2

CONTENTS

PRECAUTIONS .................................................. 4
PREFACE ............................................................... 6
NAMES AND FUNCTIONS .......................... 6
ASSEMBLY & SETTING............................... 7
OPERATIONS...................................................... 8
1. Simple Weighing Mode ..................................... 8
2. Weighing with Tare ............................................ 9
3. Hold Function ..................................................... 9
4. Setup Mode ....................................................... 10
5. How to use print(Option).................................11
BATTERY MAINTENACE ......................... 16
ERROR MESSAGE......................................... 16
SPECIFICATIONS .......................................... 17

3
PRECAUTIONS

4
PRECAUTIONS

5
PREFACE
Thank you for purchasing CAS PB(Portable Bench).
These series have been designed with CAS reliability, under rigid quality control
and with outstanding performance. Your special departments can enjoy these
high quality reliable CAS products.
We believe that your needs will be satisfied and you will have proper reliability.
This manual will help you with proper operation and care of the PB(Portable Bench).
Please keep it handy for future reference.

NAMES AND FUNCTIONS

OVERALL VIEW

DISPLAY & KEYBOARD

■PB(LCD)

6
■ KEY FUNCTIONS
KEYS FUNCTIONS

Used to set the zero point.

Used to input or cancel the weight of tare.

Used to make the weight of commodity stable.

This weight is average value.

Used to turn on/off the scale or backlight. (If you press the button long
time, Power is turned off)

ASSEMBLY & SETTTING

■ If you unscrew a bolt at Bracket handle(①), you can separate the indicator(②).

■ Please Unscrew a limit bolt(M6 X 10), before Use a scale.

7
OPERATIONS
■Turn on the display by pressing key. Then, the display will show all the segments and
count up "0" to "9". You may stop this automatic counting by pressing the key.
■ When you turn on the display, make sure that platter is empty. Otherwise, display will show
"Err 1", an error of initial zero range. Please refer to "ERROR MESSAGE" section for
more information on page 16
■ When the weight becomes stable the display shows the stable sign ( ○ ) on.
■ You may need to make it "0.00" by pressing key unless the display indicate "0.00"
under the empty platter.

1. Simple Weighing Mode

① Place a commodity on ② Remove the commodity

the platter. from the platter.

8
2. Weighing with Tare
■ TARE means the weight of container being used for a commodity.
■ TARE key function is to subtract the weight of the container from full weight loaded.

① Place a container on ② Press the key. then ③ Place a commodity into

the platter. display will show the "0.00". the container, then the
display will show only the
weight of the commodity.

④ Remove container and ⑤ Press the key, then

commodity, then the display display will show the "0.00".
will show the weight of the
container with "-" symbol.

3. Hold Function
① When the weight is
unstable, press the key.

② "HOLD" will be displayed

twice

③ Then average value will be

show twice And the "HOLD"
function will be removed
automatically

9
4.SETUP MODE

4-1. How to Go to Setup Mode

Make sure that power is OFF. While pressing the ZERO key, press the key. The display shows “U
SEt”. You can select each menu by pressing the ZERO key and change the setting by pressing the
TARE key. If you press ZERO key, you can save current setting and go next mode.

4-2. Set up Mode Table

MENU DISPLAY DESCRIPTIONS
“noSnd” Do not use printer. (No Send Mode)
“K-Snd” Push the key , Print out. (Command Mode)
Printer “S-Snd” Weight is Stable, Print out. (Stable Mode)
“U-Snd” Print out, continuously. (Continue Mode)
“C-Snd” Weight is changed, Print out. (Change Weight Mode)
“ AP oFF ” Do not use Auto Power Off function.
Power turns to be off automatically when the scale is
“ AP 10 ”
not in operation over for 10 minutes.
Auto Power Off Power turns to be off automatically when the scale is
“ AP 30 ”
not in operation over for 30 minutes.
Power turns to be off automatically when the scale is
“ AP 60 ”
not in operation over for 60 minutes.
“ bL on ” Use back-light.
“ bL 10 ” Back-light is on 10 seconds.
Backlight
“ bL 30 ” Back-light is on 30 seconds.
“ bL oFF ” Do not use back-light.

Brightness “ 1 ~7 ” You can set backlight brightness. (Default : 3)

※ Italic Bold : Default Setting

10
5. How to Use Print (Option)
5-1. Mode Change
You can use print out function. Print Out Mode has total 5 stage.
Each Stage is “NOSEND, K-SEND, S-SEND, U-SEND, C-SEND

5-2. K-Send

1)Mode Setting
- This Print Mode is ‘Command Mode’. First of all, You must scale’s mode setting.
Please refer to the page 10.

2)Print Opreation

①Place a commodity on the ② If you press the key, ③Place a another

platter, then the display will You can see the “SUM” commodity on the platter,
show the weight of the message and Current weight
commodity. and then you can send the
weight to the printer.

④ Press the key, You ⑤ Remove container and ⑥Press the key, Total
can send the another weight commodity, then display will weight is send a printer.
to the printer. show the"0.00".

11
3)Print Out

K-send MODE
=>Command Mode

Count Weights/kg
1 25.80
2 19.50
----------------
Sum Total 45.30

5-3. S-Send

1)Mode Setting
- This Print Mode is ‘Stable Mode’. Please refer to the page 10.

2)Print Opreation

①Place a commodity on the ② If weight is stable state, ③ Remove container and

platter, then the display will You will see on display commodity, then You can
show the weight of the and then you listen to the print another commodity
commodity. buzzer sound one time. weight.

3)Print Out

S-SEND MODE

=> Stable Mode

25.80

12
5-4. U-Send

1)Mode Setting
- This Print Mode is ‘Continue Mode’. Please refer to the page 10.

2)Print Opreation

① Place a commodity on the ② Remove container and

platter, then the display will commodity, then display will
show the weight of the show the"0.00".
commodity. The weight is
send to the printer continually.

3)Print Out

U-SEND MODE

=> Continue Mode

25.80
25.80
25.80
25.80
0.00
0.00
0.00
0.00

13
5-5. C-Send
1)Mode Setting
- This Print Mode is ‘Change weight Mode’. Please refer to the page 10.
2)Print Operation

①Place a commodity on the ② Remove container and

platter, then the display will commodity, then display will
show the weight of the show the"0.00". While weight
commodity. is change, The weight is
send to the printer.

3)Print Out
C-SEND MODE
=> Change weight Mode
0.00
7..32
16.25
25.80
19.95
9.92
3.15
0.00

14
5-6. How to Connect RS-232C Wire
- SERIAL INTERFACE(Scale <-> Printer)

- SERIAL INTERFACE(Scale <-> PC)

15
BATTERY MAINTENACE
LOW BATTERY WARNING

When the battery is low the display shows the “ ” sign.

You can replace the battery new one.
If you still use the scale without replacing the battery the scale may provide
incorrect result on measurement.

※ Low Battery Status. ※ Battery cut off display.

ERROR MESSAGE
Error Message
Description Solution
on Display
Remove unstable
"Err 0" The "Err 0" occurs when scale is not stable.
facts.

The "Err 1" occurs when a current zero point has Please call your CAS
"Err 1"
shifted from the last span calibration. dealer.

Please remove the

"Err 3" The "Err 3" is an overload error.
weight.

The "Err 9" is no weight error. When scale is in

counting mode, you must load the weight. Please load the
"Err 9"
If you have no weight on your scale, you can see weight on your tray.
this error message.

16
SPECIFICATIONS
MODEL PB(LCD)
Dual Interval Dual Interval Dual Interval Dual Interval
Capacity / e Max15/30kg Max 30/60kg Max 60/150kg Max 100/200kg
e=5/10g e=10/20g e=20/50g e=50/100g
Internal
1/60000 1/60000 1/60000 1/60000
Resolution
External
1/3000 1/3000 1/3000 1/2000
Resolution
MAX Tare -14.995kg -29.99kg -59.98kg -99.95kg
Display 134 x 48.6[mm]/52.7" x 19.1" 6digit LCD
Symbols STABLE, ZERO, TARE, g, kg, lb, oz, Low Battery
Keys ZERO, TARE, HOLD, POWER
Weighing Hold Function
Backlight ON/OFF(Bright) Control Function
Functions
Auto Power Off Function
Print out Function
Dimensions 355(W) x 611(D) x 65(H)[mm] / 140(W) x 241(D) x 256(H)[inch]
Platter size 355(W) x 443(D)[mm] / 140(W) x 174(D)[inch]
Weight 6.0kg
Power 1.5V x 4 units (C size Battery)
Operation Approx. 140hours (Manganese battery)/
Time 300hours (Alkaline at 20°C /68°F)
Operating
-10°C ~ +40°C / 14°F ~ 104°F
Temperature
Minimum
Voltage
About 4.2V(Recharge Battery: 5.6V)
Level of The
Battery
12V Adaptor 1.5A
RS-232C(RJ-11 TO D-SUB) Wire (Add Serial Interface)
Option
DEP-50 Printer (Add Serial Interface)
Recharge battery(Pb:6V, 1.3Ah, 20HR) (Add Recharge Interface)

※ Notice: Specifications are subject to change for improvement without notice.

17
MEMO

18
19
20