Scribd
Upload
6 views26 pages

Egd 2024

The document outlines a series of engineering graphics and design questions and tasks, including drawing geometric shapes, creating scale representations, and projecting various solids. It covers topics such as the development of lateral surfaces, projections of points and lines, and the use of drawing instruments. Additionally, it discusses the array function in AutoCAD and lists different design software.

Uploaded by

x2x7pj8wwp
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
6 views26 pages

Egd 2024

The document outlines a series of engineering graphics and design questions and tasks, including drawing geometric shapes, creating scale representations, and projecting various solids. It covers topics such as the development of lateral surfaces, projections of points and lines, and the use of drawing instruments. Additionally, it discusses the array function in AutoCAD and lists different design software.

Uploaded by

x2x7pj8wwp
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 26

Complete Paper Solution

Engineering Graphics and Design

(GTU)
Q. 1 (a) Draw regular square, pentagon and hexagon by UNIVERSAL METHOD of
35 mm side. (3 Marks)
Q. 1 (b) The distance between Ahmedabad and Surat is 200 km. In a railway map
it is represented by a line 5 cm long. Find it’s R.F. Draw a diagonal scale to show
single km. And maximum 600 km. Indicate on it following distances. (1) 222 km (2) 569
km. (4 Marks)
Q. 1 (c) A pole is of a shape of half hexagon and semicircle. A string is to be wound having
length equal to the pole perimeter Draw path of free end P of string when wound
completely. (Take hexagon 30 mm sides and semicircle of 60 mm diameter.) (7 Marks)
Circle.
Q. 2 (a) (1) The top view of a right cylinder resting on HP on its base is ______
(3 Marks) TV

Rectangle
(2) The development of cylinder is a __________

(3) The isometric projection of a sphere is a Circle.


Q. 2 (b) Draw Development of lateral surfaces of following solids.
(1) Cylinder (2) Cone (3) Pentagonal Prism (4) Cube (4 Marks)
Q. 2 (c) Rod AB, 100 mm long, revolves in clockwise direction for one
revolution. Meanwhile point P, initially on A starts moving towards B and reaches B.
Draw locus of point P. (7 Marks)
Q. 2 (c) OR Draw loci of point ‘P’ given in figure (7 Marks)

Video Link: https://youtu.be/L1YgqM863rw


Q. 3 (a) Draw following projection of points:
(1) Point ‘A’ is 20 mm above HP and 25 mm In front of VP.
(2) Point ‘B’ is 35 mm behind VP and 30 mm above HP.
(3) Point ‘C’ is in the HP and 15 mm In front of VP. (3 Marks)
Q. 3 (b) Draw projections of line AB=80 mm inclined to 60° HP & 30° VP and parallel
to PP. (4 Marks)
Q. 3 (c) Line AB 75mm long makes 45° inclinations with VP while it’s FV makes 55°.
End A is 10 mm above HP and 15 mm in front of VP. If line is in 1st quadrant
draw its projections and find it’s inclination with HP. (7 Marks)
Q. 3 (a) OR Draw Parallel, Chain and Combined Dimensioning for following figure.
(3 Marks)
Q. 3 (b) OR Write at least one use of following drawing instruments: (4 Marks)
(1) Mini drafter :

It is used to draw faster. It serves the purpose of T-square, set square, protractor and
scale.
(2) Protector :

it is used for the measurement of angles.


(3) Set squares :

Set squares are used with T – square to draw lines at various angles.
(4) Compass :

It is used to draw circles and arcs.


(5) Divider :

It is like a compass except it has metal points at both legs. It is used to transfer distances or
dimensions and sometimes for dividing space into equal divisions.
(6) Roll-N-Draw:

It is used to draw parallel line quickly and easily.


(7) T-square :

The T – square slides up and down along the straight working edge of the board to draw
parallel horizontal straight lines.
(8) French curve :

It is used to draw curves other than arc of circles accurately and uniformly. i.e. it is used to
draw irregular arcs.
Q. 3 (c) OR A room is of size 6.5m L ,5m D,3.5m high. An electric bulb hangs 1m below the
center of ceiling. A switch is placed in one of the corners of the room, 1.5m above the
flooring. Draw the projections and determine real distance between the bulb and switch.
(7 Marks)
Q. 4 (a) Draw symbol of first angle and third angle projection method. (3 Marks)

Frustum of Cone

Ø8 Ø 16

F.V.

First Angle Projection Method Third Angle Projection Method

F.V. L.H.S.V. L.H.S.V. F.V.

20 20
Q. 4 (b) Draw Isometric view of Circle of 50mm diameter, Pentagon of 30 mm side,
a cube of 50mm side and a hexagon of 25 mm side. (4 Marks)
Q. 4 (c) A regular pentagon of 30 mm sides is resting on HP on one of its sides
with its surface 45° inclined to HP. Draw its projections when the side in HP
makes 60° angles with VP. (7 Marks)

Video Link: https://youtu.be/xnp5M9QfJLE


Q. 4 (a) OR Identify following solids: (3 Marks)

Frustum of Cone Frustum of Square Pyramid Tetrahedron


(Triangular Pyramid)
Q. 4 (b) OR A rectangle ABCD 60 mm x 40 mm, is parallel to HP with one of
its sides inclined at 30° to VP and the end of the side near to VP is 15 mm in front
of the VP and 30 mm above HP. Draw its projections. (4 Marks)
Q. 4 (c) OR A square pyramid, side of base 30 mm and height 50 mm, is resting
on HP with a side of its base. Draw the projections if the axis is inclined to 45° to
HP and parallel to VP (7 Marks)
Q. 5 (a) What is meant by ARRAY in AUTOCAD? What are types of ARRAYs? (4 Marks)

Array command is used to create multiple copies of selected object in a rectangular pattern
or polar / circular pattern. So, there are two types of array,

1. Rectangular array 2. Polar / Circular array


• It is used for seating arrangements in • It is used for gear teeth, sprocket
auditorium, tiles fitting in hall etc. teeth etc.
Q. 5 (b) Draw orthographic projections of given figure (FV, TV, RHSV) as per first
angle projection method. (10 Marks)
Q. 5 (a) OR Write down different software used in design. (4 Marks)

Different software used in design is as per the following.


1. AutoCAD
2. Solidworks
3. Creo
4. Catia
5. Fusion 360
Q. 5 (b) OR Draw isometric scale for length of 100mm. and draw isometric view for
given figure. (10 Marks)

You might also like