0% found this document useful (0 votes)
9 views1 page

BMW F25 Cheat Sheet

The F25 Coding Cheat Sheet provides a list of coding functions for various modules in the vehicle, detailing their descriptions, function values, and comments. It includes features such as unlocking doors, closing windows via key fob, disabling legal disclaimers, and adjusting camera settings. Some functions are marked as 'Not Tested' or specific to the F10 model, indicating varying levels of implementation and functionality.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
9 views1 page

BMW F25 Cheat Sheet

The F25 Coding Cheat Sheet provides a list of coding functions for various modules in the vehicle, detailing their descriptions, function values, and comments. It includes features such as unlocking doors, closing windows via key fob, disabling legal disclaimers, and adjusting camera settings. Some functions are marked as 'Not Tested' or specific to the F10 model, indicating varying levels of implementation and functionality.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

F25 Coding Cheat Sheet

Working Description Module Section Function Value New Value Default Comments

Yes Unlock doors when engine is stopped. Allows single pull to open doors. CAS 3002 CLM ER_KEYOUT_AUTOVR aktiv / Werte=01 nicht_aktiv / Werte=00
Doors must autolock via I drive settings to unlock

CAS 3003 FH MASTER KOMFORTSCHLIESSUNG_FB aktiv / Werte=01 nicht_aktiv / Werte=00


Yes Close mirrors + windows + moon roof through key FOB
FRM 3020 ASP_BEIKLAPPEN_BEI_KOMFORTSC HLIESSEN
aktiv / Werte=01 nicht_aktiv / Werte=00
CAS 3003 FH MASTER KOMFORTSCHLIESSUNG_PA aktiv / Werte=01 nicht_aktiv / Werte=00
Yes Close mirrors + windows + moon roof through Comfort Access
FRM 3020 ASP_BEIKLAPPEN_BEI_KOMFORTSC HLIESSEN
aktiv / Werte=01 nicht_aktiv / Werte=00
HKFM 3010 SCH_FBD aktiv / Werte=01 nicht_aktiv / Werte=00
Yes Close Trunk/ Tailgate through button on FOB
HKFM 3010 TASTER_FBD aktiv / Werte=01 nicht_aktiv / Werte=00
HKFM 3010 SCH_TOEHKI Takes 1-2 hours to work
Yes Close Trunk/ Tailgate through button on driver side
HKFM 3010 TASTER_FBD Takes 1-2 hours to work
HU_CIC 3000 HMI SPEEDLOCK_X_KMH_MAX value = FF 3_kmh = 3 or 8_kmh = 8
Yes DVD in Motion HU_CIC 3000 HMI SPEEDLOCK_X_KMH_MIN value = FF 3_kmh = 3 or 8_kmh = 8
HU_CIC 3000 HMI VIDEO_NUR_MIT_HANDBREMSE nicht_aktiv / Werte=00
aktiv / Werte=01
Yes Disables iDrive legal disclaimer during iDrive startup. HU_CIC 3001 EXBOX LEGAL_DISCLAIMER_TIME kein_ld ld_mit_timeout
Yes HU_CIC 3001 EXBOX MACRO_CAM_LEGALDISCLAIMER kein_ld ld_mit_timeout
Disables camera legal disclaimer
Yes HU_CIC 3001 EXBOX MACRO_NIVICAM_LDISCLAIMER kein_ld ld_mit_timeout
Yes Add Pressure and Temperature Readings to the TPMS Screen HU_CIC 3001 EXBOX RDC_SAFETY aktiv / Werte=01 nicht_aktiv / Werte=00
Yes The telephone ringtone is transferred to the Combox CMB_MEDIA 3001TELEPHONE_PARAMETE
INBAND_RINGING
R aktiv / Werte=01 nicht_aktiv / Werte=00
Yes max distance in meters to disable top camera view - Change to Werte = FF PDC 3009 D_SCHWELLE_1 Werte=FF Abschaltschwelle_ab_09-09 /Werte = 32
Yes max distance in meters to disable rear camera view - Change to Werte = FF PDC 3009 D_SCHWELLE_2 Werte=FF Abschaltschwelle_ab_09-09 /Werte = 0A
Yes max speed to disable top camera view - Change to Werte = FF PDC 3009 V_SCHWELLE_1 Werte=FF Abschaltschwelle_ab_09-09 /Werte = 24
Yes max speed to disable rear camera view - Change to Werte = FF PDC 3009 V_SCHWELLE_2 Werte=FF Abschaltschwelle_ab_09-09 /Werte = 0F
Yes Comment = Maximum speed at which side view may be activated. (except reversing) - Part 1 TRSVC 3000 SV_Activate_Speed_Limit Werte=FF initwert / Werte=0F
Yes Comment = speed above which side view will deactivated. Side View cameras to stay on all the time (except reversing) - Part TRSVC
2 3000 SV_Deactivate_Speed Werte=FF initwert / Werte=0F
Yes Speed in BC KOMBI 3000 Anzeige_Konfiguration
BC_DIGITAL_V aktiv / Werte=01 nicht_aktiv / Werte=00
Yes Weather Band Channels in Radio HU_CIC 3000 HMI RADIO_WEATHERBAND aktiv / Werte=01 nicht_aktiv / Werte=00
Yes Slider Adjustment in for Audio tone Settings HU_CIC 3000 HMI L7_SURROUND_CONFIG aktiv / Werte=01 nicht_aktiv / Werte=00
Not Tested Tell you at what point(s) along your journey you'll likely need to fill up. HU_CIC 3000 HMI NAVI_FUELSTOP_PROPOSAL aktiv / Werte=01 nicht_aktiv / Werte=00
Not Tested Increase CIC stored addresses/messages from 25 to 50 CMB_MEDIA 3006 TELEMATIK MY_INFO_SUPPORTED_POIS Need to explore
F10 Only? Opening doors (FRONT) will not interrupt window roll up operation. FRM? 3030 FH_TUER_AUF_STOP_MAUT
Not Tested Turns on night/day detection for Nav NAVI_MAPMODE_AUTOMATIC aktiv / Werte=01 nicht_aktiv / Werte=00
Not Tested close sunroof with auto wipers and rain SHD: REGENSCHLIESSEN
Not Tested disable seat belt reminder - driver ACSM 3000 Ausstattungsflags
SBR_FA_GWF_SBR_FA not active = 00 active = 01
Not Tested disable seat belt reminder - passenger ACSM 3000 Ausstattungsflags
SBR_BF_GWF_SBR_BF not active = 00 active = 01
Not Tested disable seat belt status display - driver ACSM 3000 Ausstattungsflags
Gurtzustandsanzeige_Fahrer_GWF_GZA_FA
not active = 00 active = 01
Not Tested disable seat belt status display - passenger ACSM 3000 Ausstattungsflags
Gurtzustandsanzeige_Beifahrer_GWF_GZA_BF
not active = 00 active = 01
Not Tested disable sound on disconnect SB - driver ACSM 3000 Ausstattungsflags
SPW_FA not active = 00 active = 01
Not Tested disable sound on disconnect SB - passenger ACSM 3000 Ausstattungsflags
SPW_BF not active = 00 active = 01
F10 Only? Opening doors will not interrupt window roll up operation. Normally, if you open a door while the window is automatically rollingFRM
up, it will stop the operation.
3030 FRMThis
FH feature
PARAMETER
FH_TUER_AUF_STOP_MAUT
disables it. May need to wait for iDrive to reset
nicht_aktiv
for activation aktiv
F10 Only? Change to nicht_aktiv to enbale Fog Lights with High Beams / Flashers FRM 3050 FRM NSW_AUS_BEI_FL
F10 Only? High Beam Brightness in % FRM 3050 FRM HELLIGKEIT_FL_BIXENON
F10 Only? DRL Brightness in % FRM 3050 FRM HELLIGKEIT_DRL
F10 Only? 0: DRL disabled; 1: DRL_H via beam, halogen U.S. (without lights); 2: DRL_L via low beam; 3: DRL_S via separate TFLeuchte;FRM
U.S. Xenon (rings +3050
bottom);
FRM4: TFL_S via
DRL_MODUS
separate TFLeuchte; ECE Xenon (rings + bottom); 5: TFL_ECE (North Country Comfort); 6: DRL_S_ohne_SL via separate TFLeuchte without tailli
Untested Eco Pro Mode always on? For the F30, set ICM / IcmKod_B_InitEco to verbaut to always start in Eco-Pro mode.

You might also like