Head to www.savemyexams.

com for more awesome resources

Cambridge (CIE) IGCSE Physics Your notes

Light
Contents
Reflection of Light
Investigating Reflection
Refraction of Light
Refractive Index
Total Internal Reflection
Ray Diagrams
Real & Virtual Images
Real Images
Virtual Images
Correcting Sight
Dispersion of Light

Page 1 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Reflection of Light
Your notes
Ray diagrams
In optics, a normal line is drawn at right angles to the boundary between two media
In reflection, angles are measured between the ray (showing the wave direction) and the normal line
The angle of the wave approaching the boundary is called the angle of incidence (i)
The angle of the wave leaving the boundary is called the angle of reflection (r)
When drawing a ray diagram an arrow is used to show the direction the wave is travelling
An incident ray has an arrow pointing towards the boundary
A reflected ray has an arrow pointing away from the boundary

Ray diagram of reflection

A ray diagram for light reflecting at a boundary, showing the normal, angle of incidence and angle of
reflection

The law of reflection

The law of reflection states that the angles of incidence and reflection are equal:

Page 2 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Angle of incidence (i) = Angle of reflection (r)

This law of reflection is used in many devices such as: Your notes
mirrors
cameras
optical fibres
periscopes

Reflection in a plane mirror

When an object is placed in front of a plane mirror, an image of that object can be seen in the mirror
The image will be:
The same size as the object
The same distance behind the mirror as the object is in front of it
Virtual
A plane mirror defines a flat, smooth and polished surface
The formation of this image can be understood by drawing a ray diagram

Ray diagram showing reflection in a plane mirror

Page 3 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Your notes

Diagram showing the formation of an image in a mirror by the reflection of light

Each incident ray on the diagram above can be drawn following these steps:
Light from the object hits the mirror, reflecting from it (i=r)
To an observer, the reflected ray appears to have come from behind the mirror
The reflected ray can be traced back in this same direction behind the mirror, forming a virtual ray
This process is repeated for another ray travelling in a slightly different direction
An image of the object will appear where these two virtual rays cross
The type of image formed in the mirror is called a virtual image because of the divergence of the rays
from the image
It cannot be projected onto a piece of paper (because the rays don’t go through the image)

Page 4 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Examiner Tips and Tricks Your notes

When drawing light waves being reflected take care to get the angle about right.
If they are slightly out it won’t be a problem, but if there is an obvious difference between the angle
of incidence and the angle of reflection then you will probably lose a mark.

Page 5 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Investigating Reflection
Your notes
Investigating reflection
Extended tier only

Aims of the experiment

To investigate reflection by a Plane mirror

Variables
Independent variable = angle of incidence, i
Dependent variable = angle of reflection, r
Control variables:
Distance of ray box from mirror
Width of the light beam
Same frequency / wavelength of the light

Equipment list
Equipment Purpose

Ray Box To provide a narrow beam of light that can be easily refracted

Protractor To measure the angles of incidence and refraction

Sheet of Paper To mark the lines indicating the incident and refracted rays

Pencil To draw the incident and refracted ray lines onto the paper

Ruler To draw the incident and refracted ray lines onto the paper

Plane mirror To reflect the light beam

Method

Page 6 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Your notes

Apparatus to investigate reflection

1. Set up the apparatus as shown in the diagram
2. In the middle of the paper use a ruler to mark a straight line about 10 cm long
3. Use a protractor to draw a 90° line that bisects (cuts in half) the 10 cm line
4. Place the mirror on the first line as shown in the diagram above
5. Switch on the ray box and aim a beam of light at the point where the two drawn lines cross at an angle
6. Use the pencil to mark two positions of the light beam:
A point just after leaving the ray box
The point on the reflected beam about 10 cm away from the mirror
7. Remove the ray box and mirror
8. Use a ruler to join the two marked positions to the point where the originally drawn lines crossed
9. Use the protractor to measure the two angles from the 90° line. The angle for the ray towards the mirror
is the angle of incidence, and the other is the angle of reflection
10. Repeat the experiment three times with the beam of light aimed at different angles

Page 7 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Results
Example results table Your notes

Angle of incidence, i (°) Angle of reflection, r (°)

10

30

45

80

Analysis of results
The law of reflection states:
i=r
Where:
i = angle of incidence in degrees (°)
r = angle of reflection in degrees (°)
If the experiment was carried out correctly, the angles of incidence and reflection should be the same

Evaluating the experiment

Systematic errors
An error could occur if the 90° lines are drawn incorrectly
Use a set square to draw perpendicular lines
If the mirror is distorted, this could affect the reflection angle, so make sure there are little to no
blemishes on it
Random errors
The points for the incoming and reflected beam may be inaccurately marked
Use a sharpened pencil and mark in the middle of the beam
The protractor resolution may make it difficult to read the angles accurately

Page 8 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Use a protractor with a higher resolution

Safety considerations
Your notes
The ray box light could cause burns if touched
Run burns under cold running water for at least five minutes
Looking directly into the light may damage the eyes
Avoid looking directly at the light
Stand behind the ray box during the experiment
Keep all liquids away from the electrical equipment and paper
Take care using the mirror
Damages on the mirror can affect the outcome of the reflection experiment

Page 9 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Refraction of Light
Your notes
Ray diagrams for refraction
In refraction, angles are measured between the ray (showing the direction of the wave) and the normal
line
The angle of the wave approaching the boundary is called the angle of incidence (i)
The angle of the wave leaving the boundary is called the angle of refraction (r)
When drawing a ray diagram an arrow is used to show the direction the wave is travelling
An incident ray has an arrow pointing towards the boundary
A refracted ray has an arrow pointing away from the boundary
The angles of incidence and refraction are usually labelled i and r respectively

Refraction ray diagram

A ray diagram for light refracting at a boundary, showing the normal, angle of incidence and angle of
refraction

Page 10 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Refraction of light
Refraction occurs when light passes a boundary between two different transparent materials Your notes

At the boundary, the rays of light change direction

This change in direction depends on the difference in density between the two media:
From less dense to more dense (e.g air to glass), light bends towards the normal
From more dense to less dense (e.g. glass to air), light bends away from the normal
When passing along the normal (perpendicular) the light does not bend at all
Note that when a light wave enters and leaves the glass block there are two boundaries
The refracted ray at the first boundary becomes the incident ray at the second boundary

Refraction diagram of light from air through a glass block

How to construct a ray diagram showing the refraction of light as it passes through a rectangular block
The change in direction occurs due to the change in speed when travelling in different substances
When light passes into a denser substance, the waves will slow down; hence, they bend towards
the normal
The only properties that change during refraction are speed and wavelength – the frequency of waves
does not change

Page 11 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Different frequencies account for different colours of light (red has a low frequency, whilst blue
has a high frequency)
Your notes
When light refracts, it does not change colour (think of a pencil in a glass of water), therefore, the
frequency does not change

Examiner Tips and Tricks

Practice drawing refraction diagrams as much as you can! It's very important to remember which
way the light bends when it crosses a boundary:
As the light enters the block it bends towards the normal line
Remember: Enters Towards
When it leaves the block it bends away from the normal line
Remember: Leaves Away
You only need to know about light passing through the boundaries between two media.

Investigating Refraction
Aims of the experiment
To investigate the refraction of light using rectangular blocks, semi-circular blocks and triangular
prisms

Variables
Independent variable = shape of the block
Dependent variable = angle of refraction
Control variables:
Width of the light beam
Same frequency / wavelength of the light

Equipment list
Equipment Purpose

Page 12 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Ray box To provide a narrow beam of light that can be easily

refracted
Your notes
Protractor To measure the angles of incidence and refraction

Sheet of paper To mark the lines indicating the incident and refracted
rays

Pencil To draw the incident and refracted ray lines onto the
paper

Ruler To draw the incident and refracted ray lines onto the
paper

Perspex blocks (rectangular, semi-circular & To refract the light beam

prism)

Resolution of measuring equipment:

Protractor = 1°
Ruler = 1 mm

Refraction diagram for equipment

Page 13 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Your notes

Diagram showing a ray box alongside three different-shaped glass blocks

Method
Refraction diagram set up

Page 14 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Your notes

Apparatus to investigate refraction

1. Place the glass block on a sheet of paper, and carefully draw around the rectangular perspex block
using a pencil
2. Switch on the ray box and direct a beam of light at the side face of the block
3. Mark on the paper:
A point on the ray close to the ray box
The point where the ray enters the block
The point where the ray exits the block
A point on the exit light ray which is a distance of about 5 cm away from the block
4. Draw a dashed line normal (at right angles) to the outline of the block where the points are
5. Remove the block and join the points marked with three straight lines
6. Replace the block within its outline and repeat the above process for a ray striking the block at a
different angle
7. Repeat the procedure for each shape of perspex block (prism and semi-circular)

Analysis of results
Page 15 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Consider the light paths through the different-shaped blocks

Refraction experiment results with different media Your notes

Refraction of light through different shapes of perspex blocks

The final diagram for each shape will include multiple light ray paths for the different angles of
incidences (i) at which the light strikes the blocks
This will help demonstrate how the angle of refraction (r) changes with the angle of incidence
Label these paths clearly with (1) (2) (3) or A, B, C to make these clearer
Use the laws of refraction to analyse these results

Evaluating the experiment

Systematic errors
An error could occur if the 90° lines are drawn incorrectly
Use a set square to draw perpendicular lines
Random errors

Page 16 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

The points for the incoming and reflected beam may be inaccurately marked
Use a sharpened pencil and mark in the middle of the beam Your notes
The protractor resolution may make it difficult to read the angles accurately
Use a protractor with a higher resolution

Safety considerations
The ray box light could cause burns if touched
Run burns under cold running water for at least five minute
Looking directly into the light may damage the eyes
Avoid looking directly at the light
Stand behind the ray box during the experiment
Keep all liquids away from the electrical equipment and paper

Examiner Tips and Tricks

In your examination, you might be asked to write a method explaining how you might investigate the
refraction of light through different shaped blocks
As part of this method you should describe:
What equipment you need
How you will use the equipment
How you will trace the rays of light before, while and after they pass through the block

Page 17 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Refractive Index
Your notes
Refractive index as a ratio of speed
Extended tier only
The refractive index can be calculated in two different ways:
1. Using the ratio of speeds
2. Using the ratio of angles
The refractive index is a number that is always larger than 1 and is different for different materials
Objects which are more optically dense have a higher refractive index, e.g. n is about 2.4 for
diamond
Objects which are less optically dense have a lower refractive index, e.g. n is about 1.5 for glass
Since the refractive index is a ratio, it has no units
The refractive index, n, for the ratio of speeds, is defined as:
The ratio of the speeds of a wave in two different regions
The refractive index, n, for the ratio of speeds, is given by the equation:

speed of light in a vacuum

n=
speed of light in a material

Refractive index as a ratio of angles

Extended tier only
The refractive index, n, for the ratio of angles, is defined as:
The ratio of the sine of the angle of incidence and the sine of the angle of reflection of a wave in two
different regions
The refractive index, n, for the ratio of angles, is given by the equation:

sin i
n=
sin r
Where:
n = the refractive index of the material

Page 18 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

i = angle of incidence of the light (°)

r = angle of refraction of the light (°) Your notes
This equation can be rearranged with the help of the formula triangle:

A refractive index formula triangle

Formula triangle for the refractive index in terms of angles

See the example of Speed & velocity which explains how to use the formula triangle to rearrange
equations

Worked Example

Page 19 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

A ray of light enters a glass block of refractive index 1.53 making an angle of 15° with the normal
before entering the block.
Your notes
Calculate the angle it makes with the normal after it enters the glass block.

Answer:
Step 1: List the known quantities
Refractive index of glass, n = 1.53
Angle of incidence, i = 15°
Step 2: Write the equation for refractive index in terms of the ratio of angles

sin i
n=
sin r
Step 3: Rearrange the equation and calculate sin (r)

sin i
sin r =
n
sin 15
sin r =
1 . 53
sin r = 0 . 1692
Step 4: Find the angle of refraction (r) by using the inverse sin function

r = sin−1 (0 . 1692)
r = 9 . 7 = 10°

Examiner Tips and Tricks

sin i
n= is also known as Snell's law but you do not need to know this for your exam.
sin r
sin i i
Important: ( ) is not the same as ( ). Incorrectly cancelling the sin terms is a very common
sin r r
mistake!

Page 20 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

When calculating the value of i or r start by calculating the value of sin i or sin r.
You can then use the inverse sin function (sin–1 on most calculators by pressing 'shift' then 'sine') to Your notes
find the angle.
One way to remember which way around i and r are in the fraction is remembering that 'i' comes
before 'r' in the alphabet, and therefore is on the top of the fraction (whilst r is on the bottom).

Page 21 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Total Internal Reflection

Your notes
Total internal reflection
Total internal reflection (TIR) occurs at the boundary between two media when:
All the incident ray in medium 1 is reflected back into medium 1
When light passes between the boundary of an optically dense to a less dense medium and the angles
of incidence are small
The refracted ray is strong
The reflected ray is weak
The weak ray is reflected back into the denser medium
This means some internal reflection occurs
It is not TIR because not all of the ray is reflected, only some of it

Comparing refraction and total internal reflection

Page 22 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Refraction happens when the angle of incidence is smaller and total internal reflection happens when
the angle of incidence equals the angle of reflection
Your notes
Comparing internal reflection and total internal reflection
Normal reflection produces a less intense light compared to TIR
In TIR the light ray is brighter and more intense
Normal reflection occurs independent of the refractive indices of both media
For TIR to occur, the incident material must be denser than the second material

Conditions for internal reflection

Total internal reflection happens with the angle of incidence is bigger than the critical angle

Internal reflection examples

Thin film interference is an example of internal reflection
An example of this is the shiny side of a CD

Example of internal reflection

Page 23 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Your notes

The colourful pattern observed on a CD is a result of thin film interference

Other examples of thin film interference include:
Soap bubbles
Thin layers of oil on water
In these examples, internal reflection occurs at the boundaries between:
Air and water
Water and oil
A spectrum of colours will be seen by the observer due to the rays partially reflected at the boundary

A ray diagram of an example of internal reflection

Page 24 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Your notes

Light is reflected and transmitted at the boundary from a less dense to a more dense material. Light is
transmitted only at the boundary from a more dense to a less dense material. Hence, in this diagram P
and Q exist but the third unlabelled ray does not.

Total internal reflection examples

Total internal reflection is used to reflect light along optical fibres, meaning they can be used for
communications
endoscopes
decorative lamps
Light travelling down an optical fibre is totally internally reflected each time it hits the edge of the fibre

Total internal reflection example: optical fibre

Page 25 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Your notes

Optical fibres utilise total internal reflection for communications

Prisms are used in a variety of optical instruments, including:
Periscopes
Binoculars
Telescopes
Cameras
Safety reflectors
A periscope is a device that can be used to see over tall objects
It consists of two right-angled prisms

Total internal reflection example: a periscope

Page 26 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Your notes

Reflection of light through a periscope

The light totally internally reflects in both prisms

Examiner Tips and Tricks

If asked to name the phenomena make sure you give the whole name – total internal reflection
Remember: total internal reflection occurs when light travels from a denser material to less dense
material and ALL of the light is reflected.
If asked to give an example of a use of total internal reflection, first state the name of the object that
causes the reflection (e.g. a right-angled prism) and then name the device in which it is used (e.g. a
periscope)

Critical angle
At the boundary between a more dense and a less dense medium, as the angle of incidence is
increased, the angle of refraction also increases until it gets closer to 90°
When the angle of refraction is exactly 90° the light is refracted along the boundary
At this point, the angle of incidence is known as the critical angle c

Page 27 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Obtaining total internal reflection examples

Your notes

As the angle of incidence increases it will eventually surplus the critical angle and lead to total internal
reflection of the light
When the angle of incidence is larger than the critical angle, the refracted ray is now reflected
This is total internal reflection

Worked Example
A glass cube is held in contact with a liquid and a light ray is directed at a vertical face of the cube.
The angle of incidence at the vertical face is 39° and the angle of refraction is 25° as shown in the
diagram. The light ray is totally internally reflected for the first time at X.

Page 28 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Your notes

Complete the diagram to show the path of the ray beyond X to the air and calculate the critical angle
for the glass-liquid boundary.

Answer:

Step 1: Draw the reflected angle at the glass-liquid boundary

When a light ray is reflected, the angle of incidence = angle of reflection
Therefore, the angle of incidence (or reflection) is 90° – 25° = 65°

Page 29 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Step 2: Draw the refracted angle at the glass-air boundary

At the glass-air boundary, the light ray refracts away from the normal Your notes
Due to the reflection, the light rays are symmetrical to the other side
Step 3: Calculate the critical angle
The question states the ray is “totally internally reflected for the first time” meaning that this is
the lowest angle at which TIR occurs
Therefore, 65° is the critical angle

Examiner Tips and Tricks

If you are asked to explain what is meant by the critical angle in an exam, you can be sure to gain full
marks by drawing and labelling the same diagram above (showing the three semi-circular blocks)

Refractive index & critical angle equation

Extended tier only
The critical angle, c, of a material, is related to its refractive index, n
The relationship between the two quantities is given by the equation:

1
sin c =
n
This can also be rearranged to calculate the refractive index, n:

1
n=
sin c
This equation shows that:
The larger the refractive index of a material, the smaller the critical angle
Light rays inside a material with a high refractive index are more likely to be totally internally
reflected

Worked Example

Page 30 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Opals and diamonds are transparent stones used in jewellery. Jewellers shape the stones so that
light is reflected inside. Compare the critical angles of opal and diamond and explain which stone
would appear to sparkle more. Your notes
The refractive index of opal is about 1.5
The refractive index of diamond is about 2.4

Answer:
Step 1: List the known quantities
Refractive index of opal, no = 1.5
Refractive index of diamond, nd = 2.4
Step 2: Write out the equation relating critical angle and refractive index

1
sin c =
n
Step 3: Calculate the critical angle of opal (co)

1
sin( c o ) = = 0 . 6667
1.5
c o = sin−1 (0 . 6667) = 41. 8 = 42°
Step 4: Calculate the critical angle of diamond (cd)

1
sin( c d ) = = 0 . 4167
2.4
c d = sin – 1 (0 . 4167) = 24. 6 = 25°
Step 5: Compare the two values and write a conclusion
Total internal reflection occurs when the angle of incidence of light is larger than the critical
angle (i > c)
In opal, total internal reflection will occur for angles of incidence between 42° and 90°
The critical angle of diamond is lower than the critical angle of opal (co > cd)
This means light rays will be totally internally reflected in diamond over a larger range of angles
(25° to 90°)
Therefore, more total internal reflection will occur in diamond hence it will appear to sparkle
more than the opal

Page 31 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Your notes
Examiner Tips and Tricks
When calculating the value of the critical angle using the above equation:
First use the refractive index, n, to find sin(c)
Then use the inverse sin function (sin–1) to find the value of c

Optical fibres
Extended tier only
Optical fibres have many uses, particularly in telecommunications
Endoscopes are used to look within the human body
A camera on the end of an optical fibre is placed down the throat and moved into the stomach
Light from inside the stomach is captured by the camera, is totally internally reflected along the
optical fibre and viewed by doctors through the eyepiece

Total internal reflection example: endoscope

Page 32 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Your notes

Page 33 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Your notes

Endoscopes utilise total internal reflection to see inside a patient's body

Total internal reflection using telecommunication

Optical fibres can be used to transmit:
Home (landline) telephone signals
Internet signals
Cable television signals
In phone calls from landline phones:
Electrical signals are converted to light pulses
That travel close to the speed of light along optical fibres
At the receiving end, the digital signal is converted into sound

Total internal reflection example: landline telephone signal path

Sound from a landline telephone travels through optical fibres to the landline of the person listening
Optical fibres are installed:
In cables attached to telephone (or telegraph) poles in the street

Page 34 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Underground from the service box to the telegraph pole or under the sea
Total internal reflection example: telegraph poles
Your notes

Fibre optic cables can be found in the phone cables attached between the telephone poles and the
street

Page 35 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Ray Diagrams
Your notes
Features of ray diagrams
Ray diagrams can be described using the following terms:
Principal axis
Principal focus, or focal point
Focal length
The principal axis is defined as:
A line which passes through the centre of a lens
The principal focus, or focal point, is defined as:
The point at which rays of light travelling parallel to the principal axis intersect the principal axis and
converge or the point at which diverging rays appear to proceed
Focal length is defined as:
The distance between the centre of the lens and the principal focus

Converging & Diverging Lenses

A lens is a piece of equipment that forms an image by refracting light
There are two types of lens:
Converging
Diverging

Converging lenses
In a converging lens, parallel rays of light are brought to a focus
This point is called the principal focus
This lens is sometimes referred to as a convex lens
The distance from the lens to the principal focus is called the focal length
This depends on how curved the lens is
The more curved the lens, the shorter the focal length

Page 36 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Converging lens diagram

Your notes

The focal length is the distance from the lens to the principal focus

Diverging lenses
In a diverging lens, parallel rays of light are made to diverge (spread out) from a point
This lens is sometimes referred to as a concave lens
The principal focus is now the point from which the rays appear to diverge from

Diverging lens diagram

Page 37 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Your notes

Parallel rays from a diverging lens appear to come from the principal focus

Representing lenses
In diagrams, the following symbols are often used to represent each type of lens:

Converging and diverging lens symbols

Page 38 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Your notes

Concave and convex lens symbols

Examiner Tips and Tricks

To remember which lens is converging or diverging, think of the following: Convex lens =
Converging. You need to be able to describe how the lenses affect the light rays.

Page 39 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Real & Virtual Images

Your notes
Real images & virtual images
Images produced by lenses can be one of two types:
A real image
A virtual image
Images can be described compared to their object as:
Enlarged/same size/diminished
Upright/inverted
Real/virtual

Real images
A real image is defined as:
An image that is formed when the light rays from an object converge and meet each other and can be
projected onto a screen
A real image is one produced by the convergence of light towards a focus
Real images are always inverted
Real images can be projected onto pieces of paper or screens
An example of a real image is the image formed on a cinema screen

A real image

Page 40 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Your notes

A real image can be projected onto a screen

Virtual images
A virtual image is defined as:
An image that is formed when the light rays from an object do not meet but appear to meet behind the
lens and cannot be projected onto a screen
A virtual image is formed by the divergence of light away from a point
Virtual images are always upright
Virtual images cannot be projected onto a piece of paper or a screen
An example of a virtual image is a person's reflection in a mirror

A virtual image

Page 41 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Your notes

A reflection in a mirror is an example of a virtual image

Page 42 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Real Images
Your notes
Converging lens - real image
Constructing converging ray diagrams
The three main rules for constructing ray diagrams are as follows:
1. Rays passing through the principal axis will pass through the optical centre of the lens undeviated

2. Rays that are parallel to the principal axis will be refracted and pass through the focal point f

Page 43 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Your notes
3. Rays passing through the focal point f will emerge parallel to the principal axis

Drawing converging ray diagrams of real images

For an object placed at a distance greater than 2 focal lengths...

A converging lens ray diagram for an object placed further than 2f

Page 44 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

The image that forms will have the following properties:

The image forms... between f and 2f Your notes

The nature of the image is... real

The orientation of the image is... inverted

The size of the image is... diminished

For an object placed at a distance equal to 2 focal lengths...

A converging lens ray diagram for an object placed at 2f

The image that forms will have the following properties:

The image forms... at 2f

The nature of the image is... real

The orientation of the image is... inverted

Page 45 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

The size of the image is... the same

Your notes

For an object placed at a distance between 1 and 2 focal lengths

A converging lens ray diagram for an object placed between f and 2f

The image that forms will have the following properties:

The image forms... beyond 2f

The nature of the image is... real

The orientation of the image is... inverted

The size of the image is... magnified

Worked Example

Page 46 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Draw a ray diagram to show how a converging lens can be used to form a diminished image of a real
object.
Your notes
Label the object, image and principal foci of the lens on your diagram.

Answer:
Step 1: Start by drawing and labelling a principal axis and the lens as a line or a very thin ellipse

Step 2: Mark and label the focal points on each side of the lens

Step 3: Draw and label the object at a distance greater than the focal length on the left side of the
lens

Page 47 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Your notes

Tip: For a diminished image the object should be placed a distance of at least 2F away from the
lens
Step 4: Draw a ray through the optical centre of the lens

Step 5: Draw a second ray from the object to the lens which is parallel to the principal axis

Step 6: Draw the continuation of the ray passing through the focal point on the right side of the
lens

Page 48 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Your notes

Step 7: Draw and label the image at the point where the rays meet

Step 8: Check your final image and make sure everything is included to gain the marks

For a three-mark question, examiners will be looking for:

One ray drawn through the optical centre of the lens
A second ray drawn which produces a diminished (smaller) image (which must pass through
a labelled focal point)

Page 49 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Both the object and the image must be drawn and labelled correctly

Your notes

Page 50 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Virtual Images
Your notes
Converging lens - virtual image
Extended tier only

Constructing converging ray diagrams of virtual images

A single lens placed at a distance less than the focal length of an object can be used as a magnifying
glass

A converging lens ray diagram for an object placed less than f

Ray diagram showing light converging through a magnifying glass to form a magnified virtual image
The image that forms will have the following properties:

The image forms... at 2f (on the same side as the object)

The nature of the image is... virtual

The orientation of the image is... upright

The size of the image is... magnified

Page 51 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Diverging lens - virtual image

Your notes
Image formation by a diverging lens
No matter the position of the object all images formed by diverging lenses are:
Virtual (and not real)
Upright (the same as the object)
Diminished (smaller than the object)
On the same side of the lens as the object
For an object placed at any distance away from the lens (further than the focal point or closer than):
The ray of light incident on the centre of the lens does not change direction
The rays of light parallel to the principal axis are refracted
These rays can be extrapolated backwards
It appears that they come from a virtual focus
A visible projection cannot be formed on a screen

Virtual image produced by a diverging lens with object beyond f

Page 52 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

A diverging lens always produces a virtual image no matter the position of the object in relation to the
focal point or the lens. Here the object is further away from the lens than the focal point.
Your notes

Virtual image produced by a diverging lens with object closer than f

A diverging lens always produces a virtual image no matter the position of the object in relation to the
focal point or the lens. Here the object is closer to the lens than the focal point.

Comparing converging & diverging lenses

The image produced by a converging lens can be either real or virtual
This means the image can be inverted (real) or upright (virtual)
The image produced by a diverging lens is always virtual
This means the image will always be upright

Worked Example
Page 53 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

An object is placed outside the focal point of a diverging lens.

Your notes

Complete the ray diagram by drawing where the image of this object will be seen.

Answer:

Page 54 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Your notes

Step 1: Draw a line from the top of the object through the middle of the lens
The top of the image lies somewhere along this line
Step 2: Draw a line from the focal point through the top of the lens
The dashed line shows the continuation of the upward arrow
The top of the image is where the two lines cross

Examiner Tips and Tricks

You are not expected to draw ray diagrams for a diverging lens but you must be able to explain how
the virtual images are formed.

Page 55 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Correcting Sight
Your notes
Correcting sight
Extended tier only
Converging and diverging lenses are commonly used in glasses and contact lenses to correct defects
of sight
Converging lenses can be used to correct long-sighted vision
Diverging lenses can be used to correct short-sighted vision

Use of lenses to correct long-sightedness

Long-sighted people have eyes that are less curved than normal or the eyeball is too short
This means they cannot see things that are close and can only clearly see things that are far away

Ray diagram to show long-sightedness

An eye that is long-sighted has a narrower lens with a smaller focussing power so the light rays meet and
form an image behind the retina and not on it
Page 56 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

The eye refracts the light rays and they are brought to a focus beyond the retina
In other words, the focus point is behind the retina at the back of the eye Your notes
This can be corrected by using a convex or converging lens

The effect of a diverging lens on a long-sighted eye

The converging lens causes the rays to converge before they reach the eye, so the image is formed on
the retina and not behind it

Use of lenses to correct short-sightedness

People who are short-sighted have eyes that are more curved than normal or have an eyeball that is
too long
This means they cannot see things that are far away, and only see things that are close to them

Ray diagram of short-sightedness

Page 57 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Your notes

An eye that is short-sighted has a wider lens with a larger focussing power so the light rays meet and
form an image in front of the retina and not on it
This is because the eye refracts the light and brings it to a focus before it reaches the retina
In other words, the focus point is in front of the retina at the back of the eye
This can be corrected by using a concave or a diverging lens

The effect of a diverging lens on a short-sighted eye

Page 58 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Your notes

The diverging lens causes the rays to diverge before they reach the eye, so the image is formed on the
retina and not in front of it

Page 59 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Dispersion of Light
Your notes
Dispersion of light
The dispersion of light is illustrated by the refraction of white light by a glass prism
White light contains the wavelengths of all the colours of the spectrum
Each colour has a different wavelength (and frequency), making up a very narrow part of the
electromagnetic spectrum
White light may be separated into all its colours by passing it through a glass prism
This is done by refraction
Violet light is refracted the most, whilst red light is refracted the least
This splits up the colours to form a spectrum
This process is similar to how a rainbow is created

Dispersion of light through a prism

White light may be separated into all its colours by passing it through a prism

Page 60 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

The visible spectrum of light

Visible light is the only part of the spectrum detectable by the human eye Your notes

In the natural world, many animals, such as birds, bees and certain fish, can perceive beyond visible
light and can see infra-red and UV wavelengths of light
The seven different colours of visible light waves correspond to different wavelengths
In order of longest wavelength and lowest frequency to shortest wavelength and highest frequency :
Red
Orange
Yellow
Green
Blue
Indigo
Violet

The dispersion of light creates the seven colours of the visible

spectrum

The colours of the visible spectrum: red has the longest wavelength; violet has the shortest

Page 61 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers
 Head to www.savemyexams.com for more awesome resources

Your notes
Examiner Tips and Tricks
To remember the colours of the visible spectrum you could remember either:
The name “Roy G. Biv”
Or the saying “Richard Of York Gave Battle In Vain”

Monochromatic light
Extended tier only
A visible light source of a single frequency (a single colour) is monochromatic
A laser beam is monochromatic because it emits a single colour of light

A laser beam

The laser emits monochromatic green light

Page 62 of 62
© 2015-2024 Save My Exams, Ltd. · Revision Notes, Topic Questions, Past Papers