Scribd
Upload
2 views1 page

Microcontroller Cp Merged-6

The document provides a circuit diagram and details the main components of a keypad and microcontroller system. It describes a 4x4 matrix keypad connected to an AT89C51 microcontroller, outlining the connections for rows and columns to the microcontroller ports. Additionally, it specifies how the microcontroller interfaces with the keypad and LCD data lines.

Uploaded by

shashankcm0313
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2 views1 page

Microcontroller Cp Merged-6

The document provides a circuit diagram and details the main components of a keypad and microcontroller system. It describes a 4x4 matrix keypad connected to an AT89C51 microcontroller, outlining the connections for rows and columns to the microcontroller ports. Additionally, it specifies how the microcontroller interfaces with the keypad and LCD data lines.

Uploaded by

shashankcm0313
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

2.

Circuit Diagram:

Circuit Diagram

3. Main Components and Their Connections:

1. Keypad (4x4 Matrix)

• This is a 16-key keypad used to enter digits and operations.

• It has 4 rows (R1-R4) and 4 columns (C1-C4):

o Rows (A–D) are connected to P1.4 to P1.7 of the microcontroller.

o Columns (1–4) are connected to P1.0 to P1.3.

• The microcontroller scans the rows and columns to detect which key is pressed.

2. Microcontroller – AT89C51

• 40-pin microcontroller from the 8051 family.

• Port 1 (P1.0 to P1.7): Used for interfacing with the keypad.

• Port 2 (P2.0 to P2.7): Used for interfacing with the LCD data lines (D0–D7).

• Port 3 (specifically P3.5, P3.6, and P3.7): Used to control LCD pins:

Dept of ECE, BIET, Davanagere 4|Page

You might also like