONS WITH SCALING UP FACTORS.


--------------------------------------------------------------------------------------
LCB C Loadcase Name(Factor) + Loadcase Name(Factor) + Loadcase Name(Factor)
--------------------------------------------------------------------------------------
1 1 DL( 1.400)
2 1 DL( 1.200) + LL( 1.600)
3 1 DL( 1.200) + WL-X( 1.000) + LL( 1.000)
4 1 DL( 1.200) + WL-Y( 1.000) + LL( 1.000)
5 1 DL( 1.200) + WL-X(-1.000) + LL( 1.000)
6 1 DL( 1.200) + WL-Y(-1.000) + LL( 1.000)
7 1 DL( 1.200) + EL-X( 1.000) + LL( 1.000)
8 1 DL( 1.200) + EL-Y( 1.000) + LL( 1.000)
9 1 DL( 1.200) + EL-X(-1.000) + LL( 1.000)
10 1 DL( 1.200) + EL-Y(-1.000) + LL( 1.000)
11 1 DL( 1.200) + RS-M(RS)( 1.000) + LL( 1.000)
12 1 DL( 1.200) + RS-O(RS)( 1.000) + LL( 1.000)
13 1 DL( 1.200) + RS-M(RS)(-1.000) + LL( 1.000)
14 1 DL( 1.200) + RS-O(RS)(-1.000) + LL( 1.000)
15 1 DL( 0.900) + WL-X( 1.000)
16 1 DL( 0.900) + WL-Y( 1.000)
17 1 DL( 0.900) + WL-X(-1.000)
18 1 DL( 0.900) + WL-Y(-1.000)
19 1 DL( 0.900) + EL-X( 1.000)
20 1 DL( 0.900) + EL-Y( 1.000)
21 1 DL( 0.900) + EL-X(-1.000)
22 1 DL( 0.900) + EL-Y(-1.000)
23 1 DL( 0.900) + RS-M(RS)( 1.000)
24 1 DL( 0.900) + RS-O(RS)( 1.000)

Modeling, Integrated Design & Analysis Software Print Date/Time : 05/21/2025 20:18
http://www.MidasUser.com
Gen 2021 -1/9-
midas Gen Steel Code Checking Result

PROJECT TITLE :
Company Integritus Consultancy Client
Author asus File Name Eastgrove China.acs

------------------------------------------------------------------------------------------
midas Gen - Steel Code Checking[ AISC(15th)-LRFD16 ] Gen 2021
==========================================================================================

25 1 DL( 0.900) + RS-M(RS)(-1.000)


26 1 DL( 0.900) + RS-O(RS)(-1.000)
--------------------------------------------------------------------------------------

Modeling, Integrated Design & Analysis Software Print Date/Time : 05/21/2025 20:18
http://www.MidasUser.com
Gen 2021 -2/9-
midas Gen Steel Code Checking Result

PROJECT TITLE :
Company Integritus Consultancy Client
Author asus File Name Eastgrove China.acs

------------------------------------------------------------------------------------------
midas Gen - Steel Code Checking[ AISC(15th)-LRFD16 ] Gen 2021
==========================================================================================

*. PROJECT :
*. MEMBER NO = 353, ELEMENT TYPE = Beam
*. LOADCOMB NO = 8, MATERIAL NO = 1, SECTION NO = 38
*. UNIT SYSTEM : kN, m

*. SECTION PROPERTIES : Designation = HM 594x302x14/23


Shape = I - Section. (Rolled)
Depth = 0.594, Top F Width = 0.302, Bot.F Width = 0.302
Web Thick = 0.014, Top F Thick = 0.023, Bot.F Thick = 0.023

Area = 2.17090e-02, Asy = 9.26133e-03, Asz = 8.31600e-03


Ybar = 1.51000e-01, Zbar = 2.97000e-01, Qyb = 1.79187e-01, Qzb = 1.14005e-02
Syy = 4.45000e-03, Szz = 7.00100e-04, Zyy = 5.01723e-03, Zzz = 1.07570e-03
Iyy = 1.32179e-03, Izz = 1.05720e-04, Iyz = 0.00000e+00
ry = 2.46800e-01, rz = 6.98000e-02
J = 2.97190e-06, Cwp = 8.61726e-06

*. DESIGN PARAMETERS FOR STRENGTH EVALUATION :


Ly = 4.20000e+00, Lz = 4.20000e+00, Lu = 4.20000e+00
Ky = 1.00000e+00, Kz = 1.00000e+00

*. MATERIAL PROPERTIES :
Fy = 2.48211e+05, Es = 1.99948e+08, MATERIAL NAME = A36

======================================================================================
[[[*]]] COMPUTE MOMENT MAGNIFICATION FACTORS AND MAGNIFIED MOMENTS.
======================================================================================

( ). Factored force/moments caused by unit load case.


*.Load combination ID = 8
-------------------------------------------------------------------------------
Load Case Pa Myi Myj Mzi Mzj
-------------------------------------------------------------------------------
DL -300.12 146.42 -144.82 -9.45 9.39
LL -123.60 70.25 -69.81 -4.48 4.51
DL+LL -423.72 216.67 -214.63 -13.93 13.90
OTHER CASES -4.59 -0.49 6.36 -108.04 113.96
-------------------------------------------------------------------------------
TOTAL -428.31 216.18 -208.27 -121.97 127.86
-------------------------------------------------------------------------------
*.Member end moments caused by gravity load(DL+LL).
My1G = 214.63, My2G = 216.67
Mz1G = 13.90, Mz2G = 13.93

( ). Compute coefficient assuming no lateral translation of the frame (Cmy, Cmz)


[ AISC(15th) Specification C2.1.1b. (C2-4) ]
-. Cmy = 0.850 (User defined or default value)
-. Cmz = 0.850 (User defined or default value)

Modeling, Integrated Design & Analysis Software Print Date/Time : 05/21/2025 20:18
http://www.MidasUser.com
Gen 2021 -3/9-
midas Gen Steel Code Checking Result

PROJECT TITLE :
Company Integritus Consultancy Client
Author asus File Name Eastgrove China.acs

------------------------------------------------------------------------------------------
midas Gen - Steel Code Checking[ AISC(15th)-LRFD16 ] Gen 2021
==========================================================================================

( ). Compute moment magnification factors(B1y,B1z).


-. Pu = Pu(DL+LL) + Pu(WL(EL)) = 428.31 kN.
-. About major(Local-y) axis.
SLENy = Ky*Ly/ry = 17.02
Lambda = (SLENy/pi)*SQRT(Fy/Es) = 0.1909
Pey = (Area*Fy)/Lambda^2 = 147927.33 kN.
B1y = Cmy / (1-Pu/Pey) = 0.85
B1y < 1.0 ---> B1y = 1.00
-. About minor(Local-z) axis.
SLENz = Kz*Lz/rz = 60.17
Lambda = (SLENz/pi)*SQRT(Fy/Es) = 0.6748
Pez = (Area*Fy)/Lambda^2 = 11832.29 kN.
B1z = Cmz / (1-Pu/Pez) = 0.88
B1z < 1.0 ---> B1z = 1.00

( ). Magnification factors for sidesway moments(B2y,B2z).


-. B2y = 1.00 (Default value)
-. B2z = 1.00 (Default value)

( ). Given factored axial forces and moments at <J>.


----------------------------------------------------------------
Load Case Pa My Mz
----------------------------------------------------------------
DL -300.12 -144.82 9.39
LL -123.60 -69.81 4.51
DL+LL -423.72 -214.63 13.90
OTHER CASES -4.59 6.36 113.96
----------------------------------------------------------------
TOTAL -428.31 -208.27 127.86
----------------------------------------------------------------

( ). Compute magnified moments.


-. Muy = B1y*My(DL+LL) + B2y*My(OTHERS) = -208.27 kN-m.
-. Muz = B1z*Mz(DL+LL) + B2z*Mz(OTHERS) = 127.86 kN-m.

======================================================================================
[[[*]]] CHECK AXIAL STRENGTH.
======================================================================================

( ). Check slenderness ratio of axial compression member (KL/r).


[ AISC(15th) Specification E2. ]
-. KL/r = 60.2 < 200.0 ---> O.K.

( ). Check width-thickness ratio of flange (BTR).


[ AISC(15th) Specification B4. <Table B4.1a> ]
-. Lambda_r = 0.56*SQRT[Es/Fy] = 15.89
-. BTR = bf/2tf = 6.57 < Lambda_r ---> NON-SLENDER SECTION !

Modeling, Integrated Design & Analysis Software Print Date/Time : 05/21/2025 20:18
http://www.MidasUser.com
Gen 2021 -4/9-
midas Gen Steel Code Checking Result

PROJECT TITLE :
Company Integritus Consultancy Client
Author asus File Name Eastgrove China.acs

------------------------------------------------------------------------------------------
midas Gen - Steel Code Checking[ AISC(15th)-LRFD16 ] Gen 2021
==========================================================================================

( ). Check depth-thickness ratio of web (DTR).


[ AISC(15th) Specification B4. <Table B4.1a> ]
-. Lambda_r = 1.49*SQRT[Es/Fy] = 42.29
-. Dweb = H-tf1-tf2 = 0.52 m.
-. DTR = Dweb/tw = 37.29 < Lambda_r ---> NON-SLENDER SECTION !

( ). Calculate Flexural Buckling Stress (Fcr1).


[ AISC(15th) Specification E3 ]
pi^2 * E
-. Fe = ----------- = 545040.9411 KPa.
(Lc/r)^2
-. Lc/r = 60.172
-. 4.71 * SQRT[Es/Fy] = 133.681
-. Fy/Fe = 0.4554
-. When Lc/r < 4.71 * SQRT[Es/Fy]
-. Fcr1 = (0.658)^(Fy/Fe) * Fy = 205135.9573 KPa.

( ). Calculate axial compressive strength (phiPn).


[ AISC(15th) Specification E1. ]
-. Fcr = 205135.9573 KPa.
-. Resistance factor for compression : phi = 0.90
-. phiPn = phi*Area*Fcr = 4007.97 kN.

( ). Check ratio of axial strength (Pu/phiPn).


Pu 428.31
-. ------- = --------------- = 0.107 < 1.000 ---> O.K.
phiPn 4007.97

======================================================================================
[[[*]]] CHECK FLEXURAL STRENGTH ABOUT MAJOR AXIS.
======================================================================================

( ). Elastic section modulus refered to tension and compression flanges.


-. Syc = 0.0045 m^3.
-. Syt = 0.0045 m^3.

( ). Calculate limiting width-thickness ratio of flange for flexure.


[ AISC(15th) Specification B4. <Table B4.1b> ]
-. Lambda_p = 0.38*SQRT[Es/Fy] = 10.79
-. Lambda_r = 1.00*SQRT[Es/Fy] = 28.38

( ). Calculate limiting width-thickness ratio of web for flexure.


[ AISC(15th) Specification B4. <Table B4.1b> ]
-. Lambda_p = 3.76*SQRT[Es/Fy] = 106.72
-. Lambda_r = 5.70*SQRT[Es/Fy] = 161.78

( ). Check width-thickness ratio of flange (BTR).


[ AISC(15th) Specification B4. <Table B4.1b> ]
-. BTR = 6.57 < Lambda_p = 10.79 ---> COMPACT.

Modeling, Integrated Design & Analysis Software Print Date/Time : 05/21/2025 20:18
http://www.MidasUser.com
Gen 2021 -5/9-
midas Gen Steel Code Checking Result

PROJECT TITLE :
Company Integritus Consultancy Client
Author asus File Name Eastgrove China.acs

------------------------------------------------------------------------------------------
midas Gen - Steel Code Checking[ AISC(15th)-LRFD16 ] Gen 2021
==========================================================================================

( ). Check width-thickness ratio of web (DTR).


[ AISC(15th) Specification B4. <Table B4.1b> ]
-. DTR = 37.29 < Lambda_p = 106.72 ---> COMPACT.

( ). Calculate lateral-torsional buckling modification factor (Cb).


[ AISC(15th) Specification F1.(2) (F1-1) ]
-. Cb = 1.000 (User defined or default value)

--------------------------------------------------------------------------
[*] Check Yielding (Y).
--------------------------------------------------------------------------

( ). Calculate nominal flexural strength for Yielding (Y).


[ AISC(15th) Specification F2.1 (F2-1) ]
-. Mn.Y = Mp = Fy*Zyy = 1245.33 kN-m.

--------------------------------------------------------------------------
[*] Check Lateral-Torsional Buckling (LTB).
--------------------------------------------------------------------------

( ). Compute limiting laterally unbraced length for the limit state of yielding (Lp).
[ AISC(15th) Specification F2.2 (F2-5) ]
-. Lp = 1.76*rz*SQRT[Es/Fy] = 3.49 m.

( ). Compute laterally unbraced length for the limit state of inelastic lateral-
torsional buckling (Lr).
[ AISC(15th) Specification F2.2 (F2-6) ]
[ SQRT[Rzz*Cw] ]
-. rts = SQRT[ ------------ ] = 0.08 m.
[ Syy ]
-. c = 1.00 (for a doubly symmetry H-Shape)
-. h0 = H - 0.5*(tf1+tf2) = 0.57 m. (distance between the flange centroid)
Es
-. X1 = ------ = 39.36
0.7Fy
J*c
-. X2 = ------ = 4.73
Syy*h0
-. Lr = 1.95*rts*X1 * SQRT[ X2 +SQRT[ X2^2 + 6.76*(1/X1)^2 ] ] = 11.26 m.

( ). Calculate nominal flexural strength for Lateral-torsional buckling (LTB).


[ AISC(15th) Specification F2.2 (F2-2) ]
-. Lp < Lb < Lr.
[ Lb-Lp ]
-. Mn = Cb *[ Mp - (Mp-0.7*Fy*Syy) * ------- ] = 1202.02 kN-m.
[ Lr-Lp ]
-. Mn.LTB = MIN [ Mn, Mp ] = 1202.02 kN-m.

Modeling, Integrated Design & Analysis Software Print Date/Time : 05/21/2025 20:18
http://www.MidasUser.com
Gen 2021 -6/9-
midas Gen Steel Code Checking Result

PROJECT TITLE :
Company Integritus Consultancy Client
Author asus File Name Eastgrove China.acs

------------------------------------------------------------------------------------------
midas Gen - Steel Code Checking[ AISC(15th)-LRFD16 ] Gen 2021
==========================================================================================

( ). Compute flexural strength about major axis (phiMny).


-. Mny = MIN[ Mn.Y, Mn.LTB ] = 1202.02 kN-m.
-. Resistance factor for flexure : phi = 0.90
-. phiMny = phi*Mny = 1081.82 kN-m.

( ). Check ratio of flexural strength (Muy/phiMny).


Muy 208.27
-. -------- = --------------- = 0.193 < 1.000 ---> O.K.
phiMny 1081.82

======================================================================================
[[[*]]] CHECK FLEXURAL STRENGTH ABOUT MINOR AXIS.
======================================================================================

( ). Elastic section modulus refered to tension and compression flanges.


-. Syc = 0.0045 m^3.
-. Syt = 0.0045 m^3.

( ). Calculate limiting width-thickness ratio of flange for flexure.


[ AISC(15th) Specification B4. <Table B4.1b> ]
-. Lambda_p = 0.38*SQRT[Es/Fy] = 10.79
-. Lambda_r = 1.00*SQRT[Es/Fy] = 28.38

( ). Check width-thickness ratio of flange (BTR).


[ AISC(15th) Specification B4. <Table B4.1b> ]
-. BTR = 6.57 < Lambda_p = 10.79 ---> COMPACT.

--------------------------------------------------------------------------
[*] Check Yielding (Y).
--------------------------------------------------------------------------

( ). Calculate nominal flexural strength for Yielding (Y).


[ AISC(15th) Specification F6.1 (F6-1) ]
-. Mn.Y = Mp = MIN[ Fy*Zzz, 1.6*Fy*Szz ] = 267.00 kN-m.

--------------------------------------------------------------------------
[*] Check Flange Local Buckling (FLB).
--------------------------------------------------------------------------

( ). Calculate nominal flexural strength for Flange local buckling (FLB).


-. COMPACT flange ---> the limit state of flange local buckling is not applied.

( ). Compute flexural strength about minor axis (phiMnz).


-. Mnz = Mn.Y = 267.00 kN-m.
-. Resistance factor for flexure : phi = 0.90
-. phiMnz = phi*Mnz = 240.30 kN-m.

Modeling, Integrated Design & Analysis Software Print Date/Time : 05/21/2025 20:18
http://www.MidasUser.com
Gen 2021 -7/9-
midas Gen Steel Code Checking Result

PROJECT TITLE :
Company Integritus Consultancy Client
Author asus File Name Eastgrove China.acs

------------------------------------------------------------------------------------------
midas Gen - Steel Code Checking[ AISC(15th)-LRFD16 ] Gen 2021
==========================================================================================

( ). Check ratio of flexural strength (Muz/phiMnz).


Muz 127.86
-. -------- = --------------- = 0.532 < 1.000 ---> O.K.
phiMnz 240.30

======================================================================================
[[[*]]] CHECK INTERACTION OF COMBINED STRENGTH.
======================================================================================

( ). Check interaction ratio of combined strength.


[ AISC(15th) Specification H1.1(b) ]
-. Pr/Pc < 0.20 ---> Formula(H1-1b)
Pr [ Mry Mrz ]
-. ComRat = ------ + [ ----- + ----- ]
2*Pc [ Mcy Mcz ]
= 0.053 + [ 0.193 + 0.532 ]
= 0.778 < 1.000 ---> O.K.

======================================================================================
[[[*]]] CHECK SHEAR STRENGTH.
======================================================================================

( ). Calculate the web shear buckling coefficient (Cv2).


[ AISC(15th) Specification G2.2 (G2-9) ]
-. for webs of all other doubly/singly symmetric shapes and channels.
-. kv (web plate buckling coefficient) = 1.20
-. h/tw = 6.565< 1.10*SQRT[kv*Es/Fy] = 34.200
-. Cv2 = 1.00

( ). Calculate shear strength in local-y direction (phiVny).


-. Aw = 0.01 m^2.
-. Vn = 0.6*Fy*Aw*Cv2 = 2068.8912 kN.
-. Resistance factor for shear : phi = 0.90
-. phiVny = phi*Vn = 1862.00 kN.

( ). Check ratio of shear strength (Vu/phiVn).


( LCB = 8, POS = J )
-. Applied shear force : Vuy = 59.48 kN.
Vuy 59.48
-. -------- = --------------- = 0.032 < 1.000 ---> O.K.
phiVny 1862.00

( ). Calculate shear strength coefficient (Cv1).


[ AISC(15th) Specification G2.1 (G2-2) ]
-. for Rolled H-Shape members.
-. h/tw = 37.286 < 2.24*SQRT[Es/Fy] = 63.576
-. Cv1 = 1.00

Modeling, Integrated Design & Analysis Software Print Date/Time : 05/21/2025 20:18
http://www.MidasUser.com
Gen 2021 -8/9-
midas Gen Steel Code Checking Result

PROJECT TITLE :
Company Integritus Consultancy Client
Author asus File Name Eastgrove China.acs

------------------------------------------------------------------------------------------
midas Gen - Steel Code Checking[ AISC(15th)-LRFD16 ] Gen 2021
==========================================================================================

( ). Calculate shear strength in local-z direction (phiVnz).


-. Aw = 8.32e-03 m^2.
-. Vn = 0.6*Fy*Aw*Cv1 = 1238.4753 kN.
-. for webs of rolled H-shape members with h/tw < 2.24*SQRT[Es/Fy].
-. Resistance factor for shear : phi = 1.00
-. phiVnz = phi*Vn = 1238.48 kN.

( ). Check ratio of shear strength (Vu/phiVn).


( LCB = 7, POS = J )
-. Applied shear force : Vuz = 148.73 kN.
Vuz 148.73
-. -------- = --------------- = 0.120 < 1.000 ---> O.K.
phiVnz 1238.48

Modeling, Integrated Design & Analysis Software Print Date/Time : 05/21/2025 20:18
http://www.MidasUser.com
Gen 2021 -9/9-

You might also like