SESSION PLAN

Sector : Electrical and Electronics

Qualification : Electronic Product Assembly and Servicing NC II
Competency : Assemble Electronic Products
Module Title : Assembling Electronic Products
This unit covers the knowledge, skills and attitudes required to assemble electronic products and systems for consumer/ industrial
uses/applications. It consist of competencies in identifying and preparing electronic components and circuits, preparing/making
printed circuit board (PCB) modules, mounting and soldering of components, assembling electronic products and performing
mechanical and electrical/electronic tests.
LEARNING OUTCOMES
LO1. Prepare to assemble electronic products
LO2. Prepare/Make PCB modules
LO3. Mount and solder electronic components
LO4. Perform electronic products assembly
LO5. Test and inspect assembled electronic products

LO 1. Prepare to assemble electronic products

Learning Activity

Learning
Methods Presentation Practice Feedback Resources Time
Content
PPT presentation
Trainer will lecture on various Tools,
Tools, Materials
using power point Materials and
and Equipment Trainees will listen to Recitation (trainer
presentation on Equipment
Used to Assemble Lecture trainer’s presentation will ask questions
various Tools,
Electronic and asks questions to trainees) Laptop, DLP/LCD
Materials and
Products projector/ smart
Equipment
TV

Trainer will provide Information Sheet

Self-Learning/ Trainees/ Trainer
Information Sheet 1.1-1
Individualized Trainees will answer will compare
Study/Assigne 1.1-1 “Tools, Self-Check 1.1-1 answers with Self-Check 1.1-1
d Reading Materials and Answer key 1.1-1
Equipment” for Answer key 1.1-1

Date Developed: July 11, 2022 Document No.

Electronic Product Assembly Issued by:
Date Revised:
and Servicing NC II
Developed by:
Juvelyn R. Camacho
Revision # 01
 trainees to read and
study

LO 2. Prepare/Make PCB modules

PPT presentation
Trainer will lecture Trainer will ask on the procedures
using power point trainees questions in preparing /
Procedures in Trainees will listen to
Lecture/Demo presentation on on the procedures making PCB
preparing / trainer’s presentation
nstration procedures in in modules
making PCB and asks questions
modules Preparing/Making preparing/making Laptop, DLP/LCD
PCB Modules PCB modules projector/ smart
TV
Trainee/Trainer PCB, pencil,
Trainer will provide will validate masking tape,
Trainees will make
trainees Task Sheet performance ruler, plastic
Return PCB modules
1.2-1 “Procedures following basin, ferric
Demonstration following Task Sheet
Preparing / Making Performance chloride, bond
1.2-1
PCB modules” Criteria Checklist paper, blade
1.2-1 cutter,

LO3. Mount and solder Electronic Components

PPT presentation
on the procedures
Trainer will lecture Trainer will ask in on soldering
Trainees will listen to
Soldering using power point trainees questions techniques
Lecture trainer’s presentation
Techniques presentation on on soldering
and asks questions Laptop, DLP/LCD
soldering techniques techniques
projector/ smart
TV
Trainees will watch Laptop/desktop Laptop/desktop
On line Trainer will instruct
on line accessing with internet with internet
viewing trainees to watch on
the proper mounting connection connection

Date Developed: July 11, 2022 Document No.

Electronic Product Assembly Issued by:
Date Revised:
and Servicing NC II
Developed by:
Juvelyn R. Camacho
Revision # 01
 of electronic https://youtu.be/N_
components dvf45hN6Y
https://youtu.be/Aq
vHogekDI4

LO4. Perform Electronic Products Assembly

PPT presentation
on the procedures
in on assembling
Trainer will lecture of power supply
Trainer will ask
Assembling of using power point Trainees will listen to
trainees questions Laptop, DLP/LCD
power supply Lecture/demo presentation on trainer’s presentation
on assembling of projector/ smart
module assembling of power and asks questions
power supply TV
supply
PPE, PCB,
Soldering wire,
AC-DC Supply kit
Trainee/Trainer
Trainer will provide will validate
Trainees will
trainees Task Sheet performance PPE, PCB,
Return assemble power
1.2-3 “Procedures following Soldering wire,
Demonstration supply following Job
Assembling power Performance AC-DC Supply kit
Sheet 1.4-1
supply” Criteria Checklist
1.4-1

LO5. Test and inspect assembled electronic products

Trainer will lecture

Trainer will ask PPT presentation
using power point Trainees will listen to
Power supply trainees questions on the procedures
Lecture/demo presentation on trainer’s presentation
testing procedure on assembling of in assembling of
Power supply testing and asks questions
power supply power supply
procedure

Date Developed: July 11, 2022 Document No.

Electronic Product Assembly Issued by:
Date Revised:
and Servicing NC II
Developed by:
Juvelyn R. Camacho
Revision # 01
 Laptop, DLP/LCD
projector/ smart
TV

PPE, AC-DC
Supply kit
Trainee/Trainer
Trainer will provide will validate
Trainees will
trainees Task Sheet performance PPE, PCB,
Return assemble power
1.2-3 “Procedures following Soldering wire,
Demonstration supply following Job
Assembling power Performance AC-DC Supply kit
Sheet 1.4-1
supply” Criteria Checklist
1.4-1

Date Developed: July 11, 2022 Document No.

Electronic Product Assembly Issued by:
Date Revised:
and Servicing NC II
Developed by:
Juvelyn R. Camacho
Revision # 01
 SESSION PLAN

Sector : Electrical and Electronics

Qualification : Electronic Product Assembly and Servicing NC II
Competency : Service Consumer Electronic Products
Module Title : Servicing Consumer Electronic Products

This unit covers the knowledge, skills and attitudes required to install and service consumer electronic products and systems. It
includes competencies in installing, maintenance and repairing audio-video products/systems and domestic electronic appliances
and home security system

LEARNING OUTCOMES
LO1. Prepare unit, tools and workplace for installation and service
LO2. Install consumer electronic products and systems
LO3. Diagnose faults and defects of consumer electronic products and systems
LO4. Maintain/Repair consumer electronic products
LO5. Re-assemble and test repaired consumer electronic product

LO 1. Assess quality of received materials or components

Learning Activity

Learning
Methods Presentation Practice Feedback Resources Time
Content
PPT presentation
Trainer will lecture on various Tools,
Tools, Materials
using power point Materials and
and Equipment Trainees will listen to Recitation (trainer
presentation on Equipment
Used to Assemble Lecture trainer’s presentation will ask questions
various Tools,
Electronic and asks questions to trainees) Laptop, DLP/LCD
Materials and
Products projector/ smart
Equipment
TV
Trainer will provide Trainees will answer Information Sheet
Self-Learning/ Trainees/ Trainer
Information Sheet Self-Check 1.1-1 1.1-1
Individualized will compare
1.1-1 “Tools,
Date Developed: July 11, 2022 Document No.
Electronic Product Assembly Issued by:
Date Revised:
and Servicing NC II
Developed by:
Annelyn M. Gaspili
Revision # 01
 Study/Assigne Materials and answers with Self-Check 1.1-1
d Reading Equipment” for Answer key 1.1-1
Answer key 1.1-1
trainees to read and
study

LO 2. Prepare/Make PCB modules

PPT presentation
Trainer will lecture Trainer will ask on the procedures
using power point trainees questions in preparing /
Procedures in Trainees will listen to
Lecture/Demo presentation on on the procedures making PCB
preparing / trainer’s presentation
nstration procedures in in modules
making PCB and asks questions
modules Preparing/Making preparing/making Laptop, DLP/LCD
PCB Modules PCB modules projector/ smart
TV
Trainee/Trainer PCB, pencil,
Trainer will provide will validate masking tape,
trainees Task Sheet Trainees will lay out performance ruler, plastic
Return
1.2-1 “Procedures work piece following following basin, ferric
Demonstration
Preparing / Making Task Sheet 1.2-1 Performance chloride, bond
PCB modules” Criteria Checklist paper, blade
1.2-1 cutter,

LO3. Mount and solder Electronic Components

PPT presentation
on the procedures
Trainer will lecture Trainer will ask in on soldering
Trainees will listen to
Soldering using power point trainees questions techniques
Lecture trainer’s presentation
Techniques presentation on on soldering
and asks questions Laptop, DLP/LCD
soldering techniques techniques
projector/ smart
TV

Date Developed: July 11, 2022 Document No.

Electronic Product Assembly Issued by:
Date Revised:
and Servicing NC II
Developed by:
Annelyn M. Gaspili
Revision # 01
 Trainees will watch
on line accessing

https://ph.video.sear
ch.yahoo.com/search
/video;_ylt=AwrxzBX
Trainer will instruct
S6ftiuQkAJQOzRwx.;
trainees to watch on Laptop/desktop Laptop/desktop
On line _ylu=Y29sbwNzZzME
the proper mounting with internet with internet
viewing cG9zAzEEdnRpZAME
of electronic connection connection
c2VjA3BpdnM-
components
?p=through+hole+tec
hnique&fr2=piv-
web&type=E211PH7
14G0&fr=mcafee#id=
5&vid=ff3aaa31753d
7c89bae6d72222613
c83&action=view

LO4. Perform Electronic Products Assembly

Date Developed: July 11, 2022 Document No.

Electronic Product Assembly Issued by:
Date Revised:
and Servicing NC II
Developed by:
Annelyn M. Gaspili
Revision # 01
https://ph.video.search.yahoo.com/search/video;_ylt=Awrx1BRl1ftiP3EARRuzRwx.;_ylu=Y29sbwNzZzMEcG9zAzEEdnRpZAMEc2VjA
3BpdnM-?p=mount+and+solder+electronic+components&fr2=piv-
web&type=E211PH714G0&fr=mcafee#id=25&vid=bded490c3b56450022acf8013e849542&action=view

https://ph.video.search.yahoo.com/search/video;_ylt=Awrx1BRl1ftiP3EARRuzRwx.;_ylu=Y29sbwNzZzMEcG9zAzEEdnRpZAMEc2VjA
3BpdnM-?p=mount+and+solder+electronic+components&fr2=piv-
web&type=E211PH714G0&fr=mcafee#id=7&vid=1787249bb4ead4658d948daed317511d&action=view

https://ph.video.search.yahoo.com/search/video;_ylt=AwrxywJc2fti.HUAhDCzRwx.;_ylu=Y29sbwNzZzMEcG9zAzEEdnRpZAMEc2VjA
3BpdnM-?p=splicing+wires&fr2=piv-
web&type=E211PH714G0&fr=mcafee#id=1&vid=6ab32474e8864ddfb506d7bdbe410ccd&action=view

https://ph.video.search.yahoo.com/search/video?fr=mcafee&ei=UTF-
8&p=electrical+wire+splicing+techniques&type=E211PH714G0#id=5&vid=1109bb96aae02cb4512203bf24327d9e&action=click

Date Developed: July 11, 2022 Document No.

Electronic Product Assembly Issued by:
Date Revised:
and Servicing NC II
Developed by:
Annelyn M. Gaspili
Revision # 01
 SESSION PLAN

Sector : Electrical and Electronics

Qualification : Electronic Product Assembly and Servicing NC II
Competency : Service Industrial Electronic Modules, Products and Systems
Module Title : Servicing Industrial Electronic Modules, Products and Systems
This unit covers the knowledge, skills and attitudes required to install and service consumer electronic products and systems. It
includes competencies in installing, maintenance and repairing audio-video products/systems and domestic electronic appliances
and home security system
LEARNING OUTCOMES
LO1. Prepare unit, tools and workplace for installation and service
LO2. Install industrial electronic modules/products/systems
LO3. Diagnose faults and defects of industrial electronic modules/systems/products
LO4. Maintain/Repair industrial electronic products
LO5. Re-assemble and test repaired industrial electronics products
LO1. Prepare unit, tools and workplace for installation and service
Learning Activity

Learning
Methods Presentation Practice Feedback Resources Time
Content
PPT presentation
Tools, Materials Trainer will lecture on various Tools,
and Equipment using power point Materials and
Trainees will listen to Recitation (trainer
Used to Assemble presentation on Equipment
Lecture trainer’s presentation will ask questions
Industrial various Tools,
and asks questions to trainees) Laptop, DLP/LCD
Electronic Materials and
Module and Equipment projector/ smart
TV

Trainer will provide Information Sheet

Self-Learning/ Trainees/ Trainer
Information Sheet 1.1-1
Individualized Trainees will answer will compare
Study/Assigne 1.1-1 “Tools, Self-Check 1.1-1 answers with Self-Check 1.1-1
d Reading Materials and Answer key 1.1-1
Equipment” for Answer key 1.1-1

Date Developed: July 11, 2022 Document No.

Electronic Product Assembly Issued by:
Date Revised:
and Servicing NC II
Developed by:
Annelyn M. Gaspili
Revision # 01
 trainees to read and
study

LO 2. Install industrial electronic modules/products/systems

PPT presentation
Trainer will lecture Trainer will ask on the procedures
using power point trainees questions in Installing
Procedures in
presentation on Trainees will listen to on the procedures Industrial
Installing Lecture/Demo
procedures in trainer’s presentation in Installing Electronic
Industrial nstration
Installing Industrial and asks questions Industrial Modules
Electronic
Modules Electronic Electronic Laptop, DLP/LCD
Modules Modules projector/ smart
TV
Trainee/Trainer Digital Video
Trainer will provide will validate Recorder (DVR),
trainees Task Sheet Trainees will lay out performance CCTV camera,
Return
1.2-1 “in Installing work piece following following VGA Cable, HDMI
Demonstration
Industrial Electronic Task Sheet 1.2-1 Performance cable, mouse,
Modules” Criteria Checklist monitor, RCA
1.2-1 cable

Video on cctv
installation
https://www.youtub
e.com/watch?v=Kgai
wjyiyrQ

https://www.youtub
e.com/watch?v=ZS9d
gZyJBmg

Date Developed: July 11, 2022 Document No.

Electronic Product Assembly Issued by:
Date Revised:
and Servicing NC II
Developed by:
Annelyn M. Gaspili
Revision # 01
LO3. Diagnose faults and defects of industrial electronic modules/systems/products

LO4. Maintain/Repair industrial electronic products

Maintenance of
Industrial
Electronic
Modules

LO5. Re-assemble and test repaired industrial electronics products

Date Developed: July 11, 2022 Document No.

Electronic Product Assembly Issued by:
Date Revised:
and Servicing NC II
Developed by:
Annelyn M. Gaspili
Revision # 01
https://ph.video.search.yahoo.com/search/video;_ylt=Awrx1BRl1ftiP3EARRuzRwx.;_ylu=Y29sbwNzZzMEcG9zAzEEdnRpZAMEc2VjA
3BpdnM-?p=mount+and+solder+electronic+components&fr2=piv-
web&type=E211PH714G0&fr=mcafee#id=25&vid=bded490c3b56450022acf8013e849542&action=view

https://ph.video.search.yahoo.com/search/video;_ylt=Awrx1BRl1ftiP3EARRuzRwx.;_ylu=Y29sbwNzZzMEcG9zAzEEdnRpZAMEc2VjA
3BpdnM-?p=mount+and+solder+electronic+components&fr2=piv-
web&type=E211PH714G0&fr=mcafee#id=7&vid=1787249bb4ead4658d948daed317511d&action=view

https://ph.video.search.yahoo.com/search/video;_ylt=AwrxywJc2fti.HUAhDCzRwx.;_ylu=Y29sbwNzZzMEcG9zAzEEdnRpZAMEc2VjA
3BpdnM-?p=splicing+wires&fr2=piv-
web&type=E211PH714G0&fr=mcafee#id=1&vid=6ab32474e8864ddfb506d7bdbe410ccd&action=view

https://ph.video.search.yahoo.com/search/video?fr=mcafee&ei=UTF-
8&p=electrical+wire+splicing+techniques&type=E211PH714G0#id=5&vid=1109bb96aae02cb4512203bf24327d9e&action=click

Date Developed: July 11, 2022 Document No.

Electronic Product Assembly Issued by:
Date Revised:
and Servicing NC II
Developed by:
Annelyn M. Gaspili
Revision # 01