Msds Yellow Md
Msds Yellow Md
This product does not contain any substances classified as PBT or vPvB
3.1 Substance :
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment and hence require reporting
in this section.
3.2 Mixture
Not applicable.
If it is given check the hazard statement in 2.2 and proceed with this information.
4.3 Indication about Emergency medical attention and the effect requiring treatment
Treat Symptomatically. Call medical doctor or poison control centre immediately if large quantity is
Ingested.
Additional Information: Ventilation – Maintain an open airway.
6.2 Environmental precautions: Avoid release to the environment. Avoid material entering water ways, sewers
Sweep up or shovel spills using a moist absorbent to prevent dusting and Collect into a waste disposal
container in a most effective way. Incineration, disposal, according local regulations. Burning or disposal in
accordance with local regulations for chemical waste. Special protective equipment for emergency
personnel: Self-contained breathing apparatus.
According to good industrial practice handle with due care. When using, do not eat, drink or smoke.
Do not breathe dust. Keep container tightly closed and dry. Avoid contact with skin and eyes.
Remove contaminated clothing and protective equipments before entering eating area Avoid release to the
Environment.
Appropriate Engineering control: If user operation generate dust, gas, fumes, vapors or mist, use process
enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to
airborne contaminant below any recommended or statutory limits.
Respiratory : Do not breathe dust. Use coveralls of close weave fabric mask.
Hand Protection: Wear Rubber Gloves
Eye Protection : Protective Safety Goggles. Ensure eye wash stations and safety showers
are close to the workstation location.
Body Protections: Use Protective Suit. Take off immediately contaminated clothing.
Wash hands, forearms and face thoroughly after handling.
10.1 Reactivity : This product is stable under normal storage conditions and no Hazardous reactions will occur
10.2 Chemical Stability : stable Under normal temperature & pressure.
10.3 Possibility of hazardous reaction : None
10.4 Conditions to avoid : High temperature, strong alkali. Thermal Decomposition > 200oC
10.5 Incompatible Materials : Oxidizing and Reducing agents.
10.6 Hazardous Decomposition Products : None under normal condition.
12.1 Toxicity :
COD : <570 mg/g BOD5 : >51 mg/g TOC :< 214 mg/g
13.1 Waste treatment methods : Disposal of this product, solutions and any by-products should at all times
comply with the requirements of environmental protection and waste disposal legislation and any regional
local authority requirement. Disposal of surplus and non recyclable products via a licensed waste disposal
contractor. Waste should not be disposed off untreated to the sewers unless fully compliant with the
requirements of all local authorities. Completely empty contents of drums before discarding.
Disposal methods of the contaminated packaging: Contaminated empty containers must be Disposed-off as
chemical waste.
14.1 UN Number : The above values are taken in to account in respect of the relevant legislation
14.2 UN Full shipping Name : The above values are taken in to account in respect of the relevant legislation
14.3 Dangerous shipping class : The above values are taken in to account in respect of the relevant legislation
14.4 Packing group : The above values are taken in to account in respect of the relevant legislation
14.5 Environment hazards: The above values are taken in to account in respect of the relevant legislation
14.6 Special precautions for the user : Keep away from food items.
14.7 Transport in bulk according to Annex II of Morpol and IBC Code: This product or mixture has no
bulk transport in accordance with Annex 2 and container coding in accordance with MARPOL 73/78.
15.1 Safety,Health and environmental regulations/legislation specific for the substance or mixture
The product is not subject to identification regulations under EU Directives and the Ordinance on
Hazardous Materials.
The information certain here is based on the present state of our knowledge. Recipients of our product must
Take responsibility for observing existing laws and regulations. The purpose of this safety data sheet is to
Describe the products in terms of their safety requirements. The data does not signify any guarantee with
regards to the products properties.
Note : HMIS® rating involves data interpretations that may vary from company to company.
They are intended only for rapid, general identification of the magnitude of the specific hazard.
To deal adequately with the safe handling of this material, all the information contain in this MSDS must be
Considered.
Meghmani Dyes and Intermediates is member of the Ecological and Toxicological Association of Dyestuffs
manufacturing industries.(ETAD)