SLX-D

DIGITAL WIRELESS
SYSTEMS

Your performance should never be in question. Whether presenting, APPLICATIONS

educating, praising or entertaining, your relationship with your audience Event, Presentation and Speech
House of Worship
is singular. With SLX-D Digital Wireless you can stand confidently on a Performance and Clubs

strong foundation and build the wireless installation to match ongoing Videography and Location Sound
Electronic News Gathering (ENG) and Broadcast
demands, from day-long conference to nighttime performances.
PRODUCT HIGHLIGHTS
Extended 20 Hz to 20 kHz frequency range
ALWAYS COME THROUGH CLEAR (microphone dependent)

In front of an audience, clarity is simply essential. SLX-D provides 118 dB dynamic range

crystal-clear digital audio quality with >118 dB dynamic range. Digital predictive switching diversity
44 MHz tuning bandwidth (region dependent)
32 available channels per frequency band (region dependent)

DROPOUTS ARE OUT Up to 10 compatible systems per 6MHz TV band; 12 systems per
8 MHz band
From the leader in digital wireless technology, SLX-D maintains stable Easy pairing of transmitters and receivers over IR scan
signals with high efficiency for rock-solid, reliable performance. and sync
Portable Receiver & Plug-On Transmitter Options
Compatible with Shure Wireless Workbench® control software
KEEP THE SHOW GOING (SLXD4/SLXD4D Only)

Ready to perform for all-day conferences and nighttime performances— Remote control via ShurePlus™ Channels mobile app (SLXD4/
SLXD4D Only)
up to 8 hours of use from either 2 AA batteries (included) or optional Up to 8 hours from 2 AA batteries or optional Shure SB903
Shure SB903 Li-ion rechargeable batteries and charging accessories. rechargeable battery
SLX-D DIGITAL WIRELESS SYSTEMS
SYSTEM SPECIFICATIONS ( subject to change ) FREQUENCY RANGE
Transmitter
RF Band Range (MHz) Output (mW)
470–937.5 MHz
RF Carrier Frequency Range G58 470 to 514 1/10/30*
Varies by Region. See Frequency Range and Output Power Table.

100 m (328 ft) G59 470 to 514 1/10/30*

Working Range Note: Actual range depends on RF signal absorption, reflection and interference.
G60 470 to 510 1/10/30*
JB Band: 125 kHz
RF Tuning Step Size G61 479 to 523 1/10
All Other Bands: 25 kHz
Varies by region. G62 510 to 580 1/10/30*
>70 dB H55 514 to 558 1/10/30*
Image Rejection typical
H56 518 to 562 1/10/30*
RF Sensitivity −97 dBm at 10-5 BER
H57 520 to 564 1/10
AUDIO 558 to 602; 1/10/30* (558–602)
J52
Latency 3.2 ms 614 to 616 1/10 (614–616)

150 Hz, –12 dB/octave J53 562 to 606 1/10/30*

High-Pass/Low Cut Filter Note: factory default is for the HPF to be off J54 562 to 606 1/10/30*
Audio Frequency Response 20 Hz–20 kHz (+1, −2 dB) JB 806 to 810 1/10
Audio Dynamic Range 118 dB K59 606 to 650 1/10/30*
A-weighted, 20 Hz–20 kHz, typical @1% THD
L55 646 to 690 1/10
Total Harmonic Distortion <0.02%
L56 650 to 694 1/10/30*
XLR: Positive pressure on microphone diaphragm produces positive voltage on pin
2 with respect to pin 3 of XLR output. L57 650 to 694 1/10
System Audio Polarity
TRS: Postive pressure on microphone diaphragm produces positive voltage on the L58 630 to 674 1/10/30*
tip of the 6.35 mm (1/4-inch) with respect to the ring of the 6.35 mm output.
L59 654 to 698 1/10/30*
Mic Offset Range 0 to 21 dB (in 3 dB steps)
694 to 703;
M55 1/10/30*
748 to 758
TEMPERATURE RANGE Note: Battery characteristics may limit this range.
S50 823 to 832 1/10
Operating Temperature Range 0 °F to 122 °F (−18 °C to 50 °C)
X51 925 to 937.5 1/10
Storage Temperature Range −20 °F to 165 °F (−29 °C to 74 °C)
NOTE: This Radio equipment is intended for use in musical professional entertainment and similar applications. This Radio apparatus may be capable of
*30 mW only found on SLXD3 in select bands
operating on some frequencies not authorized in your region. Please contact your national authority to obtain information on authorized frequencies and Note: Not all frequencies available in all regions.
RF power levels for wireless microphone products. Contact your authorized Shure dealer for availability.

AVAILABLE CONFIGURATIONS
SLXD14 Wireless System with SLXD1 Bodypack Transmitter and WA305 Instrument Cable SLXD124/85 Handheld and Lavalier Combo Wireless System
SLXD14/DL4 Wireless System with SLXD1 Bodypack Transmitter and DL4B Lavalier Microphone SLXD35 Portable Wireless System with SLXD3 Plug-On Transmitter
SLXD14/83 Wireless System with SLXD1 Bodypack Transmitter and WL183 Lavalier Microphone SLXD24/SM58 Wireless System with SM58® Handheld Transmitter
SLXD14/85 Wireless System with SLXD1 Bodypack Transmitter and WL185 Lavalier Microphone SLXD24/SM86 Wireless System with SM86 Handheld Transmitter
SLXD14/93 Wireless System with SLXD1 Bodypack Transmitter and WL93 Miniature Lavalier Microphone SLXD24/B58 Wireless System with Beta® 58A Handheld Transmitter
SLXD14/153B Wireless System with SLXD1 Bodypack Transmitter and MX153 (Black) Omni. Condenser Earset SLXD24/B87A Wireless System with Beta® 87A Handheld Transmitter
SLXD14/153T Wireless System with SLXD1 Bodypack Transmitter and MX153 (Tan) Omni. Condenser Earset SLXD24/B87C Wireless System with Beta® 87C Handheld Transmitter
SLXD14/98H Wireless System with SLXD1 Bodypack Transmitter and Beta® 98H/C Miniature Instrument Microphone SLXD24/K8B Wireless System with KSM8 Dualdyne™ Handheld Transmitter
SLXD14/SM35 Wireless System with SLXD1 Bodypack Transmitter and SM35 Headset Microphone SLXD24D/SM58 Dual Wireless System with 2 SLXD2/SM58 Handheld Transmitters
SLXD15 Portable Wireless System with SLXD1 Bodypack Transmitter (No Lavalier) SLXD24D/B58 Dual Wireless System with 2 SLXD2/B58 Handheld Transmitters
SLXD15/85 Portable Wireless System with SLXD1 Bodypack Transmitter and WL185 Lavalier Microphone SLXD14D Dual Wireless System with two SLXD1 Bodypack Transmitters
SLXD15/DL4 Portable Wireless System with SLXD1 Bodypack Transmitter and DL4B Lavalier Microphone SLXD25/SM58 Portable Wireless System with SM58 Handheld Transmitter
SLXD15/UL4 Portable Wireless System with SLXD1 Bodypack Transmitter and UL4B Lavalier Microphone SLX25/VP68 Portable Wireless System with VP68 Handheld Transmitter
Not all systems are available in all regions. Contact your Authorized Shure Dealer for availability in your region.

OPTIONAL ACCESSORIES (SEE SHURE.COM FOR MORE)

SB903 Shure Lithium Ion Rechargeable Battery UA844+SWB Antenna/Power Distribution System 470-960 MHz UA221 UHF Passive Antenna Splitter
SBC203 Dual Docking Charger UABIAST Inline Power Supply UA600 Front Mount Antenna Kit
SBC10-903 Single Battery Charger UA834 Inline Antenna Amplifier UA505 Remote Antenna Bracket with BNC Bulkhead Adapter
SBC80-903 Eight-Bay Battery Charger UA874 Active Directional Antennas HA-8089 Helical Antenna
SBC-DC-903 DC Battery Eliminator for SLXD5 PA805SWB Directional Wideband Antenna, 470-952 MHz WA301 Water-Resistant Silicone Protective Sleeve for SLXD5
UA8 Half-Wave Omnidirectional Receiver Antennas PA805X Directional Wideband Antenna, 650-1100 MHz WA311 Non-Conductive Cold Shoe Mount Adapter for SLXD5
UA845UWB Ultra Wideband Antenna/Power Distribution UA860 Passive Omnidrectional Antenna, 470-1100 MHz
System, 174-1804 MHz

shure.com
© 2024 Shure Incorporated
 SLXD4 DIGITAL WIRELESS RECEIVER

SPECIFICATIONS OVERVIEW
(SUBJECT TO CHANGE)
SLX-D Digital Wireless delivers transparent, 24-bit digital audio and rock solid RF performance with easy
Dimensions 1.65 × 7.76 × 5.98 in setup and rechargeability options in a suite of versatile wireless system configurations. Featuring industry-
(H × W × D) (42 × 197 × 152 mm)
leading digital wireless technology and design, the SLXD4 easily syncs wireless transmitters. A variety of
1.8 lb (816 g) interchangeable vocal microphone choices guarantees the right solution for a wide range of applications, from
Weight without antennas
day-long conference to nighttime performances.
Housing Galvanized Steel

Power Requirements 15 VDC @ 600 mA

Supplied by external power supply
(tip positive)
FEATURES
• Transparent 24-bit digital audio
• Extended 20 Hz to 20 kHz frequency range (microphone dependent)
RF INPUT
>75 dB • 118 dB dynamic range
Spurious Rejection Typical
• Digital predictive switching diversity
Connector Type BNC • 44 MHz tuning bandwidth (region dependent)
Impedance 50 Ω • 32 available channels per frequency band (region dependent)
• Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
AUDIO OUTPUT • Easy pairing of transmitters and receivers over scan and IR sync
Gain Adjustment Range –18 to +42 dB in 1 dB steps • Compatible with Shure Wireless Workbench® control software
1/4" (6.35 mm): Balanced • Remote monitoring and control via ShurePlus™ Channels app
(Tip=audio +, Ring=audio –,
Sleeve=ground) • Rugged metal construction
Configuration
XLR: Balanced
(1=ground, 2=audio +, 3=audio –)
1/4" (6.35 mm): 1.3 kΩ (670 Ω
Unbalanced)
Impedance
XLR (line): 400 Ω (200 Ω Unbalanced)
XLR (mic): 150 Ω
1/4" (6.35 mm): +15 dBV differentially
(+9 dBV single)
Full Scale Output
XLR (LINE setting): +15 dBV
XLR (MIC setting): –15 dBV

Mic/Line Switch 30 dB pad

Phantom 1/4" (6.35 mm): Yes

Power Protection XLR: Yes

NETWORKING
Network Interface Single Port Ethernet 10/100 Mbps

Network
DHCP or Manual IP address
Addressing Capability

Maximum Cable Length 100 m (328 ft)

exit

push —

IR sync

SLXD4
Front Panel

receiver 1 receiver 2 exit

antennaexitB antenna A push —
push —

IR sync
sync

inst / aux

SLXD4
Back Panel

shure.com
© 2024 Shure Incorporated
SLXD4D DUAL-CHANNEL
DIGITAL WIRELESS RECEIVER

SPECIFICATIONS OVERVIEW
(SUBJECT TO CHANGE)
SLX-D Digital Wireless delivers transparent, 24-bit digital audio and rock solid RF performance with easy
Dimensions 1.65 × 15.5 × 5.98 in setup and rechargeability options in a suite of versatile wireless system configurations. Featuring industry-
(H × W × D) (42 × 393 × 152 mm)
leading digital wireless technology and design, the SLXD4D easily syncs wireless transmitters. A variety of
3.2 lb (1451 g) interchangeable vocal microphone choices guarantees the right solution for a wide range of applications, from
Weight without antennas
day-long conference to nighttime performances.
Housing Galvanized Steel

Power Requirements 15 VDC @ 600 mA

Supplied by external power supply
(tip positive)
FEATURES
• Transparent 24-bit digital audio
RF INPUT • Extended 20 Hz to 20 kHz frequency range (microphone dependent)

Spurious Rejection >75 dB • 118 dB dynamic range

Typical
• Digital predictive switching diversity
Connector Type BNC
• 44 MHz tuning bandwidth (region dependent)
Impedance 50 Ω
• 32 available channels per frequency band (region dependent)
• Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
AUDIO OUTPUT • Easy pairing of transmitters and receivers over scan and IR sync
Gain Adjustment Range –18 to +42 dB in 1 dB steps
• Compatible with Shure Wireless Workbench® control software
1/4" (6.35 mm): Balanced • Remote monitoring and control via ShurePlus™ Channels app
(Tip=audio +, Ring=audio –,
Configuration Sleeve=ground) • Rugged metal construction
XLR: Balanced
(1=ground, 2=audio +, 3=audio –)
1/4" (6.35 mm): 1.3 kΩ (670 Ω
Unbalanced)
Impedance
XLR (line): 400 Ω (200 Ω Unbalanced)
XLR (mic): 150 Ω
1/4" (6.35 mm): +15 dB differentially
(+9 dBV single)
Full Scale Output
XLR (LINE setting): +15 dBV
XLR (MIC setting): –15 dBV

Mic/Line Switch 30 dB pad

Phantom 1/4" (6.35 mm): Yes

Power Protection XLR: Yes

NETWORKING
Network Interface Single Port Ethernet 10/100 Mbps
exit

Network push —
DHCP or Manual IP address
Addressing Capability IR sync

Maximum Cable Length 100 m (328 ft)

receiver 1 receiver 2 exit

exit
push —
push —

IR sync
sync

SLXD4D
Front Panel

mic / line - menu mic / line - menu

inst / aux inst / aux

SLXD4D
Back Panel

shure.com
© 2024 Shure Incorporated
SLXD5 SINGLE-CHANNEL
PORTABLE DIGITAL WIRELESS RECEIVER

SPECIFICATIONS OVERVIEW
(SUBJECT TO CHANGE)
The SLXD5 Single-Channel Portable Digital Wireless Receiver packs the rich features of an SLXD Digital
Dimensions 4.21 × 2.68 × 1.0 in Wireless Receiver into a slim, portable package. Featuring pristine 24-bit digital audio clarity, efficient long-
(H × W × D) (107 × 68 × 25.3 mm)
range UHF transmission and easy-to-use setup features, the SLXD5 is at home on top of your camera or in an
Weight 1.8 lb (182 g) audio bag. Scan and deploy frequencies to a compatible SLXD wireless transmitter with IR sync, or coordinate
and monitor large channel configurations with many sources using Multi-Mic Mode. A full suite of optional
Housing Aluminum
rechargeability accessories enables wireless excellence, wherever required, and the bright OLED screen
Power Requirements Battery: Rechargeable Li-Ion or displays battery life in hours and minutes when used with the optional SB903 Rechargeable Lithium-Ion
1.5 V AA batteries batteries. Includes SLXD5 Portable Receiver, a pair of AA alkaline batteries, a non-conductive cold shoe mount
Power Supply: SBC-DC-903 Battery adapter and a zippered carrying pouch.
Eliminator, or 5 VDC via USB-C

RF INPUT FEATURES
>75 dB
Spurious Rejection Typical
• Powerful, portable digital wireless receiver for on-camera cold shoe mounting and audio bag use

Impedance 50 Ω
• Transparent 24-bit digital audio

Phantom Power
• Extended 20 Hz to 20 kHz frequency range (microphone dependent)
Yes
Protection • 118 dB dynamic range
Antenna Type 1/4 Wave Whip • Dual 1/8” outputs including a headphone monitor out and switchable line/mic output
• Use Multi-Mic Mode to scan and sync over IR multiple clean frequencies, and monitor multiple sources from
AUDIO OUTPUT a single receiver with user-configurable front-panel controls
Audio Frequency 20 Hz – 20 kHz • Bright OLED display screen for key system function readouts and remaining battery life
Response (+1, -3 dB)
• Digital predictive switching diversity
Connector Type 1/8" (3.5 mm), ×2
• 44 MHz tuning bandwidth (region dependent)
Balanced (Mono): Tip=audio +, • 32 available channels per frequency band (region dependent)
Ring=audio –, Sleeve=ground
Configuration • Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
Dual Mono: Tip = left, Ring = Right,
Sleeve = Ground • Rugged metal construction
Balanced (Mono) Line: 450 Ω
Impedance Balanced (Mono) Mic: 240 Ω
(Camera) Dual Mono Line: 400 Ω
Dual Mono Mic: 200 Ω
Camera (Balanced Line): 15 dBV
Full Scale Output
Headphone: 13 mW @ 64 Ω Load

SLXD5
Portable Receiver

shure.com
© 2024 Shure Incorporated
SLXD1 DIGITAL WIRELESS
BODYPACK TRANSMITTER

SPECIFICATIONS OVERVIEW
(SUBJECT TO CHANGE)
SLX-D Digital Wireless delivers transparent, 24-bit digital audio and rock solid RF performance with easy setup
Rechargeable Li-Ion and rechargeability options in a suite of versatile wireless system configurations. Featuring industry-leading
Battery Type
or 1.5 V AA batteries
digital wireless technology and design, the SLXD1 easily syncs with a wireless receiver. TQG connectivity to
Dimensions 3.86 × 2.68 × 1.0 in a variety of microphone options guarantees the right solution for a wide range of applications, from day-long
(H × W × D) (98 × 68 × 25.5 mm)
conference to nighttime performances.
Weight 3.1 oz (89 g)

Housing PC/ABS
FEATURES
• Transparent 24-bit digital audio
AUDIO INPUT
• Extended 20 Hz to 20 kHz frequency range (microphone dependent)
Connector 4-Pin male mini connector (TA4M)
• 118 dB dynamic range
Configuration Unbalanced • Digital predictive switching diversity
Impedance 1 MΩ • 44 MHz tuning bandwidth (region dependent)
8.2 dBV • 32 available channels per frequency band (region dependent)
Maximum Input Level (2.57 Vrms, 7.27 Vpp)
• Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
Preamplifier Equivalent –118 dBV
Input Noise (EIN) • Easy pairing of transmitters and receivers over scan and IR sync
• Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery
RF OUTPUT • TQG connectivity offers a variety of microphone options
Antenna Type 1/4 Wave • Ergonomic, durable plastic construction
Occupied Bandwidth <200 kHz

Modulation Type Shure Propietary Digital

Power 1 mW/10 mW
Varies by region.
See Frequency Range and
Output Power Table.

MICROPHONE OPTIONS SEE SHURE.COM FOR MORE OPTIONS

DuraPlex™ Omnidirectional
DL4B
Waterproof Lavalier Microphone
Omnidirectional Condenser
WL183
Lavalier Microphone
Cardioid Condenser
WL185
Lavalier Microphone
Omnidirectional Miniature
WL93
Condenser Microphone
Microflex® Headworn Earset
MX153T
Microphone, Tan
Microflex® Headworn Earset
MX153B
Microphone, Black
Cardioid Condenser
SM35
Headworn Microphone
Beta® 98H/C Clip-On Condenser
SLXD
WB98H/C
Instrument Microphone

WA305 1/4" Locking Instrument Cable

SLXD1
Bodypack Transmitter

shure.com
© 2024 Shure Incorporated
SLXD2 DIGITAL WIRELESS
HANDHELD TRANSMITTER

SPECIFICATIONS OVERVIEW
(SUBJECT TO CHANGE)
SLX-D Digital Wireless delivers transparent, 24-bit digital audio and rock solid RF performance with easy
Rechargeable Li-Ion setup and rechargeability options in a suite of versatile wireless system configurations. Featuring industry-
Battery Type
or 1.5 V AA batteries
leading digital wireless technology and design, the SLXD2 easily syncs with a wireless receiver. A variety of
Dimensions 1.46 × 6.93 in interchangeable vocal microphone choices guarantees the right solution for a wide range of applications, from
(Dia. × L) (37.1 × 176 mm)
day-long conference to nighttime performances.
Weight 5.2 oz. (147 g)

Housing Aluminum
FEATURES
• Transparent 24-bit digital audio
AUDIO INPUT
• Extended 20 Hz to 20 kHz frequency range (microphone dependent)
Configuration Unbalanced
• 118 dB dynamic range
Maximum Input Level 8.2 dBV • Digital predictive switching diversity
(2.57 Vrms, 7.27 Vpp)
Note: Dependent on Microphone Type • 44 MHz tuning bandwidth (region dependent)

RF OUTPUT • 32 available channels per frequency band (region dependent)

• Up to 10 compatible systems per 6MHz TV band; 12 systems per 8
Antenna Type Integrated Single-Band Helical
MHz bandv
Occupied Bandwidth <200 kHz
• Easy pairing of transmitters and receivers over scan and IR sync
Modulation Type Shure Propietary Digital • Up to 8 hours from 2 AA batteries or optional Shure SB903
rechargeable battery
Power 1 mW/10 mW
Varies by region. • Interchangeable microphone capsules
See Frequency Range and
Output Power Table. • Rugged metal construction

MICROPHONE OPTIONS SEE SHURE.COM FOR MORE OPTIONS

Industry Standard Cardoid Dynamic
SM58®
Vocal Microphone
Supercardioid Condenser Vocal
Beta® 87A
Microphone
Cardioid Condenser Vocal
Beta® 87C
Microphone
Cardioid Condenser Vocal
SM86
Microphone

KSM8 Dual-Diaphragm Dynamic Vocal

Microphone

SLXD2
Handheld Transmitter

shure.com
© 2024 Shure Incorporated
SLXD3 DIGITAL WIRELESS
PLUG-ON TRANSMITTER

SPECIFICATIONS OVERVIEW
(SUBJECT TO CHANGE)
SLXD3 Plug-On Digital Wireless Transmitter converts any XLR source, including dynamic and condenser
Rechargeable Li-Ion microphones, for use as an SLX-D wireless transmitter. Featuring a patented locking ring for a secure,
Battery Type
or 1.5 V AA batteries
wobble-free connection, the SLXD3 sends 24-bit digital audio from any XLR source to an SLXD4 or SLXD5
Dimensions 4.9 × 1.6 × 1.6 in Digital Wireless receiver via rock-solid RF connection. Use IR Sync to pair transmitters easily and quickly with
(Dia. × L) (126 × 41 × 41 mm)
your choice of SLX-D wireless receiver. A full suite of optional rechargeability accessories enables wireless
Weight 7.0 oz. (200 g) excellence, wherever required, and the bright OLED screen displays battery life in hours and minutes when
used with the optional SB903 Rechargeable Lithium-Ion batteries. Includes SLXD3 plug-on transmitter, a pair of
Housing Aluminum, Zinc Alloy, PC/ABS
AA alkaline batteries, zippered carrying pouch and a leather protective sleeve with an integrated belt clip.

AUDIO INPUT
Configuration XLR
FEATURES
• Convert any XLR source for use within SLX-D wireless systems
Pad -12 dB: 20.5 dBV
Maximum Input Level 0 dB: 8.5 dBV • Provides +12–48 VDC phantom power for use with condenser microphones
1 kHz @ 1% THD Boost +12 dB: -3.5 dBV
Note: Dependent on Microphone Type • Patented locking mechanism for secure, wobble-free connection
Phantom Power +48 V (7 mA maximum) • Transparent 24-bit digital audio
+12 V (15 mA maximum) • Extended 20 Hz to 20 kHz frequency range (microphone dependent)

RF OUTPUT • 118 dB dynamic range

Antenna Type Dipole • Digital predictive switching diversity

• Switchable 1/10/30 mW power levels (region- and band-dependent)
Occupied Bandwidth <200 kHz
• 44 MHz tuning bandwidth (region dependent)
Modulation Type Shure Propietary Digital
• 32 available channels per frequency band (region dependent)
Power 1 mW/10 mW/30 mW
Varies by region. • Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
See Frequency Range and
Output Power Table. • Easy pairing of transmitters and receivers over scan and IR sync
Specific Absorption Rate <0.17 W/kg • Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery
(SAR)
• Rugged metal construction

shure.com SLXD3
Plug-On Transmitter
© 2024 Shure Incorporated
SLX-D DIGITAL WIRELESS
RECHARGEABLE POWER MANAGEMENT

SPECIFICATIONS
(SUBJECT TO CHANGE)

SB903 LI-ION RECHARGEABLE BATTERY

Charge Voltage 4.2 V (±0.03 V)

Charge Current
SBC10-903: 220 mA
SBC203: 625 mA (normal)
SB903 LITHIUM-ION
250 mA (reduced)
RECHARGEABLE BATTERY
Nominal Voltage 3.6 V
Want to know the exact amount of battery charge left? SB903
Nominal Capacity 1200 mAh rechargeable lithium-ion batteries unlock real-time battery
life and battery health features for SLX-D Digital Wireless
Housing Molded Polycarbonate
transmitters.
SBC10-903:
50 °F to 113 °F (10 °C to 45 °C)
Charging
Temperature Range SBC203:
50 °F to 113 °F (10 °C to 45 °C), normal
32 °F to 50 °F (0 °C to 10 °C), reduced
Dimensions 0.57 × 1.28 × 2.19 in
(H × W × L) (14.5 × 32.5 × 55.5 mm)

Weight 1 oz. (28 g) SB903

Rechargeable Lithium Ion Battery

SBC10-903 SINGLE BATTERY CHARGING SLED

DC Input Voltage Range 5 VDC

220 mA
Charge Current USB-powered

50%: 3 hours
Charge Time
SBC10-903 SINGLE
100%: 5 hours, 30 minutes

Charge Voltage 4.2 V

Charging
Temperature Range
50 °F to 113 °F
10 °C to 45 °C
BATTERY CHARGER FOR
Dimensions 0.81 × 1.48 ×3.13 in SB903 BATTERY
(H × W × L) (20.5 ×37.5 × 79.5 mm)
USB single battery charger can be powered from
Weight 1.3 oz (39 g)
A/C power sources and USB ports to charge one
Housing Molded Polycarbonate Shure SB903 Lithium-Ion Rechargeable Battery for
use with SLX-D Digital Wireless Transmitters.
POWER SUPPLY

Input Voltage Range 100 to 240 VAC SBC10-903

Single Battery Charging Sled
Operating Frequency 50 to 60 Hz

0.2 A
Maximum Input Power at 100 VAC full load

Output Voltage 4.75 to 5.25 VDC

Maximum Output Power 1.0 A at 5 VDC

Charging 32 °F to 140 °F (0 °C to 60 °C)

Temperature Range

shure.com
© 2024 Shure Incorporated
SLX-D DIGITAL WIRELESS
RECHARGEABLE POWER MANAGEMENT

SPECIFICATIONS SBC80-903 8-BAY BATTERY CHARGER FOR

(SUBJECT TO CHANGE)
SB903 LITHIUM-ION BATTERY
SBC80-903 8-BAY BATTERY CHARGER Recharging station for up to eight (8) SB903 rechargeable lithium ion batteries. The charging
Charge Current 625 mA cradle is designed to fit in a rackmount drawer and provides a full charge for installed
50%: 1 hour batteries in 3 hours. LED indicators illuminate to indicate battery health and charging status.
Charge Time
100%: 3 hours

External Power Supply PS60

Power Requirements 15 VDC, 4 A

Dimensions 1.18 × 6.81 × 5.75 in

(H × W × L) (30 × 173 × 146 mm)

Weight 13.2 oz (375 g)

Storage
-20 °F to 165 °F (-29 °C to 74 °C)
Temperature Range
Charging 32 °F to 113 °F (0 °C to 45 °C)
Temperature Range

SBC203 DUAL-DOCKING RECHARGING STATION

625 mA or 250 mA
Lower current used when using another
Charge Current power source, or operating between 32 °F
and 50 °F (0 °C and 10 °C)

50%: 1 hour, 15 minutes

Charge Time
100%: 2 hours, 30 minutes
SBC80-903
SBC10-USB15W or 8-Bay Battery Charger
External Power Supply
SBC10-USB15WS

Power Requirements 5 VDC, 3 A max

Charging Temperature
32 °F to 113 °F (0 °C to 45 °C)
Range for Battery

Dimensions 2.6 × 3.9 ×6.5 in SBC203 DUAL-DOCKING RECHARGING

STATION FOR SB903 LITHIUM-ION BATTERY
(H × W × L) (66 × 99 × 165 mm)
Weight 10.0 oz (284 g)
Housing ABS Dual docking recharging station charges two SB903 lithium-ion batteries in or out of their
transmitters. Built to charge two batteries, two body pack transmitters, two handheld
transmitters or any pairing of two SLX-D transmitters or SB903 batteries.
POWER SUPPLY
Input Voltage Range 100 to 240 VAC

Operating Frequency 50 to 60 Hz
Maximum Input Power 0.6 A at 100 VAC full load

Output Voltage 4.75 to 5.25 VDC

Maximum Output Power 3.0 A at 5 V

Operating 32 °F to 140 °F (0 °C to 60 °C)
Temperature Range

SBC203
Dual-Docking Reharging Station

shure.com
© 2024 Shure Incorporated