NC TOOL STORAGE

Start working more efficiently by organizing your NC tools as well as your inventory! Constructed from extruded aluminum Stanley Vidmar NC tool storage components are designed to carry all of your tools in a safe, well-organized fashion. Choose your Stanley Vidmar tool holders based on the size and style of the tool assemblies to be handled: V-flange tooling, straight shank tooling, or modular tooling (e.g., KM, HSR, Capto, etc.).

23" TOOLHOLDER INSERTS

Toolholder inserts 23" (584mm) are used with lift-out trays and accomplish the same purpose as single toolholder inserts but when side-to-side spacing of tool assemblies is constant.

25" FIXED TOOLHOLDERS

Fixed toolholders 25" long (635mm) are used when side-to-side spacing of tool assemblies is constant and removable toolholders are not required. Lift-out tool trays are used to move multiple tool assemblies by hand from mobile tool carts to tool storage devices or workbenches. Note: Lift-out trays are not recommended with tools larger than 40 V-flange due to ergonomic considerations.

Pictured: VTT200 with 8-TH2532M5 in Bright Blue (S22447)

Three steps to determine which toolholder arrangement is best for you.

1. Decide whether fixed toolholders or lift-out trays will work best. 2. If lift-out tool trays are used 23" (584mm) long toolholder inserts will work best for you. 3. Choose the specific model number based on the size and style of tool assemblies to be handled.
Pictured: STD02W with 1-20, 3-30, 1-90, 1-DRPs02 with 5-TH2532M5 in Bright Blue (S22447) Housing and Off-White (S22570) Drawers

23" (584mm) Toolholder Inserts

25" (635mm) Fixed Toolholders

56

S t a n l e y V i d m a r. c o m

PRE-ENGINEERED MOBILE TOOL CARTS

25" (635mm) Fixed Toolholders

MODEL # (/N) TAXI CAPACITY " (MM) TOOLHOLDERS /6 /8 (6 OR 8 EA.)

VTT200xxx/N VTT20050V/N VTT20045V/N VTT20040V/N VTT20030V/N VTT200250ST/N VTT200225ST/N VTT200200ST/N VTT200175ST/N VTT200150ST/N VTT200125ST/N VTT200100ST/N

50 V-Flange 45 V-Flange 40 V-Flange 30 V-Flange 2-1/2" (64mm) St. Shank 2-1/4" (57mm) St. Shank 2" (51mm) St. Shank 1-3/4" (44mm) St. Shank 1-1/2" (38mm) St. Shank 1-1/4" (32mm) St. Shank 1" (25mm) St. Shank

30 30 48 48 30 30 30 48 48 48 48

40 40 64 64 40 40 40 64 64 64 64

TH2550V5 TH2545V5 TH2540V8 TH2530V8 TH25250ST5 TH25225ST5 TH25200ST5 TH25175ST8 TH25150ST8 TH25125ST8 TH25100ST8

*When ordering, use the required designation (/6 or /8) for taxi capacity to replace /N in the Model #

23" (584mm) Removable Toolholders

MODEL # (/N) TAXI CAPACITY " (MM) TOOLHOLDERS /6 /8 (6 OR 8 EA.)

Model # VTT200xxx/N

VTT210xxx/N VTT21040V/N VTT21030V/N VTT210250ST/N VTT210225ST/N VTT210200ST/N VTT210175ST/N VTT210150ST/N VTT210125ST/N VTT210100ST/N

40 V-Flange 30 V-Flange 2-1/2" (64mm) St. Shank 2-1/4" (57mm) St. Shank 2" (51mm) St. Shank 1-3/4" (44mm) St. Shank 1-1/2" (38mm) St. Shank 1-1/4" (32mm) St. Shank 1" (25mm) St. Shank

48 48 30 30 30 48 48 48 48

64 64 40 40 40 64 64 64 64

TH2340V8 TH2330V8 TH23250ST5 TH23225ST5 TH23200ST5 TH23175ST8 TH23150ST8 TH23125ST8 TH23100ST8

*When ordering, use the required designation (/6 or /8) for taxi capacity to replace /N in the Model #

25" (635mm) Fixed Toolholders

MODEL # (/N) TAXI CAPACITY " (MM) TOOLHOLDERS /6 /8 (6 OR 8 EA.)

VTT201xxx/N VTT20150V/N VTT20145V/N VTT20140V/N VTT20130V/N VTT201250ST/N VTT201225ST/N VTT201200ST/N VTT201175ST/N VTT201150ST/N VTT201125ST/N VTT201100ST/N

50 V-Flange 45 V-Flange 40 V-Flange 30 V-Flange 2-1/2" (64mm) St. Shank 2-1/4" (57mm) St. Shank 2" (51mm) St. Shank 1-3/4" (44mm) St. Shank 1-1/2" (38mm) St. Shank 1-1/4" (32mm) St. Shank 1v (25mm) St. Shank

30 30 48 48 30 30 30 48 48 48 48

40 40 64 64 40 40 40 64 64 64 64

TH2550V5 TH2545V5 TH2540V8 TH2530V8 TH25250ST5 TH25225ST5 TH25200ST5 TH25175ST8 TH25150ST8 TH25125ST8 TH25100ST8

*When ordering, use the required designation (/6 or /8) for taxi capacity to replace /N in the Model #

23" (584mm) Removable Toolholders

MODEL # (/N) TAXI CAPACITY " (MM) TOOLHOLDERS /6 /8 (6 OR 8 EA.)

Model # VTT211xxx/N

VTT211xxx/N VTT21140V/N VTT21130V/N VTT211250ST/N VTT211225ST/N VTT211200ST/N VTT211175ST/N VTT211150ST/N VTT211125ST/N VTT211100ST/N

40 V-Flange 30 V-Flange 2-1/2" (64mm) St. Shank 2-1/4" (57mm) St. Shank 2" (51mm) St. Shank 1-3/4" (44mm) St. Shank 1-1/2" (38mm) St. Shank 1-1/4" (32mm) St. Shank 1" (25mm) St. Shank

48 48 30 30 30 48 48 48 48

64 64 40 40 40 64 64 64 64

TH2340V8 TH2330V8 TH23250ST5 TH23225ST5 TH23200ST5 TH23175ST8 TH23150ST8 TH23125ST8 TH23100ST8

*When ordering, use the required designation (/6 or /8) for taxi capacity to replace /N in the Model #

S t a n l e y V i d m a r. c o m

57

PRE-ENGINEERED MOBILE TOOL CARTS

25" (635mm) Fixed Toolholders

MODEL # (/N) TAXI CAPACITY " (MM) TOOLHOLDERS /6 /8 (6 OR 8 EA.)

VTT202xxx/N VTT20250V/N VTT20245V/N VTT20240V/N VTT20230V/N VTT202250ST/N VTT202225ST/N VTT202200ST/N VTT202175ST/N VTT202150ST/N VTT202125ST/N VTT202100ST/N

50 V-Flange 45 V-Flange 40 V-Flange 30 V-Flange 2-1/2" (64mm) St. Shank 2-1/4" (57mm) St. Shank 2" (51mm) St. Shank 1-3/4" (44mm) St. Shank 1-1/2" (38mm) St. Shank 1-1/4" (32mm) St. Shank 1" (25mm) St. Shank

30 30 48 48 30 30 30 48 48 48 48

40 40 64 64 40 40 40 64 64 64 64

TH2550V5 TH2545V5 TH2540V8 TH2530V8 TH25250ST5 TH25225ST5 TH25200ST5 TH25175ST8 TH25150ST8 TH25125ST8 TH25100ST8

*When ordering, use the required designation (/6 or /8) for taxi capacity to replace /N in the Model #

23" (584mm) Removable Toolholders

MODEL # (/N) TAXI CAPACITY " (MM) TOOLHOLDERS /6 /8 (6 OR 8 EA.)

Model # VTT222xxx/N

VTT212xxx/N VTT21240V/N VTT21230V/N VTT212250ST/N VTT212225ST/N VTT212200ST/N VTT212175ST/N VTT212150ST/N VTT212125ST/N VTT212100ST/N

40 V-Flange 30 V-Flange 2-1/2" (64mm) St. Shank 2-1/4" (57mm) St. Shank 2" (51mm) St. Shank 1-3/4" (44mm) St. Shank 1-1/2" (38mm) St. Shank 1-1/4" (32mm) St. Shank 1" (25mm) St. Shank

48 48 30 30 30 48 48 48 48

64 64 40 40 40 64 64 64 64

TH2340V8 TH2330V8 TH23250ST5 TH23225ST5 TH23200ST5 TH23175ST8 TH23150ST8 TH23125ST8 TH23100ST8

*When ordering, use the required designation (/6 or /8) for taxi capacity to replace /N in the Model #

CNC TOOL STORAGE CABINET

Available in two heights and 12 drawer configurations Includes Single Drawer Release feature to prevent opening more than one drawer at a time Models listed include five 25" (635mm) fixed toolholders in each drawer All CNC cabinets must be securely anchored to the floor or bolted back to back Drawers may also have a full front

CNC Tool Storage Cabinet

MODEL #1 TOOL CAP. # OF DRAWERS V-FLANGE AVG. USABLE H2 VS AND M AVG. USABLE H2 CABINET HEIGHT

CNC34050V100 CNC34045V100 CNC34050V75 CNC34045V75 CNC34040V160 CNC34035V160 CNC34030V160 CNC24550V75 CNC24545V75 CNC24540V120 CNC24530V120
2

100 100 75 75 160 160 160 75 75 120 120

4 4 3 3 4 4 4 3 3 3 3

7-1/4" (184mm) 8-1/4" (210mm) 11" (279mm) 12" (305mm) 8-1/4" (210mm) 9-1/2" (241mm) 9-1/2" (241mm) 6-1/2" (165mm) 7-1/2" (191mm) 7-1/2" (191mm) 8-3/4" (222mm)

9-1/2" (241mm) 9-1/2" (241mm) 16" (406mm) 16" (406mm) 9-1/2" (241mm) 9-1/2" (241mm) 9-1/2" (241mm) 8-3/4" (222mm) 8-3/4" (222mm) 8-3/4" (222mm) 8-3/4" (222mm)

59" (1499mm) 59" (1499mm) 59" (1499mm) 59" (1499mm) 59" (1499mm) 59" (1499mm) 59" (1499mm) 44" (1118mm) 44" (1118mm) 44" (1118mm) 44" (1118mm)

Note: 1ReplaceV in model number withST for straight, M orHSK for modular tooling. Usable height is measured from the top of the 25" (635mm) fixed toolholder to the bottom of the next drawer front above. Dimension from bottom of flange to top of tool should not exceed this.

58

S t a n l e y V i d m a r. c o m

MOBILE TOOL CARTS

Designed to meet your tool storage and delivery requirements
VTTRT200

Available with a range of accessories including: rear tray, storage cabinet with lockable door, adjustable shelf, card holder for paperwork, etc. For increased capacity, fixed 22" (559mm) toolholders can be provided for attachment to the front or rear of the mobile tool cart

RTH50V5

VTTAT200 VTTSD200

Mobile Tool Cart

MODEL # VTT200 *VTT201 *VTT202 *VTTSC200 VTTSD200 VTTAT200 VTTRT200 RTH50V5 *RTH45V5 DESCRIPTION 200 Series Mobile Tool Cart 200 Series Mobile Tool Cart w/Rear Tray 200 Series Mobile Tool Cart w/Cabinet and Door Storage Cabinet w/Three Shelves Storage Cabinet w/Three Shelves, Door, and Lock Adjustable Storage Tray Rear Tray Assembly Rear Toolholder Assembly (50V, 5) Rear Toolholder Assembly (45V, 5) LENGTH 33" (838mm) 41" (1041mm) 41" (1041mm) 8" (203mm) 8" (203mm) 25" (635mm) 8" (203mm) 5" (127mm) 5" (127mm) WIDTH 23" (584mm) 23" (584mm) 23" (584mm) 22-7/8" (581mm) 22-7/8" (581mm) 22-7/8" (581mm) 22-7/8" (581mm) 22-7/8" (581mm) 22-7/8" (581mm) HEIGHT 39-1/4" (997mm) 39-1/4" (997mm) 39-1/4" (997mm) 31-5/8" (803mm) 31-5/8" (803mm) 1-5/8" (41mm) 1-5/8" (41mm) 9-1/2" (241mm) 9-1/2" (241mm)

VTT200

*Not shown

FLOOR STAND TOOL RACK

Model # FLTHR A simple inexpensive means of storing tooling at machining centers or work areas Either single or 23" (584mm) toolholder inserts (both shown) attach to extruded aluminum toolholder rails without screws or hand tools Three model THR-23 toolholder rails are included Up to 10 positions are available for toolholder rails on each side Toolholders and trays are ordered separately 27-1/4" (705mm) x 26-3/4" (679mm) x 59" (1499mm)
Note: Shipped knocked down. All floor stands should be securely anchored.

UNIVERSAL FLOOR STAND

Model # FLTS Designed to work with mobile tool carts or CNC storage cabinets Provide ready access to preset tooling adjacent to machining areas The tool stand will accept either 10 fixed toolholders (as shown), six lift-out trays, or a combination of each Toolholders and trays are ordered separately 24-3/16" (614mm) x 28" (711mm) x 59-3/16" (1503mm)
Note: Shipped knocked down. All floor stands should be securely anchored.

Floor Stand Tool Rack

Universal Floor Stand

S t a n l e y V i d m a r. c o m

59

BENCHTOP TOOL STAND

Model # BTTS Stores three rows of toolholders or lift-out trays Shipped knocked down Accepts either lift-out trays or fixed toolholders 18-7/16" (468mm) x 27" (686mm) x 12-3/16" (310mm)
Benchtop Tool Stand

BENCHTOP TOOL RACK

Model # BTTHR Holds tooling on a bench or other work surface Shipped knocked down 8" (203mm) x 24" (610mm) x 8" (203mm) Includes one THR-23 toolholder rail Toolholders not included
Benchtop Tool Rack

TOOLHOLDERS AND ACCESSORIES

Toolholders and Accessories

TOOL SIZE 23" (584MM) TOOLHOLDER INSERT MODEL # TOOL CAP. 25" (635MM) TOOLHOLDER MODEL # TOOL CAP.

V-Flange

V-Flange

Straight Shank

050 V-Flange 45 V-Flange 40 V-Flange 30 V-Flange 2-1/2" (64mm) St. Shank 2-1/4" (57mm) St. Shank 2" (51mm) St. Shank 1-3/4" (44mm) St. Shank 1-1/2" (38mm) St. Shank 1-1/4" (32mm) St. Shank 1" (25mm) St. Shank

Modular-CAPTO

Straight Shank

Modular-HSK

Modular-KM
(special adapters also available for TM Smith tooling)

Modular-KM

Miscellaneous

32KM Modular 40KM Modular 50KM Modular 63KM Modular Blank Aluminum Blank Alum (Short) #200 Kwik Switch #300 Kwik Switch

TH2350V5 TH2345V5 TH2340V8 TH2330V8 TH23250ST5 TH23225ST5 TH23200ST8 TH23175ST8 TH23150ST8 TH23125ST8 TH23100ST8 TH23C38 TH23C48 TH23C58 TH23C68 TH23C85 TH23HSK328 TH23HSK408 TH23HSK508 TH23HSK638 TH23HSK805 TH2332M8 TH2340M8 TH2350M5 TH2363M5 TH23000 TH2300S0 TH23200Q10 TH23300Q9

5 5 8 8 5 5 8 8 8 8 8 8 8 8 8 5 8 8 8 8 5 8 8 5 5 Variable Variable 10 9

TH2550V5 TH2545V5 TH2540V8 TH2530V8 TH25250ST5 TH25225ST5 TH25200ST8 TH25175ST8 TH25150ST8 TH25125ST8 TH25100ST8 TH25C38 TH25C48 TH25C58 TH25C68 TH25C85 TH25HSK328 TH25HSK408 TH25HSK508 TH25HSK638 TH25HSK805 TH2532M8 TH2540M8 TH2550M8 TH2563M5 TH25000 TH2500S0 TH25200Q10 TH25300Q9

5 5 8 8 5 5 8 8 8 8 8 8 8 8 8 5 8 8 8 8 5 8 8 8 5 Variable Variable 10 9

Drawer Toolholder Supports - 25" (635mm) Lift-Out Tray

MODEL # A, B, " (MM) M" " (MM) DRAWER SIZE MODEL # DESCRIPTION
2

HEIGHT

TT625 TT450

6" (153mm) Less than 4" (102mm)

11-1/4" (286mm) 9-3/16" (233mm)

#80 #65
1

DRPS02 DRPS03 DRPS04 DRPS05 DRPS06

Supports for HSK straight shank KM or CAPTO 1 Supports for 30V 1 Supports for 40V and 45V (pair) 1 Supports for 50V (pair) Supports to allow for longer retention knob lengths

2" (51mm) 3" (76mm) 4-1/4" (108mm) 5-1/4" (133mm) 6-1/4" (159mm)

Drawer toolholder supports assume that standard retention knobs with extensions of less than 1" (25mm) are used (V-flange tooling only) Height is measured from bottom of drawer to top of toolholder

60

S t a n l e y V i d m a r. c o m

PRECONFIGURED STANDARD CABINETS FOR TOOL STORAGE

The ideal preconfigured tool and die package for a tool room, issue counter, or checking area.

Can be easily expanded or relocated as tool storage needs grow Drawer interiors can be rearranged Entire drawers can be interchanged within housing Unassigned drawers are provided for customer-identified purposes such as fast-issue or specialty items Standard footprint 44" (1118mm) high 30" (726mm) wide 27-3/4" (705mm) deep
USABLE DRAWER HEIGHT DRAWER MODEL # LOADING DIAGRAM

20 20 20 20 20 20 20 20 20 20 20 25

GT28 GT28 X2 X2 VP10 X3 X4 X5 X6 X7 X8 X8

MODEL #

Drills RP2104AL
12 Drawers, 396 Compartments 631 lbs. (286kg) Shipping Weight

25 25 25 20 20 20 20 20 20 20 30

63 63 56 GT28 X16R 55 55 416R 46 X47 56

RP2104AL Jobbers Drills 1-80 and A-Z Spec. Drills 1-80 and A-Z Jobbers Drills to 1/2" (13mm) Spec. Drills to 1/2" (13mm) Misc. Special Drills Drills1/2 to 53/64" (13 to 21mm) Drills27/32 to 1-5/64" (21 to 27mm) Drills13/32 to 1-1/4" (28 to 32mm) Drills1-17/64 to 1-27/64" (32 to 36mm) Drills1-7/16 to 1-35/64" (37 to 39mm) Drills1-9/16 to 1-45/64" (40 to 43mm) Drills1-23/32 to 2" (44 to 51mm)

2-1/4" (57mm) 2-1/4" (57mm) 2-1/4" (57mm) 2-1/4" (57mm) 2-1/4" (57mm) 2-1/4" (57mm) 2-1/4" (57mm) 2-1/4" (57mm) 2-1/4" (57mm) 2-1/4" (57mm) 2-1/4" (57mm) 3" (76mm)

20 20 20 20 20 20 20 20 20 20 20 25

GT28 GT28 X2 X2 VP10 X3 X4 X5 X6 X7 X8 X8

MODEL #

USABLE DRAWER HEIGHT

DRAWER MODEL #

LOADING DIAGRAM

Taps & Cutters RP2105AL

11 Drawers, 448 Compartments 587 lbs. (266kg) Shipping Weight

20 20 20 20 25 30 30 40 40

GT58 GT58 1616 56 56 56 56 1010 1010

RP2105AL Carbide Inserts Carbide Inserts Tool Holders Sm. Reamers, Taps, Mills N.C. and N.F. Taps End Mills End Mills Reamers/Spec. Tools CSink, CBore Tools Slitting Saws User Assigned

3" (76mm) 3" (76mm) 3" (76mm) 2-1/4" (57mm) 2-1/4" (57mm) 2-1/4" (57mm) 2-1/4" (57mm) 2-1/4" (57mm) 2-1/4" (57mm) 2-1/4" (57mm) 3-7/8" (98mm)

25 25 25 20 20 20 20 20 20 20 30

LD63 LD63 LD56 GT28 LDX16R LD55 LD55 LD416R LD46 X47 LD56

MODEL #

USABLE DRAWER HEIGHT

DRAWER MODEL #

LOADING DIAGRAM

Gauges & Misc. Tools RP2106AL

9 Drawers, 222 Compartments 477 lbs. (216kg) Shipping Weight

RP2106AL Plug Gauges Plug Gauges Micrometers User Assigned Files, Knives, Blades Hand Tools Hand Tools Small Power Tools Small Power Tools

2-1/4" (57mm) 2-1/4" (57mm) 2-1/4" (57mm) 2-1/4" (57mm) 3" (76mm) 3-7/8" (98mm) 3-7/8" (98mm) 5-3/8" (137mm) 5-3/8" (137mm)

20 20 20 20 25 30 30 40 40

GT58 GT58 LD1616 LD56 LD56 LD56 LD56 LD1010 LD1010

20 20 20 20 30 30 20 35 50

BN48 BN32 BN16 55 66 66 55 1010 1616

MODEL #

USABLE DRAWER HEIGHT

DRAWER MODEL #

LOADING DIAGRAM

Fasteners & Abrasives RP2107AL

9 Drawers, 231 Compartments 488 lbs. (221kg) Shipping Weight

RP2107AL Fasteners Fasteners Fasteners Fasteners Fasteners User Assigned Mtd. Points and Wheels 7" (178mm) Grinding Wheels 12" (305mm) Grinding Wheels

2-1/4" (57mm) 2-1/4" (57mm) 2-1/4" (57mm) 2-1/4" (57mm) 3-7/8" (98mm) 3-7/8" (98mm) 2-1/4" (57mm) 4-5/8" (117mm)

20 20 20 20 30 30 20 35 50

BN48 BN32 BN16 LD55 LD66 LD66 LD55 LD1010 1616

S t a n l e y V i d m a r. c o m

61