Scribd
Upload
34 views3 pages

H8-PSM Tech Spec

Uploaded by

Michael Antonio Guido Vasquez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
34 views3 pages

H8-PSM Tech Spec

Uploaded by

Michael Antonio Guido Vasquez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Technical specification

Hygienic Gasketed Plate Heat Exchanger

Project ref. CCN GLICOL Page 1 of 3


Model H8-PSM Date 2025-06-02
No. of units 1

Main duty

Section Flow rate (kg/h) Fluid Temperature (°C)


16 000 20 % Sugar 2,0 ← 31,0
I 88 723 20.0% Eth.glycol -5,0 → 0,0

Plates and gaskets

Section Number of plates Heat transfer area () Plate material/thickness Gasket material/attachment
All ALLOY 316/ 0.5 NBRP/ ClipGrip™

Extension capacity
The recommended minimum CIP flow rate is _______ kg/h.
Allow for approximately ___ kPa pressure drop during CIP.

Heat exchanger calculation


Pressure vessel approval PED Category II
Design pressure (MAWP) 10,00 bar
Test pressure 14,40 bar
Design temperature max. 120,0 °C
Design temperature min. -10,0 °C

The performance of the equipment is conditioned by the process media and process parameters being consistent with the provided customer
data. Data, specifications, and other kind of information of technological nature set out in this document and submitted by Alfa Laval to you
(Proprietary Information) are intellectual proprietary rights of Alfa Laval. The Proprietary Information shall remain the exclusive property of Alfa
Laval and shall only be used for the purpose of evaluating Alfa Laval's quotation. The Proprietary Information may not, without the written
consent of Alfa Laval, be used or copied, reproduced, transmitted or communicated or disclosed in any other way to a third party.
Technical specification
Hygienic Gasketed Plate Heat Exchanger
Project ref. CCN GLICOL Page 2 of 3
Model H8-PSM Date 2025-06-02
No. of units 1

Section I H8-PSM, plates, ALLOY 316, 0.5 mm, NBRP


Left side Right side
Fluid 20.0% Eth.glycol 20 % Sugar
Density 1 035,7kg/m³ 1 079,5 kg/m³
Specific heat capacity 3,87 kJ/(kg·K) 3,70 kJ/(kg·K)
Thermal conductivity 0,506 W/(m·K) 0,528 W/(m·K)
Viscosity (In) 3,6915 cP 1,4598 cP
Viscosity (Out) 3,0802 cP 3,4994 cP

Flow rate 88 723 kg/h 16 000 kg/h


Inlet temperature -5,0 °C 31,0 °C
Outlet temperature 0,0 °C 2,0 °C
Pressure drop 679,8 kPa 25,7 kPa
Heat exchanged 477,3 kW
LMTD 16,1 K
Heat transfer coefficient 2 026,1 W/(m²·K)
Heat transfer area 14,61 m²
Relative directions of fluids Counter current
Efficiency Margin 75,0 %
Effective fouling resistance * 2,00 m²·K/W
10000

The performance of the equipment is conditioned by the process media and process parameters being consistent with the provided customer
data. Data, specifications, and other kind of information of technological nature set out in this document and submitted by Alfa Laval to you
(Proprietary Information) are intellectual proprietary rights of Alfa Laval. The Proprietary Information shall remain the exclusive property of Alfa
Laval and shall only be used for the purpose of evaluating Alfa Laval's quotation. The Proprietary Information may not, without the written
consent of Alfa Laval, be used or copied, reproduced, transmitted or communicated or disclosed in any other way to a third party.
Technical specification
Hygienic Gasketed Plate Heat Exchanger
Project ref. CCN GLICOL Page 3 of 3
Model H8-PSM Date 2025-06-02
No. of units 1

Accessories added to configuration Quantity


Accessories

Equipment
Spanner M20 1
Protection tube Stainless steel 1

Documents and services

Documents
Documents English-Alfa Laval-Installation manual 1

The performance of the equipment is conditioned by the process media and process parameters being consistent with the provided customer
data. Data, specifications, and other kind of information of technological nature set out in this document and submitted by Alfa Laval to you
(Proprietary Information) are intellectual proprietary rights of Alfa Laval. The Proprietary Information shall remain the exclusive property of Alfa
Laval and shall only be used for the purpose of evaluating Alfa Laval's quotation. The Proprietary Information may not, without the written
consent of Alfa Laval, be used or copied, reproduced, transmitted or communicated or disclosed in any other way to a third party.

You might also like