Data sheet 3UF7104-1BA00-0

Current measuring module, Set current 63...630 A Overall width 145 mm, busbar
connection

product brand name SIRIUS

product designation Current measuring module
General technical data
size of the circuit-breaker S10, S12
product function
● current measurement Yes
● voltage measurement No
● active power measurement No
● energy measurement No
● frequency measurement No
product component
● input for thermistor connection No
consumed active power 0.2 W
insulation voltage
● with degree of pollution 3 at AC rated value 690 V
● for wires of main circuit according to IEC 60947-1 rated 8 kV
value
surge voltage resistance rated value 8 000 V
shock resistance according to IEC 60068-2-27 15g / 11 ms
vibration resistance 1-6 Hz / 15 mm; 6-500 Hz / 2 g
reference code according to IEC 81346-2 F
Substance Prohibitance (Date) 07/01/2006
SVHC substance name Lead monoxide (lead oxide) - 1317-36-8
Weight 1.787 kg
Electromagnetic compatibility
EMC emitted interference according to IEC 60947-1 class A
EMC immunity according to IEC 60947-1 corresponds to degree of severity 3
conducted interference
● due to burst according to IEC 61000-4-4 2 kV
● due to conductor-earth surge according to IEC 61000-4-5 2 kV
● due to conductor-conductor surge according to IEC 1 kV
61000-4-5
field-based interference according to IEC 61000-4-3 10 V/m
Inputs/ Outputs
number of outputs as contact-affected switching element 0
Protective and monitoring functions
product function
● power factor monitoring No
● ground-fault monitoring No
● voltage detection No
trip class CLASS 5E

3UF71041BA000 Subject to change without notice

6/11/2025
Page 1/5 © Copyright Siemens
 product function
● current detection Yes
● overload protection Yes
Installation/ mounting/ dimensions
mounting position any
fastening method direct mounting / stand-alone installation
height 147 mm
width 145 mm
depth 148 mm
required spacing
● top 30 mm
● bottom 30 mm
● left 0 mm
● right 0 mm
Connections/ Terminals
type of electrical connection
● for main current circuit busbar connection
type of connectable conductor cross-sections at the
measurement inputs for current
● solid with core end processing 50 mm² ... 240 mm²
● stranded with core end processing 70 mm² ... 240 mm²
● for AWG cables 1/0 kcmil ... 500 kcmil
design of the thread of the connection screw at the M8 x 25
measurement inputs for current
Ambient conditions
installation altitude at height above sea level
● 1 maximum 2 000 m
● 2 maximum 3 000 m; max. +50 °C (no protective separation)
● 3 maximum 4 000 m; max. +40 °C (no protective separation)
ambient temperature
● during operation -25 ... +60 °C
● during storage -40 ... +80 °C
● during transport -40 ... +80 °C
environmental category
● during operation according to IEC 60721 3K6 (no formation of ice, no condensation, relative humidity 10 ... 95%), 3C3
(no salt mist), 3S2 (sand must not get into the devices), 3M6
● during storage according to IEC 60721 1K6 (no condensation, relative humidity 10 ... 95%), 1C2 (no salt mist), 1S2
(sand must not get into the devices), 1M4
● during transport according to IEC 60721 2K2, 2C1, 2S1, 2M2
relative humidity during operation 5 ... 95 %
Short-circuit protection
product function short circuit protection No
ATEX
certificate of suitability
● according to ATEX directive 2014/34/EU BVS 06 ATEX F001
● according to UKCA ITS21UKEX0464
explosion device group and category according to ATEX II (2) G, II (2 ) D, I (M2)
directive 2014/34/EU
Galvanic isolation
(electrically) protective separation according to IEC 60947-1 All circuits with protective separation (double creepage paths and clearances),
the information in the "Protective Separation" test report, No. A0258, must be
observed (link see further information)
Main circuit
number of poles for main current circuit 3
adjustable current response value current of the current- 63 ... 630 A
dependent overload release
operating voltage
● at AC
— at 50 Hz rated value 110 ... 690 V
— at 60 Hz rated value 110 ... 690 V
operating frequency rated value 50 ... 60 Hz
Control circuit/ Control
type of voltage AC

3UF71041BA000 Subject to change without notice

6/11/2025
Page 2/5 © Copyright Siemens
Approvals Certificates
General Product Approval EMV

EMV For use in hazardous locations Test Certificates

KC Miscellaneous Special Test Certific- Type Test Certific-

ate ates/Test Report

Maritime application other Environment

Confirmation

Environment Industrial Communication

Environmental Con-
firmations

Further information
Information on the packaging
https://support.industry.siemens.com/cs/ww/en/view/109813875
Information- and Downloadcenter (Catalogs, Brochures,…)
https://www.siemens.com/ic10
Industry Mall (Online ordering system)
https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3UF7104-1BA00-0
Cax online generator
http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3UF7104-1BA00-0
Service&Support (Manuals, Certificates, Characteristics, FAQs,...)
https://support.industry.siemens.com/cs/ww/en/ps/3UF7104-1BA00-0
Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...)
http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3UF7104-1BA00-0&lang=en

3UF71041BA000 Subject to change without notice

6/11/2025
Page 3/5 © Copyright Siemens
 L1

L2

L3

-B

Sys
Logic

SIMOCODE PRO
T1

T2

T3

last modified: 4/2/2025

3UF71041BA000 Subject to change without notice

6/11/2025
Page 4/5 © Copyright Siemens
3UF71041BA000 Subject to change without notice
6/11/2025
Page 5/5 © Copyright Siemens