Scribd
Upload
24 views1 page

Fuse Monitoring and Automatic Changeover Systems

The Fuse Auto Changeover System is designed for continuous monitoring and automatic changeover of fuses in Railway signaling installations, providing audio/visual indications for failures. It can monitor 32 fuses across various voltages and operates with low current drain, ensuring quick changeover to spare fuses. The system includes optional remote indication accessories and is compliant with IEC-127 standards.

Uploaded by

venkatesh05051998
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
24 views1 page

Fuse Monitoring and Automatic Changeover Systems

The Fuse Auto Changeover System is designed for continuous monitoring and automatic changeover of fuses in Railway signaling installations, providing audio/visual indications for failures. It can monitor 32 fuses across various voltages and operates with low current drain, ensuring quick changeover to spare fuses. The system includes optional remote indication accessories and is compliant with IEC-127 standards.

Uploaded by

venkatesh05051998
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

TM

FUSE AUTO CHANGEOVER SYSTEM

Scope:

Fuse Auto Changeover System is designed for continuous


monitoring of various fuses provided in Railway signaling
installations. In addition to monitor the fuses, the system
also provide automatic changeover of circuit to spare fuse
in the event of Main fuse failure.
While monitoring and changing over to spare fuse, the
system also provide audio/visual indications for failure of
the fuse. The system is also provided with potential free
contacts for taking remote indication.
RDSO Specification No.
RDSO/SPN/209/2012 Rev 1.0

Features: Components

• 19" Rack mounting with less than 4U height. (Additional Front Panel Components on Front Panel Components on
brackets are supplied for Relay Rack mounting.) Power card Each Sensing Modules
• System is designed to monitor 32 fuses of 0.6A to 4A of • ON/OFF Switch • 4 Spare fuses
any voltage (12V,24V,60V,110V AC/DC) of G type or • Power ON indication • Reset push button
any other type.
• Input Power fuse • Red & Green LEDs for
• System operates with N+2 wires
• Test Push Button indicating status of MAIN &
• Continuously monitors the status of both Main and SPARE fuses
• Buzzer Reset Push Button
Spare fuse
• Common Fuse Fail All terminations are provided
• Automatically changeover to a Spare Fuse on failure of
Indication (Flashing) on rear side.
the Main Fuse in less than 20 mS
• Current drain from the main system is very low
• Provides audio/visual alarm on failure of any fuse Accessories
• Push button to test whether all indications are working Optional accessories for Remote Indications-
• The audio alarm is resettable by push button 1. Audio/Visual Alarm Unit
• Operating Voltage: 110V AC (Optionally 60V, 24V DC) 2. GSM Based SMS Unit
• System compromise of 8 modules for monitoring 4 fuses The Customer Should Specify-
each & one power card
1. Voltage Rating of fuses
• Fuses confirming IEC-127
2. Current Rating of fuses
ISO Certified

3. Operating voltage of the system

GENERAL AUTO ELECTRIC CORPORATION


D/207, Ansa Industrial Estate, Saki Vihar Road, Saki Naka, Andheri (East),Mumbai 400072, INDIA.
T: [+9122] 6692 3194-95 | F: [+9122] 6692 3196 | [email protected] | www.gaec.in

*Due to continuous improvement of products, Designs & Specifications are subject to change.

You might also like