QUALITY EVALUATION REPORT

EVALUATION DATE :18-06-2025 VENDOR:-AARYAN INT. COLOUR :

CATEGORY : WW PH :DL11 S CODE : S-25659 Proto S.Set Pre P
DESCRIPTION: WB #PANT SLIM FIT LINEN COTTON PLN FRNT FLY
W/ZIPPER FRNT/BCK POCKET BELT-LOOP DTL W/LINING T.ID:AMJ24/24387
(AMJ24/24387)
GPT REPORT STATUS : Category to confirm
Measurement comments :
1) MEASUREMENT FOUND OUT OF TOLERANCE ARE HIGHLIGHTED IN SPEC SHEET. PP SAMPLE APPROVED CONDITIONALLY

Construction comments :
1) SPI SHOULD BE 12 TO 14 FOR ALL SEAMS AND STITCHES.PLEASE MAKE SURE IT SHOULD BE MAINTAINED IN BULK.

Pattern comments:

Trim comments:
1- TAKE ALL TRIMS APPROVAL ON TRIM CARD PRIOR TO ATTACH ON BULK.

Major Quality comments:

1) ZIPPER COLOR AND BUTTON COLOR NOT MACHING WITH PP SAMPLE.
2) WAIST BAND FINISHING WORKMAN SHIP IS POOR.
3) UNEVEN WAISTBAND WIDTH. FOLLOW FABINDIA PATTERN.
4) FOUND PUCKERING AROUND AT WAISTBAND, BACK YOKE AND ALL OVER SEAMS
5)BACK POCKET SHAPE IS UNEVEN .FOLLOW FABINDIA PATTERN.
6)UNEVEN BOTTOM HEM TURN FOLD (LINING)

Additional comments:
* RECEIVED DIRECT PP OF THIS STYLE.
* TBC MEANS : TO BE CHECK/CONFRIM

Category comments:
* PP SAMPLE OK FOR LOOK.

CLOSED
APPROVED WITH COMMENTS → REJECTED → 18-06-2025
DATE →
 MEASUREMENT EVALUATION REPORT
EVALUATION DATE :18-06-2025 VENDOR:-AARYAN INT. COLOUR :
CATEGORY : WW PH :DL11 S CODE : S-25659 Proto S.Set Pre P
DESCRIPTION: WB #PANT SLIM FIT LINEN COTTON PLN FRNT FLY W/ZIPPER
T.ID:AMJ24/24387
FRNT/BCK POCKET BELT-LOOP DTL W/LINING (AMJ24/24387)

POINTS OF MEASUREMENTS 30 COMMENTS 34 COMMENTS tol -

A outseam length from waist top edge 37 OK 37.5 1/4 1/4"
Inseam length 26 3/8 5/8 26 1/8 OK 1/4"
B waist round (measure along curve at top waist edge ) 32 OK 36 OK 1/2"
waist band width 1 1/2 OK 1 1/2 OK 1/8"
front rise (with waistband) 10 1/2 1/2 11 1/2 1/4 1/4"
back rise (with waistband) 14 1/2 1/2 15 3/4 1/4 1/4"
fly length total from waist top edge 6 1/2 OK 6 1/2 1/4 1/8"
fly open length (measure from waist top edge) 6 - 1/4 6 3/8 1/4
fly width total (edge to topstitch) 1 1/4 OK 1 1/4 OK 1/8"
fly backing patti width 1 3/8 OK 1 3/8 OK 1/8"
fly inside extension patti width at waist band seam (edge to OK OK
3 3 1/8"
edge)
fly inside extension patti width at patti hem (edge to edge) 1 5/8 OK 1 5/8 OK 1/8"
C hip round (measure curved 8'' below waist edge) 41 OK 45 OK 1/2"
D thigh round (measure straight across 1'' below crotch) 25 3/4 27 1/2 1/4"
E bottom round circumference 13 1/2 14 - 1/4 1/4"
bottom hem slit open length 1 3/4 OK 1 3/4 OK 1/8"
bottom hem fold height 1 OK 1 OK 1/8"
hanger loop length X width 5 X 1/4 OK 5 X 1/4 OK 1/8" X 0
LINING TO BE 1" SHORTER THEN SHELL OK
FRONT/BACK POCKETS
Front pocket open length (measure from waistband seam to OK OK
2 1/2 2 1/2 1/4
edge of pocket along side seam)
Front pocket open width (measure from side seam to edge of OK OK
4 1/4 4 1/4 1/2
pocket along waistband seam)
pocket bag length from waist band seam 9 1/2 OK 9 1/2 OK 1/4
pocket bag width at waist band seam 6 1/2 1/4 6 1/2 OK 1/4
back pocket length (measure at the center) 5 OK 5 OK 1/8"
back pocket width at top edge 4 3/4 OK 4 3/4 - 1/8 1/8"
back pocket width at bottom edge ot edge 4 1/4 OK 4 1/4 OK 1/8"
back pocket position from waist band seam 3 1/2 1/4 3 1/2 1/2 1/8"
BACK YOKE
back yoke length at c.back (measure from waist band seam) 3 1/4 3 1/4 1/8"

back yoke length at out seam (measure from waist band seam) 1 1/2 OK 1 1/2 1/4 1/8"
BELT LOOP
no. of belt loop at waist band 5 OK 5 OK 0
belt loop length X width 2 X 5/16 1/4 X OK 2 X 5/16 1/4 X OK 1/8"
FRONT: Belt loops to be positioned just before front pocket open along waist band seam.
BELT LOOP POSITIONING: BACK: 1 loop to come at CB and the remaining two loops to be positioned 1.75" away from side seam 1/8"
along waist band top edge
 TECH EVALUATION REPORT
EVALUATION DATE :18-06-2025 VENDOR:-AARYAN INT. COLOUR :
CATEGORY : WW PH :DL11 S CODE : S-25659 Proto S.Set Pre P
DESCRIPTION: WB #PANT SLIM FIT LINEN COTTON PLN FRNT FLY
W/ZIPPER FRNT/BCK POCKET BELT-LOOP DTL W/LINING T.ID:AMJ24/24387
(AMJ24/24387)

FABRIC: COMMENTS
1 SHELL LINEN COTTON PLAIN OK
2 LINING COTTON MULL OK
CONSTRUCTION:
SL. NO. COMPONENTS
french seam. Doubel NDL top Stitch detail of 1/4" gauge, 9" long below waist band seam SHELL & LINING
1 OUTSEAM
STITCH TOGETHER OK

SNLS with 5 thread overlock both seams allowance together with doubel NDL top Stitch detail of 1/4" gauge,
2 INSEAM
SHELL & LINING STITCH TOGETHER
OK

3 FRONT RISE french seam with double NDL top stitch of 1/4" gauge SHELL & LINING STITCH TOGETHER OK
4 BACK RISE french seam with double NDL top stitch of 1/4" gauge SHELL & LINING STITCH TOGETHER OK
5 WAIST clean finish with 1.5" double layer shape waist band with 1/16" top edge stitch OK
6 BACK YOKE french seam with double NDL top stitch of 1/4" gauge OK
7 BOTTOM HEM SIDE SLIT turn and fold with top stitch 1/4" away from edge OK
8 BOTTOM HEM SHELL turn and fold with top stitch 1" away from edge OK
9 BOTTOM HEM LINING turn and fold with top stitch 0.75" away from edge OK /1/4
10 POCKET OPENING EDGE Clean finish with pocket pouch and additional double NDL topstitch of 1/4" gauge OK
11 POCKET POUCH HEM bag out clean finish with 2 additional topstitches- one on the edge and the other 1/4" from edge topstitch. OK
ADDTL CONSTRUCTION COMMENTS

Bar tacking/reinforcement stitch required at 3 places for fly

1 OK
construction as shown here ---->

2 Pant crease line Traveler's crease (fold runs vertically down the centre of front and back of the pant legs) TBC BY QC
TRIM DETAILS

YKK Coil Zipper. (CODE: CFC-39 DS C5 P12 KENSIN N-ANTI P-TB).

1 ZIPPER ZIPPER TAPE COLOUR TO BE DTM. Silver puller for light colour way and TBC BY QC
antique pullar for dark colour way. Quilty as approved by Fabindia QC

2 PANT BUTTON (OUTSIDE) 26L (16.0 mm) four hole fabindia engraved plastic buttons (Supplier: Baba Creations) TBC BY QC

3 PANT BUTTON (INSIDE) 24L (15.0 mm) Four hole transparent plastic button (Supplier: Baba Creations) TBC BY QC

BUTTON ATTACHMENT COMMENTS

1 Four hole - Cross stitch
2 No. of thread passes required : 8 x 8
3 Rabbit ears of 0.5 cm length to be maintained. OK
4 Invisible shanking required to ensure proper button closure
5 Button must be attached with button locking machine
SPI (STITCH PER INCH):
SL. NO. COMPONENTS
1 ALL SEAMS: 12 to 14 UNEVEN
2 ALL STITCHES 12 to 14 UNEVEN
LABEL PLACEMENT
SL. NO. COMPONENTS
1 MAIN LABEL boat label at c.back Inserted into waist band seam OK
2 SIZE LABEL bottom of main label at the middle OK
3 WASHCARE LABEL at back 1" away from main label inserted into waist band seam OK
4 COMPOSITION LABEL Under washcare label OK
5 PH/VENDOR LABEL Under composition label at the middle OK
COMMENTS:
* ORIGINAL SAMPLE TO ACCOMPANY PROTO
* ORIGINAL SAMPLE TO ACCOMPANY SIZE SET
* ORIGINAL, PROTO & S.S SAMPLE TO ACCOMPANY PP
* MAKE PP SAMPLE IN SIZE 26 AND 38