BIS HD 500 and 1501

Heavy Duty Clamps

walraven.com
 BIS Heavy Duty Clamps
Gives ‘strength’ to your installation!

With or without lining

The entirely renewed range BIS HD Clamps
consists of type HD 1501 (with noise
insulating lining) and type HD 500
(without lining) and includes a clamp for
each common pipe size.

High safe load

High safe loads CO2 welded Many connection options
All HD Clamps are very robust and with
that perfectly equipped for fixing heavier
pipes. Due to the CO2 welded connection
nut, the solid locking and the steel quality,
the HD Clamp is suitable for heavier loads.
Moreover the clamps have been perform-
ance tested in a fire situation.

Many connection possibilities

For each pipe size you can choose from at
least 2 connection nuts. With the separate
thread adaptors, if required, other connec-
tions can be made.

Rounded edges Captive locking Wide opening

nut and screw

Easy fixing There is sufficient space between both

clamp halves to place the pipe. The pipe can
The HD Clamps have no sharp edges or be assembled very quickly!
corners. The clamp ends have been well
finished and contribute to an uncomplicated Silicone lining
assembly.
For the fixing of steam pipes the HD Clamp
The locking nut is captive, hidden in a plastic is available with silicone lining. The lining
nut holder. Moreover the locking screws are is temperature resistant up to 200°C.
provided with an anti-loss washer. No more For further information you can contact our
time wasted with incomplete clamps and Sales Department.
loose parts!

To be able to place the pipe into the clamp,

only 1 locking screw needs to be unscrewed.
BIS HD 1501 with EPDM lining
Noise insulation according to DIN 4109

The BIS HD 1501 Clamp is supplied as It is also resistant to temperatures from

standard with a black EPDM rubber lining, -10° up to +90°C and for a limited time
which ensures noise insulation in accord- period from -40° up to +125°C.
ance with DIN 4109. The lining is durable
and ageing resistant.

Pipe Ø Bxs Fa,z Connection nut (G)

(mm) (“) (DN) (mm) (N) M8/M10 M10/M12 M16 1/2“ 3/4“
15 - 19 3/8 10 30 x 2,5 1.500 3313 3 019 - - 3317 3 019 -
19 - 23 1/2 15 30 x 2,5 1.500 3313 3 023 - - 3317 3 023 -
25 - 29 3/4 20 30 x 2,5 1.500 3313 3 029 - - 3317 3 029 -
30 - 35 1 25 30 x 2,5 1.500 3313 3 035 - - 3317 3 035 -
40 - 45 1¼ 32 30 x 2,5 1.500 3313 3 045 - - 3317 3 045 -
46 - 51 1½ 40 30 x 2,5 1.500 3313 3 051 - - 3317 3 051 -
53 - 59 - - 30 x 2,5 1.500 3313 3 059 - - 3317 3 059 -
59 - 64 2 50 30 x 2,5 1.500 3313 3 064 - 3316 3 064 3317 3 064 -
65 - 71 - - 30 x 3,0 2.300 - 3314 3 071 3316 0 071 3317 3 071 -
72 - 78 2½ 65 30 x 3,0 2.300 - 3314 3 078 3316 3 078 3317 3 078 3319 3 078
79 - 85 - - 30 x 3,0 2.300 - 3314 3 085 3316 3 085 3317 3 085 3319 3 085
86 - 92 3 80 30 x 3,0 2.300 - 3314 3 092 3316 3 092 3317 3 092 3319 3 092
101 - 109 - - 30 x 3,0 2.300 - 3314 3 109 3316 3 109 3317 3 109 3319 3 109
108 - 116 4 100 30 x 3,0 2.300 - 3314 3 116 3316 3 116 3317 3 116 3319 3 116
125 - 133 - - 30 x 3,0 2.300 - 3314 3 133 3316 3 133 3317 3 133 3319 3 133
132 - 140 5 125 30 x 3,0 2.300 - 3314 3 140 3316 3 140 3317 3 140 3319 3 140
159 - 169 6 150 38 x 4,0 3.800 - 3314 3 169 3316 3 169 3317 3 169 3319 3 169
178 - 188 - - 38 x 4,0 3.800 - 3314 3 188 3316 3 188 3317 3 188 3319 3 188
194 - 204 - - 38 x 4,0 3.800 - 3314 3 204 3316 3 204 3317 3 204 3319 3 204
203 - 213 - - 38 x 4,0 3.800 - 3314 3 213 3316 3 213 3317 3 213 3319 3 213
217 - 227 8 200 38 x 4,0 3.800 - 3314 3 227 3316 3 227 3317 3 227 3319 3 227
240 - 250 - - 38 x 4,0 3.800 - - 3316 3 250 3317 3 250 -
265 - 275 10 250 48 x 5,0 9.200 - - 3316 3 275 3317 3 275 -
315 - 325 12 - 48 x 5,0 9.200 - - 3316 3 325 3317 3 325 -
354 - 364 14 350 48 x 5,0 9.200 - - 3316 3 364 3317 3 364 -
398 - 408 16 400 48 x 5,0 9.200 - - 3316 3 408 3317 3 408 -
448 - 458 18 450 48 x 5,0 9.200 - - 3316 3 458 3317 3 458 -
499 - 509 20 500 48 x 5,0 9.200 - - 3316 3 509 3317 3 509 -
All articles are tested according to RAL-GZ 655/B and Ø 15 - 140 also tested according to RAL-GZ 656

RAL
The max. allowed load (Fa,z) is calculated using
specific statistical methods related to the breaking
load and taking into account a deflection of 1,5 mm
or 2% of the maximum nominal clamp diameter
(respectively according to RAL-GZ 655/B).
According to the RAL requirements, the test
results from above mentioned RAL certified articles RAL-GZ 655/B RAL-GZ 656
are monitored by an independent test institute. BIS HD 1501: Cert.Nr. 2011-12 Cert.Nr. 2011-14
BIS HD 500: Cert.Nr. 2011-13 Cert.Nr. 2011-05

12/2011 - Subject to modifications

BIS HD 500

Pipe Ø Bxs Fa,z Connection nut (G)

(mm) (“) (DN) (mm) (N) M8/M10 M10/M12 M16 1/2“ 3/4“
15 - 19 3/8 10 30 x 2,5 2.100 3303 3 019 - - 3307 3 019 -
19 - 23 1/2 15 30 x 2,5 2.100 3303 3 023 - - 3307 3 023 -
25 - 30 3/4 20 30 x 2,5 2.100 3303 3 030 - - 3307 3 030 -
31 - 36 1 25 30 x 2,5 2.100 3303 3 036 - - 3307 3 036 -
37 - 42 - - 30 x 2,5 2.100 3303 3 042 - - 3307 3 042 -
40 - 45 1¼ 32 30 x 2,5 2.100 3303 3 045 - - 3307 3 045 -
47 - 52 1½ 40 30 x 2,5 2.100 3303 3 052 - - 3307 3 052 -
53 - 58 - - 30 x 2,5 2.100 3303 3 058 - - 3307 3 058 -
59 - 65 2 50 30 x 2,5 2.100 3303 3 065 - - 3307 3 065 -
66 - 71 - - 30 x 3,0 2.100 3303 3 071 - - 3307 3 071 -
72 - 78 2½ 65 30 x 3,0 4.000 - 3304 3 078 - 3307 3 078 3309 3 078
79 - 85 - - 30 x 3,0 4.000 - 3304 3 085 - 3307 3 085 3309 3 085
86 - 92 3 80 30 x 3,0 4.000 - 3304 3 092 - 3307 3 092 3309 3 092
98 - 106 - - 30 x 3,0 4.000 - 3304 3 106 - 3307 3 106 3309 3 106
108 - 116 4 100 30 x 3,0 4.000 - 3304 3 116 - 3307 3 116 3309 3 116
125 - 133 - - 30 x 3,0 4.000 - 3304 3 133 - 3307 3 133 3309 3 133
132 - 140 5 125 30 x 3,0 4.000 - 3304 3 140 - 3307 3 140 3309 3 140
148 - 154 - - 30 x 3,0 4.000 - 3304 3 154 - 3307 3 154 3309 3 154
159 - 169 6 150 38 x 4,0 8.200 - 3304 3 169 - 3307 3 169 3309 3 169
173 - 183 - - 38 x 4,0 8.200 - 3304 3 183 - 3307 3 183 3309 3 183
192 - 202 - - 38 x 4,0 8.200 - 3304 3 202 - 3307 3 202 3309 3 202
208 - 218 - - 38 x 4,0 8.200 - 3304 3 219 - 3307 3 219 3309 3 219
217 - 227 8 200 38 x 4,0 8.200 - 3304 3 227 3306 3 227 3307 3 227 3309 3 227
229 - 241 - - 38 x 4,0 8.200 - - 3306 3 241 3307 3 241 3309 3 241
244 - 254 - - 38 x 4,0 8.200 - - 3306 3 254 3307 3 254 3309 3 254
254 - 264 - - 38 x 4,0 8.200 - - 3306 3 264 3307 3 264 -
267 - 279 10 250 38 x 4,0 8.200 - - 3306 3 279 3307 3 279 -
279 - 289 - - 48 x 5,0 12.000 - - 3306 3 289 3307 3 289 -
292 - 302 - - 48 x 5,0 12.000 - - 3306 3 302 3307 3 302 -
315 - 325 12 300 48 x 5,0 12.000 - - 3306 3 325 3307 3 325 -
350 - 360 14 350 48 x 5,0 12.000 - - 3306 3 360 3307 3 360 -
364 - 374 - - 48 x 5,0 12.000 - - 3306 3 374 3307 3 374 -
379 - 389 - - 48 x 5,0 12.000 - - 3306 3 389 3307 3 389 -
398 - 408 16 400 48 x 5,0 12.000 - - 3306 3 408 3307 3 408 -
408 - 418 - - 48 x 5,0 12.000 - - 3306 3 418 3307 3 418 -
424 - 436 - - 48 x 5,0 12.000 - - 3306 3 436 3307 3 436 -
448 - 458 18 450 48 x 5,0 12.000 - - 3306 3 458 3307 3 458 -
499 - 509 20 500 48 x 5,0 12.000 - - 3306 3 509 3307 3 509 -
All articles are tested according to RAL-GZ 655/B and Ø 15 - 154 also tested according to RAL-GZ 656
BIS HD 500 and 1501
Many connection possibilities

The standard range covers the most com-

mon combinations of pipe clamp and
connection. With the separately available
thread adaptors it is possible to reduce the
1/2” connection to M16 or to increase to
3/4” or 1”.

Thread adaptors

Male x female thread Part No.

1/2” x M16 647 3 521
1/2” x 3/4” 647 3 621
1/2” x 1” 647 3 721

Also in stainless steel!

The zinc plated HD Clamps are perfectly For this purpose both the HD 500 and the
suitable for most mechanical installations. HD 1501 Clamps are available on request
However, in the food industry, laboratories, in stainless steel 1.4401 (AISI-no. 316).
sewage treatment plants, tunnel building
or other corrosive surroundings generally For more information you can contact our
stainless steel must be supplied. Sales Department.

Technical characteristics

Made of steel, zinc plated Noise insulation according to DIN 4109 Nut holder made of polypropylene, green.
Connection nut: CO2 welded Temperature range: Resistant to dilute acids, lyes, salts and
Tested on fire safety -10° up to +90°C (continuously) a great number of organic solvents. Not
Noise insulating lining made of EPDM -40° up to +125°C (short time) resistant to concentrated, oxidizing acids.
rubber, black

Summary of benefits

Robust design for heavy loads Easy to install, only 1 locking screw needs Unlimited connection possibilities:
Perfect fit for all pipe sizes to be unscrewed enable fitting of the pipe with a thread adaptor the connection
Pleasant to work with because of: Well-considered connection sizes: size can be easily changed into M16,
Rounded shape Whole range with 1/2“ connection nut 3/4” or 1”
Plastic nut holder(1) keeps the locking- Combi nut M8/M10 for pipe up to and
(1)
nut captive including 2” To all clamps with material width of
Anti-loss washer prevents the screw Combi nut M10/M12 for pipe up to and 30 mm
from falling out during assembly including 8”

12/2011 - Subject to modifications

The right combination
The Walraven pipe fixing system includes Possible combinations:
many other products, which can be com-
bined perfectly with the BIS HD Clamps. BIS RapidStrut ® System
BIS Wall Plates
BIS dB-FiX® Fixing Point Assemblies

BIS RapidStrut® System

Unique and universal system for framework

and support in heavier installations.
The BIS RapidStrut ® System includes all
regular sizes of Strut rails and an unprec-
edented wide range of accessories such
as T-bolt assemblies, slide nuts and rail
connectors. The accessories are completely
preassembled and ‘ready-to-use‘. They offer
maximum fixing convenience.
No more loose parts!
With BIS RapidStrut ® you can do the job
in a flash!

Insert Turn 1/4 stroke Slide Lock

BIS Wall Plates

These heavy design wall plates with

CO2 welded nut are suitable for a load of
no less than 6.000 N. To simplify the fixing,
the fixing slots have been carried out as a
slot breach under 90° with regard
to each other.

BIS dB-FiX® Fixing Point

Assemblies

For making a noise insulating fixing point

with the BIS HD 500 Clamp. The EPDM
BIS HD 500 + 1501 (EN) - 12/2011 - 28 - Subject to modifications

rubber moulded pieces ensure an excellent

noise insulation, in accordance with DIN
4109.
Type Part No. Connec- For
tion size pipe
BIS dB-FiX® 80 669 3 008 M10 *2”
BIS dB-FiX® 200 669 3 020 M12 *4”
*Up to and including